From: Michal Nazarewicz <mina86@mina86.com>
To: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, linux-mm@kvack.org
Cc: m.szyprowski@samsung.com, minchan@kernel.org, mgorman@suse.de,
kyungmin.park@samsung.com
Subject: Re: [PATCH 2/4] cma: count free CMA pages
Date: Fri, 24 Aug 2012 18:42:39 +0200 [thread overview]
Message-ID: <xa1twr0o2qdc.fsf@mina86.com> (raw)
In-Reply-To: <1345805120-797-3-git-send-email-b.zolnierkie@samsung.com>
[-- Attachment #1: Type: text/plain, Size: 4992 bytes --]
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> writes:
> Add NR_FREE_CMA_PAGES counter to be later used for checking watermark
> in __zone_watermark_ok(). For simplicity and to avoid #ifdef hell make
> this counter always available (not only when CONFIG_CMA=y).
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index e9bbd7c..e28e506 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -559,6 +559,9 @@ static inline void __free_one_page(struct page *page,
> clear_page_guard_flag(buddy);
> set_page_private(page, 0);
> __mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
> + if (is_cma_pageblock(page))
Is reading pageblock's type necessary here? You have migratetype
variable.
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + 1 << order);
> } else {
> list_del(&buddy->lru);
> zone->free_area[order].nr_free--;
> @@ -674,6 +677,8 @@ static void free_pcppages_bulk(struct zone *zone, int count,
> /* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
> __free_one_page(page, zone, 0, page_private(page));
> trace_mm_page_pcpu_drain(page, 0, page_private(page));
> + if (is_cma_pageblock(page))
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
Like above, I think that checking page_private(page) should be enough.
> } while (--to_free && --batch_free && !list_empty(list));
> }
> __mod_zone_page_state(zone, NR_FREE_PAGES, count);
> @@ -688,8 +693,12 @@ static void free_one_page(struct zone *zone, struct page *page, int order,
> zone->pages_scanned = 0;
>
> __free_one_page(page, zone, order, migratetype);
> - if (get_pageblock_migratetype(page) != MIGRATE_ISOLATE)
> + if (get_pageblock_migratetype(page) != MIGRATE_ISOLATE) {
> __mod_zone_page_state(zone, NR_FREE_PAGES, 1 << order);
> + if (is_cma_pageblock(page))
You are reading pageblock's migratetype twice. Please use temporary
variable.
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + 1 << order);
> + }
> spin_unlock(&zone->lock);
> }
>
> @@ -756,6 +765,11 @@ void __meminit __free_pages_bootmem(struct page *page, unsigned int order)
> }
>
> #ifdef CONFIG_CMA
> +bool is_cma_pageblock(struct page *page)
> +{
> + return get_pageblock_migratetype(page) == MIGRATE_CMA;
> +}
> +
> /* Free whole pageblock and set it's migration type to MIGRATE_CMA. */
> void __init init_cma_reserved_pageblock(struct page *page)
> {
> @@ -813,6 +827,9 @@ static inline void expand(struct zone *zone, struct page *page,
> set_page_private(&page[size], high);
> /* Guard pages are not available for any usage */
> __mod_zone_page_state(zone, NR_FREE_PAGES, -(1 << high));
> + if (is_cma_pageblock(&page[size]))
Like before, why not is_migrate_cma(migratetype)?
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + -(1 << high));
> continue;
> }
> #endif
> @@ -1414,8 +1434,12 @@ int split_free_page(struct page *page, bool check_wmark)
> zone->free_area[order].nr_free--;
> rmv_page_order(page);
>
> - if (get_pageblock_migratetype(page) != MIGRATE_ISOLATE)
> + if (get_pageblock_migratetype(page) != MIGRATE_ISOLATE) {
> __mod_zone_page_state(zone, NR_FREE_PAGES, -(1UL << order));
> + if (is_cma_pageblock(page))
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + -(1UL << order));
> + }
Please use temporary variable. :)
>
> /* Split into individual pages */
> set_page_refcounted(page);
> diff --git a/mm/page_isolation.c b/mm/page_isolation.c
> index d210cc8..b8dba12 100644
> --- a/mm/page_isolation.c
> +++ b/mm/page_isolation.c
> @@ -77,11 +77,15 @@ int set_migratetype_isolate(struct page *page)
> out:
> if (!ret) {
> unsigned long nr_pages;
> + int mt = get_pageblock_migratetype(page);
>
> set_pageblock_isolate(page);
> nr_pages = move_freepages_block(zone, page, MIGRATE_ISOLATE);
>
> __mod_zone_page_state(zone, NR_FREE_PAGES, -nr_pages);
> + if (mt == MIGRATE_CMA)
is_migrate_cma()
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + -nr_pages);
> }
>
> spin_unlock_irqrestore(&zone->lock, flags);
> @@ -102,6 +106,9 @@ void unset_migratetype_isolate(struct page *page, unsigned migratetype)
> goto out;
> nr_pages = move_freepages_block(zone, page, migratetype);
> __mod_zone_page_state(zone, NR_FREE_PAGES, nr_pages);
> + if (migratetype == MIGRATE_CMA)
is_migrate_cma()
> + __mod_zone_page_state(zone, NR_FREE_CMA_PAGES,
> + nr_pages);
> restore_pageblock_isolate(page, migratetype);
> out:
> spin_unlock_irqrestore(&zone->lock, flags);
--
Best regards, _ _
.o. | Liege of Serenely Enlightened Majesty of o' \,=./ `o
..o | Computer Science, Michał “mina86” Nazarewicz (o o)
ooo +----<email/xmpp: mpn@google.com>--------------ooO--(_)--Ooo--
[-- Attachment #2.1: Type: text/plain, Size: 0 bytes --]
[-- Attachment #2.2: Type: application/pgp-signature, Size: 835 bytes --]
next prev parent reply other threads:[~2012-08-24 16:42 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-24 10:45 [PATCH 0/4] cma: fix watermark checking Bartlomiej Zolnierkiewicz
2012-08-24 10:45 ` [PATCH 1/4] cma: fix counting of isolated pages Bartlomiej Zolnierkiewicz
2012-08-24 16:26 ` Michal Nazarewicz
2012-08-24 10:45 ` [PATCH 2/4] cma: count free CMA pages Bartlomiej Zolnierkiewicz
2012-08-24 16:42 ` Michal Nazarewicz [this message]
2012-08-24 10:45 ` [PATCH 3/4] mm: add accounting for CMA pages and use them for watermark calculation Bartlomiej Zolnierkiewicz
2012-08-24 10:45 ` [PATCH 4/4] cma: fix watermark checking Bartlomiej Zolnierkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=xa1twr0o2qdc.fsf@mina86.com \
--to=mina86@mina86.com \
--cc=b.zolnierkie@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-mm@kvack.org \
--cc=m.szyprowski@samsung.com \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox