linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: yangerkun <yangerkun@huaweicloud.com>
To: cel@kernel.org, Hugh Dickins <hughd@google.com>,
	Christian Brauner <brauner@kernel.org>,
	Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org, linux-mm@kvack.org,
	yukuai3@huawei.com, Chuck Lever <chuck.lever@oracle.com>
Subject: Re: [PATCH v6 2/5] Revert "libfs: Add simple_offset_empty()"
Date: Mon, 23 Dec 2024 22:17:14 +0800	[thread overview]
Message-ID: <f072048e-fec4-22bb-76ff-dbafe3a7fa78@huaweicloud.com> (raw)
In-Reply-To: <20241220153314.5237-3-cel@kernel.org>

LGTM

Reviewed-by: Yang Erkun <yangerkun@huawei.com>

在 2024/12/20 23:33, cel@kernel.org 写道:
> From: Chuck Lever <chuck.lever@oracle.com>
> 
> simple_empty() and simple_offset_empty() perform the same task.
> The latter's use as a canary to find bugs has not found any new
> issues. A subsequent patch will remove the use of the mtree for
> iterating directory contents, so revert back to using a similar
> mechanism for determining whether a directory is indeed empty.
> 
> Only one such mechanism is ever needed.
> 
> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
> ---
>   fs/libfs.c         | 32 --------------------------------
>   include/linux/fs.h |  1 -
>   mm/shmem.c         |  4 ++--
>   3 files changed, 2 insertions(+), 35 deletions(-)
> 
> diff --git a/fs/libfs.c b/fs/libfs.c
> index 3da58a92f48f..8380d9314ebd 100644
> --- a/fs/libfs.c
> +++ b/fs/libfs.c
> @@ -329,38 +329,6 @@ void simple_offset_remove(struct offset_ctx *octx, struct dentry *dentry)
>   	offset_set(dentry, 0);
>   }
>   
> -/**
> - * simple_offset_empty - Check if a dentry can be unlinked
> - * @dentry: dentry to be tested
> - *
> - * Returns 0 if @dentry is a non-empty directory; otherwise returns 1.
> - */
> -int simple_offset_empty(struct dentry *dentry)
> -{
> -	struct inode *inode = d_inode(dentry);
> -	struct offset_ctx *octx;
> -	struct dentry *child;
> -	unsigned long index;
> -	int ret = 1;
> -
> -	if (!inode || !S_ISDIR(inode->i_mode))
> -		return ret;
> -
> -	index = DIR_OFFSET_MIN;
> -	octx = inode->i_op->get_offset_ctx(inode);
> -	mt_for_each(&octx->mt, child, index, LONG_MAX) {
> -		spin_lock(&child->d_lock);
> -		if (simple_positive(child)) {
> -			spin_unlock(&child->d_lock);
> -			ret = 0;
> -			break;
> -		}
> -		spin_unlock(&child->d_lock);
> -	}
> -
> -	return ret;
> -}
> -
>   /**
>    * simple_offset_rename - handle directory offsets for rename
>    * @old_dir: parent directory of source entry
> diff --git a/include/linux/fs.h b/include/linux/fs.h
> index 7e29433c5ecc..f7efc6866ebc 100644
> --- a/include/linux/fs.h
> +++ b/include/linux/fs.h
> @@ -3468,7 +3468,6 @@ struct offset_ctx {
>   void simple_offset_init(struct offset_ctx *octx);
>   int simple_offset_add(struct offset_ctx *octx, struct dentry *dentry);
>   void simple_offset_remove(struct offset_ctx *octx, struct dentry *dentry);
> -int simple_offset_empty(struct dentry *dentry);
>   int simple_offset_rename(struct inode *old_dir, struct dentry *old_dentry,
>   			 struct inode *new_dir, struct dentry *new_dentry);
>   int simple_offset_rename_exchange(struct inode *old_dir,
> diff --git a/mm/shmem.c b/mm/shmem.c
> index ccb9629a0f70..274c2666f457 100644
> --- a/mm/shmem.c
> +++ b/mm/shmem.c
> @@ -3818,7 +3818,7 @@ static int shmem_unlink(struct inode *dir, struct dentry *dentry)
>   
>   static int shmem_rmdir(struct inode *dir, struct dentry *dentry)
>   {
> -	if (!simple_offset_empty(dentry))
> +	if (!simple_empty(dentry))
>   		return -ENOTEMPTY;
>   
>   	drop_nlink(d_inode(dentry));
> @@ -3875,7 +3875,7 @@ static int shmem_rename2(struct mnt_idmap *idmap,
>   		return simple_offset_rename_exchange(old_dir, old_dentry,
>   						     new_dir, new_dentry);
>   
> -	if (!simple_offset_empty(new_dentry))
> +	if (!simple_empty(new_dentry))
>   		return -ENOTEMPTY;
>   
>   	if (flags & RENAME_WHITEOUT) {



  reply	other threads:[~2024-12-23 14:17 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-20 15:33 [PATCH v6 0/5] Improve simple directory offset wrap behavior cel
2024-12-20 15:33 ` [PATCH v6 1/5] libfs: Return ENOSPC when the directory offset range is exhausted cel
2024-12-23 16:28   ` Liam R. Howlett
2024-12-23 17:54     ` Chuck Lever
2024-12-20 15:33 ` [PATCH v6 2/5] Revert "libfs: Add simple_offset_empty()" cel
2024-12-23 14:17   ` yangerkun [this message]
2024-12-20 15:33 ` [PATCH v6 3/5] Revert "libfs: fix infinite directory reads for offset dir" cel
2024-12-23 14:17   ` yangerkun
2024-12-20 15:33 ` [PATCH v6 4/5] libfs: Replace simple_offset end-of-directory detection cel
2024-12-23 14:17   ` yangerkun
2024-12-23 16:30   ` Liam R. Howlett
2024-12-23 17:57     ` Chuck Lever
2025-01-04 11:29     ` Christian Brauner
2024-12-20 15:33 ` [PATCH v6 5/5] libfs: Use d_children list to iterate simple_offset directories cel
2024-12-23 14:21   ` yangerkun
2024-12-23 14:44     ` Chuck Lever
2024-12-24  4:40       ` yangerkun
2024-12-24 13:52         ` Chuck Lever
2024-12-24 13:57           ` yangerkun
2024-12-24 14:00             ` yangerkun
2024-12-24 16:10               ` Chuck Lever
2024-12-22 10:44 ` [PATCH v6 0/5] Improve simple directory offset wrap behavior Christian Brauner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=f072048e-fec4-22bb-76ff-dbafe3a7fa78@huaweicloud.com \
    --to=yangerkun@huaweicloud.com \
    --cc=brauner@kernel.org \
    --cc=cel@kernel.org \
    --cc=chuck.lever@oracle.com \
    --cc=hughd@google.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=viro@zeniv.linux.org.uk \
    --cc=yukuai3@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox