From: "Christian König" <christian.koenig@amd.com>
To: Mika Kuoppala <mika.kuoppala@linux.intel.com>,
intel-xe@lists.freedesktop.org,
lkml <linux-kernel@vger.kernel.org>,
Linux MM <linux-mm@kvack.org>
Cc: dri-devel@lists.freedesktop.org,
Andrzej Hajda <andrzej.hajda@intel.com>,
Maciej Patelczyk <maciej.patelczyk@intel.com>,
Jonathan Cavitt <jonathan.cavitt@intel.com>
Subject: Re: [PATCH 14/26] drm/xe/eudebug: implement userptr_vma access
Date: Mon, 9 Dec 2024 15:03:04 +0100 [thread overview]
Message-ID: <ec42fe8b-9be0-41cc-96f4-f1869c6bb7e6@amd.com> (raw)
In-Reply-To: <20241209133318.1806472-15-mika.kuoppala@linux.intel.com>
Am 09.12.24 um 14:33 schrieb Mika Kuoppala:
> From: Andrzej Hajda <andrzej.hajda@intel.com>
>
> Debugger needs to read/write program's vmas including userptr_vma.
> Since hmm_range_fault is used to pin userptr vmas, it is possible
> to map those vmas from debugger context.
Oh, this implementation is extremely questionable as well. Adding the
LKML and the MM list as well.
First of all hmm_range_fault() does *not* pin anything!
In other words you don't have a page reference when the function
returns, but rather just a sequence number you can check for modifications.
> v2: pin pages vs notifier, move to vm.c (Matthew)
> v3: - iterate over system pages instead of DMA, fixes iommu enabled
> - s/xe_uvma_access/xe_vm_uvma_access/ (Matt)
>
> Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
> Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
> Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com> #v1
> ---
> drivers/gpu/drm/xe/xe_eudebug.c | 3 ++-
> drivers/gpu/drm/xe/xe_vm.c | 47 +++++++++++++++++++++++++++++++++
> drivers/gpu/drm/xe/xe_vm.h | 3 +++
> 3 files changed, 52 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/xe/xe_eudebug.c b/drivers/gpu/drm/xe/xe_eudebug.c
> index 9d87df75348b..e5949e4dcad8 100644
> --- a/drivers/gpu/drm/xe/xe_eudebug.c
> +++ b/drivers/gpu/drm/xe/xe_eudebug.c
> @@ -3076,7 +3076,8 @@ static int xe_eudebug_vma_access(struct xe_vma *vma, u64 offset_in_vma,
> return ret;
> }
>
> - return -EINVAL;
> + return xe_vm_userptr_access(to_userptr_vma(vma), offset_in_vma,
> + buf, bytes, write);
> }
>
> static int xe_eudebug_vm_access(struct xe_vm *vm, u64 offset,
> diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c
> index 0f17bc8b627b..224ff9e16941 100644
> --- a/drivers/gpu/drm/xe/xe_vm.c
> +++ b/drivers/gpu/drm/xe/xe_vm.c
> @@ -3414,3 +3414,50 @@ void xe_vm_snapshot_free(struct xe_vm_snapshot *snap)
> }
> kvfree(snap);
> }
> +
> +int xe_vm_userptr_access(struct xe_userptr_vma *uvma, u64 offset,
> + void *buf, u64 len, bool write)
> +{
> + struct xe_vm *vm = xe_vma_vm(&uvma->vma);
> + struct xe_userptr *up = &uvma->userptr;
> + struct xe_res_cursor cur = {};
> + int cur_len, ret = 0;
> +
> + while (true) {
> + down_read(&vm->userptr.notifier_lock);
> + if (!xe_vma_userptr_check_repin(uvma))
> + break;
> +
> + spin_lock(&vm->userptr.invalidated_lock);
> + list_del_init(&uvma->userptr.invalidate_link);
> + spin_unlock(&vm->userptr.invalidated_lock);
> +
> + up_read(&vm->userptr.notifier_lock);
> + ret = xe_vma_userptr_pin_pages(uvma);
> + if (ret)
> + return ret;
> + }
> +
> + if (!up->sg) {
> + ret = -EINVAL;
> + goto out_unlock_notifier;
> + }
> +
> + for (xe_res_first_sg_system(up->sg, offset, len, &cur); cur.remaining;
> + xe_res_next(&cur, cur_len)) {
> + void *ptr = kmap_local_page(sg_page(cur.sgl)) + cur.start;
The interface basically creates a side channel to access userptrs in the
way an userspace application would do without actually going through
userspace.
That is generally not something a device driver should ever do as far as
I can see.
> +
> + cur_len = min(cur.size, cur.remaining);
> + if (write)
> + memcpy(ptr, buf, cur_len);
> + else
> + memcpy(buf, ptr, cur_len);
> + kunmap_local(ptr);
> + buf += cur_len;
> + }
> + ret = len;
> +
> +out_unlock_notifier:
> + up_read(&vm->userptr.notifier_lock);
I just strongly hope that this will prevent the mapping from changing.
Regards,
Christian.
> + return ret;
> +}
> diff --git a/drivers/gpu/drm/xe/xe_vm.h b/drivers/gpu/drm/xe/xe_vm.h
> index 23adb7442881..372ad40ad67f 100644
> --- a/drivers/gpu/drm/xe/xe_vm.h
> +++ b/drivers/gpu/drm/xe/xe_vm.h
> @@ -280,3 +280,6 @@ struct xe_vm_snapshot *xe_vm_snapshot_capture(struct xe_vm *vm);
> void xe_vm_snapshot_capture_delayed(struct xe_vm_snapshot *snap);
> void xe_vm_snapshot_print(struct xe_vm_snapshot *snap, struct drm_printer *p);
> void xe_vm_snapshot_free(struct xe_vm_snapshot *snap);
> +
> +int xe_vm_userptr_access(struct xe_userptr_vma *uvma, u64 offset,
> + void *buf, u64 len, bool write);
next parent reply other threads:[~2024-12-09 14:03 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20241209133318.1806472-1-mika.kuoppala@linux.intel.com>
[not found] ` <20241209133318.1806472-15-mika.kuoppala@linux.intel.com>
2024-12-09 14:03 ` Christian König [this message]
2024-12-09 14:56 ` Joonas Lahtinen
2024-12-09 15:31 ` Simona Vetter
2024-12-09 15:42 ` Christian König
2024-12-09 15:45 ` Christian König
2024-12-10 9:33 ` Joonas Lahtinen
2024-12-10 10:00 ` Christian König
2024-12-10 11:57 ` Joonas Lahtinen
2024-12-10 14:03 ` Christian König
2024-12-11 12:59 ` Joonas Lahtinen
2024-12-17 14:12 ` Joonas Lahtinen
2024-12-20 12:47 ` Mika Kuoppala
2024-12-10 11:17 ` Simona Vetter
2024-12-12 8:49 ` Thomas Hellström
2024-12-12 10:12 ` Simona Vetter
2024-12-13 19:39 ` Matthew Brost
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ec42fe8b-9be0-41cc-96f4-f1869c6bb7e6@amd.com \
--to=christian.koenig@amd.com \
--cc=andrzej.hajda@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jonathan.cavitt@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=maciej.patelczyk@intel.com \
--cc=mika.kuoppala@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox