From: "David Hildenbrand (Arm)" <david@kernel.org>
To: Mike Rapoport <rppt@kernel.org>
Cc: Yuan Liu <yuan1.liu@intel.com>,
Oscar Salvador <osalvador@suse.de>,
Wei Yang <richard.weiyang@gmail.com>,
linux-mm@kvack.org, Yong Hu <yong.hu@intel.com>,
Nanhai Zou <nanhai.zou@intel.com>,
Tim Chen <tim.c.chen@linux.intel.com>,
Qiuxu Zhuo <qiuxu.zhuo@intel.com>,
Yu C Chen <yu.c.chen@intel.com>, Pan Deng <pan.deng@intel.com>,
Tianyou Li <tianyou.li@intel.com>,
Chen Zhang <zhangchen.kidd@jd.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] mm/memory hotplug/unplug: Optimize zone contiguous check when changing pfn range
Date: Thu, 9 Apr 2026 17:08:18 +0200 [thread overview]
Message-ID: <e86fee84-08d8-4563-8596-e40d8e196799@kernel.org> (raw)
In-Reply-To: <ade6RVeXxDt7ImP4@kernel.org>
On 4/9/26 16:40, Mike Rapoport wrote:
> On Wed, Apr 08, 2026 at 09:36:14AM +0200, David Hildenbrand (Arm) wrote:
>> On 4/8/26 05:16, Yuan Liu wrote:
>>> When move_pfn_range_to_zone() or remove_pfn_range_from_zone() updates a
>>> zone, set_zone_contiguous() rescans the entire zone pageblock-by-pageblock
>>> to rebuild zone->contiguous. For large zones this is a significant cost
>>> during memory hotplug and hot-unplug.
>>>
>>> Add a new zone member pages_with_online_memmap that tracks the number of
>>> pages within the zone span that have an online memory map (including present
>>> pages and memory holes whose memory map has been initialized). When
>>> spanned_pages == pages_with_online_memmap the zone is contiguous and
>>> pfn_to_page() can be called on any PFN in the zone span without further
>>> pfn_valid() checks.
>>>
>>> Only pages that fall within the current zone span are accounted towards
>>> pages_with_online_memmap. A "too small" value is safe, it merely prevents
>>> detecting a contiguous zone.
>>>
>>> The following test cases of memory hotplug for a VM [1], tested in the
>>> environment [2], show that this optimization can significantly reduce the
>>> memory hotplug time [3].
>>>
>>> +----------------+------+---------------+--------------+----------------+
>>> | | Size | Time (before) | Time (after) | Time Reduction |
>>> | +------+---------------+--------------+----------------+
>>> | Plug Memory | 256G | 10s | 3s | 70% |
>>> | +------+---------------+--------------+----------------+
>>> | | 512G | 36s | 7s | 81% |
>>> +----------------+------+---------------+--------------+----------------+
>>>
>>> +----------------+------+---------------+--------------+----------------+
>>> | | Size | Time (before) | Time (after) | Time Reduction |
>>> | +------+---------------+--------------+----------------+
>>> | Unplug Memory | 256G | 11s | 4s | 64% |
>>> | +------+---------------+--------------+----------------+
>>> | | 512G | 36s | 9s | 75% |
>>> +----------------+------+---------------+--------------+----------------+
>>>
>>> [1] Qemu commands to hotplug 256G/512G memory for a VM:
>>> object_add memory-backend-ram,id=hotmem0,size=256G/512G,share=on
>>> device_add virtio-mem-pci,id=vmem1,memdev=hotmem0,bus=port1
>>> qom-set vmem1 requested-size 256G/512G (Plug Memory)
>>> qom-set vmem1 requested-size 0G (Unplug Memory)
>>>
>>> [2] Hardware : Intel Icelake server
>>> Guest Kernel : v7.0-rc4
>>> Qemu : v9.0.0
>>>
>>> Launch VM :
>>> qemu-system-x86_64 -accel kvm -cpu host \
>>> -drive file=./Centos10_cloud.qcow2,format=qcow2,if=virtio \
>>> -drive file=./seed.img,format=raw,if=virtio \
>>> -smp 3,cores=3,threads=1,sockets=1,maxcpus=3 \
>>> -m 2G,slots=10,maxmem=2052472M \
>>> -device pcie-root-port,id=port1,bus=pcie.0,slot=1,multifunction=on \
>>> -device pcie-root-port,id=port2,bus=pcie.0,slot=2 \
>>> -nographic -machine q35 \
>>> -nic user,hostfwd=tcp::3000-:22
>>>
>>> Guest kernel auto-onlines newly added memory blocks:
>>> echo online > /sys/devices/system/memory/auto_online_blocks
>>>
>>> [3] The time from typing the QEMU commands in [1] to when the output of
>>> 'grep MemTotal /proc/meminfo' on Guest reflects that all hotplugged
>>> memory is recognized.
>>>
>>> Reported-by: Nanhai Zou <nanhai.zou@intel.com>
>>> Reported-by: Chen Zhang <zhangchen.kidd@jd.com>
>>> Tested-by: Yuan Liu <yuan1.liu@intel.com>
>>> Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>
>>> Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
>>> Reviewed-by: Yu C Chen <yu.c.chen@intel.com>
>>> Reviewed-by: Pan Deng <pan.deng@intel.com>
>>> Reviewed-by: Nanhai Zou <nanhai.zou@intel.com>
>>> Co-developed-by: Tianyou Li <tianyou.li@intel.com>
>>> Signed-off-by: Tianyou Li <tianyou.li@intel.com>
>>> Signed-off-by: Yuan Liu <yuan1.liu@intel.com>
>>> Acked-by: David Hildenbrand (Arm) <david@kernel.org>
>>> ---
>>
>> [...]
>>
>>> @@ -842,7 +842,7 @@ overlap_memmap_init(unsigned long zone, unsigned long *pfn)
>>> * zone/node above the hole except for the trailing pages in the last
>>> * section that will be appended to the zone/node below.
>>> */
>>> -static void __init init_unavailable_range(unsigned long spfn,
>>> +static unsigned long __init init_unavailable_range(unsigned long spfn,
>>> unsigned long epfn,
>>> int zone, int node)
>>> {
>>> @@ -858,6 +858,7 @@ static void __init init_unavailable_range(unsigned long spfn,
>>> if (pgcnt)
>>> pr_info("On node %d, zone %s: %lld pages in unavailable ranges\n",
>>> node, zone_names[zone], pgcnt);
>>> + return pgcnt;
>>> }
>>>
>>> /*
>>> @@ -956,9 +957,22 @@ static void __init memmap_init_zone_range(struct zone *zone,
>>> memmap_init_range(end_pfn - start_pfn, nid, zone_id, start_pfn,
>>> zone_end_pfn, MEMINIT_EARLY, NULL, MIGRATE_MOVABLE,
>>> false);
>>> + zone->pages_with_online_memmap += end_pfn - start_pfn;
>>>
>>> - if (*hole_pfn < start_pfn)
>>> - init_unavailable_range(*hole_pfn, start_pfn, zone_id, nid);
>>> + if (*hole_pfn < start_pfn) {
>>> + unsigned long pgcnt;
>>> +
>>> + if (*hole_pfn < zone_start_pfn) {
>>> + init_unavailable_range(*hole_pfn, zone_start_pfn,
>>> + zone_id, nid);
>>> + pgcnt = init_unavailable_range(zone_start_pfn,
>>> + start_pfn, zone_id, nid);
>>
>> Indentation of parameters.
>>
>>> + } else {
>>> + pgcnt = init_unavailable_range(*hole_pfn, start_pfn,
>>> + zone_id, nid);
>>
>>
>> Same here.
>>
>>> + }
>>> + zone->pages_with_online_memmap += pgcnt;
>>> + }
>>
>>
>> Maybe something like the following could make it nicer to read, just a
>> thought.
>>
>>
>> unsigned long hole_start_pfn = *hole_pfn;
>>
>> if (hole_start_pfn < zone_start_pfn) {
>> init_unavailable_range(hole_start_pfn, zone_start_pfn,
>> zone_id, nid);
>> hole_start_pfn = zone_start_pfn;
>> }
>> pgcnt = init_unavailable_range(hole_start_pfn, start_pfn,
>> zone_id, nid);
>>
>
> Yeah, this looks better :)
>
> sashiko had several comments
> https://sashiko.dev/#/patchset/20260408031615.1831922-1-yuan1.liu%40intel.com
>
> I skipped the ones related to hotplug, but in the mm_init part the comment
> about zones that can have overlapping physical spans when mirrored
> kernelcore is enabled seems valid.
The set_zone_contiguous/clear_zone_contiguous can be ignored I think.
The comment about shrink_zone_span() is likely not realistic.
shrink_zone_span() would not shrink over boot holes.
Well, unless we have an odd case where the hole+memory starts in the
middle of a "PAGES_PER_SUBSECTION". That would already be problematic if
memory starts/ends in the middle of a PAGES_PER_SUBSECTION chunk. I
don't such a case exists.
We could improve shrink_zone_span() to let
find_smallest_section_pfn/find_biggest_section_pfn test the pfn_to_nid()
and page_zone() not on;y on the smallest/highest pfn, but also on the
highest/smallest PFN in a PAGES_PER_SUBSECTION chunk.
No need to test pfn_to_online_page() twice, as that is the same result
for all pages in a PAGES_PER_SUBSECTION chunk.
--
Cheers,
David
prev parent reply other threads:[~2026-04-09 15:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-08 3:16 Yuan Liu
2026-04-08 7:36 ` David Hildenbrand (Arm)
2026-04-08 12:29 ` Liu, Yuan1
2026-04-08 12:31 ` David Hildenbrand (Arm)
2026-04-08 12:37 ` Liu, Yuan1
2026-04-09 14:40 ` Mike Rapoport
2026-04-09 15:08 ` David Hildenbrand (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e86fee84-08d8-4563-8596-e40d8e196799@kernel.org \
--to=david@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nanhai.zou@intel.com \
--cc=osalvador@suse.de \
--cc=pan.deng@intel.com \
--cc=qiuxu.zhuo@intel.com \
--cc=richard.weiyang@gmail.com \
--cc=rppt@kernel.org \
--cc=tianyou.li@intel.com \
--cc=tim.c.chen@linux.intel.com \
--cc=yong.hu@intel.com \
--cc=yu.c.chen@intel.com \
--cc=yuan1.liu@intel.com \
--cc=zhangchen.kidd@jd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox