Re: [PATCH v1] mm: zswap: add per-memcg stat for incompressible pages

["Jiayuan Chen" <jiayuan.chen@linux.dev>]

February 6, 2026 at 10:21, "SeongJae Park" <sj@kernel.org mailto:sj@kernel.org?to=%22SeongJae%20Park%22%20%3Csj%40kernel.org%3E > wrote:


> 
> On Thu, 5 Feb 2026 13:30:12 +0800 Jiayuan Chen <jiayuan.chen@linux.dev> wrote:
> 
> > 
> > From: Jiayuan Chen <jiayuan.chen@shopee.com>
> >  
> >  The global zswap_stored_incompressible_pages counter was added in commit
> >  dca4437a5861 ("mm/zswap: store <PAGE_SIZE compression failed page as-is")
> >  to track how many pages are stored in raw (uncompressed) form in zswap.
> >  However, in containerized environments, knowing which cgroup is
> >  contributing incompressible pages is essential for effective resource
> >  management.
> >  
> >  Add a new memcg stat 'zswpraw' to track incompressible pages per cgroup.
> >  This helps administrators and orchestrators to:
> >  
> >  1. Identify workloads that produce incompressible data (e.g., encrypted
> >  data, already-compressed media, random data) and may not benefit from
> >  zswap.
> >  
> >  2. Make informed decisions about workload placement - moving
> >  incompressible workloads to nodes with larger swap backing devices
> >  rather than relying on zswap.
> >  
> >  3. Debug zswap efficiency issues at the cgroup level without needing to
> >  correlate global stats with individual cgroups.
> >  
> >  While the compression ratio can be estimated from existing stats
> >  (zswap / zswapped * PAGE_SIZE), this doesn't distinguish between
> >  "uniformly poor compression" and "a few completely incompressible pages
> >  mixed with highly compressible ones". The zswpraw stat provides direct
> >  visibility into the latter case.
> >  
> >  Changes
> >  -------
> >  
> >  1. Add zswap_is_raw() helper (include/linux/zswap.h)
> >  - Abstract the PAGE_SIZE comparison logic for identifying raw entries
> >  - Keep the incompressible check in one place for maintainability
> >  
> >  2. Add MEMCG_ZSWAP_RAW stat definition (include/linux/memcontrol.h,
> >  mm/memcontrol.c)
> >  - Add MEMCG_ZSWAP_RAW to memcg_stat_item enum
> >  - Register in memcg_stat_items[] and memory_stats[] arrays
> >  - Export as "zswpraw" in memory.stat
> >  
> >  3. Update statistics accounting (mm/memcontrol.c, mm/zswap.c)
> >  - Track MEMCG_ZSWAP_RAW in obj_cgroup_charge/uncharge_zswap()
> >  - Use zswap_is_raw() helper in zswap.c for consistency
> >  
> >  Test
> >  ----
> >  
> >  I wrote a simple test program[1] that allocates memory and compresses it
> >  with zstd, so kernel zswap cannot compress further.
> >  
> >  $ cgcreate -g memory:test
> >  $ cgexec -g memory:test ./test_zswpraw &
> >  $ cat /sys/fs/cgroup/test/memory.stat | grep zswp
> >  zswpraw 0
> >  zswpin 0
> >  zswpout 0
> >  zswpwb 0
> >  
> >  $ echo "100M" > /sys/fs/cgroup/test/memory.reclaim
> >  $ cat /sys/fs/cgroup/test/memory.stat | grep zswp
> >  zswpraw 104800256
> >  zswpin 0
> >  zswpout 51222
> >  zswpwb 0
> >  
> >  $ pkill test_zswpraw
> >  $ cat /sys/fs/cgroup/test/memory.stat | grep zswp
> >  zswpraw 0
> >  zswpin 1
> >  zswpout 51222
> >  zswpwb 0
> >  
> >  [1] https://gist.github.com/mrpre/00432c6154250326994fbeaf62e0e6f1
> >  
> >  Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
> >  ---
> >  include/linux/memcontrol.h | 1 +
> >  include/linux/zswap.h | 9 +++++++++
> >  mm/memcontrol.c | 6 ++++++
> >  mm/zswap.c | 6 +++---
> >  4 files changed, 19 insertions(+), 3 deletions(-)
> > 
> As others also mentioned, the documentation of the new stat would be needed.
> 
> > 
> > diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> >  index b6c82c8f73e1..83d1328f81d1 100644
> >  --- a/include/linux/memcontrol.h
> >  +++ b/include/linux/memcontrol.h
> >  @@ -39,6 +39,7 @@ enum memcg_stat_item {
> >  MEMCG_KMEM,
> >  MEMCG_ZSWAP_B,
> >  MEMCG_ZSWAPPED,
> >  + MEMCG_ZSWAP_RAW,
> >  MEMCG_NR_STAT,
> >  };
> >  
> >  diff --git a/include/linux/zswap.h b/include/linux/zswap.h
> >  index 30c193a1207e..94f84b154b71 100644
> >  --- a/include/linux/zswap.h
> >  +++ b/include/linux/zswap.h
> >  @@ -7,6 +7,15 @@
> >  
> >  struct lruvec;
> >  
> >  +/*
> >  + * Check if a zswap entry is stored in raw (uncompressed) form.
> >  + * This happens when compression doesn't reduce the size.
> >  + */
> >  +static inline bool zswap_is_raw(size_t size)
> >  +{
> >  + return size == PAGE_SIZE;
> >  +}
> >  +
> > 
> No strong opinion, but I'm not really sure if the helper is needed, because it
> feels quite simple logic:
> 
>  "If an object is compressed and the size is same to the original one, the
>  object is incompressible."
> 
> I also feel the function name bit odd, given the type of the parameter. Based
> on the function name and the comment, I'd expect it to receive a zswap_entry
> object. I understand it is better to receive a size_t, to be called from
> obj_cgroup_[un]charge_zswap(), though. Even in the case, I think the name can
> be better (e.g., zswap_compression_failed() or zswap_was_incompressible() ?),
> or at least the coment can be more kindly explain the fact that the parameter
> is the size of object after the compression attempt.
> 
> > 
> > extern atomic_long_t zswap_stored_pages;
> >  
> >  #ifdef CONFIG_ZSWAP
> >  diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> >  index 007413a53b45..32fb801530a3 100644
> >  --- a/mm/memcontrol.c
> >  +++ b/mm/memcontrol.c
> >  @@ -341,6 +341,7 @@ static const unsigned int memcg_stat_items[] = {
> >  MEMCG_KMEM,
> >  MEMCG_ZSWAP_B,
> >  MEMCG_ZSWAPPED,
> >  + MEMCG_ZSWAP_RAW,
> >  };
> > 
> No strong opinion, but I think Shakeel's suggestion of other names is
> reasonable.
> 
> > 
> > #define NR_MEMCG_NODE_STAT_ITEMS ARRAY_SIZE(memcg_node_stat_items)
> >  @@ -1346,6 +1347,7 @@ static const struct memory_stat memory_stats[] = {
> >  #ifdef CONFIG_ZSWAP
> >  { "zswap", MEMCG_ZSWAP_B },
> >  { "zswapped", MEMCG_ZSWAPPED },
> >  + { "zswpraw", MEMCG_ZSWAP_RAW },
> > 
> Ditto.
> 
> > 
> > #endif
> >  { "file_mapped", NR_FILE_MAPPED },
> >  { "file_dirty", NR_FILE_DIRTY },
> >  @@ -5458,6 +5460,8 @@ void obj_cgroup_charge_zswap(struct obj_cgroup *objcg, size_t size)
> >  memcg = obj_cgroup_memcg(objcg);
> >  mod_memcg_state(memcg, MEMCG_ZSWAP_B, size);
> >  mod_memcg_state(memcg, MEMCG_ZSWAPPED, 1);
> >  + if (zswap_is_raw(size))
> >  + mod_memcg_state(memcg, MEMCG_ZSWAP_RAW, 1);
> > 
> I understand the helper function is better to receive size_t rather than
> zswap_entry for this.
> 
> > 
> > rcu_read_unlock();
> >  }
> >  
> >  @@ -5481,6 +5485,8 @@ void obj_cgroup_uncharge_zswap(struct obj_cgroup *objcg, size_t size)
> >  memcg = obj_cgroup_memcg(objcg);
> >  mod_memcg_state(memcg, MEMCG_ZSWAP_B, -size);
> >  mod_memcg_state(memcg, MEMCG_ZSWAPPED, -1);
> >  + if (zswap_is_raw(size))
> >  + mod_memcg_state(memcg, MEMCG_ZSWAP_RAW, -1);
> >  rcu_read_unlock();
> >  }
> >  
> >  diff --git a/mm/zswap.c b/mm/zswap.c
> >  index 3d2d59ac3f9c..54ab4d126f64 100644
> >  --- a/mm/zswap.c
> >  +++ b/mm/zswap.c
> >  @@ -723,7 +723,7 @@ static void zswap_entry_free(struct zswap_entry *entry)
> >  obj_cgroup_uncharge_zswap(entry->objcg, entry->length);
> >  obj_cgroup_put(entry->objcg);
> >  }
> >  - if (entry->length == PAGE_SIZE)
> >  + if (zswap_is_raw(entry->length))
> >  atomic_long_dec(&zswap_stored_incompressible_pages);
> >  zswap_entry_cache_free(entry);
> >  atomic_long_dec(&zswap_stored_pages);
> >  @@ -941,7 +941,7 @@ static bool zswap_decompress(struct zswap_entry *entry, struct folio *folio)
> >  zs_obj_read_sg_begin(pool->zs_pool, entry->handle, input, entry->length);
> >  
> >  /* zswap entries of length PAGE_SIZE are not compressed. */
> >  - if (entry->length == PAGE_SIZE) {
> >  + if (zswap_is_raw(entry->length)) {
> >  WARN_ON_ONCE(input->length != PAGE_SIZE);
> >  memcpy_from_sglist(kmap_local_folio(folio, 0), input, 0, PAGE_SIZE);
> >  dlen = PAGE_SIZE;
> > 
> Below this part, I show 'dlen == PAGE_SIZE'. Should it also be converted to
> use the helper function?
> 

The dlen variable represents the decompressed (plaintext) size.
Since we compress individual pages, the decompressed output should
always be PAGE_SIZE in normal cases.

This check validates whether decompression produced the expected result, not whether the entry is incompressible.

Using zswap_is_incomp() here would be semantically incorrect - the helper is meant to check if an
entry was stored without compression (i.e., compression failed to reduce size), while dlen == PAGE_SIZE
verifies the output of decompression is valid.