From: Vladimir Davydov <vdavydov@virtuozzo.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Michal Hocko <mhocko@kernel.org>,
linux-mm@kvack.org, cgroups@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/7] mm: vmscan: pass memcg to get_scan_count()
Date: Thu, 17 Dec 2015 15:29:55 +0300 [thread overview]
Message-ID: <daacf7e0dbe2ba11ed44facc36ac2fed3546ffe0.1450352792.git.vdavydov@virtuozzo.com> (raw)
In-Reply-To: <cover.1450352791.git.vdavydov@virtuozzo.com>
memcg will come in handy in get_scan_count(). It can already be used for
getting swappiness immediately in get_scan_count() instead of passing it
around. The following patches will add more memcg-related values, which
will be used there.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
---
mm/vmscan.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index bb01b04154ad..acc6bff84e26 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1957,10 +1957,11 @@ enum scan_balance {
* nr[0] = anon inactive pages to scan; nr[1] = anon active pages to scan
* nr[2] = file inactive pages to scan; nr[3] = file active pages to scan
*/
-static void get_scan_count(struct lruvec *lruvec, int swappiness,
+static void get_scan_count(struct lruvec *lruvec, struct mem_cgroup *memcg,
struct scan_control *sc, unsigned long *nr,
unsigned long *lru_pages)
{
+ int swappiness = mem_cgroup_swappiness(memcg);
struct zone_reclaim_stat *reclaim_stat = &lruvec->reclaim_stat;
u64 fraction[2];
u64 denominator = 0; /* gcc */
@@ -2184,9 +2185,10 @@ static inline void init_tlb_ubc(void)
/*
* This is a basic per-zone page freer. Used by both kswapd and direct reclaim.
*/
-static void shrink_lruvec(struct lruvec *lruvec, int swappiness,
- struct scan_control *sc, unsigned long *lru_pages)
+static void shrink_zone_memcg(struct zone *zone, struct mem_cgroup *memcg,
+ struct scan_control *sc, unsigned long *lru_pages)
{
+ struct lruvec *lruvec = mem_cgroup_zone_lruvec(zone, memcg);
unsigned long nr[NR_LRU_LISTS];
unsigned long targets[NR_LRU_LISTS];
unsigned long nr_to_scan;
@@ -2196,7 +2198,7 @@ static void shrink_lruvec(struct lruvec *lruvec, int swappiness,
struct blk_plug plug;
bool scan_adjusted;
- get_scan_count(lruvec, swappiness, sc, nr, lru_pages);
+ get_scan_count(lruvec, memcg, sc, nr, lru_pages);
/* Record the original scan target for proportional adjustments later */
memcpy(targets, nr, sizeof(nr));
@@ -2400,8 +2402,6 @@ static bool shrink_zone(struct zone *zone, struct scan_control *sc,
unsigned long lru_pages;
unsigned long reclaimed;
unsigned long scanned;
- struct lruvec *lruvec;
- int swappiness;
if (mem_cgroup_low(root, memcg)) {
if (!sc->may_thrash)
@@ -2409,12 +2409,10 @@ static bool shrink_zone(struct zone *zone, struct scan_control *sc,
mem_cgroup_events(memcg, MEMCG_LOW, 1);
}
- lruvec = mem_cgroup_zone_lruvec(zone, memcg);
- swappiness = mem_cgroup_swappiness(memcg);
reclaimed = sc->nr_reclaimed;
scanned = sc->nr_scanned;
- shrink_lruvec(lruvec, swappiness, sc, &lru_pages);
+ shrink_zone_memcg(zone, memcg, sc, &lru_pages);
zone_lru_pages += lru_pages;
if (memcg && is_classzone)
@@ -2884,8 +2882,6 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *memcg,
.may_unmap = 1,
.may_swap = !noswap,
};
- struct lruvec *lruvec = mem_cgroup_zone_lruvec(zone, memcg);
- int swappiness = mem_cgroup_swappiness(memcg);
unsigned long lru_pages;
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
@@ -2902,7 +2898,7 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *memcg,
* will pick up pages from other mem cgroup's as well. We hack
* the priority and make it zero.
*/
- shrink_lruvec(lruvec, swappiness, &sc, &lru_pages);
+ shrink_zone_memcg(zone, memcg, &sc, &lru_pages);
trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
--
2.1.4
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-12-17 12:30 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-17 12:29 [PATCH v2 0/7] Add swap accounting to cgroup2 Vladimir Davydov
2015-12-17 12:29 ` [PATCH v2 1/7] mm: memcontrol: charge swap " Vladimir Davydov
2015-12-17 16:09 ` Johannes Weiner
2016-01-13 16:44 ` Michal Hocko
2015-12-17 12:29 ` Vladimir Davydov [this message]
2016-01-13 16:47 ` [PATCH v2 2/7] mm: vmscan: pass memcg to get_scan_count() Michal Hocko
2015-12-17 12:29 ` [PATCH v2 3/7] mm: memcontrol: replace mem_cgroup_lruvec_online with mem_cgroup_online Vladimir Davydov
2016-01-13 16:47 ` Michal Hocko
2015-12-17 12:29 ` [PATCH v2 4/7] swap.h: move memcg related stuff to the end of the file Vladimir Davydov
2016-01-13 16:48 ` Michal Hocko
2015-12-17 12:29 ` [PATCH v2 5/7] mm: vmscan: do not scan anon pages if memcg swap limit is hit Vladimir Davydov
2016-01-13 16:54 ` Michal Hocko
2015-12-17 12:29 ` [PATCH v2 6/7] mm: free swap cache aggressively if memcg swap is full Vladimir Davydov
2016-01-13 16:59 ` Michal Hocko
2015-12-17 12:30 ` [PATCH v2 7/7] Documentation: cgroup: add memory.swap.{current,max} description Vladimir Davydov
2015-12-17 16:16 ` Johannes Weiner
2015-12-18 2:51 ` Kamezawa Hiroyuki
2015-12-18 15:39 ` Vladimir Davydov
2016-01-13 17:02 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=daacf7e0dbe2ba11ed44facc36ac2fed3546ffe0.1450352792.git.vdavydov@virtuozzo.com \
--to=vdavydov@virtuozzo.com \
--cc=akpm@linux-foundation.org \
--cc=cgroups@vger.kernel.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox