* [PATCH 0/1] mm/fake-numa: allow later numa node hotplug @ 2025-01-06 12:06 Bruno Faccini 2025-01-06 12:06 ` [PATCH 1/1] " Bruno Faccini 2025-01-07 10:08 ` [PATCH 0/1] " David Hildenbrand 0 siblings, 2 replies; 15+ messages in thread From: Bruno Faccini @ 2025-01-06 12:06 UTC (permalink / raw) To: linux-kernel Cc: linux-mm, akpm, rppt, david, ziy, jhubbard, mrusiniak, Bruno Faccini When trying to use fake-numa feature on our system where new Numa nodes are being "hot-plugged" upon driver load, this fails with the following type of message and warning with stack : node 8 was absent from the node_possible_map WARNING: CPU: 61 PID: 4259 at mm/memory_hotplug.c:1506 add_memory_resource+0x3dc/0x418 This issue prevents the use of the fake-NUMA debug feature with the system's full configuration, when it has proven to be sometimes extremely useful for performance testing of multi-tasked, memory-bound applications, as it enables better isolation of processes/ranks compared to fat NUMA nodes. Usual numactl output after driver has “hot-plugged”/unveiled some new Numa nodes with and without memory : $ numactl --hardware available: 9 nodes (0-8) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 0 size: 490037 MB node 0 free: 484432 MB node 1 cpus: node 1 size: 97280 MB node 1 free: 97279 MB node 2 cpus: node 2 size: 0 MB node 2 free: 0 MB node 3 cpus: node 3 size: 0 MB node 3 free: 0 MB node 4 cpus: node 4 size: 0 MB node 4 free: 0 MB node 5 cpus: node 5 size: 0 MB node 5 free: 0 MB node 6 cpus: node 6 size: 0 MB node 6 free: 0 MB node 7 cpus: node 7 size: 0 MB node 7 free: 0 MB node 8 cpus: node 8 size: 0 MB node 8 free: 0 MB node distances: node 0 1 2 3 4 5 6 7 8 0: 10 80 80 80 80 80 80 80 80 1: 80 10 255 255 255 255 255 255 255 2: 80 255 10 255 255 255 255 255 255 3: 80 255 255 10 255 255 255 255 255 4: 80 255 255 255 10 255 255 255 255 5: 80 255 255 255 255 10 255 255 255 6: 80 255 255 255 255 255 10 255 255 7: 80 255 255 255 255 255 255 10 255 8: 80 255 255 255 255 255 255 255 10 With recent M.Rapoport set of fake-numa patches in mm-everything and using numa=fake=4 boot parameter : $ numactl --hardware available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 0 size: 122518 MB node 0 free: 117141 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 1 size: 219911 MB node 1 free: 219751 MB node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 2 size: 122599 MB node 2 free: 122541 MB node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 3 size: 122479 MB node 3 free: 122408 MB node distances: node 0 1 2 3 0: 10 10 10 10 1: 10 10 10 10 2: 10 10 10 10 3: 10 10 10 10 With recent M.Rapoport set of fake-numa patches in mm-everything, this patch on top, using numa=fake=4 boot parameter : # numactl —hardware available: 12 nodes (0-11) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 0 size: 122518 MB node 0 free: 116429 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 1 size: 122631 MB node 1 free: 122576 MB node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 2 size: 122599 MB node 2 free: 122544 MB node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 node 3 size: 122479 MB node 3 free: 122419 MB node 4 cpus: node 4 size: 97280 MB node 4 free: 97279 MB node 5 cpus: node 5 size: 0 MB node 5 free: 0 MB node 6 cpus: node 6 size: 0 MB node 6 free: 0 MB node 7 cpus: node 7 size: 0 MB node 7 free: 0 MB node 8 cpus: node 8 size: 0 MB node 8 free: 0 MB node 9 cpus: node 9 size: 0 MB node 9 free: 0 MB node 10 cpus: node 10 size: 0 MB node 10 free: 0 MB node 11 cpus: node 11 size: 0 MB node 11 free: 0 MB node distances: node 0 1 2 3 4 5 6 7 8 9 10 11 0: 10 10 10 10 80 80 80 80 80 80 80 80 1: 10 10 10 10 80 80 80 80 80 80 80 80 2: 10 10 10 10 80 80 80 80 80 80 80 80 3: 10 10 10 10 80 80 80 80 80 80 80 80 4: 80 80 80 80 10 255 255 255 255 255 255 255 5: 80 80 80 80 255 10 255 255 255 255 255 255 6: 80 80 80 80 255 255 10 255 255 255 255 255 7: 80 80 80 80 255 255 255 10 255 255 255 255 8: 80 80 80 80 255 255 255 255 10 255 255 255 9: 80 80 80 80 255 255 255 255 255 10 255 255 10: 80 80 80 80 255 255 255 255 255 255 10 255 11: 80 80 80 80 255 255 255 255 255 255 255 10 Bruno Faccini (1): mm/fake-numa: allow later numa node hotplug drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ include/acpi/acpi_numa.h | 5 +++ include/linux/numa_memblks.h | 3 ++ mm/numa_emulation.c | 45 ++++++++++++++++--- mm/numa_memblks.c | 2 +- 5 files changed, 133 insertions(+), 8 deletions(-) base-commit: 4c10320ffbe7d6273b153b112a6e5f9b61ac008a -- 2.43.0 ^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-06 12:06 [PATCH 0/1] mm/fake-numa: allow later numa node hotplug Bruno Faccini @ 2025-01-06 12:06 ` Bruno Faccini 2025-01-14 16:05 ` David Hildenbrand 2025-01-17 5:00 ` [fake numa not working][PATCH " Hyeonggon Yoo 2025-01-07 10:08 ` [PATCH 0/1] " David Hildenbrand 1 sibling, 2 replies; 15+ messages in thread From: Bruno Faccini @ 2025-01-06 12:06 UTC (permalink / raw) To: linux-kernel Cc: linux-mm, akpm, rppt, david, ziy, jhubbard, mrusiniak, Bruno Faccini Current fake-numa implementation prevents new Numa nodes to be later hot-plugged by drivers. A common symptom of this limitation is the "node <X> was absent from the node_possible_map" message by associated warning in mm/memory_hotplug.c: add_memory_resource(). This comes from the lack of remapping in both pxm_to_node_map[] and node_to_pxm_map[] tables to take fake-numa nodes into account and thus triggers collisions with original and physical nodes only-mapping that had been determined from BIOS tables. This patch fixes this by doing the necessary node-ids translation in both pxm_to_node_map[]/node_to_pxm_map[] tables. node_distance[] table has also been fixed accordingly. Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> --- drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ include/acpi/acpi_numa.h | 5 +++ include/linux/numa_memblks.h | 3 ++ mm/numa_emulation.c | 45 ++++++++++++++++--- mm/numa_memblks.c | 2 +- 5 files changed, 133 insertions(+), 8 deletions(-) diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c index bec0dcd1f9c3..59fffe34c9d0 100644 --- a/drivers/acpi/numa/srat.c +++ b/drivers/acpi/numa/srat.c @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) } EXPORT_SYMBOL(acpi_map_pxm_to_node); +#ifdef CONFIG_NUMA_EMU +/* + * Take max_nid - 1 fake-numa nodes into account in both + * pxm_to_node_map()/node_to_pxm_map[] tables. + */ +int __init fix_pxm_node_maps(int max_nid) +{ + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; + int i, j, index = -1, count = 0; + nodemask_t nodes_to_enable; + + if (numa_off || srat_disabled()) + return -1; + + /* find fake nodes PXM mapping */ + for (i = 0; i < MAX_NUMNODES; i++) { + if (node_to_pxm_map[i] != PXM_INVAL) { + for (j = 0; j <= max_nid; j++) { + if ((emu_nid_to_phys[j] == i) && + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, + "Node %d is already binded to PXM %d\n", + j, node_to_pxm_map_copy[j])) + return -1; + if (emu_nid_to_phys[j] == i) { + node_to_pxm_map_copy[j] = + node_to_pxm_map[i]; + if (j > index) + index = j; + count++; + } + } + } + } + if (WARN(index != max_nid, "%d max nid when expected %d\n", + index, max_nid)) + return -1; + + nodes_clear(nodes_to_enable); + + /* map phys nodes not used for fake nodes */ + for (i = 0; i < MAX_NUMNODES; i++) { + if (node_to_pxm_map[i] != PXM_INVAL) { + for (j = 0; j <= max_nid; j++) + if (emu_nid_to_phys[j] == i) + break; + /* fake nodes PXM mapping has been done */ + if (j <= max_nid) + continue; + /* find first hole */ + for (j = 0; + j < MAX_NUMNODES && + node_to_pxm_map_copy[j] != PXM_INVAL; + j++) + ; + if (WARN(j == MAX_NUMNODES, + "Number of nodes exceeds MAX_NUMNODES\n")) + return -1; + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; + node_set(j, nodes_to_enable); + count++; + } + } + + /* creating reverse mapping in pxm_to_node_map[] */ + for (i = 0; i < MAX_NUMNODES; i++) + if (node_to_pxm_map_copy[i] != PXM_INVAL && + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; + + /* overwrite with new mapping */ + for (i = 0; i < MAX_NUMNODES; i++) { + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; + } + + /* enable other nodes found in PXM for hotplug */ + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); + + pr_debug("found %d total number of nodes\n", count); + return 0; +} +#endif + static void __init acpi_table_print_srat_entry(struct acpi_subtable_header *header) { diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h index b5f594754a9e..99b960bd473c 100644 --- a/include/acpi/acpi_numa.h +++ b/include/acpi/acpi_numa.h @@ -17,11 +17,16 @@ extern int node_to_pxm(int); extern int acpi_map_pxm_to_node(int); extern unsigned char acpi_srat_revision; extern void disable_srat(void); +extern int fix_pxm_node_maps(int max_nid); extern void bad_srat(void); extern int srat_disabled(void); #else /* CONFIG_ACPI_NUMA */ +static inline int fix_pxm_node_maps(int max_nid) +{ + return 0; +} static inline void disable_srat(void) { } diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h index cfad6ce7e1bd..dd85613cdd86 100644 --- a/include/linux/numa_memblks.h +++ b/include/linux/numa_memblks.h @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); int __init numa_memblks_init(int (*init_func)(void), bool memblock_force_top_down); +extern int numa_distance_cnt; + #ifdef CONFIG_NUMA_EMU +extern int emu_nid_to_phys[MAX_NUMNODES]; int numa_emu_cmdline(char *str); void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, unsigned int nr_emu_nids); diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c index 031fb9961bf7..9d55679d99ce 100644 --- a/mm/numa_emulation.c +++ b/mm/numa_emulation.c @@ -8,11 +8,12 @@ #include <linux/memblock.h> #include <linux/numa_memblks.h> #include <asm/numa.h> +#include <acpi/acpi_numa.h> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) -static int emu_nid_to_phys[MAX_NUMNODES]; +int emu_nid_to_phys[MAX_NUMNODES]; static char *emu_cmdline __initdata; int __init numa_emu_cmdline(char *str) @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); int max_emu_nid, dfl_phys_nid; int i, j, ret; + nodemask_t physnode_mask = numa_nodes_parsed; if (!emu_cmdline) goto no_emu; @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) * split the system RAM into N fake nodes. */ if (strchr(emu_cmdline, 'U')) { - nodemask_t physnode_mask = numa_nodes_parsed; unsigned long n; int nid = 0; @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) */ max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); - /* commit */ - *numa_meminfo = ei; - /* Make sure numa_nodes_parsed only contains emulated nodes */ nodes_clear(numa_nodes_parsed); for (i = 0; i < ARRAY_SIZE(ei.blk); i++) @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) ei.blk[i].nid != NUMA_NO_NODE) node_set(ei.blk[i].nid, numa_nodes_parsed); - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision + * with faked numa nodes, particularly during later memory hotplug + * handling, and also update numa_nodes_parsed accordingly. + */ + ret = fix_pxm_node_maps(max_emu_nid); + if (ret < 0) + goto no_emu; + + /* commit */ + *numa_meminfo = ei; + + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); /* make sure all emulated nodes are mapped to a physical node */ - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) + for (i = 0; i < max_emu_nid + 1; i++) if (emu_nid_to_phys[i] == NUMA_NO_NODE) emu_nid_to_phys[i] = dfl_phys_nid; @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) numa_set_distance(i, j, dist); } } + for (i = 0; i < numa_distance_cnt; i++) { + for (j = 0; j < numa_distance_cnt; j++) { + int physi, physj; + u8 dist; + + /* distance between fake nodes is already ok */ + if (emu_nid_to_phys[i] != NUMA_NO_NODE && + emu_nid_to_phys[j] != NUMA_NO_NODE) + continue; + if (emu_nid_to_phys[i] != NUMA_NO_NODE) + physi = emu_nid_to_phys[i]; + else + physi = i - max_emu_nid; + if (emu_nid_to_phys[j] != NUMA_NO_NODE) + physj = emu_nid_to_phys[j]; + else + physj = j - max_emu_nid; + dist = phys_dist[physi * numa_dist_cnt + physj]; + numa_set_distance(i, j, dist); + } + } /* free the copied physical distance table */ memblock_free(phys_dist, phys_size); return; no_emu: + numa_nodes_parsed = physnode_mask; /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) emu_nid_to_phys[i] = i; diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c index a3877e9bc878..ff4054f4334d 100644 --- a/mm/numa_memblks.c +++ b/mm/numa_memblks.c @@ -7,7 +7,7 @@ #include <linux/numa.h> #include <linux/numa_memblks.h> -static int numa_distance_cnt; +int numa_distance_cnt; static u8 *numa_distance; nodemask_t numa_nodes_parsed __initdata; -- 2.43.0 ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-06 12:06 ` [PATCH 1/1] " Bruno Faccini @ 2025-01-14 16:05 ` David Hildenbrand 2025-01-17 5:00 ` [fake numa not working][PATCH " Hyeonggon Yoo 1 sibling, 0 replies; 15+ messages in thread From: David Hildenbrand @ 2025-01-14 16:05 UTC (permalink / raw) To: Bruno Faccini, linux-kernel Cc: linux-mm, akpm, rppt, ziy, jhubbard, mrusiniak, Rafael J. Wysocki, Len Brown, linux-acpi On 06.01.25 13:06, Bruno Faccini wrote: > Current fake-numa implementation prevents new Numa > nodes to be later hot-plugged by drivers. > A common symptom of this limitation is the > "node <X> was absent from the node_possible_map" > message by associated warning in mm/memory_hotplug.c: > add_memory_resource(). > This comes from the lack of remapping in both > pxm_to_node_map[] and node_to_pxm_map[] tables > to take fake-numa nodes into account and thus > triggers collisions with original and physical nodes > only-mapping that had been determined from BIOS tables. > This patch fixes this by doing the necessary node-ids > translation in both pxm_to_node_map[]/node_to_pxm_map[] > tables. > node_distance[] table has also been fixed accordingly. You're allowed to use up to 72 chars per line, and adding some empty lines might make this easier to read. Did you forget to CC ACPI folks + mailing list? > > Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> > --- > drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ > include/acpi/acpi_numa.h | 5 +++ > include/linux/numa_memblks.h | 3 ++ > mm/numa_emulation.c | 45 ++++++++++++++++--- > mm/numa_memblks.c | 2 +- > 5 files changed, 133 insertions(+), 8 deletions(-) > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > index bec0dcd1f9c3..59fffe34c9d0 100644 > --- a/drivers/acpi/numa/srat.c > +++ b/drivers/acpi/numa/srat.c > @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) > } > EXPORT_SYMBOL(acpi_map_pxm_to_node); > > +#ifdef CONFIG_NUMA_EMU > +/* > + * Take max_nid - 1 fake-numa nodes into account in both > + * pxm_to_node_map()/node_to_pxm_map[] tables. > + */ Having the fake-numa stuff in here looks quite hacky; but I'm no expert, so I'll let ACPI folks comment (on CC) on the details. -- Cheers, David / dhildenb ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working][PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-06 12:06 ` [PATCH 1/1] " Bruno Faccini 2025-01-14 16:05 ` David Hildenbrand @ 2025-01-17 5:00 ` Hyeonggon Yoo 2025-01-17 19:09 ` [fake numa not working] [PATCH " Zi Yan 1 sibling, 1 reply; 15+ messages in thread From: Hyeonggon Yoo @ 2025-01-17 5:00 UTC (permalink / raw) To: Bruno Faccini, linux-kernel Cc: kernel_team, 42.hyeyoo, linux-mm, akpm, rppt, david, ziy, jhubbard, mrusiniak On 1/6/2025 9:06 PM, Bruno Faccini wrote: > Current fake-numa implementation prevents new Numa > nodes to be later hot-plugged by drivers. > A common symptom of this limitation is the > "node <X> was absent from the node_possible_map" > message by associated warning in mm/memory_hotplug.c: > add_memory_resource(). > This comes from the lack of remapping in both > pxm_to_node_map[] and node_to_pxm_map[] tables > to take fake-numa nodes into account and thus > triggers collisions with original and physical nodes > only-mapping that had been determined from BIOS tables. > This patch fixes this by doing the necessary node-ids > translation in both pxm_to_node_map[]/node_to_pxm_map[] > tables. > node_distance[] table has also been fixed accordingly. > > Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> Hi Bruno, This commit causes WARN() and disables fakenuma when I pass "numa=fake=4U" on my QEMU setup. Attaching WARN() log and git bisect log to help debugging. Best, Hyeonggon [WARN() splat] [ 0.009676] No NUMA configuration found [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) [ 0.009738] ------------[ cut here ]------------ [ 0.009739] -1 max nid when expected 1 [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 [ 0.009766] Modules linked in: [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 [ 0.009788] Call Trace: [ 0.009790] <TASK> [ 0.009792] ? show_regs+0x71/0x90 [ 0.009797] ? __warn+0x8d/0x150 [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 [ 0.009802] ? report_bug+0x1ab/0x1c0 [ 0.009805] ? fixup_exception+0x27/0x380 [ 0.009809] ? early_fixup_exception+0xa2/0xf0 [ 0.009813] ? do_early_exception+0x28/0x90 [ 0.009816] ? early_idt_handler_common+0x2f/0x3a [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 [ 0.009828] numa_emulation+0x4e3/0xad0 [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 [ 0.009836] numa_memblks_init+0x10c/0x2c0 [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 [ 0.009840] numa_init+0x61/0x3e0 [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 [ 0.009846] x86_numa_init+0x65/0x80 [ 0.009848] initmem_init+0xe/0x20 [ 0.009850] setup_arch+0x9d8/0xfa0 [ 0.009852] ? _printk+0x58/0x90 [ 0.009855] start_kernel+0x5f/0xb50 [ 0.009860] x86_64_start_reservations+0x18/0x30 [ 0.009863] x86_64_start_kernel+0xc0/0x110 [ 0.009864] ? setup_ghcb+0xe/0x140 [ 0.009867] common_startup_64+0x13e/0x141 [ 0.009871] </TASK> [ 0.009871] ---[ end trace 0000000000000000 ]--- [Git bisect log] # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device git bisect bad 8646971f02651146554233d63fdd721f5f060973 # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > --- > drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ > include/acpi/acpi_numa.h | 5 +++ > include/linux/numa_memblks.h | 3 ++ > mm/numa_emulation.c | 45 ++++++++++++++++--- > mm/numa_memblks.c | 2 +- > 5 files changed, 133 insertions(+), 8 deletions(-) > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > index bec0dcd1f9c3..59fffe34c9d0 100644 > --- a/drivers/acpi/numa/srat.c > +++ b/drivers/acpi/numa/srat.c > @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) > } > EXPORT_SYMBOL(acpi_map_pxm_to_node); > > +#ifdef CONFIG_NUMA_EMU > +/* > + * Take max_nid - 1 fake-numa nodes into account in both > + * pxm_to_node_map()/node_to_pxm_map[] tables. > + */ > +int __init fix_pxm_node_maps(int max_nid) > +{ > + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata > + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; > + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata > + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; > + int i, j, index = -1, count = 0; > + nodemask_t nodes_to_enable; > + > + if (numa_off || srat_disabled()) > + return -1; > + > + /* find fake nodes PXM mapping */ > + for (i = 0; i < MAX_NUMNODES; i++) { > + if (node_to_pxm_map[i] != PXM_INVAL) { > + for (j = 0; j <= max_nid; j++) { > + if ((emu_nid_to_phys[j] == i) && > + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, > + "Node %d is already binded to PXM %d\n", > + j, node_to_pxm_map_copy[j])) > + return -1; > + if (emu_nid_to_phys[j] == i) { > + node_to_pxm_map_copy[j] = > + node_to_pxm_map[i]; > + if (j > index) > + index = j; > + count++; > + } > + } > + } > + } > + if (WARN(index != max_nid, "%d max nid when expected %d\n", > + index, max_nid)) > + return -1; > + > + nodes_clear(nodes_to_enable); > + > + /* map phys nodes not used for fake nodes */ > + for (i = 0; i < MAX_NUMNODES; i++) { > + if (node_to_pxm_map[i] != PXM_INVAL) { > + for (j = 0; j <= max_nid; j++) > + if (emu_nid_to_phys[j] == i) > + break; > + /* fake nodes PXM mapping has been done */ > + if (j <= max_nid) > + continue; > + /* find first hole */ > + for (j = 0; > + j < MAX_NUMNODES && > + node_to_pxm_map_copy[j] != PXM_INVAL; > + j++) > + ; > + if (WARN(j == MAX_NUMNODES, > + "Number of nodes exceeds MAX_NUMNODES\n")) > + return -1; > + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; > + node_set(j, nodes_to_enable); > + count++; > + } > + } > + > + /* creating reverse mapping in pxm_to_node_map[] */ > + for (i = 0; i < MAX_NUMNODES; i++) > + if (node_to_pxm_map_copy[i] != PXM_INVAL && > + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) > + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; > + > + /* overwrite with new mapping */ > + for (i = 0; i < MAX_NUMNODES; i++) { > + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; > + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; > + } > + > + /* enable other nodes found in PXM for hotplug */ > + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); > + > + pr_debug("found %d total number of nodes\n", count); > + return 0; > +} > +#endif > + > static void __init > acpi_table_print_srat_entry(struct acpi_subtable_header *header) > { > diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h > index b5f594754a9e..99b960bd473c 100644 > --- a/include/acpi/acpi_numa.h > +++ b/include/acpi/acpi_numa.h > @@ -17,11 +17,16 @@ extern int node_to_pxm(int); > extern int acpi_map_pxm_to_node(int); > extern unsigned char acpi_srat_revision; > extern void disable_srat(void); > +extern int fix_pxm_node_maps(int max_nid); > > extern void bad_srat(void); > extern int srat_disabled(void); > > #else /* CONFIG_ACPI_NUMA */ > +static inline int fix_pxm_node_maps(int max_nid) > +{ > + return 0; > +} > static inline void disable_srat(void) > { > } > diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h > index cfad6ce7e1bd..dd85613cdd86 100644 > --- a/include/linux/numa_memblks.h > +++ b/include/linux/numa_memblks.h > @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); > int __init numa_memblks_init(int (*init_func)(void), > bool memblock_force_top_down); > > +extern int numa_distance_cnt; > + > #ifdef CONFIG_NUMA_EMU > +extern int emu_nid_to_phys[MAX_NUMNODES]; > int numa_emu_cmdline(char *str); > void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, > unsigned int nr_emu_nids); > diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c > index 031fb9961bf7..9d55679d99ce 100644 > --- a/mm/numa_emulation.c > +++ b/mm/numa_emulation.c > @@ -8,11 +8,12 @@ > #include <linux/memblock.h> > #include <linux/numa_memblks.h> > #include <asm/numa.h> > +#include <acpi/acpi_numa.h> > > #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) > #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) > > -static int emu_nid_to_phys[MAX_NUMNODES]; > +int emu_nid_to_phys[MAX_NUMNODES]; > static char *emu_cmdline __initdata; > > int __init numa_emu_cmdline(char *str) > @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); > int max_emu_nid, dfl_phys_nid; > int i, j, ret; > + nodemask_t physnode_mask = numa_nodes_parsed; > > if (!emu_cmdline) > goto no_emu; > @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > * split the system RAM into N fake nodes. > */ > if (strchr(emu_cmdline, 'U')) { > - nodemask_t physnode_mask = numa_nodes_parsed; > unsigned long n; > int nid = 0; > > @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > */ > max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); > > - /* commit */ > - *numa_meminfo = ei; > - > /* Make sure numa_nodes_parsed only contains emulated nodes */ > nodes_clear(numa_nodes_parsed); > for (i = 0; i < ARRAY_SIZE(ei.blk); i++) > @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > ei.blk[i].nid != NUMA_NO_NODE) > node_set(ei.blk[i].nid, numa_nodes_parsed); > > - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); > + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision > + * with faked numa nodes, particularly during later memory hotplug > + * handling, and also update numa_nodes_parsed accordingly. > + */ > + ret = fix_pxm_node_maps(max_emu_nid); > + if (ret < 0) > + goto no_emu; > + > + /* commit */ > + *numa_meminfo = ei; > + > + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); > > /* make sure all emulated nodes are mapped to a physical node */ > - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > + for (i = 0; i < max_emu_nid + 1; i++) > if (emu_nid_to_phys[i] == NUMA_NO_NODE) > emu_nid_to_phys[i] = dfl_phys_nid; > > @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > numa_set_distance(i, j, dist); > } > } > + for (i = 0; i < numa_distance_cnt; i++) { > + for (j = 0; j < numa_distance_cnt; j++) { > + int physi, physj; > + u8 dist; > + > + /* distance between fake nodes is already ok */ > + if (emu_nid_to_phys[i] != NUMA_NO_NODE && > + emu_nid_to_phys[j] != NUMA_NO_NODE) > + continue; > + if (emu_nid_to_phys[i] != NUMA_NO_NODE) > + physi = emu_nid_to_phys[i]; > + else > + physi = i - max_emu_nid; > + if (emu_nid_to_phys[j] != NUMA_NO_NODE) > + physj = emu_nid_to_phys[j]; > + else > + physj = j - max_emu_nid; > + dist = phys_dist[physi * numa_dist_cnt + physj]; > + numa_set_distance(i, j, dist); > + } > + } > > /* free the copied physical distance table */ > memblock_free(phys_dist, phys_size); > return; > > no_emu: > + numa_nodes_parsed = physnode_mask; > /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ > for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > emu_nid_to_phys[i] = i; > diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c > index a3877e9bc878..ff4054f4334d 100644 > --- a/mm/numa_memblks.c > +++ b/mm/numa_memblks.c > @@ -7,7 +7,7 @@ > #include <linux/numa.h> > #include <linux/numa_memblks.h> > > -static int numa_distance_cnt; > +int numa_distance_cnt; > static u8 *numa_distance; > > nodemask_t numa_nodes_parsed __initdata; ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-17 5:00 ` [fake numa not working][PATCH " Hyeonggon Yoo @ 2025-01-17 19:09 ` Zi Yan 2025-01-20 0:37 ` Hyeonggon Yoo 0 siblings, 1 reply; 15+ messages in thread From: Zi Yan @ 2025-01-17 19:09 UTC (permalink / raw) To: Hyeonggon Yoo Cc: Bruno Faccini, linux-kernel, kernel_team, 42.hyeyoo, linux-mm, akpm, rppt, david, jhubbard, mrusiniak On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: > On 1/6/2025 9:06 PM, Bruno Faccini wrote: >> Current fake-numa implementation prevents new Numa >> nodes to be later hot-plugged by drivers. >> A common symptom of this limitation is the >> "node <X> was absent from the node_possible_map" >> message by associated warning in mm/memory_hotplug.c: >> add_memory_resource(). >> This comes from the lack of remapping in both >> pxm_to_node_map[] and node_to_pxm_map[] tables >> to take fake-numa nodes into account and thus >> triggers collisions with original and physical nodes >> only-mapping that had been determined from BIOS tables. >> This patch fixes this by doing the necessary node-ids >> translation in both pxm_to_node_map[]/node_to_pxm_map[] >> tables. >> node_distance[] table has also been fixed accordingly. >> >> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> > > Hi Bruno, > > This commit causes WARN() and disables fakenuma > when I pass "numa=fake=4U" on my QEMU setup. > > Attaching WARN() log and git bisect log to help debugging. Is your VM getting 4 NUMA nodes at the end? Can you also share your QEMU command line and your kernel config? This can help Bruno reproduce the issue locally. At least, I cannot reproduce it on mm-everything-2025-01-16-23-18. I also notice that my VM does not have “No NUMA configuration found” (in your log) in its kernel log and that might explain why I could not reproduce it. Thanks. > > Best, > Hyeonggon > > [WARN() splat] > > [ 0.009676] No NUMA configuration found > [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] > [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB > [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) > [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) > [ 0.009738] ------------[ cut here ]------------ > [ 0.009739] -1 max nid when expected 1 > [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 > [ 0.009766] Modules linked in: > [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 > [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 > [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 > [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 > [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 > [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 > [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 > [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 > [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 > [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 > [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 > [ 0.009788] Call Trace: > [ 0.009790] <TASK> > [ 0.009792] ? show_regs+0x71/0x90 > [ 0.009797] ? __warn+0x8d/0x150 > [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 > [ 0.009802] ? report_bug+0x1ab/0x1c0 > [ 0.009805] ? fixup_exception+0x27/0x380 > [ 0.009809] ? early_fixup_exception+0xa2/0xf0 > [ 0.009813] ? do_early_exception+0x28/0x90 > [ 0.009816] ? early_idt_handler_common+0x2f/0x3a > [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 > [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 > [ 0.009828] numa_emulation+0x4e3/0xad0 > [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 > [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 > [ 0.009836] numa_memblks_init+0x10c/0x2c0 > [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 > [ 0.009840] numa_init+0x61/0x3e0 > [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 > [ 0.009846] x86_numa_init+0x65/0x80 > [ 0.009848] initmem_init+0xe/0x20 > [ 0.009850] setup_arch+0x9d8/0xfa0 > [ 0.009852] ? _printk+0x58/0x90 > [ 0.009855] start_kernel+0x5f/0xb50 > [ 0.009860] x86_64_start_reservations+0x18/0x30 > [ 0.009863] x86_64_start_kernel+0xc0/0x110 > [ 0.009864] ? setup_ghcb+0xe/0x140 > [ 0.009867] common_startup_64+0x13e/0x141 > [ 0.009871] </TASK> > [ 0.009871] ---[ end trace 0000000000000000 ]--- > > [Git bisect log] > > # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() > git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 > # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) > git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 > # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper > git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 > # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD > git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 > # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device > git bisect bad 8646971f02651146554233d63fdd721f5f060973 > # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action > git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 > # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file > git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd > # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface > git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 > # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface > git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 > # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak > git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab > # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d > # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > >> --- >> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ >> include/acpi/acpi_numa.h | 5 +++ >> include/linux/numa_memblks.h | 3 ++ >> mm/numa_emulation.c | 45 ++++++++++++++++--- >> mm/numa_memblks.c | 2 +- >> 5 files changed, 133 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >> index bec0dcd1f9c3..59fffe34c9d0 100644 >> --- a/drivers/acpi/numa/srat.c >> +++ b/drivers/acpi/numa/srat.c >> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >> } >> EXPORT_SYMBOL(acpi_map_pxm_to_node); >> +#ifdef CONFIG_NUMA_EMU >> +/* >> + * Take max_nid - 1 fake-numa nodes into account in both >> + * pxm_to_node_map()/node_to_pxm_map[] tables. >> + */ >> +int __init fix_pxm_node_maps(int max_nid) >> +{ >> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >> + int i, j, index = -1, count = 0; >> + nodemask_t nodes_to_enable; >> + >> + if (numa_off || srat_disabled()) >> + return -1; >> + >> + /* find fake nodes PXM mapping */ >> + for (i = 0; i < MAX_NUMNODES; i++) { >> + if (node_to_pxm_map[i] != PXM_INVAL) { >> + for (j = 0; j <= max_nid; j++) { >> + if ((emu_nid_to_phys[j] == i) && >> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >> + "Node %d is already binded to PXM %d\n", >> + j, node_to_pxm_map_copy[j])) >> + return -1; >> + if (emu_nid_to_phys[j] == i) { >> + node_to_pxm_map_copy[j] = >> + node_to_pxm_map[i]; >> + if (j > index) >> + index = j; >> + count++; >> + } >> + } >> + } >> + } >> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >> + index, max_nid)) >> + return -1; >> + >> + nodes_clear(nodes_to_enable); >> + >> + /* map phys nodes not used for fake nodes */ >> + for (i = 0; i < MAX_NUMNODES; i++) { >> + if (node_to_pxm_map[i] != PXM_INVAL) { >> + for (j = 0; j <= max_nid; j++) >> + if (emu_nid_to_phys[j] == i) >> + break; >> + /* fake nodes PXM mapping has been done */ >> + if (j <= max_nid) >> + continue; >> + /* find first hole */ >> + for (j = 0; >> + j < MAX_NUMNODES && >> + node_to_pxm_map_copy[j] != PXM_INVAL; >> + j++) >> + ; >> + if (WARN(j == MAX_NUMNODES, >> + "Number of nodes exceeds MAX_NUMNODES\n")) >> + return -1; >> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >> + node_set(j, nodes_to_enable); >> + count++; >> + } >> + } >> + >> + /* creating reverse mapping in pxm_to_node_map[] */ >> + for (i = 0; i < MAX_NUMNODES; i++) >> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) >> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >> + >> + /* overwrite with new mapping */ >> + for (i = 0; i < MAX_NUMNODES; i++) { >> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >> + } >> + >> + /* enable other nodes found in PXM for hotplug */ >> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); >> + >> + pr_debug("found %d total number of nodes\n", count); >> + return 0; >> +} >> +#endif >> + >> static void __init >> acpi_table_print_srat_entry(struct acpi_subtable_header *header) >> { >> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >> index b5f594754a9e..99b960bd473c 100644 >> --- a/include/acpi/acpi_numa.h >> +++ b/include/acpi/acpi_numa.h >> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >> extern int acpi_map_pxm_to_node(int); >> extern unsigned char acpi_srat_revision; >> extern void disable_srat(void); >> +extern int fix_pxm_node_maps(int max_nid); >> extern void bad_srat(void); >> extern int srat_disabled(void); >> #else /* CONFIG_ACPI_NUMA */ >> +static inline int fix_pxm_node_maps(int max_nid) >> +{ >> + return 0; >> +} >> static inline void disable_srat(void) >> { >> } >> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h >> index cfad6ce7e1bd..dd85613cdd86 100644 >> --- a/include/linux/numa_memblks.h >> +++ b/include/linux/numa_memblks.h >> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); >> int __init numa_memblks_init(int (*init_func)(void), >> bool memblock_force_top_down); >> +extern int numa_distance_cnt; >> + >> #ifdef CONFIG_NUMA_EMU >> +extern int emu_nid_to_phys[MAX_NUMNODES]; >> int numa_emu_cmdline(char *str); >> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >> unsigned int nr_emu_nids); >> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >> index 031fb9961bf7..9d55679d99ce 100644 >> --- a/mm/numa_emulation.c >> +++ b/mm/numa_emulation.c >> @@ -8,11 +8,12 @@ >> #include <linux/memblock.h> >> #include <linux/numa_memblks.h> >> #include <asm/numa.h> >> +#include <acpi/acpi_numa.h> >> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) >> -static int emu_nid_to_phys[MAX_NUMNODES]; >> +int emu_nid_to_phys[MAX_NUMNODES]; >> static char *emu_cmdline __initdata; >> int __init numa_emu_cmdline(char *str) >> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); >> int max_emu_nid, dfl_phys_nid; >> int i, j, ret; >> + nodemask_t physnode_mask = numa_nodes_parsed; >> if (!emu_cmdline) >> goto no_emu; >> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >> * split the system RAM into N fake nodes. >> */ >> if (strchr(emu_cmdline, 'U')) { >> - nodemask_t physnode_mask = numa_nodes_parsed; >> unsigned long n; >> int nid = 0; >> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >> */ >> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >> - /* commit */ >> - *numa_meminfo = ei; >> - >> /* Make sure numa_nodes_parsed only contains emulated nodes */ >> nodes_clear(numa_nodes_parsed); >> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >> ei.blk[i].nid != NUMA_NO_NODE) >> node_set(ei.blk[i].nid, numa_nodes_parsed); >> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); >> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision >> + * with faked numa nodes, particularly during later memory hotplug >> + * handling, and also update numa_nodes_parsed accordingly. >> + */ >> + ret = fix_pxm_node_maps(max_emu_nid); >> + if (ret < 0) >> + goto no_emu; >> + >> + /* commit */ >> + *numa_meminfo = ei; >> + >> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >> /* make sure all emulated nodes are mapped to a physical node */ >> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >> + for (i = 0; i < max_emu_nid + 1; i++) >> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >> emu_nid_to_phys[i] = dfl_phys_nid; >> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >> numa_set_distance(i, j, dist); >> } >> } >> + for (i = 0; i < numa_distance_cnt; i++) { >> + for (j = 0; j < numa_distance_cnt; j++) { >> + int physi, physj; >> + u8 dist; >> + >> + /* distance between fake nodes is already ok */ >> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >> + emu_nid_to_phys[j] != NUMA_NO_NODE) >> + continue; >> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >> + physi = emu_nid_to_phys[i]; >> + else >> + physi = i - max_emu_nid; >> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >> + physj = emu_nid_to_phys[j]; >> + else >> + physj = j - max_emu_nid; >> + dist = phys_dist[physi * numa_dist_cnt + physj]; >> + numa_set_distance(i, j, dist); >> + } >> + } >> /* free the copied physical distance table */ >> memblock_free(phys_dist, phys_size); >> return; >> no_emu: >> + numa_nodes_parsed = physnode_mask; >> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ >> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >> emu_nid_to_phys[i] = i; >> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >> index a3877e9bc878..ff4054f4334d 100644 >> --- a/mm/numa_memblks.c >> +++ b/mm/numa_memblks.c >> @@ -7,7 +7,7 @@ >> #include <linux/numa.h> >> #include <linux/numa_memblks.h> >> -static int numa_distance_cnt; >> +int numa_distance_cnt; >> static u8 *numa_distance; >> nodemask_t numa_nodes_parsed __initdata; Best Regards, Yan, Zi ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-17 19:09 ` [fake numa not working] [PATCH " Zi Yan @ 2025-01-20 0:37 ` Hyeonggon Yoo 2025-01-20 2:16 ` Zi Yan 0 siblings, 1 reply; 15+ messages in thread From: Hyeonggon Yoo @ 2025-01-20 0:37 UTC (permalink / raw) To: Zi Yan Cc: kernel_team, 42.hyeyoo, Bruno Faccini, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak [-- Attachment #1: Type: text/plain, Size: 16542 bytes --] On 1/18/2025 4:09 AM, Zi Yan wrote: > On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: > >> On 1/6/2025 9:06 PM, Bruno Faccini wrote: >>> Current fake-numa implementation prevents new Numa >>> nodes to be later hot-plugged by drivers. >>> A common symptom of this limitation is the >>> "node <X> was absent from the node_possible_map" >>> message by associated warning in mm/memory_hotplug.c: >>> add_memory_resource(). >>> This comes from the lack of remapping in both >>> pxm_to_node_map[] and node_to_pxm_map[] tables >>> to take fake-numa nodes into account and thus >>> triggers collisions with original and physical nodes >>> only-mapping that had been determined from BIOS tables. >>> This patch fixes this by doing the necessary node-ids >>> translation in both pxm_to_node_map[]/node_to_pxm_map[] >>> tables. >>> node_distance[] table has also been fixed accordingly. >>> >>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> >> >> Hi Bruno, >> >> This commit causes WARN() and disables fakenuma >> when I pass "numa=fake=4U" on my QEMU setup. >> >> Attaching WARN() log and git bisect log to help debugging. > > Is your VM getting 4 NUMA nodes at the end? No, it only gets node 0 at the end. > Can you also share your QEMU command line and your kernel config? The config is attached (fakenuma.config) QEMU command line: $ qemu-system-x86_64 \ -cpu host \ -enable-kvm \ -smp $(nproc) \ -m 32G \ -nographic \ -kernel arch/x86/boot/bzImage \ -initrd ../../rootfs.cpio.gz \ -nic user,model=virtio-net-pci \ -append "console=ttyS0 numa=fake=4U" > This can help Bruno reproduce the issue locally. At least, I > cannot reproduce it on mm-everything-2025-01-16-23-18. Still reproduced on mm-everything-2025-01-18-04-55 with my setup. > I also > notice that my VM does not have “No NUMA configuration found” > (in your log) in its kernel log and that might explain > why I could not reproduce it. Did you do NUMA configuration (-numa in QEMU) for your VM? I didn't, but it's still expected to work 'cause it's fake numa. Best, Hyeonggon >> >> [WARN() splat] >> >> [ 0.009676] No NUMA configuration found >> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] >> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB >> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) >> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) >> [ 0.009738] ------------[ cut here ]------------ >> [ 0.009739] -1 max nid when expected 1 >> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 >> [ 0.009766] Modules linked in: >> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 >> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 >> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 >> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 >> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 >> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 >> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 >> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 >> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 >> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 >> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 >> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 >> [ 0.009788] Call Trace: >> [ 0.009790] <TASK> >> [ 0.009792] ? show_regs+0x71/0x90 >> [ 0.009797] ? __warn+0x8d/0x150 >> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 >> [ 0.009802] ? report_bug+0x1ab/0x1c0 >> [ 0.009805] ? fixup_exception+0x27/0x380 >> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 >> [ 0.009813] ? do_early_exception+0x28/0x90 >> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a >> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 >> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 >> [ 0.009828] numa_emulation+0x4e3/0xad0 >> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 >> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 >> [ 0.009836] numa_memblks_init+0x10c/0x2c0 >> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 >> [ 0.009840] numa_init+0x61/0x3e0 >> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 >> [ 0.009846] x86_numa_init+0x65/0x80 >> [ 0.009848] initmem_init+0xe/0x20 >> [ 0.009850] setup_arch+0x9d8/0xfa0 >> [ 0.009852] ? _printk+0x58/0x90 >> [ 0.009855] start_kernel+0x5f/0xb50 >> [ 0.009860] x86_64_start_reservations+0x18/0x30 >> [ 0.009863] x86_64_start_kernel+0xc0/0x110 >> [ 0.009864] ? setup_ghcb+0xe/0x140 >> [ 0.009867] common_startup_64+0x13e/0x141 >> [ 0.009871] </TASK> >> [ 0.009871] ---[ end trace 0000000000000000 ]--- >> >> [Git bisect log] >> >> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() >> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 >> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) >> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 >> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper >> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 >> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD >> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 >> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device >> git bisect bad 8646971f02651146554233d63fdd721f5f060973 >> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action >> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 >> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file >> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd >> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface >> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 >> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface >> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 >> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak >> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab >> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d >> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >> >>> --- >>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ >>> include/acpi/acpi_numa.h | 5 +++ >>> include/linux/numa_memblks.h | 3 ++ >>> mm/numa_emulation.c | 45 ++++++++++++++++--- >>> mm/numa_memblks.c | 2 +- >>> 5 files changed, 133 insertions(+), 8 deletions(-) >>> >>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >>> index bec0dcd1f9c3..59fffe34c9d0 100644 >>> --- a/drivers/acpi/numa/srat.c >>> +++ b/drivers/acpi/numa/srat.c >>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >>> } >>> EXPORT_SYMBOL(acpi_map_pxm_to_node); >>> +#ifdef CONFIG_NUMA_EMU >>> +/* >>> + * Take max_nid - 1 fake-numa nodes into account in both >>> + * pxm_to_node_map()/node_to_pxm_map[] tables. >>> + */ >>> +int __init fix_pxm_node_maps(int max_nid) >>> +{ >>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >>> + int i, j, index = -1, count = 0; >>> + nodemask_t nodes_to_enable; >>> + >>> + if (numa_off || srat_disabled()) >>> + return -1; >>> + >>> + /* find fake nodes PXM mapping */ >>> + for (i = 0; i < MAX_NUMNODES; i++) { >>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>> + for (j = 0; j <= max_nid; j++) { >>> + if ((emu_nid_to_phys[j] == i) && >>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >>> + "Node %d is already binded to PXM %d\n", >>> + j, node_to_pxm_map_copy[j])) >>> + return -1; >>> + if (emu_nid_to_phys[j] == i) { >>> + node_to_pxm_map_copy[j] = >>> + node_to_pxm_map[i]; >>> + if (j > index) >>> + index = j; >>> + count++; >>> + } >>> + } >>> + } >>> + } >>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >>> + index, max_nid)) >>> + return -1; >>> + >>> + nodes_clear(nodes_to_enable); >>> + >>> + /* map phys nodes not used for fake nodes */ >>> + for (i = 0; i < MAX_NUMNODES; i++) { >>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>> + for (j = 0; j <= max_nid; j++) >>> + if (emu_nid_to_phys[j] == i) >>> + break; >>> + /* fake nodes PXM mapping has been done */ >>> + if (j <= max_nid) >>> + continue; >>> + /* find first hole */ >>> + for (j = 0; >>> + j < MAX_NUMNODES && >>> + node_to_pxm_map_copy[j] != PXM_INVAL; >>> + j++) >>> + ; >>> + if (WARN(j == MAX_NUMNODES, >>> + "Number of nodes exceeds MAX_NUMNODES\n")) >>> + return -1; >>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >>> + node_set(j, nodes_to_enable); >>> + count++; >>> + } >>> + } >>> + >>> + /* creating reverse mapping in pxm_to_node_map[] */ >>> + for (i = 0; i < MAX_NUMNODES; i++) >>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) >>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >>> + >>> + /* overwrite with new mapping */ >>> + for (i = 0; i < MAX_NUMNODES; i++) { >>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >>> + } >>> + >>> + /* enable other nodes found in PXM for hotplug */ >>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); >>> + >>> + pr_debug("found %d total number of nodes\n", count); >>> + return 0; >>> +} >>> +#endif >>> + >>> static void __init >>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) >>> { >>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >>> index b5f594754a9e..99b960bd473c 100644 >>> --- a/include/acpi/acpi_numa.h >>> +++ b/include/acpi/acpi_numa.h >>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >>> extern int acpi_map_pxm_to_node(int); >>> extern unsigned char acpi_srat_revision; >>> extern void disable_srat(void); >>> +extern int fix_pxm_node_maps(int max_nid); >>> extern void bad_srat(void); >>> extern int srat_disabled(void); >>> #else /* CONFIG_ACPI_NUMA */ >>> +static inline int fix_pxm_node_maps(int max_nid) >>> +{ >>> + return 0; >>> +} >>> static inline void disable_srat(void) >>> { >>> } >>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h >>> index cfad6ce7e1bd..dd85613cdd86 100644 >>> --- a/include/linux/numa_memblks.h >>> +++ b/include/linux/numa_memblks.h >>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); >>> int __init numa_memblks_init(int (*init_func)(void), >>> bool memblock_force_top_down); >>> +extern int numa_distance_cnt; >>> + >>> #ifdef CONFIG_NUMA_EMU >>> +extern int emu_nid_to_phys[MAX_NUMNODES]; >>> int numa_emu_cmdline(char *str); >>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >>> unsigned int nr_emu_nids); >>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >>> index 031fb9961bf7..9d55679d99ce 100644 >>> --- a/mm/numa_emulation.c >>> +++ b/mm/numa_emulation.c >>> @@ -8,11 +8,12 @@ >>> #include <linux/memblock.h> >>> #include <linux/numa_memblks.h> >>> #include <asm/numa.h> >>> +#include <acpi/acpi_numa.h> >>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) >>> -static int emu_nid_to_phys[MAX_NUMNODES]; >>> +int emu_nid_to_phys[MAX_NUMNODES]; >>> static char *emu_cmdline __initdata; >>> int __init numa_emu_cmdline(char *str) >>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); >>> int max_emu_nid, dfl_phys_nid; >>> int i, j, ret; >>> + nodemask_t physnode_mask = numa_nodes_parsed; >>> if (!emu_cmdline) >>> goto no_emu; >>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>> * split the system RAM into N fake nodes. >>> */ >>> if (strchr(emu_cmdline, 'U')) { >>> - nodemask_t physnode_mask = numa_nodes_parsed; >>> unsigned long n; >>> int nid = 0; >>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>> */ >>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >>> - /* commit */ >>> - *numa_meminfo = ei; >>> - >>> /* Make sure numa_nodes_parsed only contains emulated nodes */ >>> nodes_clear(numa_nodes_parsed); >>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>> ei.blk[i].nid != NUMA_NO_NODE) >>> node_set(ei.blk[i].nid, numa_nodes_parsed); >>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); >>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision >>> + * with faked numa nodes, particularly during later memory hotplug >>> + * handling, and also update numa_nodes_parsed accordingly. >>> + */ >>> + ret = fix_pxm_node_maps(max_emu_nid); >>> + if (ret < 0) >>> + goto no_emu; >>> + >>> + /* commit */ >>> + *numa_meminfo = ei; >>> + >>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >>> /* make sure all emulated nodes are mapped to a physical node */ >>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>> + for (i = 0; i < max_emu_nid + 1; i++) >>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >>> emu_nid_to_phys[i] = dfl_phys_nid; >>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>> numa_set_distance(i, j, dist); >>> } >>> } >>> + for (i = 0; i < numa_distance_cnt; i++) { >>> + for (j = 0; j < numa_distance_cnt; j++) { >>> + int physi, physj; >>> + u8 dist; >>> + >>> + /* distance between fake nodes is already ok */ >>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >>> + emu_nid_to_phys[j] != NUMA_NO_NODE) >>> + continue; >>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >>> + physi = emu_nid_to_phys[i]; >>> + else >>> + physi = i - max_emu_nid; >>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >>> + physj = emu_nid_to_phys[j]; >>> + else >>> + physj = j - max_emu_nid; >>> + dist = phys_dist[physi * numa_dist_cnt + physj]; >>> + numa_set_distance(i, j, dist); >>> + } >>> + } >>> /* free the copied physical distance table */ >>> memblock_free(phys_dist, phys_size); >>> return; >>> no_emu: >>> + numa_nodes_parsed = physnode_mask; >>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ >>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>> emu_nid_to_phys[i] = i; >>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >>> index a3877e9bc878..ff4054f4334d 100644 >>> --- a/mm/numa_memblks.c >>> +++ b/mm/numa_memblks.c >>> @@ -7,7 +7,7 @@ >>> #include <linux/numa.h> >>> #include <linux/numa_memblks.h> >>> -static int numa_distance_cnt; >>> +int numa_distance_cnt; >>> static u8 *numa_distance; >>> nodemask_t numa_nodes_parsed __initdata; > > > Best Regards, > Yan, Zi > [-- Attachment #2: fakenuma.config --] [-- Type: text/plain, Size: 175657 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86 6.13.0-rc6 Kernel Configuration # CONFIG_CC_VERSION_TEXT="gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0" CONFIG_CC_IS_GCC=y CONFIG_GCC_VERSION=110400 CONFIG_CLANG_VERSION=0 CONFIG_AS_IS_GNU=y CONFIG_AS_VERSION=23800 CONFIG_LD_IS_BFD=y CONFIG_LD_VERSION=23800 CONFIG_LLD_VERSION=0 CONFIG_RUSTC_VERSION=0 CONFIG_RUSTC_LLVM_VERSION=0 CONFIG_CC_CAN_LINK=y CONFIG_CC_CAN_LINK_STATIC=y CONFIG_GCC_ASM_GOTO_OUTPUT_BROKEN=y CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_CC_HAS_ASM_INLINE=y CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y CONFIG_PAHOLE_VERSION=0 CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 # CONFIG_COMPILE_TEST is not set # CONFIG_WERROR is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_HAVE_KERNEL_ZSTD=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_KERNEL_ZSTD=y CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_SYSVIPC_COMPAT=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_WATCH_QUEUE=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_USELIB=y CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y CONFIG_AUDITSYSCALL=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GENERIC_IRQ_MIGRATION=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_IRQ_MSI_IOMMU=y CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y CONFIG_GENERIC_IRQ_RESERVATION_MODE=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y # CONFIG_GENERIC_IRQ_DEBUGFS is not set # end of IRQ subsystem CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_INIT=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST_IDLE=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y # CONFIG_TIME_KUNIT_TEST is not set CONFIG_CONTEXT_TRACKING=y CONFIG_CONTEXT_TRACKING_IDLE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set # CONFIG_NO_HZ_IDLE is not set CONFIG_NO_HZ_FULL=y CONFIG_CONTEXT_TRACKING_USER=y # CONFIG_CONTEXT_TRACKING_USER_FORCE is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100 # end of Timers subsystem CONFIG_BPF=y CONFIG_HAVE_EBPF_JIT=y CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y # # BPF subsystem # CONFIG_BPF_SYSCALL=y CONFIG_BPF_JIT=y CONFIG_BPF_JIT_ALWAYS_ON=y CONFIG_BPF_JIT_DEFAULT_ON=y CONFIG_BPF_UNPRIV_DEFAULT_OFF=y # CONFIG_BPF_PRELOAD is not set CONFIG_BPF_LSM=y # end of BPF subsystem CONFIG_PREEMPT_BUILD=y CONFIG_ARCH_HAS_PREEMPT_LAZY=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_PREEMPT_LAZY is not set # CONFIG_PREEMPT_RT is not set CONFIG_PREEMPT_COUNT=y CONFIG_PREEMPTION=y CONFIG_PREEMPT_DYNAMIC=y CONFIG_SCHED_CORE=y # # CPU/Task time and stats accounting # CONFIG_VIRT_CPU_ACCOUNTING=y CONFIG_VIRT_CPU_ACCOUNTING_GEN=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_PSI=y # CONFIG_PSI_DEFAULT_DISABLED is not set # end of CPU/Task time and stats accounting CONFIG_CPU_ISOLATION=y # # RCU Subsystem # CONFIG_TREE_RCU=y CONFIG_PREEMPT_RCU=y # CONFIG_RCU_EXPERT is not set CONFIG_TREE_SRCU=y CONFIG_TASKS_RCU_GENERIC=y CONFIG_NEED_TASKS_RCU=y CONFIG_TASKS_RCU=y CONFIG_TASKS_RUDE_RCU=y CONFIG_TASKS_TRACE_RCU=y CONFIG_RCU_STALL_COMMON=y CONFIG_RCU_NEED_SEGCBLIST=y CONFIG_RCU_NOCB_CPU=y # CONFIG_RCU_NOCB_CPU_DEFAULT_ALL is not set CONFIG_RCU_LAZY=y CONFIG_RCU_LAZY_DEFAULT_OFF=y # end of RCU Subsystem CONFIG_IKCONFIG=m # CONFIG_IKCONFIG_PROC is not set # CONFIG_IKHEADERS is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 # CONFIG_PRINTK_INDEX is not set CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y # # Scheduler features # CONFIG_UCLAMP_TASK=y CONFIG_UCLAMP_BUCKETS_COUNT=5 # end of Scheduler features CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_CC_HAS_INT128=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC10_NO_ARRAY_BOUNDS=y CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_GCC_NO_STRINGOP_OVERFLOW=y CONFIG_CC_NO_STRINGOP_OVERFLOW=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y CONFIG_SLAB_OBJ_EXT=y CONFIG_CGROUPS=y CONFIG_PAGE_COUNTER=y # CONFIG_CGROUP_FAVOR_DYNMODS is not set CONFIG_MEMCG=y # CONFIG_MEMCG_V1 is not set CONFIG_BLK_CGROUP=y CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_GROUP_SCHED_WEIGHT=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_SCHED_MM_CID=y CONFIG_UCLAMP_TASK_GROUP=y CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_HUGETLB=y CONFIG_CPUSETS=y # CONFIG_CPUSETS_V1 is not set CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_CGROUP_PERF=y CONFIG_CGROUP_BPF=y CONFIG_CGROUP_MISC=y # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_TIME_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_CHECKPOINT_RESTORE=y CONFIG_SCHED_AUTOGROUP=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y CONFIG_RD_ZSTD=y CONFIG_BOOT_CONFIG=y # CONFIG_BOOT_CONFIG_FORCE is not set # CONFIG_BOOT_CONFIG_EMBED is not set CONFIG_INITRAMFS_PRESERVE_MTIME=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_LD_ORPHAN_WARN=y CONFIG_LD_ORPHAN_WARN_LEVEL="warn" CONFIG_SYSCTL=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y CONFIG_FHANDLE=y CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y # CONFIG_BASE_SMALL is not set CONFIG_FUTEX=y CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y CONFIG_MEMBARRIER=y CONFIG_KCMP=y CONFIG_RSEQ=y # CONFIG_DEBUG_RSEQ is not set CONFIG_CACHESTAT_SYSCALL=y CONFIG_PC104=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_SELFTEST is not set CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_GUEST_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set # end of Kernel Performance Events And Counters CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # # Kexec and crash features # CONFIG_CRASH_RESERVE=y CONFIG_VMCORE_INFO=y CONFIG_KEXEC_CORE=y CONFIG_HAVE_IMA_KEXEC=y CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y CONFIG_KEXEC_SIG=y # CONFIG_KEXEC_SIG_FORCE is not set CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y CONFIG_KEXEC_JUMP=y CONFIG_CRASH_DUMP=y CONFIG_CRASH_HOTPLUG=y CONFIG_CRASH_MAX_MEMORY_RANGES=8192 # end of Kexec and crash features # end of General setup CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_MMU=y CONFIG_ARCH_MMAP_RND_BITS_MIN=28 CONFIG_ARCH_MMAP_RND_BITS_MAX=32 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_AUDIT_ARCH=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_DYNAMIC_PHYSICAL_MASK=y CONFIG_PGTABLE_LEVELS=5 CONFIG_CC_HAS_SANE_STACKPROTECTOR=y # # Processor type and features # CONFIG_SMP=y CONFIG_X86_X2APIC=y # CONFIG_X86_POSTED_MSI is not set CONFIG_X86_MPPARSE=y CONFIG_X86_CPU_RESCTRL=y # CONFIG_X86_FRED is not set CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_NUMACHIP=y # CONFIG_X86_VSMP is not set CONFIG_X86_UV=y # CONFIG_X86_GOLDFISH is not set # CONFIG_X86_INTEL_MID is not set CONFIG_X86_INTEL_LPSS=y CONFIG_X86_AMD_PLATFORM_DEVICE=y CONFIG_IOSF_MBI=y CONFIG_IOSF_MBI_DEBUG=y CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y CONFIG_PARAVIRT_XXL=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_PARAVIRT_SPINLOCKS=y CONFIG_X86_HV_CALLBACK_VECTOR=y CONFIG_XEN=y CONFIG_XEN_PV=y CONFIG_XEN_512GB=y CONFIG_XEN_PV_SMP=y CONFIG_XEN_PV_DOM0=y CONFIG_XEN_PVHVM=y CONFIG_XEN_PVHVM_SMP=y CONFIG_XEN_PVHVM_GUEST=y CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_PVH=y CONFIG_XEN_DOM0=y CONFIG_XEN_PV_MSR_SAFE=y CONFIG_KVM_GUEST=y CONFIG_ARCH_CPUIDLE_HALTPOLL=y CONFIG_PVH=y # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set CONFIG_PARAVIRT_CLOCK=y CONFIG_JAILHOUSE_GUEST=y CONFIG_ACRN_GUEST=y CONFIG_INTEL_TDX_GUEST=y # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_HAVE_PAE=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_IA32_FEAT_CTL=y CONFIG_X86_VMX_FEATURE_NAMES=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_HYGON=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_CPU_SUP_ZHAOXIN=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_BOOT_VESA_SUPPORT=y CONFIG_MAXSMP=y CONFIG_NR_CPUS_RANGE_BEGIN=8192 CONFIG_NR_CPUS_RANGE_END=8192 CONFIG_NR_CPUS_DEFAULT=8192 CONFIG_NR_CPUS=8192 CONFIG_SCHED_CLUSTER=y CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y CONFIG_SCHED_MC_PRIO=y CONFIG_X86_LOCAL_APIC=y CONFIG_ACPI_MADT_WAKEUP=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCELOG_LEGACY=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set # # Performance monitoring # CONFIG_PERF_EVENTS_INTEL_UNCORE=y CONFIG_PERF_EVENTS_INTEL_RAPL=m # CONFIG_PERF_EVENTS_INTEL_CSTATE is not set # CONFIG_PERF_EVENTS_AMD_POWER is not set # CONFIG_PERF_EVENTS_AMD_UNCORE is not set CONFIG_PERF_EVENTS_AMD_BRS=y # end of Performance monitoring CONFIG_X86_16BIT=y CONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y CONFIG_X86_IOPL_IOPERM=y CONFIG_MICROCODE=y # CONFIG_MICROCODE_LATE_LOADING is not set CONFIG_X86_MSR=m # CONFIG_X86_CPUID is not set CONFIG_X86_5LEVEL=y CONFIG_X86_DIRECT_GBPAGES=y # CONFIG_X86_CPA_STATISTICS is not set CONFIG_X86_MEM_ENCRYPT=y CONFIG_AMD_MEM_ENCRYPT=y CONFIG_NUMA=y CONFIG_AMD_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SHIFT=10 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=y CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_X86_UMIP=y CONFIG_CC_HAS_IBT=y CONFIG_X86_CET=y # CONFIG_X86_KERNEL_IBT is not set CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_ARCH_PKEY_BITS=4 CONFIG_X86_INTEL_TSX_MODE_OFF=y # CONFIG_X86_INTEL_TSX_MODE_ON is not set # CONFIG_X86_INTEL_TSX_MODE_AUTO is not set CONFIG_X86_SGX=y CONFIG_X86_USER_SHADOW_STACK=y CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_EFI_HANDOVER_PROTOCOL=y CONFIG_EFI_MIXED=y CONFIG_EFI_RUNTIME_MAP=y # CONFIG_HZ_100 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 CONFIG_SCHED_HRTICK=y CONFIG_ARCH_SUPPORTS_KEXEC=y CONFIG_ARCH_SUPPORTS_KEXEC_FILE=y CONFIG_ARCH_SELECTS_KEXEC_FILE=y CONFIG_ARCH_SUPPORTS_KEXEC_PURGATORY=y CONFIG_ARCH_SUPPORTS_KEXEC_SIG=y CONFIG_ARCH_SUPPORTS_KEXEC_SIG_FORCE=y CONFIG_ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG=y CONFIG_ARCH_SUPPORTS_KEXEC_JUMP=y CONFIG_ARCH_SUPPORTS_CRASH_DUMP=y CONFIG_ARCH_DEFAULT_CRASH_DUMP=y CONFIG_ARCH_SUPPORTS_CRASH_HOTPLUG=y CONFIG_ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_RANDOMIZE_BASE=y CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x200000 CONFIG_DYNAMIC_MEMORY_LAYOUT=y CONFIG_RANDOMIZE_MEMORY=y CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y # CONFIG_COMPAT_VDSO is not set CONFIG_LEGACY_VSYSCALL_XONLY=y # CONFIG_LEGACY_VSYSCALL_NONE is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y # CONFIG_STRICT_SIGALTSTACK_SIZE is not set CONFIG_HAVE_LIVEPATCH=y CONFIG_LIVEPATCH=y CONFIG_X86_BUS_LOCK_DETECT=y # end of Processor type and features CONFIG_CC_HAS_NAMED_AS=y CONFIG_USE_X86_SEG_SUPPORT=y CONFIG_CC_HAS_SLS=y CONFIG_CC_HAS_RETURN_THUNK=y CONFIG_CC_HAS_ENTRY_PADDING=y CONFIG_FUNCTION_PADDING_CFI=11 CONFIG_FUNCTION_PADDING_BYTES=16 CONFIG_CALL_PADDING=y CONFIG_HAVE_CALL_THUNKS=y CONFIG_CALL_THUNKS=y CONFIG_PREFIX_SYMBOLS=y CONFIG_CPU_MITIGATIONS=y CONFIG_MITIGATION_PAGE_TABLE_ISOLATION=y CONFIG_MITIGATION_RETPOLINE=y CONFIG_MITIGATION_RETHUNK=y CONFIG_MITIGATION_UNRET_ENTRY=y CONFIG_MITIGATION_CALL_DEPTH_TRACKING=y # CONFIG_CALL_THUNKS_DEBUG is not set CONFIG_MITIGATION_IBPB_ENTRY=y CONFIG_MITIGATION_IBRS_ENTRY=y CONFIG_MITIGATION_SRSO=y # CONFIG_MITIGATION_SLS is not set CONFIG_MITIGATION_GDS=y CONFIG_MITIGATION_RFDS=y CONFIG_MITIGATION_SPECTRE_BHI=y CONFIG_MITIGATION_MDS=y CONFIG_MITIGATION_TAA=y CONFIG_MITIGATION_MMIO_STALE_DATA=y CONFIG_MITIGATION_L1TF=y CONFIG_MITIGATION_RETBLEED=y CONFIG_MITIGATION_SPECTRE_V1=y CONFIG_MITIGATION_SPECTRE_V2=y CONFIG_MITIGATION_SRBDS=y CONFIG_MITIGATION_SSB=y CONFIG_ARCH_HAS_ADD_PAGES=y # # Power management and ACPI options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_SUSPEND_SKIP_SYNC is not set CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_HIBERNATION_SNAPSHOT_DEV=y CONFIG_HIBERNATION_COMP_LZO=y CONFIG_HIBERNATION_DEF_COMP="lzo" CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_USERSPACE_AUTOSLEEP is not set CONFIG_PM_WAKELOCKS=y CONFIG_PM_WAKELOCKS_LIMIT=100 CONFIG_PM_WAKELOCKS_GC=y CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_ADVANCED_DEBUG=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_PM_SLEEP_DEBUG=y # CONFIG_DPM_WATCHDOG is not set CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y CONFIG_PM_CLK=y CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y CONFIG_ENERGY_MODEL=y CONFIG_ARCH_SUPPORTS_ACPI=y CONFIG_ACPI=y CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y CONFIG_ACPI_THERMAL_LIB=y CONFIG_ACPI_DEBUGGER=y CONFIG_ACPI_DEBUGGER_USER=y CONFIG_ACPI_SPCR_TABLE=y CONFIG_ACPI_FPDT=y CONFIG_ACPI_LPIT=y CONFIG_ACPI_SLEEP=y CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y CONFIG_ACPI_EC=y # CONFIG_ACPI_EC_DEBUGFS is not set CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_TAD is not set CONFIG_ACPI_DOCK=y CONFIG_ACPI_CPU_FREQ_PSS=y CONFIG_ACPI_PROCESSOR_CSTATE=y CONFIG_ACPI_PROCESSOR_IDLE=y CONFIG_ACPI_CPPC_LIB=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=y CONFIG_ACPI_CUSTOM_DSDT_FILE="" CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_TABLE_UPGRADE=y CONFIG_ACPI_DEBUG=y CONFIG_ACPI_PCI_SLOT=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_HOTPLUG_MEMORY=y CONFIG_ACPI_HOTPLUG_IOAPIC=y # CONFIG_ACPI_SBS is not set CONFIG_ACPI_HED=y CONFIG_ACPI_BGRT=y # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set CONFIG_ACPI_NFIT=m # CONFIG_NFIT_SECURITY_DEBUG is not set CONFIG_ACPI_NUMA=y CONFIG_ACPI_HMAT=y CONFIG_HAVE_ACPI_APEI=y CONFIG_HAVE_ACPI_APEI_NMI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y # CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set CONFIG_ACPI_DPTF=y # CONFIG_DPTF_POWER is not set # CONFIG_DPTF_PCH_FIVR is not set # CONFIG_ACPI_EXTLOG is not set CONFIG_ACPI_ADXL=y # CONFIG_ACPI_CONFIGFS is not set # CONFIG_ACPI_PFRUT is not set CONFIG_ACPI_PCC=y CONFIG_ACPI_FFH=y CONFIG_PMIC_OPREGION=y CONFIG_BYTCRC_PMIC_OPREGION=y CONFIG_CHTCRC_PMIC_OPREGION=y CONFIG_CHT_WC_PMIC_OPREGION=y CONFIG_ACPI_VIOT=y CONFIG_ACPI_PRMT=y CONFIG_X86_PM_TIMER=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y # # CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y CONFIG_X86_PCC_CPUFREQ=y CONFIG_X86_AMD_PSTATE=y CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3 # CONFIG_X86_AMD_PSTATE_UT is not set CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set CONFIG_X86_SPEEDSTEP_CENTRINO=y # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # end of CPU Frequency scaling # # CPU Idle # CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_CPU_IDLE_GOV_TEO=y CONFIG_CPU_IDLE_GOV_HALTPOLL=y # CONFIG_HALTPOLL_CPUIDLE is not set # end of CPU Idle CONFIG_INTEL_IDLE=y # end of Power management and ACPI options # # Bus options (PCI etc.) # CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y CONFIG_MMCONF_FAM10H=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_ISA_BUS=y CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # end of Bus options (PCI etc.) # # Binary Emulations # CONFIG_IA32_EMULATION=y # CONFIG_IA32_EMULATION_DEFAULT_DISABLED is not set # CONFIG_X86_X32_ABI is not set CONFIG_COMPAT_32=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y # end of Binary Emulations CONFIG_KVM_COMMON=y CONFIG_HAVE_KVM_PFNCACHE=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_DIRTY_RING=y CONFIG_HAVE_KVM_DIRTY_RING_TSO=y CONFIG_HAVE_KVM_DIRTY_RING_ACQ_REL=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_READONLY_MEM=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_KVM_VFIO=y CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y CONFIG_KVM_GENERIC_PRE_FAULT_MEMORY=y CONFIG_KVM_COMPAT=y CONFIG_HAVE_KVM_IRQ_BYPASS=y CONFIG_HAVE_KVM_NO_POLL=y CONFIG_KVM_XFER_TO_GUEST_WORK=y CONFIG_HAVE_KVM_PM_NOTIFIER=y CONFIG_KVM_GENERIC_HARDWARE_ENABLING=y CONFIG_KVM_GENERIC_MMU_NOTIFIER=y CONFIG_KVM_ELIDE_TLB_FLUSH_IF_YOUNG=y CONFIG_KVM_GENERIC_MEMORY_ATTRIBUTES=y CONFIG_KVM_PRIVATE_MEM=y CONFIG_KVM_GENERIC_PRIVATE_MEM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM_X86=m CONFIG_KVM=m CONFIG_KVM_WERROR=y CONFIG_KVM_SW_PROTECTED_VM=y CONFIG_KVM_INTEL=m # CONFIG_KVM_INTEL_PROVE_VE is not set CONFIG_X86_SGX_KVM=y CONFIG_KVM_AMD=m CONFIG_KVM_SMM=y CONFIG_KVM_HYPERV=y CONFIG_KVM_XEN=y # CONFIG_KVM_PROVE_MMU is not set CONFIG_KVM_MAX_NR_VCPUS=4096 CONFIG_AS_AVX512=y CONFIG_AS_SHA1_NI=y CONFIG_AS_SHA256_NI=y CONFIG_AS_TPAUSE=y CONFIG_AS_GFNI=y CONFIG_AS_VAES=y CONFIG_AS_VPCLMULQDQ=y CONFIG_AS_WRUSS=y CONFIG_ARCH_CONFIGURES_CPU_MITIGATIONS=y CONFIG_ARCH_HAS_DMA_OPS=y # # General architecture-dependent options # CONFIG_HOTPLUG_SMT=y CONFIG_HOTPLUG_CORE_SYNC=y CONFIG_HOTPLUG_CORE_SYNC_DEAD=y CONFIG_HOTPLUG_CORE_SYNC_FULL=y CONFIG_HOTPLUG_SPLIT_STARTUP=y CONFIG_HOTPLUG_PARALLEL=y CONFIG_GENERIC_ENTRY=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y # CONFIG_STATIC_KEYS_SELFTEST is not set # CONFIG_STATIC_CALL_SELFTEST is not set CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y CONFIG_UPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_KRETPROBE_ON_RETHOOK=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y CONFIG_HAVE_NMI=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_ARCH_HAS_FORTIFY_SOURCE=y CONFIG_ARCH_HAS_SET_MEMORY=y CONFIG_ARCH_HAS_SET_DIRECT_MAP=y CONFIG_ARCH_HAS_CPU_FINALIZE_INIT=y CONFIG_ARCH_HAS_CPU_PASID=y CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y CONFIG_ARCH_WANTS_NO_INSTR=y CONFIG_HAVE_ASM_MODVERSIONS=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_RSEQ=y CONFIG_HAVE_RUST=y CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y CONFIG_MMU_GATHER_TABLE_FREE=y CONFIG_MMU_GATHER_RCU_TABLE_FREE=y CONFIG_MMU_GATHER_MERGE_VMAS=y CONFIG_MMU_LAZY_TLB_REFCOUNT=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_ARCH_HAVE_EXTRA_ELF_NOTES=y CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP=y CONFIG_SECCOMP_FILTER=y # CONFIG_SECCOMP_CACHE_DEBUG is not set CONFIG_HAVE_ARCH_STACKLEAK=y CONFIG_HAVE_STACKPROTECTOR=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG=y CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y CONFIG_LTO_NONE=y CONFIG_ARCH_SUPPORTS_AUTOFDO_CLANG=y CONFIG_ARCH_SUPPORTS_PROPELLER_CLANG=y CONFIG_ARCH_SUPPORTS_CFI_CLANG=y CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y CONFIG_HAVE_CONTEXT_TRACKING_USER=y CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_MOVE_PUD=y CONFIG_HAVE_MOVE_PMD=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y CONFIG_HAVE_ARCH_HUGE_VMAP=y CONFIG_HAVE_ARCH_HUGE_VMALLOC=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_PMD_MKWRITE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_HAVE_MOD_ARCH_SPECIFIC=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_ARCH_HAS_EXECMEM_ROX=y CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_ARCH_HAS_ELF_RANDOMIZE=y CONFIG_HAVE_ARCH_MMAP_RND_BITS=y CONFIG_HAVE_EXIT_THREAD=y CONFIG_ARCH_MMAP_RND_BITS=32 CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y CONFIG_ARCH_MMAP_RND_COMPAT_BITS=16 CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y CONFIG_HAVE_PAGE_SIZE_4KB=y CONFIG_PAGE_SIZE_4KB=y CONFIG_PAGE_SIZE_LESS_THAN_64KB=y CONFIG_PAGE_SIZE_LESS_THAN_256KB=y CONFIG_PAGE_SHIFT=12 CONFIG_HAVE_OBJTOOL=y CONFIG_HAVE_JUMP_LABEL_HACK=y CONFIG_HAVE_NOINSTR_HACK=y CONFIG_HAVE_NOINSTR_VALIDATION=y CONFIG_HAVE_UACCESS_VALIDATION=y CONFIG_HAVE_STACK_VALIDATION=y CONFIG_HAVE_RELIABLE_STACKTRACE=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y CONFIG_COMPAT_32BIT_TIME=y CONFIG_ARCH_SUPPORTS_RT=y CONFIG_HAVE_ARCH_VMAP_STACK=y CONFIG_VMAP_STACK=y CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET=y CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y CONFIG_STRICT_KERNEL_RWX=y CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y CONFIG_STRICT_MODULE_RWX=y CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y CONFIG_ARCH_USE_MEMREMAP_PROT=y # CONFIG_LOCK_EVENT_COUNTS is not set CONFIG_ARCH_HAS_MEM_ENCRYPT=y CONFIG_ARCH_HAS_CC_PLATFORM=y CONFIG_HAVE_STATIC_CALL=y CONFIG_HAVE_STATIC_CALL_INLINE=y CONFIG_HAVE_PREEMPT_DYNAMIC=y CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y CONFIG_ARCH_HAS_ELFCORE_COMPAT=y CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y CONFIG_DYNAMIC_SIGFRAME=y CONFIG_HAVE_ARCH_NODE_DEV_GROUP=y CONFIG_ARCH_HAS_HW_PTE_YOUNG=y CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y CONFIG_ARCH_HAS_KERNEL_FPU_SUPPORT=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y # end of GCOV-based kernel profiling CONFIG_HAVE_GCC_PLUGINS=y CONFIG_FUNCTION_ALIGNMENT_4B=y CONFIG_FUNCTION_ALIGNMENT_16B=y CONFIG_FUNCTION_ALIGNMENT=16 # end of General architecture-dependent options CONFIG_RT_MUTEXES=y CONFIG_MODULE_SIG_FORMAT=y CONFIG_MODULES=y # CONFIG_MODULE_DEBUG is not set # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set CONFIG_MODVERSIONS=y CONFIG_ASM_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y # CONFIG_MODULE_SIG_SHA1 is not set # CONFIG_MODULE_SIG_SHA256 is not set # CONFIG_MODULE_SIG_SHA384 is not set CONFIG_MODULE_SIG_SHA512=y # CONFIG_MODULE_SIG_SHA3_256 is not set # CONFIG_MODULE_SIG_SHA3_384 is not set # CONFIG_MODULE_SIG_SHA3_512 is not set CONFIG_MODULE_SIG_HASH="sha512" # CONFIG_MODULE_COMPRESS is not set # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set CONFIG_MODPROBE_PATH="/sbin/modprobe" # CONFIG_TRIM_UNUSED_KSYMS is not set CONFIG_MODULES_TREE_LOOKUP=y CONFIG_BLOCK=y CONFIG_BLOCK_LEGACY_AUTOLOAD=y CONFIG_BLK_RQ_ALLOC_TIME=y CONFIG_BLK_CGROUP_RWSTAT=y CONFIG_BLK_CGROUP_PUNT_BIO=y CONFIG_BLK_DEV_BSG_COMMON=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_WRITE_MOUNTED=y CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_BLK_WBT=y CONFIG_BLK_WBT_MQ=y # CONFIG_BLK_CGROUP_IOLATENCY is not set CONFIG_BLK_CGROUP_IOCOST=y CONFIG_BLK_CGROUP_IOPRIO=y CONFIG_BLK_DEBUG_FS=y CONFIG_BLK_SED_OPAL=y CONFIG_BLK_INLINE_ENCRYPTION=y CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_AIX_PARTITION=y CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y CONFIG_CMDLINE_PARTITION=y # end of Partition Types CONFIG_BLK_MQ_PCI=y CONFIG_BLK_MQ_VIRTIO=y CONFIG_BLK_PM=y CONFIG_BLOCK_HOLDER_DEPRECATED=y CONFIG_BLK_MQ_STACKING=y # # IO Schedulers # CONFIG_MQ_IOSCHED_DEADLINE=y # CONFIG_MQ_IOSCHED_KYBER is not set # CONFIG_IOSCHED_BFQ is not set # end of IO Schedulers CONFIG_PREEMPT_NOTIFIERS=y CONFIG_PADATA=y CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y CONFIG_MUTEX_SPIN_ON_OWNER=y CONFIG_RWSEM_SPIN_ON_OWNER=y CONFIG_LOCK_SPIN_ON_OWNER=y CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y CONFIG_QUEUED_SPINLOCKS=y CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y CONFIG_FREEZER=y # # Executable file formats # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_ELF_KUNIT_TEST is not set CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ELFCORE=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_BINFMT_SCRIPT=y CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y # CONFIG_EXEC_KUNIT_TEST is not set # end of Executable file formats # # Memory Management options # CONFIG_ZPOOL=y CONFIG_SWAP=y CONFIG_ZSWAP=y # CONFIG_ZSWAP_DEFAULT_ON is not set CONFIG_ZSWAP_SHRINKER_DEFAULT_ON=y # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set # CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y # CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD_DEPRECATED is not set # CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" CONFIG_ZBUD=y # CONFIG_Z3FOLD_DEPRECATED is not set CONFIG_ZSMALLOC=y # CONFIG_ZSMALLOC_STAT is not set CONFIG_ZSMALLOC_CHAIN_SIZE=8 # # Slab allocator options # CONFIG_SLUB=y # CONFIG_SLUB_TINY is not set CONFIG_SLAB_MERGE_DEFAULT=y CONFIG_SLAB_FREELIST_RANDOM=y CONFIG_SLAB_FREELIST_HARDENED=y CONFIG_SLAB_BUCKETS=y # CONFIG_SLUB_STATS is not set CONFIG_SLUB_CPU_PARTIAL=y CONFIG_RANDOM_KMALLOC_CACHES=y # end of Slab allocator options CONFIG_SHUFFLE_PAGE_ALLOCATOR=y # CONFIG_COMPAT_BRK is not set CONFIG_SPARSEMEM=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_ARCH_WANT_OPTIMIZE_DAX_VMEMMAP=y CONFIG_ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP=y CONFIG_HAVE_GUP_FAST=y CONFIG_NUMA_KEEP_MEMINFO=y CONFIG_MEMORY_ISOLATION=y CONFIG_EXCLUSIVE_SYSTEM_RAM=y CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MHP_DEFAULT_ONLINE_TYPE_OFFLINE=y # CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_AUTO is not set # CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_KERNEL is not set # CONFIG_MHP_DEFAULT_ONLINE_TYPE_ONLINE_MOVABLE is not set CONFIG_MEMORY_HOTREMOVE=y CONFIG_MHP_MEMMAP_ON_MEMORY=y CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y CONFIG_SPLIT_PTE_PTLOCKS=y CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y CONFIG_SPLIT_PMD_PTLOCKS=y CONFIG_MEMORY_BALLOON=y CONFIG_BALLOON_COMPACTION=y CONFIG_COMPACTION=y CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 CONFIG_PAGE_REPORTING=y CONFIG_MIGRATION=y CONFIG_DEVICE_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_ARCH_ENABLE_THP_MIGRATION=y CONFIG_CONTIG_ALLOC=y CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y # CONFIG_HWPOISON_INJECT is not set CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ARCH_WANTS_THP_SWAP=y CONFIG_TRANSPARENT_HUGEPAGE=y # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y # CONFIG_TRANSPARENT_HUGEPAGE_NEVER is not set CONFIG_THP_SWAP=y # CONFIG_READ_ONLY_THP_FOR_FS is not set CONFIG_PGTABLE_HAS_HUGE_LEAVES=y CONFIG_ARCH_SUPPORTS_HUGE_PFNMAP=y CONFIG_ARCH_SUPPORTS_PMD_PFNMAP=y CONFIG_ARCH_SUPPORTS_PUD_PFNMAP=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y # CONFIG_CMA is not set CONFIG_MEM_SOFT_DIRTY=y CONFIG_GENERIC_EARLY_IOREMAP=y # CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set CONFIG_PAGE_IDLE_FLAG=y CONFIG_IDLE_PAGE_TRACKING=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y CONFIG_ARCH_HAS_PTE_DEVMAP=y CONFIG_ARCH_HAS_ZONE_DMA_SET=y CONFIG_ZONE_DMA=y CONFIG_ZONE_DMA32=y CONFIG_ZONE_DEVICE=y CONFIG_GET_FREE_REGION=y CONFIG_DEVICE_PRIVATE=y CONFIG_VMAP_PFN=y CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y CONFIG_ARCH_HAS_PKEYS=y CONFIG_ARCH_USES_PG_ARCH_2=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_PERCPU_STATS is not set # CONFIG_GUP_TEST is not set # CONFIG_DMAPOOL_TEST is not set CONFIG_ARCH_HAS_PTE_SPECIAL=y CONFIG_MEMFD_CREATE=y CONFIG_SECRETMEM=y CONFIG_ANON_VMA_NAME=y CONFIG_HAVE_ARCH_USERFAULTFD_WP=y CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y CONFIG_USERFAULTFD=y CONFIG_PTE_MARKER_UFFD_WP=y CONFIG_LRU_GEN=y CONFIG_LRU_GEN_ENABLED=y # CONFIG_LRU_GEN_STATS is not set CONFIG_LRU_GEN_WALKS_MMU=y CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y CONFIG_PER_VMA_LOCK=y CONFIG_LOCK_MM_AND_FIND_VMA=y CONFIG_IOMMU_MM_DATA=y CONFIG_EXECMEM=y CONFIG_NUMA_MEMBLKS=y CONFIG_NUMA_EMU=y CONFIG_ARCH_HAS_USER_SHADOW_STACK=y CONFIG_ARCH_SUPPORTS_PT_RECLAIM=y CONFIG_PT_RECLAIM=y # # Data Access Monitoring # # CONFIG_DAMON is not set # end of Data Access Monitoring # end of Memory Management options CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y CONFIG_NET_INGRESS=y CONFIG_NET_EGRESS=y CONFIG_NET_XGRESS=y CONFIG_SKB_EXTENSIONS=y CONFIG_NET_DEVMEM=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y CONFIG_AF_UNIX_OOB=y # CONFIG_UNIX_DIAG is not set # CONFIG_TLS is not set # CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_XDP_SOCKETS=y # CONFIG_XDP_SOCKETS_DIAG is not set # CONFIG_NET_HANDSHAKE_KUNIT_TEST is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set CONFIG_IP_MROUTE_COMMON=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y CONFIG_SYN_COOKIES=y # CONFIG_NET_IPVTI is not set # CONFIG_NET_FOU is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set CONFIG_INET_TABLE_PERTURB_ORDER=16 # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y # CONFIG_TCP_CONG_WESTWOOD is not set # CONFIG_TCP_CONG_HTCP is not set # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_NV is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set # CONFIG_TCP_CONG_DCTCP is not set # CONFIG_TCP_CONG_CDG is not set # CONFIG_TCP_CONG_BBR is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_SIGPOOL=y CONFIG_TCP_AO=y CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_IPV6_ILA is not set # CONFIG_IPV6_VTI is not set # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y CONFIG_IPV6_SEG6_LWTUNNEL=y CONFIG_IPV6_SEG6_HMAC=y CONFIG_IPV6_SEG6_BPF=y # CONFIG_IPV6_RPL_LWTUNNEL is not set CONFIG_IPV6_IOAM6_LWTUNNEL=y CONFIG_NETLABEL=y CONFIG_MPTCP=y CONFIG_MPTCP_IPV6=y # CONFIG_MPTCP_KUNIT_TEST is not set CONFIG_NETWORK_SECMARK=y CONFIG_NET_PTP_CLASSIFY=y CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_NETFILTER=y CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # CONFIG_NETFILTER_INGRESS=y CONFIG_NETFILTER_EGRESS=y CONFIG_NETFILTER_SKIP_EGRESS=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_FAMILY_ARP=y CONFIG_NETFILTER_BPF_LINK=y CONFIG_NETFILTER_NETLINK_HOOK=m # CONFIG_NETFILTER_NETLINK_ACCT is not set # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NETFILTER_NETLINK_OSF is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NF_LOG_SYSLOG is not set CONFIG_NF_TABLES=m CONFIG_NF_TABLES_INET=y CONFIG_NF_TABLES_NETDEV=y # CONFIG_NFT_NUMGEN is not set # CONFIG_NFT_LOG is not set # CONFIG_NFT_LIMIT is not set # CONFIG_NFT_TUNNEL is not set # CONFIG_NFT_QUOTA is not set # CONFIG_NFT_REJECT is not set # CONFIG_NFT_COMPAT is not set # CONFIG_NFT_HASH is not set # CONFIG_NFT_SOCKET is not set # CONFIG_NFT_OSF is not set # CONFIG_NFT_TPROXY is not set # CONFIG_NF_DUP_NETDEV is not set # CONFIG_NFT_DUP_NETDEV is not set # CONFIG_NFT_FWD_NETDEV is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XTABLES_COMPAT=y # # Xtables combined modules # # CONFIG_NETFILTER_XT_MARK is not set # # Xtables targets # # CONFIG_NETFILTER_XT_TARGET_AUDIT is not set # CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set # CONFIG_NETFILTER_XT_TARGET_HMARK is not set # CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set # CONFIG_NETFILTER_XT_TARGET_LED is not set # CONFIG_NETFILTER_XT_TARGET_LOG is not set # CONFIG_NETFILTER_XT_TARGET_MARK is not set # CONFIG_NETFILTER_XT_TARGET_NFLOG is not set # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # # Xtables matches # # CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set # CONFIG_NETFILTER_XT_MATCH_BPF is not set # CONFIG_NETFILTER_XT_MATCH_CGROUP is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CPU is not set # CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ECN is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HL is not set # CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_L2TP is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_NFACCT is not set # CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set # CONFIG_NETFILTER_XT_MATCH_SOCKET is not set # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # end of Core Netfilter Configuration # CONFIG_IP_SET is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_IPTABLES_LEGACY=m # CONFIG_NF_SOCKET_IPV4 is not set # CONFIG_NF_TPROXY_IPV4 is not set CONFIG_NF_TABLES_IPV4=y # CONFIG_NFT_DUP_IPV4 is not set # CONFIG_NFT_FIB_IPV4 is not set CONFIG_NF_TABLES_ARP=y # CONFIG_NF_DUP_IPV4 is not set # CONFIG_NF_LOG_ARP is not set # CONFIG_NF_LOG_IPV4 is not set # CONFIG_NF_REJECT_IPV4 is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_NF_ARPFILTER is not set # end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # # CONFIG_IP6_NF_IPTABLES_LEGACY is not set # CONFIG_NF_SOCKET_IPV6 is not set # CONFIG_NF_TPROXY_IPV6 is not set CONFIG_NF_TABLES_IPV6=y # CONFIG_NFT_DUP_IPV6 is not set # CONFIG_NFT_FIB_IPV6 is not set # CONFIG_NF_DUP_IPV6 is not set # CONFIG_NF_REJECT_IPV6 is not set # CONFIG_NF_LOG_IPV6 is not set # CONFIG_IP6_NF_IPTABLES is not set # end of IPv6: Netfilter Configuration # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC2 is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_6LOWPAN is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFB is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_CBS is not set # CONFIG_NET_SCH_ETF is not set # CONFIG_NET_SCH_TAPRIO is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_MQPRIO is not set # CONFIG_NET_SCH_SKBPRIO is not set # CONFIG_NET_SCH_CHOKE is not set # CONFIG_NET_SCH_QFQ is not set # CONFIG_NET_SCH_CODEL is not set CONFIG_NET_SCH_FQ_CODEL=m # CONFIG_NET_SCH_CAKE is not set # CONFIG_NET_SCH_FQ is not set # CONFIG_NET_SCH_HHF is not set # CONFIG_NET_SCH_PIE is not set # CONFIG_NET_SCH_INGRESS is not set # CONFIG_NET_SCH_PLUG is not set # CONFIG_NET_SCH_ETS is not set # CONFIG_NET_SCH_DEFAULT is not set # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_ROUTE4 is not set # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_CLS_CGROUP is not set # CONFIG_NET_CLS_BPF is not set # CONFIG_NET_CLS_FLOWER is not set # CONFIG_NET_CLS_MATCHALL is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 # CONFIG_NET_EMATCH_CMP is not set # CONFIG_NET_EMATCH_NBYTE is not set # CONFIG_NET_EMATCH_U32 is not set # CONFIG_NET_EMATCH_META is not set # CONFIG_NET_EMATCH_TEXT is not set # CONFIG_NET_EMATCH_IPT is not set CONFIG_NET_CLS_ACT=y # CONFIG_NET_ACT_POLICE is not set # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_SAMPLE is not set # CONFIG_NET_ACT_NAT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_ACT_CSUM is not set # CONFIG_NET_ACT_MPLS is not set # CONFIG_NET_ACT_VLAN is not set # CONFIG_NET_ACT_BPF is not set # CONFIG_NET_ACT_SKBMOD is not set # CONFIG_NET_ACT_IFE is not set # CONFIG_NET_ACT_TUNNEL_KEY is not set # CONFIG_NET_ACT_GATE is not set CONFIG_NET_TC_SKB_EXT=y CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set CONFIG_VSOCKETS=m # CONFIG_VSOCKETS_DIAG is not set CONFIG_VSOCKETS_LOOPBACK=m CONFIG_VMWARE_VMCI_VSOCKETS=m # CONFIG_VIRTIO_VSOCKETS is not set CONFIG_VIRTIO_VSOCKETS_COMMON=m # CONFIG_NETLINK_DIAG is not set CONFIG_MPLS=y # CONFIG_NET_MPLS_GSO is not set # CONFIG_MPLS_ROUTING is not set # CONFIG_NET_NSH is not set # CONFIG_HSR is not set CONFIG_NET_SWITCHDEV=y CONFIG_NET_L3_MASTER_DEV=y CONFIG_QRTR=m # CONFIG_QRTR_TUN is not set CONFIG_NET_NCSI=y CONFIG_NCSI_OEM_CMD_GET_MAC=y # CONFIG_NCSI_OEM_CMD_KEEP_PHY is not set CONFIG_PCPU_DEV_REFCNT=y CONFIG_MAX_SKB_FRAGS=17 CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_SOCK_RX_QUEUE_MAPPING=y CONFIG_XPS=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y # # Packet Radio protocols # # CONFIG_AX25 is not set # CONFIG_CAN is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_AF_KCM is not set CONFIG_STREAM_PARSER=y CONFIG_MCTP=y # CONFIG_MCTP_TEST is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y CONFIG_CFG80211_DEBUGFS=y CONFIG_CFG80211_CRDA_SUPPORT=y CONFIG_CFG80211_WEXT=y # CONFIG_CFG80211_KUNIT_TEST is not set # CONFIG_MAC80211 is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_RFKILL_GPIO is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set # CONFIG_PSAMPLE is not set # CONFIG_NET_IFE is not set CONFIG_LWTUNNEL=y CONFIG_LWTUNNEL_BPF=y CONFIG_DST_CACHE=y CONFIG_NET_SELFTESTS=y CONFIG_NET_SOCK_MSG=y CONFIG_PAGE_POOL=y CONFIG_PAGE_POOL_STATS=y CONFIG_FAILOVER=y CONFIG_ETHTOOL_NETLINK=y # CONFIG_NETDEV_ADDR_LIST_TEST is not set # CONFIG_NET_TEST is not set # # Device Drivers # CONFIG_HAVE_EISA=y CONFIG_EISA=y CONFIG_EISA_VLB_PRIMING=y CONFIG_EISA_PCI_EISA=y CONFIG_EISA_VIRTUAL_ROOT=y CONFIG_EISA_NAMES=y CONFIG_HAVE_PCI=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y # CONFIG_PCIEAER_INJECT is not set # CONFIG_PCIE_ECRC is not set CONFIG_PCIEASPM=y CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_POWER_SUPERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y CONFIG_PCIE_DPC=y CONFIG_PCIE_PTM=y CONFIG_PCIE_EDR=y CONFIG_PCI_MSI=y CONFIG_PCI_QUIRKS=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_REALLOC_ENABLE_AUTO=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_PF_STUB is not set # CONFIG_XEN_PCIDEV_FRONTEND is not set CONFIG_PCI_ATS=y CONFIG_PCI_LOCKLESS_CONFIG=y CONFIG_PCI_IOV=y # CONFIG_PCI_NPEM is not set CONFIG_PCI_PRI=y CONFIG_PCI_PASID=y # CONFIG_PCIE_TPH is not set CONFIG_PCI_P2PDMA=y CONFIG_PCI_LABEL=y # CONFIG_PCIE_BUS_TUNE_OFF is not set CONFIG_PCIE_BUS_DEFAULT=y # CONFIG_PCIE_BUS_SAFE is not set # CONFIG_PCIE_BUS_PERFORMANCE is not set # CONFIG_PCIE_BUS_PEER2PEER is not set CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_HOTPLUG_PCI=y CONFIG_HOTPLUG_PCI_ACPI=y # CONFIG_HOTPLUG_PCI_ACPI_IBM is not set CONFIG_HOTPLUG_PCI_CPCI=y # CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set # CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set # CONFIG_HOTPLUG_PCI_OCTEONEP is not set CONFIG_HOTPLUG_PCI_SHPC=y # # PCI controller drivers # # CONFIG_VMD is not set # # Cadence-based PCIe controllers # # end of Cadence-based PCIe controllers # # DesignWare-based PCIe controllers # CONFIG_PCIE_DW=y CONFIG_PCIE_DW_HOST=y CONFIG_PCIE_DW_EP=y # CONFIG_PCI_MESON is not set CONFIG_PCIE_DW_PLAT=y CONFIG_PCIE_DW_PLAT_HOST=y CONFIG_PCIE_DW_PLAT_EP=y # end of DesignWare-based PCIe controllers # # Mobiveil-based PCIe controllers # # end of Mobiveil-based PCIe controllers # # PLDA-based PCIe controllers # # end of PLDA-based PCIe controllers # end of PCI controller drivers # # PCI Endpoint # CONFIG_PCI_ENDPOINT=y CONFIG_PCI_ENDPOINT_CONFIGFS=y # CONFIG_PCI_EPF_TEST is not set # CONFIG_PCI_EPF_NTB is not set # end of PCI Endpoint # # PCI switch controller drivers # # CONFIG_PCI_SW_SWITCHTEC is not set # end of PCI switch controller drivers # CONFIG_CXL_BUS is not set # CONFIG_PCCARD is not set CONFIG_RAPIDIO=y # CONFIG_RAPIDIO_TSI721 is not set CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set CONFIG_RAPIDIO_DMA_ENGINE=y # CONFIG_RAPIDIO_DEBUG is not set # CONFIG_RAPIDIO_ENUM_BASIC is not set # CONFIG_RAPIDIO_CHMAN is not set # CONFIG_RAPIDIO_MPORT_CDEV is not set # # RapidIO Switch drivers # # CONFIG_RAPIDIO_CPS_XX is not set # CONFIG_RAPIDIO_CPS_GEN2 is not set # CONFIG_RAPIDIO_RXS_GEN3 is not set # end of RapidIO Switch drivers # # Generic Driver Options # CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_DEVTMPFS_SAFE=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # # Firmware loader # CONFIG_FW_LOADER=y CONFIG_FW_LOADER_DEBUG=y CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_FW_LOADER_SYSFS=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set CONFIG_FW_LOADER_COMPRESS=y CONFIG_FW_LOADER_COMPRESS_XZ=y CONFIG_FW_LOADER_COMPRESS_ZSTD=y CONFIG_FW_CACHE=y CONFIG_FW_UPLOAD=y # end of Firmware loader CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set # CONFIG_PM_QOS_KUNIT_TEST is not set CONFIG_HMEM_REPORTING=y # CONFIG_TEST_ASYNC_DRIVER_PROBE is not set # CONFIG_DM_KUNIT_TEST is not set # CONFIG_DRIVER_PE_KUNIT_TEST is not set CONFIG_SYS_HYPERVISOR=y CONFIG_GENERIC_CPU_DEVICES=y CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_REGMAP=y # CONFIG_REGMAP_KUNIT is not set # CONFIG_REGMAP_BUILD is not set CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # CONFIG_DMA_FENCE_TRACE is not set # CONFIG_FW_DEVLINK_SYNC_STATE_TIMEOUT is not set # end of Generic Driver Options # # Bus devices # # CONFIG_MHI_BUS is not set # CONFIG_MHI_BUS_EP is not set # end of Bus devices # # Cache Drivers # # end of Cache Drivers CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # # Firmware Drivers # # # ARM System Control and Management Interface Protocol # # end of ARM System Control and Management Interface Protocol CONFIG_EDD=y CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y CONFIG_DMIID=y CONFIG_DMI_SYSFS=m CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y # CONFIG_ISCSI_IBFT is not set CONFIG_FW_CFG_SYSFS=m # CONFIG_FW_CFG_SYSFS_CMDLINE is not set CONFIG_SYSFB=y CONFIG_SYSFB_SIMPLEFB=y # CONFIG_GOOGLE_FIRMWARE is not set # # EFI (Extensible Firmware Interface) Support # CONFIG_EFI_ESRT=y CONFIG_EFI_VARS_PSTORE=m # CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set CONFIG_EFI_SOFT_RESERVE=y CONFIG_EFI_DXE_MEM_ATTRIBUTES=y CONFIG_EFI_RUNTIME_WRAPPERS=y # CONFIG_EFI_BOOTLOADER_CONTROL is not set # CONFIG_EFI_CAPSULE_LOADER is not set # CONFIG_EFI_TEST is not set CONFIG_EFI_DEV_PATH_PARSER=y CONFIG_APPLE_PROPERTIES=y CONFIG_RESET_ATTACK_MITIGATION=y CONFIG_EFI_RCI2_TABLE=y # CONFIG_EFI_DISABLE_PCI_DMA is not set CONFIG_EFI_EARLYCON=y CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y # CONFIG_EFI_DISABLE_RUNTIME is not set CONFIG_EFI_COCO_SECRET=y CONFIG_UNACCEPTED_MEMORY=y # end of EFI (Extensible Firmware Interface) Support CONFIG_UEFI_CPER=y CONFIG_UEFI_CPER_X86=y # CONFIG_IMX_SCMI_MISC_DRV is not set # # Qualcomm firmware drivers # # end of Qualcomm firmware drivers # # Tegra firmware driver # # end of Tegra firmware driver # end of Firmware Drivers # CONFIG_GNSS is not set # CONFIG_MTD is not set # CONFIG_OF is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y # CONFIG_PARPORT is not set CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_NULL_BLK is not set # CONFIG_BLK_DEV_FD is not set CONFIG_CDROM=y # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_ZRAM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_BACKEND is not set CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_UBLK is not set # # NVME Support # # CONFIG_BLK_DEV_NVME is not set # CONFIG_NVME_FC is not set # CONFIG_NVME_TCP is not set # CONFIG_NVME_TARGET is not set # end of NVME Support # # Misc devices # # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_RPMB is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_SGI_XP is not set # CONFIG_HP_ILO is not set # CONFIG_SGI_GRU is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_LATTICE_ECP3_CONFIG is not set CONFIG_SRAM=y # CONFIG_DW_XDATA_PCIE is not set # CONFIG_PCI_ENDPOINT_TEST is not set # CONFIG_XILINX_SDFEC is not set # CONFIG_NSM is not set # CONFIG_MCHP_LAN966X_PCI is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # CONFIG_EEPROM_IDT_89HPESX is not set # CONFIG_EEPROM_EE1004 is not set # end of EEPROM support # CONFIG_CB710_CORE is not set # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_ALTERA_STAPL is not set # CONFIG_INTEL_MEI is not set CONFIG_VMWARE_VMCI=m # CONFIG_GENWQE is not set # CONFIG_ECHO is not set # CONFIG_BCM_VK is not set # CONFIG_MISC_ALCOR_PCI is not set # CONFIG_MISC_RTSX_PCI is not set # CONFIG_MISC_RTSX_USB is not set # CONFIG_UACCE is not set CONFIG_PVPANIC=y # CONFIG_PVPANIC_MMIO is not set # CONFIG_PVPANIC_PCI is not set # CONFIG_GP_PCI1XXXX is not set # CONFIG_KEBA_CP500 is not set # end of Misc devices # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI_COMMON=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_LIB_KUNIT_TEST is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set CONFIG_BLK_DEV_SR=y CONFIG_CHR_DEV_SG=y CONFIG_BLK_DEV_BSG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # CONFIG_SCSI_PROTO_TEST is not set # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # end of SCSI Transports CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AHA1740 is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_SCSI_ESAS2R is not set CONFIG_MEGARAID_NEWGEN=y # CONFIG_MEGARAID_MM is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPI3MR is not set # CONFIG_SCSI_SMARTPQI is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_MYRB is not set # CONFIG_SCSI_MYRS is not set # CONFIG_VMWARE_PVSCSI is not set # CONFIG_XEN_SCSI_FRONTEND is not set # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FDOMAIN_PCI is not set # CONFIG_SCSI_ISCI is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_SIM710 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_AM53C974 is not set # CONFIG_SCSI_WD719X is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set CONFIG_SCSI_VIRTIO=y CONFIG_SCSI_DH=y # CONFIG_SCSI_DH_RDAC is not set # CONFIG_SCSI_DH_HP_SW is not set # CONFIG_SCSI_DH_EMC is not set # CONFIG_SCSI_DH_ALUA is not set # end of SCSI device support CONFIG_ATA=y CONFIG_SATA_HOST=y CONFIG_PATA_TIMINGS=y CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_FORCE=y CONFIG_ATA_ACPI=y CONFIG_SATA_ZPODD=y CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=m CONFIG_SATA_MOBILE_LPM_POLICY=3 CONFIG_SATA_AHCI_PLATFORM=m CONFIG_AHCI_DWC=m # CONFIG_SATA_INIC162X is not set CONFIG_SATA_ACARD_AHCI=m # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_DWC is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set CONFIG_PATA_SIS=y # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # # CONFIG_PATA_ACPI is not set CONFIG_ATA_GENERIC=y # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y CONFIG_MD_BITMAP_FILE=y CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID10=m CONFIG_MD_RAID456=m # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_UNSTRIPED is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_WRITECACHE is not set # CONFIG_DM_EBS is not set # CONFIG_DM_ERA is not set # CONFIG_DM_CLONE is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set CONFIG_DM_MULTIPATH=m # CONFIG_DM_MULTIPATH_QL is not set # CONFIG_DM_MULTIPATH_ST is not set # CONFIG_DM_MULTIPATH_HST is not set # CONFIG_DM_MULTIPATH_IOA is not set # CONFIG_DM_DELAY is not set # CONFIG_DM_DUST is not set CONFIG_DM_INIT=y CONFIG_DM_UEVENT=y # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_DM_LOG_WRITES is not set # CONFIG_DM_INTEGRITY is not set # CONFIG_DM_ZONED is not set CONFIG_DM_AUDIT=y # CONFIG_DM_VDO is not set # CONFIG_TARGET_CORE is not set CONFIG_FUSION=y # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # end of IEEE 1394 (FireWire) support CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=m CONFIG_NETDEVICES=y CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_WIREGUARD is not set # CONFIG_EQUALIZER is not set CONFIG_NET_FC=y # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_IPVLAN is not set # CONFIG_VXLAN is not set # CONFIG_GENEVE is not set # CONFIG_BAREUDP is not set # CONFIG_GTP is not set # CONFIG_PFCP is not set # CONFIG_AMT is not set # CONFIG_MACSEC is not set # CONFIG_NETCONSOLE is not set # CONFIG_RIONET is not set CONFIG_TUN=y # CONFIG_TUN_VNET_CROSS_LE is not set # CONFIG_VETH is not set CONFIG_VIRTIO_NET=y # CONFIG_NLMON is not set CONFIG_NETKIT=y # CONFIG_NET_VRF is not set # CONFIG_ARCNET is not set CONFIG_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_EL3 is not set # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_VENDOR_ADAPTEC=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_NET_VENDOR_AGERE=y # CONFIG_ET131X is not set CONFIG_NET_VENDOR_ALACRITECH=y # CONFIG_SLICOSS is not set CONFIG_NET_VENDOR_ALTEON=y # CONFIG_ACENIC is not set # CONFIG_ALTERA_TSE is not set CONFIG_NET_VENDOR_AMAZON=y # CONFIG_ENA_ETHERNET is not set CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set # CONFIG_PCNET32 is not set # CONFIG_AMD_XGBE is not set # CONFIG_PDS_CORE is not set CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_AQTION is not set CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_ASIX=y # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_ALX is not set # CONFIG_CX_ECAT is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_BCMGENET is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2X is not set # CONFIG_SYSTEMPORT is not set # CONFIG_BNXT is not set CONFIG_NET_VENDOR_CADENCE=y # CONFIG_MACB is not set CONFIG_NET_VENDOR_CAVIUM=y # CONFIG_THUNDER_NIC_PF is not set # CONFIG_THUNDER_NIC_VF is not set # CONFIG_THUNDER_NIC_BGX is not set # CONFIG_THUNDER_NIC_RGX is not set # CONFIG_CAVIUM_PTP is not set # CONFIG_LIQUIDIO is not set # CONFIG_LIQUIDIO_VF is not set CONFIG_NET_VENDOR_CHELSIO=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_CHELSIO_T4 is not set # CONFIG_CHELSIO_T4VF is not set CONFIG_NET_VENDOR_CIRRUS=y CONFIG_NET_VENDOR_CISCO=y # CONFIG_ENIC is not set CONFIG_NET_VENDOR_CORTINA=y CONFIG_NET_VENDOR_DAVICOM=y # CONFIG_DM9051 is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_DEC=y CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set CONFIG_NET_VENDOR_DLINK=y # CONFIG_DL2K is not set CONFIG_NET_VENDOR_EMULEX=y # CONFIG_BE2NET is not set CONFIG_NET_VENDOR_ENGLEDER=y # CONFIG_TSNEP is not set CONFIG_NET_VENDOR_EZCHIP=y CONFIG_NET_VENDOR_FUNGIBLE=y # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set CONFIG_NET_VENDOR_HISILICON=y # CONFIG_HIBMCGE is not set CONFIG_NET_VENDOR_HUAWEI=y # CONFIG_HINIC is not set CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set # CONFIG_I40E is not set # CONFIG_I40EVF is not set # CONFIG_ICE is not set # CONFIG_FM10K is not set # CONFIG_IGC is not set # CONFIG_IDPF is not set # CONFIG_JME is not set CONFIG_NET_VENDOR_ADI=y # CONFIG_ADIN1110 is not set CONFIG_NET_VENDOR_LITEX=y CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_OCTEON_EP is not set # CONFIG_OCTEON_EP_VF is not set CONFIG_NET_VENDOR_MELLANOX=y # CONFIG_MLX4_EN is not set # CONFIG_MLX5_CORE is not set # CONFIG_MLXSW_CORE is not set # CONFIG_MLXFW is not set CONFIG_NET_VENDOR_META=y # CONFIG_FBNIC is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set # CONFIG_KSZ884X_PCI is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set # CONFIG_ENCX24J600 is not set # CONFIG_LAN743X is not set # CONFIG_LAN865X is not set CONFIG_VCAP=y # CONFIG_VCAP_KUNIT_TEST is not set CONFIG_NET_VENDOR_MICROSEMI=y CONFIG_NET_VENDOR_MICROSOFT=y CONFIG_NET_VENDOR_MYRI=y # CONFIG_MYRI10GE is not set # CONFIG_FEALNX is not set CONFIG_NET_VENDOR_NI=y # CONFIG_NI_XGE_MANAGEMENT_ENET is not set CONFIG_NET_VENDOR_NATSEMI=y # CONFIG_NATSEMI is not set # CONFIG_NS83820 is not set CONFIG_NET_VENDOR_NETERION=y # CONFIG_S2IO is not set CONFIG_NET_VENDOR_NETRONOME=y # CONFIG_NFP is not set CONFIG_NET_VENDOR_8390=y # CONFIG_NE2K_PCI is not set CONFIG_NET_VENDOR_NVIDIA=y # CONFIG_FORCEDETH is not set CONFIG_NET_VENDOR_OKI=y # CONFIG_ETHOC is not set # CONFIG_OA_TC6 is not set CONFIG_NET_VENDOR_PACKET_ENGINES=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_NET_VENDOR_PENSANDO=y # CONFIG_IONIC is not set CONFIG_NET_VENDOR_QLOGIC=y # CONFIG_QLA3XXX is not set # CONFIG_QLCNIC is not set # CONFIG_NETXEN_NIC is not set # CONFIG_QED is not set CONFIG_NET_VENDOR_BROCADE=y # CONFIG_BNA is not set CONFIG_NET_VENDOR_QUALCOMM=y # CONFIG_QCOM_EMAC is not set # CONFIG_RMNET is not set CONFIG_NET_VENDOR_RDC=y # CONFIG_R6040 is not set CONFIG_NET_VENDOR_REALTEK=y # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_R8169 is not set # CONFIG_RTASE is not set CONFIG_NET_VENDOR_RENESAS=y CONFIG_NET_VENDOR_ROCKER=y CONFIG_NET_VENDOR_SAMSUNG=y # CONFIG_SXGBE_ETH is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SILAN=y # CONFIG_SC92031 is not set CONFIG_NET_VENDOR_SIS=y # CONFIG_SIS900 is not set # CONFIG_SIS190 is not set CONFIG_NET_VENDOR_SOLARFLARE=y # CONFIG_SFC is not set # CONFIG_SFC_FALCON is not set # CONFIG_SFC_SIENA is not set CONFIG_NET_VENDOR_SMSC=y # CONFIG_EPIC100 is not set # CONFIG_SMSC911X is not set # CONFIG_SMSC9420 is not set CONFIG_NET_VENDOR_SOCIONEXT=y CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_SUN=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NIU is not set CONFIG_NET_VENDOR_SYNOPSYS=y # CONFIG_DWC_XLGMAC is not set CONFIG_NET_VENDOR_TEHUTI=y # CONFIG_TEHUTI is not set # CONFIG_TEHUTI_TN40 is not set CONFIG_NET_VENDOR_TI=y # CONFIG_TI_CPSW_PHY_SEL is not set # CONFIG_TLAN is not set CONFIG_NET_VENDOR_VERTEXCOM=y # CONFIG_MSE102X is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WANGXUN=y # CONFIG_NGBE is not set # CONFIG_TXGBE is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_NET_VENDOR_XILINX=y # CONFIG_XILINX_EMACLITE is not set # CONFIG_XILINX_LL_TEMAC is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set CONFIG_PHYLIB=y CONFIG_SWPHY=y CONFIG_LED_TRIGGER_PHY=y CONFIG_FIXED_PHY=y # # MII PHY device drivers # # CONFIG_AIR_EN8811H_PHY is not set # CONFIG_AMD_PHY is not set # CONFIG_ADIN_PHY is not set # CONFIG_ADIN1100_PHY is not set # CONFIG_AQUANTIA_PHY is not set # CONFIG_AX88796B_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM54140_PHY is not set # CONFIG_BCM7XXX_PHY is not set CONFIG_BCM84881_PHY=y # CONFIG_BCM87XX_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_CORTINA_PHY is not set # CONFIG_DAVICOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_INTEL_XWAY_PHY is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MARVELL_PHY is not set # CONFIG_MARVELL_10G_PHY is not set # CONFIG_MARVELL_88Q2XXX_PHY is not set # CONFIG_MARVELL_88X2222_PHY is not set # CONFIG_MAXLINEAR_GPHY is not set # CONFIG_MEDIATEK_GE_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_MICROCHIP_T1S_PHY is not set # CONFIG_MICROCHIP_PHY is not set # CONFIG_MICROCHIP_T1_PHY is not set # CONFIG_MICROSEMI_PHY is not set # CONFIG_MOTORCOMM_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_NXP_CBTX_PHY is not set # CONFIG_NXP_C45_TJA11XX_PHY is not set # CONFIG_NXP_TJA11XX_PHY is not set # CONFIG_NCN26000_PHY is not set # CONFIG_AT803X_PHY is not set # CONFIG_QCA83XX_PHY is not set # CONFIG_QCA808X_PHY is not set # CONFIG_QSEMI_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_RENESAS_PHY is not set # CONFIG_ROCKCHIP_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_STE10XP is not set # CONFIG_TERANETICS_PHY is not set # CONFIG_DP83822_PHY is not set # CONFIG_DP83TC811_PHY is not set # CONFIG_DP83848_PHY is not set # CONFIG_DP83867_PHY is not set # CONFIG_DP83869_PHY is not set # CONFIG_DP83TD510_PHY is not set # CONFIG_DP83TG720_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_XILINX_GMII2RGMII is not set # CONFIG_MICREL_KS8995MA is not set CONFIG_PSE_CONTROLLER=y # CONFIG_PSE_REGULATOR is not set # CONFIG_PSE_PD692X0 is not set # CONFIG_PSE_TPS23881 is not set # # MCTP Device Drivers # # CONFIG_MCTP_SERIAL is not set # end of MCTP Device Drivers CONFIG_MDIO_DEVICE=y CONFIG_MDIO_BUS=y CONFIG_FWNODE_MDIO=y CONFIG_ACPI_MDIO=y CONFIG_MDIO_DEVRES=y # CONFIG_MDIO_BITBANG is not set # CONFIG_MDIO_BCM_UNIMAC is not set # CONFIG_MDIO_MVUSB is not set # CONFIG_MDIO_MSCC_MIIM is not set # CONFIG_MDIO_THUNDER is not set # # MDIO Multiplexers # # # PCS device drivers # # CONFIG_PCS_XPCS is not set # end of PCS device drivers CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_FILTER=y # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y # CONFIG_PPPOE is not set CONFIG_PPPOE_HASH_BITS=4 # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_USB_NET_DRIVERS is not set CONFIG_WLAN=y CONFIG_WLAN_VENDOR_ADMTEK=y CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set CONFIG_ATH5K_PCI=y # CONFIG_ATH6KL is not set # CONFIG_WIL6210 is not set CONFIG_WLAN_VENDOR_ATMEL=y CONFIG_WLAN_VENDOR_BROADCOM=y # CONFIG_BRCMFMAC is not set CONFIG_WLAN_VENDOR_INTEL=y # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set # CONFIG_IWLWIFI is not set CONFIG_WLAN_VENDOR_INTERSIL=y CONFIG_WLAN_VENDOR_MARVELL=y # CONFIG_LIBERTAS is not set # CONFIG_MWIFIEX is not set CONFIG_WLAN_VENDOR_MEDIATEK=y CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set CONFIG_WLAN_VENDOR_PURELIFI=y CONFIG_WLAN_VENDOR_RALINK=y CONFIG_WLAN_VENDOR_REALTEK=y CONFIG_WLAN_VENDOR_RSI=y CONFIG_WLAN_VENDOR_SILABS=y CONFIG_WLAN_VENDOR_ST=y CONFIG_WLAN_VENDOR_TI=y CONFIG_WLAN_VENDOR_ZYDAS=y CONFIG_WLAN_VENDOR_QUANTENNA=y # CONFIG_QTNFMAC_PCIE is not set # CONFIG_VIRT_WIFI is not set CONFIG_WAN=y # CONFIG_HDLC is not set # CONFIG_FRAMER is not set # # Wireless WAN # # CONFIG_WWAN is not set # end of Wireless WAN CONFIG_XEN_NETDEV_FRONTEND=y # CONFIG_XEN_NETDEV_BACKEND is not set # CONFIG_VMXNET3 is not set # CONFIG_FUJITSU_ES is not set # CONFIG_NETDEVSIM is not set CONFIG_NET_FAILOVER=y CONFIG_ISDN=y # CONFIG_MISDN is not set # # Input device support # CONFIG_INPUT=y CONFIG_INPUT_LEDS=m # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set CONFIG_INPUT_VIVALDIFMAP=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # CONFIG_INPUT_KUNIT_TEST is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5520 is not set # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set # CONFIG_KEYBOARD_APPLESPI is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1050 is not set # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_DLINK_DIR685 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_PINEPHONE is not set # CONFIG_KEYBOARD_SAMSUNG is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_TM2_TOUCHKEY is not set # CONFIG_KEYBOARD_TWL4030 is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_CYPRESS_SF is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_PS2_VMMOUSE=y CONFIG_MOUSE_PS2_SMBUS=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_ELAN_I2C is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_ZHENHUA is not set # CONFIG_JOYSTICK_AS5011 is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set # CONFIG_JOYSTICK_PSXPAD_SPI is not set # CONFIG_JOYSTICK_PXRC is not set # CONFIG_JOYSTICK_QWIIC is not set # CONFIG_JOYSTICK_FSIA6B is not set # CONFIG_JOYSTICK_SENSEHAT is not set # CONFIG_JOYSTICK_SEESAW is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set # CONFIG_TABLET_USB_AIPTEK is not set # CONFIG_TABLET_USB_HANWANG is not set # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_PEGASUS is not set # CONFIG_TABLET_SERIAL_WACOM4 is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_88PM860X is not set # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_BU21029 is not set # CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set # CONFIG_TOUCHSCREEN_CY8CTMA140 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP5 is not set # CONFIG_TOUCHSCREEN_DA9034 is not set # CONFIG_TOUCHSCREEN_DA9052 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set # CONFIG_TOUCHSCREEN_EXC3000 is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GOODIX is not set # CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C is not set # CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI is not set # CONFIG_TOUCHSCREEN_HIDEEP is not set # CONFIG_TOUCHSCREEN_HYCON_HY46XX is not set # CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_ILITEK is not set # CONFIG_TOUCHSCREEN_S6SY761 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_EKTF2127 is not set CONFIG_TOUCHSCREEN_ELAN=y # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set # CONFIG_TOUCHSCREEN_MSG2638 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_NOVATEK_NVT_TS is not set # CONFIG_TOUCHSCREEN_IMAGIS is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set # CONFIG_TOUCHSCREEN_WM831X is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2004 is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_PCAP is not set # CONFIG_TOUCHSCREEN_RM_TS is not set # CONFIG_TOUCHSCREEN_SILEAD is not set # CONFIG_TOUCHSCREEN_SIS_I2C is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_STMFTS is not set # CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set # CONFIG_TOUCHSCREEN_SX8654 is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set # CONFIG_TOUCHSCREEN_ZET6223 is not set # CONFIG_TOUCHSCREEN_ZFORCE is not set # CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set # CONFIG_TOUCHSCREEN_IQS5XX is not set # CONFIG_TOUCHSCREEN_IQS7211 is not set # CONFIG_TOUCHSCREEN_ZINITIX is not set # CONFIG_TOUCHSCREEN_HIMAX_HX83112B is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_88PM860X_ONKEY is not set # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_E3X0_BUTTON is not set # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_MAX77693_HAPTIC is not set # CONFIG_INPUT_MAX8925_ONKEY is not set # CONFIG_INPUT_MAX8997_HAPTIC is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_GPIO_BEEPER is not set # CONFIG_INPUT_GPIO_DECODER is not set # CONFIG_INPUT_GPIO_VIBRA is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_REGULATOR_HAPTIC is not set # CONFIG_INPUT_TWL4030_PWRBUTTON is not set # CONFIG_INPUT_TWL4030_VIBRA is not set # CONFIG_INPUT_TWL6040_VIBRA is not set CONFIG_INPUT_UINPUT=y # CONFIG_INPUT_PALMAS_PWRBUTTON is not set # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_PWM_BEEPER is not set # CONFIG_INPUT_PWM_VIBRA is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_DA7280_HAPTICS is not set # CONFIG_INPUT_DA9052_ONKEY is not set # CONFIG_INPUT_DA9055_ONKEY is not set # CONFIG_INPUT_DA9063_ONKEY is not set # CONFIG_INPUT_WM831X_ON is not set # CONFIG_INPUT_PCAP is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_IQS269A is not set # CONFIG_INPUT_IQS626A is not set # CONFIG_INPUT_IQS7222 is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set # CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set # CONFIG_INPUT_DRV260X_HAPTICS is not set # CONFIG_INPUT_DRV2665_HAPTICS is not set # CONFIG_INPUT_DRV2667_HAPTICS is not set # CONFIG_RMI4_CORE is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_SERIO_GPIO_PS2 is not set # CONFIG_USERIO is not set # CONFIG_GAMEPORT is not set # end of Hardware I/O ports # end of Input device support # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=0 # CONFIG_LEGACY_TIOCSTI is not set CONFIG_LDISC_AUTOLOAD=y # # Serial drivers # CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_16550A_VARIANTS=y CONFIG_SERIAL_8250_FINTEK=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCILIB=y CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_EXAR is not set CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y # CONFIG_SERIAL_8250_PCI1XXXX is not set CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_8250_DW is not set CONFIG_SERIAL_8250_RT288X=y # CONFIG_SERIAL_8250_LPSS is not set CONFIG_SERIAL_8250_MID=y # CONFIG_SERIAL_8250_PERICOM is not set # # Non-8250 serial port support # CONFIG_SERIAL_KGDB_NMI=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_MAX310X=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_LANTIQ is not set CONFIG_SERIAL_SCCNXP=y CONFIG_SERIAL_SCCNXP_CONSOLE=y # CONFIG_SERIAL_SC16IS7XX is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_FSL_LINFLEXUART is not set # CONFIG_SERIAL_SPRD is not set # end of Serial drivers CONFIG_SERIAL_MCTRL_GPIO=y CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_N_HDLC is not set # CONFIG_N_GSM is not set # CONFIG_NOZOMI is not set # CONFIG_NULL_TTY is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y CONFIG_SERIAL_DEV_BUS=y CONFIG_SERIAL_DEV_CTRL_TTYPORT=y CONFIG_TTY_PRINTK=y CONFIG_TTY_PRINTK_LEVEL=6 CONFIG_VIRTIO_CONSOLE=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_BA431 is not set # CONFIG_HW_RANDOM_VIA is not set CONFIG_HW_RANDOM_VIRTIO=m # CONFIG_HW_RANDOM_XIPHERA is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set CONFIG_DEVMEM=y # CONFIG_NVRAM is not set CONFIG_DEVPORT=y CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HPET_MMAP_DEFAULT=y # CONFIG_HANGCHECK_TIMER is not set # CONFIG_UV_MMTIMER is not set CONFIG_TCG_TPM=y CONFIG_TCG_TPM2_HMAC=y CONFIG_HW_RANDOM_TPM=y CONFIG_TCG_TIS_CORE=y CONFIG_TCG_TIS=y # CONFIG_TCG_TIS_SPI is not set # CONFIG_TCG_TIS_I2C is not set # CONFIG_TCG_TIS_I2C_CR50 is not set # CONFIG_TCG_TIS_I2C_ATMEL is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set # CONFIG_TCG_TIS_I2C_NUVOTON is not set # CONFIG_TCG_NSC is not set # CONFIG_TCG_ATMEL is not set # CONFIG_TCG_INFINEON is not set # CONFIG_TCG_XEN is not set CONFIG_TCG_CRB=y # CONFIG_TCG_VTPM_PROXY is not set # CONFIG_TCG_TIS_ST33ZP24_I2C is not set # CONFIG_TCG_TIS_ST33ZP24_SPI is not set # CONFIG_TELCLOCK is not set # CONFIG_XILLYBUS is not set # CONFIG_XILLYUSB is not set # end of Character devices # # I2C support # CONFIG_I2C=y CONFIG_ACPI_I2C_OPREGION=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX=m # # Multiplexer I2C Chip support # # CONFIG_I2C_MUX_GPIO is not set # CONFIG_I2C_MUX_LTC4306 is not set # CONFIG_I2C_MUX_PCA9541 is not set # CONFIG_I2C_MUX_PCA954x is not set # CONFIG_I2C_MUX_REG is not set # CONFIG_I2C_MUX_MLXCPLD is not set # end of Multiplexer I2C Chip support CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_AMD_MP2 is not set CONFIG_I2C_I801=m # CONFIG_I2C_ISCH is not set # CONFIG_I2C_ISMT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_CHT_WC is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_NVIDIA_GPU is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_ZHAOXIN is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=y # CONFIG_I2C_DESIGNWARE_SLAVE is not set CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_DESIGNWARE_BAYTRAIL=y # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EMEV2 is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_CP2615 is not set # CONFIG_I2C_PCI1XXXX is not set # CONFIG_I2C_ROBOTFUZZ_OSIF is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_MLXCPLD is not set # CONFIG_I2C_VIRTIO is not set # end of I2C Hardware Bus support # CONFIG_I2C_STUB is not set # CONFIG_I2C_SLAVE is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # end of I2C support # CONFIG_I3C is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y CONFIG_SPI_MEM=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_AXI_SPI_ENGINE is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_CADENCE is not set # CONFIG_SPI_CH341 is not set # CONFIG_SPI_DESIGNWARE is not set # CONFIG_SPI_GPIO is not set # CONFIG_SPI_INTEL_PCI is not set # CONFIG_SPI_INTEL_PLATFORM is not set # CONFIG_SPI_MICROCHIP_CORE is not set # CONFIG_SPI_MICROCHIP_CORE_QSPI is not set # CONFIG_SPI_LANTIQ_SSC is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PCI1XXXX is not set # CONFIG_SPI_PXA2XX is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_SIFIVE is not set # CONFIG_SPI_MXIC is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_ZYNQMP_GQSPI is not set # CONFIG_SPI_AMD is not set # # SPI Multiplexer support # # CONFIG_SPI_MUX is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_LOOPBACK_TEST is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_SPI_SLAVE=y # CONFIG_SPI_SLAVE_TIME is not set # CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set CONFIG_SPI_DYNAMIC=y # CONFIG_SPMI is not set # CONFIG_HSI is not set CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # # PPS clients support # # CONFIG_PPS_CLIENT_KTIMER is not set # CONFIG_PPS_CLIENT_LDISC is not set # CONFIG_PPS_CLIENT_GPIO is not set # # PPS generators support # # # PTP clock support # CONFIG_PTP_1588_CLOCK=y CONFIG_PTP_1588_CLOCK_OPTIONAL=y # CONFIG_DP83640_PHY is not set # CONFIG_PTP_1588_CLOCK_INES is not set # CONFIG_PTP_1588_CLOCK_KVM is not set # CONFIG_PTP_1588_CLOCK_VMCLOCK is not set # CONFIG_PTP_1588_CLOCK_IDT82P33 is not set # CONFIG_PTP_1588_CLOCK_IDTCM is not set # CONFIG_PTP_1588_CLOCK_FC3W is not set # CONFIG_PTP_1588_CLOCK_MOCK is not set # CONFIG_PTP_1588_CLOCK_VMW is not set # end of PTP clock support CONFIG_PINCTRL=y CONFIG_PINMUX=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set CONFIG_PINCTRL_AMD=y # CONFIG_PINCTRL_CY8C95X0 is not set # CONFIG_PINCTRL_MCP23S08 is not set CONFIG_PINCTRL_SX150X=y # # Intel pinctrl drivers # CONFIG_PINCTRL_BAYTRAIL=y CONFIG_PINCTRL_CHERRYVIEW=y # CONFIG_PINCTRL_LYNXPOINT is not set CONFIG_PINCTRL_INTEL=y # CONFIG_PINCTRL_INTEL_PLATFORM is not set # CONFIG_PINCTRL_ALDERLAKE is not set # CONFIG_PINCTRL_BROXTON is not set # CONFIG_PINCTRL_CANNONLAKE is not set # CONFIG_PINCTRL_CEDARFORK is not set # CONFIG_PINCTRL_DENVERTON is not set # CONFIG_PINCTRL_ELKHARTLAKE is not set # CONFIG_PINCTRL_EMMITSBURG is not set # CONFIG_PINCTRL_GEMINILAKE is not set # CONFIG_PINCTRL_ICELAKE is not set # CONFIG_PINCTRL_JASPERLAKE is not set # CONFIG_PINCTRL_LAKEFIELD is not set # CONFIG_PINCTRL_LEWISBURG is not set # CONFIG_PINCTRL_METEORLAKE is not set # CONFIG_PINCTRL_METEORPOINT is not set # CONFIG_PINCTRL_SUNRISEPOINT is not set # CONFIG_PINCTRL_TIGERLAKE is not set # end of Intel pinctrl drivers # # Renesas pinctrl drivers # # end of Renesas pinctrl drivers CONFIG_GPIOLIB=y CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_GPIO_ACPI=y CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y CONFIG_GPIO_CDEV=y CONFIG_GPIO_CDEV_V1=y CONFIG_GPIO_GENERIC=y # # Memory mapped GPIO drivers # # CONFIG_GPIO_ALTERA is not set # CONFIG_GPIO_AMDPT is not set # CONFIG_GPIO_DWAPB is not set CONFIG_GPIO_GENERIC_PLATFORM=y # CONFIG_GPIO_GRANITERAPIDS is not set # CONFIG_GPIO_GRGPIO is not set # CONFIG_GPIO_ICH is not set # CONFIG_GPIO_MB86S7X is not set # CONFIG_GPIO_POLARFIRE_SOC is not set # CONFIG_GPIO_XILINX is not set # CONFIG_GPIO_AMD_FCH is not set # end of Memory mapped GPIO drivers # # Port-mapped I/O GPIO drivers # # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_104_DIO_48E is not set # CONFIG_GPIO_104_IDIO_16 is not set # CONFIG_GPIO_104_IDI_48 is not set # CONFIG_GPIO_F7188X is not set # CONFIG_GPIO_GPIO_MM is not set # CONFIG_GPIO_IT87 is not set # CONFIG_GPIO_SCH311X is not set # CONFIG_GPIO_WINBOND is not set # CONFIG_GPIO_WS16C48 is not set # end of Port-mapped I/O GPIO drivers # # I2C GPIO expanders # # CONFIG_GPIO_FXL6408 is not set # CONFIG_GPIO_DS4520 is not set # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCA9570 is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_TPIC2810 is not set # end of I2C GPIO expanders # # MFD GPIO expanders # # CONFIG_GPIO_ADP5520 is not set CONFIG_GPIO_CRYSTAL_COVE=y # CONFIG_GPIO_DA9052 is not set # CONFIG_GPIO_DA9055 is not set # CONFIG_GPIO_ELKHARTLAKE is not set CONFIG_GPIO_PALMAS=y CONFIG_GPIO_RC5T583=y CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y # CONFIG_GPIO_TPS65912 is not set # CONFIG_GPIO_TWL4030 is not set # CONFIG_GPIO_TWL6040 is not set # CONFIG_GPIO_WM831X is not set # CONFIG_GPIO_WM8350 is not set # end of MFD GPIO expanders # # PCI GPIO expanders # # CONFIG_GPIO_AMD8111 is not set # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_PCI_IDIO_16 is not set # CONFIG_GPIO_PCIE_IDIO_24 is not set # CONFIG_GPIO_RDC321X is not set # end of PCI GPIO expanders # # SPI GPIO expanders # # CONFIG_GPIO_MAX3191X is not set # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_PISOSR is not set # CONFIG_GPIO_XRA1403 is not set # end of SPI GPIO expanders # # USB GPIO expanders # # CONFIG_GPIO_MPSSE is not set # end of USB GPIO expanders # # Virtual GPIO drivers # # CONFIG_GPIO_AGGREGATOR is not set # CONFIG_GPIO_LATCH is not set # CONFIG_GPIO_MOCKUP is not set # CONFIG_GPIO_VIRTIO is not set # CONFIG_GPIO_SIM is not set # end of Virtual GPIO drivers # # GPIO Debugging utilities # # CONFIG_GPIO_SLOPPY_LOGIC_ANALYZER is not set # CONFIG_GPIO_VIRTUSER is not set # end of GPIO Debugging utilities # CONFIG_W1 is not set CONFIG_POWER_RESET=y CONFIG_POWER_RESET_RESTART=y # CONFIG_POWER_SEQUENCING is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set CONFIG_POWER_SUPPLY_HWMON=y # CONFIG_IP5XXX_POWER is not set # CONFIG_MAX8925_POWER is not set # CONFIG_WM831X_BACKUP is not set # CONFIG_WM831X_POWER is not set # CONFIG_WM8350_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_88PM860X is not set # CONFIG_CHARGER_ADP5061 is not set # CONFIG_BATTERY_CW2015 is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set CONFIG_BATTERY_SAMSUNG_SDI=y # CONFIG_BATTERY_SBS is not set # CONFIG_CHARGER_SBS is not set # CONFIG_MANAGER_SBS is not set # CONFIG_BATTERY_BQ27XXX is not set # CONFIG_BATTERY_DA9030 is not set # CONFIG_BATTERY_DA9052 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_BATTERY_MAX1720X is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_GPIO is not set CONFIG_CHARGER_MANAGER=y # CONFIG_CHARGER_LT3651 is not set # CONFIG_CHARGER_LTC4162L is not set # CONFIG_CHARGER_MAX14577 is not set # CONFIG_CHARGER_MAX77693 is not set # CONFIG_CHARGER_MAX77976 is not set # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_BQ24190 is not set # CONFIG_CHARGER_BQ24257 is not set # CONFIG_CHARGER_BQ24735 is not set # CONFIG_CHARGER_BQ2515X is not set # CONFIG_CHARGER_BQ25890 is not set # CONFIG_CHARGER_BQ25980 is not set # CONFIG_CHARGER_BQ256XX is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_CHARGER_TPS65090 is not set # CONFIG_BATTERY_GAUGE_LTC2941 is not set # CONFIG_BATTERY_GOLDFISH is not set # CONFIG_BATTERY_RT5033 is not set # CONFIG_CHARGER_RT9455 is not set # CONFIG_CHARGER_RT9467 is not set # CONFIG_CHARGER_RT9471 is not set # CONFIG_CHARGER_BD99954 is not set # CONFIG_BATTERY_UG3105 is not set # CONFIG_FUEL_GAUGE_MM8013 is not set CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7314 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM1177 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_AHT10 is not set # CONFIG_SENSORS_AS370 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_AXI_FAN_CONTROL is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_APPLESMC is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_CHIPCAP2 is not set # CONFIG_SENSORS_DRIVETEMP is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_DA9052_ADC is not set # CONFIG_SENSORS_DA9055 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_FTSTEUTATES is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_HIH6130 is not set # CONFIG_SENSORS_HS3001 is not set # CONFIG_SENSORS_I5500 is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_ISL28022 is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_POWERZ is not set # CONFIG_SENSORS_POWR1220 is not set # CONFIG_SENSORS_LENOVO_EC is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LTC2945 is not set # CONFIG_SENSORS_LTC2947_I2C is not set # CONFIG_SENSORS_LTC2947_SPI is not set # CONFIG_SENSORS_LTC2990 is not set # CONFIG_SENSORS_LTC2991 is not set # CONFIG_SENSORS_LTC2992 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4222 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4260 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LTC4282 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX127 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX31722 is not set # CONFIG_SENSORS_MAX31730 is not set # CONFIG_SENSORS_MAX31760 is not set # CONFIG_MAX31827 is not set # CONFIG_SENSORS_MAX6620 is not set # CONFIG_SENSORS_MAX6621 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MAX31790 is not set # CONFIG_SENSORS_MC34VR500 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_MLXREG_FAN is not set # CONFIG_SENSORS_TC654 is not set # CONFIG_SENSORS_TPS23861 is not set # CONFIG_SENSORS_MR75203 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_NCT6683 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NCT6775_I2C is not set # CONFIG_SENSORS_NCT7363 is not set # CONFIG_SENSORS_NCT7802 is not set # CONFIG_SENSORS_NCT7904 is not set # CONFIG_SENSORS_NPCM7XX is not set # CONFIG_SENSORS_OCC_P8_I2C is not set # CONFIG_SENSORS_OXP is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_PT5161L is not set # CONFIG_SENSORS_PWM_FAN is not set # CONFIG_SENSORS_SBTSI is not set # CONFIG_SENSORS_SBRMI is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SHT3x is not set # CONFIG_SENSORS_SHT4x is not set # CONFIG_SENSORS_SHTC1 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC2305 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_SCH5636 is not set # CONFIG_SENSORS_STTS751 is not set # CONFIG_SENSORS_ADC128D818 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_INA238 is not set # CONFIG_SENSORS_INA3221 is not set # CONFIG_SENSORS_SPD5118 is not set # CONFIG_SENSORS_TC74 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP103 is not set # CONFIG_SENSORS_TMP108 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_TMP464 is not set # CONFIG_SENSORS_TMP513 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83773G is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_WM831X is not set # CONFIG_SENSORS_WM8350 is not set # CONFIG_SENSORS_XGENE is not set # # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set # CONFIG_SENSORS_ASUS_EC is not set CONFIG_THERMAL=y CONFIG_THERMAL_NETLINK=y CONFIG_THERMAL_STATISTICS=y # CONFIG_THERMAL_DEBUGFS is not set # CONFIG_THERMAL_CORE_TESTING is not set CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set # CONFIG_THERMAL_DEFAULT_GOV_BANG_BANG is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_DEVFREQ_THERMAL=y # CONFIG_PCIE_THERMAL is not set CONFIG_THERMAL_EMULATION=y # # Intel thermal drivers # # CONFIG_INTEL_POWERCLAMP is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_X86_PKG_TEMP_THERMAL is not set # CONFIG_INTEL_SOC_DTS_THERMAL is not set # # ACPI INT340X thermal drivers # # CONFIG_INT340X_THERMAL is not set # end of ACPI INT340X thermal drivers # CONFIG_INTEL_PCH_THERMAL is not set # CONFIG_INTEL_TCC_COOLING is not set CONFIG_INTEL_HFI_THERMAL=y # end of Intel thermal drivers CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y CONFIG_WATCHDOG_OPEN_TIMEOUT=0 CONFIG_WATCHDOG_SYSFS=y # CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT is not set # # Watchdog Pretimeout Governors # CONFIG_WATCHDOG_PRETIMEOUT_GOV=y CONFIG_WATCHDOG_PRETIMEOUT_GOV_SEL=m CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP=y # CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC is not set CONFIG_WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP=y # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_DA9052_WATCHDOG is not set # CONFIG_DA9055_WATCHDOG is not set # CONFIG_DA9063_WATCHDOG is not set # CONFIG_LENOVO_SE10_WDT is not set # CONFIG_WDAT_WDT is not set # CONFIG_WM831X_WATCHDOG is not set # CONFIG_WM8350_WATCHDOG is not set # CONFIG_XILINX_WATCHDOG is not set # CONFIG_ZIIRAVE_WATCHDOG is not set # CONFIG_MLX_WDT is not set # CONFIG_CADENCE_WATCHDOG is not set # CONFIG_DW_WATCHDOG is not set # CONFIG_TWL4030_WATCHDOG is not set # CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ADVANTECH_EC_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_EBC_C384_WDT is not set # CONFIG_EXAR_WDT is not set # CONFIG_F71808E_WDT is not set # CONFIG_SP5100_TCO is not set # CONFIG_SBC_FITPC2_WATCHDOG is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_IE6XX_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_IT87_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_NV_TCO is not set # CONFIG_60XX_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_TQMX86_WDT is not set # CONFIG_VIA_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # CONFIG_NI903X_WDT is not set # CONFIG_NIC7018_WDT is not set # CONFIG_MEN_A21_WDT is not set # CONFIG_XEN_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y CONFIG_MFD_AS3711=y # CONFIG_MFD_SMPRO is not set CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y # CONFIG_MFD_BCM590XX is not set # CONFIG_MFD_BD9571MWV is not set # CONFIG_MFD_AXP20X_I2C is not set # CONFIG_MFD_CGBC is not set # CONFIG_MFD_CS42L43_I2C is not set # CONFIG_MFD_MADERA is not set CONFIG_PMIC_DA903X=y CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_SPI=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9055=y # CONFIG_MFD_DA9062 is not set CONFIG_MFD_DA9063=y # CONFIG_MFD_DA9150 is not set # CONFIG_MFD_DLN2 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_MFD_MP2629 is not set # CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set CONFIG_LPC_ICH=m # CONFIG_LPC_SCH is not set CONFIG_INTEL_SOC_PMIC=y CONFIG_INTEL_SOC_PMIC_CHTWC=y # CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set # CONFIG_INTEL_SOC_PMIC_MRFLD is not set # CONFIG_MFD_INTEL_LPSS_ACPI is not set # CONFIG_MFD_INTEL_LPSS_PCI is not set # CONFIG_MFD_INTEL_PMC_BXT is not set # CONFIG_MFD_IQS62X is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set CONFIG_MFD_88PM860X=y CONFIG_MFD_MAX14577=y # CONFIG_MFD_MAX77541 is not set CONFIG_MFD_MAX77693=y CONFIG_MFD_MAX77843=y # CONFIG_MFD_MAX8907 is not set CONFIG_MFD_MAX8925=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y # CONFIG_MFD_MT6360 is not set # CONFIG_MFD_MT6370 is not set # CONFIG_MFD_MT6397 is not set # CONFIG_MFD_MENF21BMC is not set # CONFIG_MFD_OCELOT is not set CONFIG_EZX_PCAP=y # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_SY7636A is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RT4831 is not set # CONFIG_MFD_RT5033 is not set # CONFIG_MFD_RT5120 is not set CONFIG_MFD_RC5T583=y # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_SKY81452 is not set CONFIG_MFD_SYSCON=y # CONFIG_MFD_LP3943 is not set CONFIG_MFD_LP8788=y # CONFIG_MFD_TI_LMU is not set CONFIG_MFD_PALMAS=y # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set # CONFIG_MFD_TPS65086 is not set CONFIG_MFD_TPS65090=y # CONFIG_MFD_TI_LP873X is not set CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y # CONFIG_MFD_TPS6594_I2C is not set # CONFIG_MFD_TPS6594_SPI is not set CONFIG_TWL4030_CORE=y CONFIG_MFD_TWL4030_AUDIO=y CONFIG_TWL6040_CORE=y # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TQMX86 is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y CONFIG_MFD_WM831X_SPI=y CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_ATC260X_I2C is not set # CONFIG_MFD_CS40L50_I2C is not set # CONFIG_MFD_CS40L50_SPI is not set # CONFIG_RAVE_SP_CORE is not set # CONFIG_MFD_INTEL_M10_BMC_SPI is not set # end of Multifunction device drivers CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set CONFIG_REGULATOR_NETLINK_EVENTS=y # CONFIG_REGULATOR_88PG86X is not set # CONFIG_REGULATOR_88PM8607 is not set # CONFIG_REGULATOR_ACT8865 is not set # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_AAT2870 is not set # CONFIG_REGULATOR_AS3711 is not set # CONFIG_REGULATOR_AW37503 is not set # CONFIG_REGULATOR_DA903X is not set # CONFIG_REGULATOR_DA9052 is not set # CONFIG_REGULATOR_DA9055 is not set # CONFIG_REGULATOR_DA9210 is not set # CONFIG_REGULATOR_DA9211 is not set # CONFIG_REGULATOR_FAN53555 is not set # CONFIG_REGULATOR_GPIO is not set # CONFIG_REGULATOR_ISL9305 is not set # CONFIG_REGULATOR_ISL6271A is not set # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_LP3972 is not set # CONFIG_REGULATOR_LP872X is not set # CONFIG_REGULATOR_LP8755 is not set # CONFIG_REGULATOR_LP8788 is not set # CONFIG_REGULATOR_LTC3589 is not set # CONFIG_REGULATOR_LTC3676 is not set # CONFIG_REGULATOR_MAX14577 is not set # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX77503 is not set # CONFIG_REGULATOR_MAX77857 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8893 is not set # CONFIG_REGULATOR_MAX8925 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8997 is not set # CONFIG_REGULATOR_MAX8998 is not set # CONFIG_REGULATOR_MAX20086 is not set # CONFIG_REGULATOR_MAX20411 is not set # CONFIG_REGULATOR_MAX77693 is not set # CONFIG_REGULATOR_MAX77826 is not set # CONFIG_REGULATOR_MP8859 is not set # CONFIG_REGULATOR_MT6311 is not set # CONFIG_REGULATOR_PALMAS is not set # CONFIG_REGULATOR_PCA9450 is not set # CONFIG_REGULATOR_PCAP is not set # CONFIG_REGULATOR_PV88060 is not set # CONFIG_REGULATOR_PV88080 is not set # CONFIG_REGULATOR_PV88090 is not set # CONFIG_REGULATOR_PWM is not set # CONFIG_REGULATOR_RAA215300 is not set # CONFIG_REGULATOR_RC5T583 is not set # CONFIG_REGULATOR_RT4801 is not set # CONFIG_REGULATOR_RT4803 is not set # CONFIG_REGULATOR_RT5190A is not set # CONFIG_REGULATOR_RT5739 is not set # CONFIG_REGULATOR_RT5759 is not set # CONFIG_REGULATOR_RT6160 is not set # CONFIG_REGULATOR_RT6190 is not set # CONFIG_REGULATOR_RT6245 is not set # CONFIG_REGULATOR_RTQ2134 is not set # CONFIG_REGULATOR_RTMV20 is not set # CONFIG_REGULATOR_RTQ6752 is not set # CONFIG_REGULATOR_RTQ2208 is not set # CONFIG_REGULATOR_SLG51000 is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set # CONFIG_REGULATOR_TPS65090 is not set # CONFIG_REGULATOR_TPS65132 is not set # CONFIG_REGULATOR_TPS6524X is not set # CONFIG_REGULATOR_TPS6586X is not set # CONFIG_REGULATOR_TPS65910 is not set # CONFIG_REGULATOR_TPS65912 is not set # CONFIG_REGULATOR_TWL4030 is not set # CONFIG_REGULATOR_WM831X is not set # CONFIG_REGULATOR_WM8350 is not set # CONFIG_REGULATOR_WM8400 is not set # CONFIG_RC_CORE is not set # # CEC support # CONFIG_MEDIA_CEC_SUPPORT=y # CONFIG_CEC_CH7322 is not set # CONFIG_CEC_GPIO is not set # CONFIG_CEC_SECO is not set # CONFIG_USB_PULSE8_CEC is not set # CONFIG_USB_RAINSHADOW_CEC is not set # end of CEC support # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # CONFIG_APERTURE_HELPERS=y CONFIG_SCREEN_INFO=y CONFIG_VIDEO=y CONFIG_AUXDISPLAY=y # CONFIG_HD44780 is not set # CONFIG_LCD2S is not set # CONFIG_CHARLCD_BL_OFF is not set # CONFIG_CHARLCD_BL_ON is not set CONFIG_CHARLCD_BL_FLASH=y # CONFIG_IMG_ASCII_LCD is not set # CONFIG_HT16K33 is not set # CONFIG_MAX6959 is not set # CONFIG_SEG_LED_GPIO is not set CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_INTEL_GTT=y CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=y # CONFIG_DRM_DEBUG_MM is not set # CONFIG_DRM_KUNIT_TEST is not set CONFIG_DRM_KMS_HELPER=y # CONFIG_DRM_PANIC is not set # CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set # CONFIG_DRM_DEBUG_MODESET_LOCK is not set CONFIG_DRM_CLIENT=y CONFIG_DRM_CLIENT_LIB=y CONFIG_DRM_CLIENT_SELECTION=y CONFIG_DRM_CLIENT_SETUP=y # # Supported DRM clients # CONFIG_DRM_FBDEV_EMULATION=y CONFIG_DRM_FBDEV_OVERALLOC=100 # CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set # end of Supported DRM clients CONFIG_DRM_LOAD_EDID_FIRMWARE=y CONFIG_DRM_GEM_SHMEM_HELPER=y # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_I2C_NXP_TDA9950 is not set # end of I2C encoder or helper chips # # ARM devices # # end of ARM devices # CONFIG_DRM_RADEON is not set # CONFIG_DRM_AMDGPU is not set # CONFIG_DRM_NOUVEAU is not set # CONFIG_DRM_I915 is not set # CONFIG_DRM_XE is not set # CONFIG_DRM_VGEM is not set # CONFIG_DRM_VKMS is not set # CONFIG_DRM_VMWGFX is not set # CONFIG_DRM_GMA500 is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set # CONFIG_DRM_QXL is not set # CONFIG_DRM_VIRTIO_GPU is not set CONFIG_DRM_PANEL=y # # Display Panels # # CONFIG_DRM_PANEL_AUO_A030JTN01 is not set # CONFIG_DRM_PANEL_ILITEK_ILI9341 is not set # CONFIG_DRM_PANEL_ORISETECH_OTA5601A is not set # CONFIG_DRM_PANEL_WIDECHIPS_WS2401 is not set # end of Display Panels CONFIG_DRM_BRIDGE=y CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # # CONFIG_DRM_ANALOGIX_ANX78XX is not set # end of Display Interface Bridges # CONFIG_DRM_ETNAVIV is not set # CONFIG_DRM_BOCHS is not set # CONFIG_DRM_CIRRUS_QEMU is not set # CONFIG_DRM_GM12U320 is not set # CONFIG_DRM_PANEL_MIPI_DBI is not set CONFIG_DRM_SIMPLEDRM=y # CONFIG_TINYDRM_HX8357D is not set # CONFIG_TINYDRM_ILI9163 is not set # CONFIG_TINYDRM_ILI9225 is not set # CONFIG_TINYDRM_ILI9341 is not set # CONFIG_TINYDRM_ILI9486 is not set # CONFIG_TINYDRM_MI0283QT is not set # CONFIG_TINYDRM_REPAPER is not set # CONFIG_TINYDRM_SHARP_MEMORY is not set # CONFIG_TINYDRM_ST7586 is not set # CONFIG_TINYDRM_ST7735R is not set # CONFIG_DRM_XEN_FRONTEND is not set # CONFIG_DRM_VBOXVIDEO is not set # CONFIG_DRM_GUD is not set # CONFIG_DRM_SSD130X is not set # CONFIG_DRM_WERROR is not set CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y # # Frame buffer Devices # CONFIG_FB=y # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set CONFIG_FB_ASILIANT=y CONFIG_FB_IMSTT=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_VESA is not set # CONFIG_FB_EFI is not set # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_OPENCORES is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_SSD1307 is not set # CONFIG_FB_SM712 is not set CONFIG_FB_CORE=y CONFIG_FB_NOTIFY=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_DEVICE=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set CONFIG_FB_SYSMEM_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_IOMEM_FOPS=y CONFIG_FB_IOMEM_HELPERS=y CONFIG_FB_SYSMEM_HELPERS=y CONFIG_FB_SYSMEM_HELPERS_DEFERRED=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # end of Frame buffer Devices # # Backlight & LCD device support # # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_KTD253 is not set # CONFIG_BACKLIGHT_KTD2801 is not set # CONFIG_BACKLIGHT_KTZ8866 is not set # CONFIG_BACKLIGHT_PWM is not set # CONFIG_BACKLIGHT_DA903X is not set # CONFIG_BACKLIGHT_DA9052 is not set # CONFIG_BACKLIGHT_MAX8925 is not set # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_QCOM_WLED is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_WM831X is not set # CONFIG_BACKLIGHT_ADP5520 is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_88PM860X is not set # CONFIG_BACKLIGHT_AAT2870 is not set # CONFIG_BACKLIGHT_LM3509 is not set # CONFIG_BACKLIGHT_LM3630A is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set # CONFIG_BACKLIGHT_LP8788 is not set # CONFIG_BACKLIGHT_MP3309C is not set # CONFIG_BACKLIGHT_PANDORA is not set # CONFIG_BACKLIGHT_AS3711 is not set # CONFIG_BACKLIGHT_GPIO is not set # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # CONFIG_BACKLIGHT_ARCXCNN is not set # end of Backlight & LCD device support CONFIG_HDMI=y # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_DUMMY_CONSOLE_COLUMNS=80 CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER=y # end of Console display driver support # CONFIG_LOGO is not set # end of Graphics support CONFIG_DRM_ACCEL=y # CONFIG_DRM_ACCEL_HABANALABS is not set # CONFIG_DRM_ACCEL_IVPU is not set # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y # CONFIG_HID is not set # # USB HID support # # CONFIG_USB_HID is not set CONFIG_HID_PID=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # end of USB HID Boot Protocol drivers # end of USB HID support # # Intel ISH HID support # # end of Intel ISH HID support # # AMD SFH HID Support # # end of AMD SFH HID Support CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_LED_TRIG=y # CONFIG_USB_ULPI_BUS is not set # CONFIG_USB_CONN_GPIO is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_PCI=y CONFIG_USB_PCI_AMD=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y # CONFIG_USB_FEW_INIT_RETRIES is not set CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_PRODUCTLIST is not set # CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set # CONFIG_USB_LEDS_TRIGGER_USBPORT is not set CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_DEFAULT_AUTHORIZATION_MODE=1 # CONFIG_USB_MON is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DBGCAP=y CONFIG_USB_XHCI_PCI=y # CONFIG_USB_XHCI_PCI_RENESAS is not set # CONFIG_USB_XHCI_PLATFORM is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set # CONFIG_USB_XEN_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_STORAGE is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USBIP_CORE is not set # # USB dual-mode controller drivers # # CONFIG_USB_CDNS_SUPPORT is not set # CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_DWC3 is not set CONFIG_USB_DWC2=y CONFIG_USB_DWC2_HOST=y # # Gadget/Dual-role mode requires USB Gadget support to be enabled # # CONFIG_USB_DWC2_PCI is not set # CONFIG_USB_DWC2_DEBUG is not set # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set # CONFIG_USB_CHIPIDEA is not set # CONFIG_USB_ISP1760 is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_APPLE_MFI_FASTCHARGE is not set # CONFIG_USB_LJCA is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HUB_USB251XB is not set # CONFIG_USB_HSIC_USB3503 is not set # CONFIG_USB_HSIC_USB4604 is not set # CONFIG_USB_LINK_LAYER_TEST is not set # CONFIG_USB_CHAOSKEY is not set # # USB Physical Layer drivers # # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # end of USB Physical Layer drivers # CONFIG_USB_GADGET is not set # CONFIG_TYPEC is not set CONFIG_USB_ROLE_SWITCH=y # CONFIG_USB_ROLES_INTEL_XHCI is not set CONFIG_MMC=y # CONFIG_MMC_BLOCK is not set # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set CONFIG_MMC_CRYPTO=y # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set # CONFIG_MMC_SPI is not set # CONFIG_MMC_CB710 is not set # CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MMC_USDHI6ROL0 is not set # CONFIG_MMC_CQHCI is not set # CONFIG_MMC_HSQ is not set # CONFIG_MMC_TOSHIBA_PCI is not set # CONFIG_MMC_MTK is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # CONFIG_LEDS_CLASS_FLASH is not set # CONFIG_LEDS_CLASS_MULTICOLOR is not set CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y # # LED drivers # # CONFIG_LEDS_88PM860X is not set # CONFIG_LEDS_APU is not set # CONFIG_LEDS_AW200XX is not set # CONFIG_LEDS_CHT_WCOVE is not set # CONFIG_LEDS_LM3530 is not set # CONFIG_LEDS_LM3532 is not set # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP3952 is not set # CONFIG_LEDS_LP8788 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA963X is not set # CONFIG_LEDS_PCA995X is not set # CONFIG_LEDS_WM831X_STATUS is not set # CONFIG_LEDS_WM8350 is not set # CONFIG_LEDS_DA903X is not set # CONFIG_LEDS_DA9052 is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2606MVV is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_INTEL_SS4200 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_ADP5520 is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_TLC591XX is not set # CONFIG_LEDS_MAX8997 is not set # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_IS31FL319X is not set # # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # # CONFIG_LEDS_BLINKM is not set # CONFIG_LEDS_MLXCPLD is not set # CONFIG_LEDS_MLXREG is not set # CONFIG_LEDS_USER is not set # CONFIG_LEDS_NIC78BX is not set # CONFIG_LEDS_SPI_BYTE is not set # # Flash and Torch LED drivers # # # RGB LED drivers # # # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_ONESHOT is not set CONFIG_LEDS_TRIGGER_DISK=y # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_CPU=y # CONFIG_LEDS_TRIGGER_ACTIVITY is not set # CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set CONFIG_LEDS_TRIGGER_PANIC=y # CONFIG_LEDS_TRIGGER_NETDEV is not set # CONFIG_LEDS_TRIGGER_PATTERN is not set # CONFIG_LEDS_TRIGGER_TTY is not set # CONFIG_LEDS_TRIGGER_INPUT_EVENTS is not set # # Simple LED drivers # CONFIG_ACCESSIBILITY=y # CONFIG_A11Y_BRAILLE_CONSOLE is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set # end of Speakup console speech # CONFIG_INFINIBAND is not set CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y # CONFIG_EDAC_LEGACY_SYSFS is not set # CONFIG_EDAC_DEBUG is not set # CONFIG_EDAC_DECODE_MCE is not set CONFIG_EDAC_GHES=y # CONFIG_EDAC_E752X is not set # CONFIG_EDAC_I82975X is not set # CONFIG_EDAC_I3000 is not set # CONFIG_EDAC_I3200 is not set # CONFIG_EDAC_IE31200 is not set # CONFIG_EDAC_X38 is not set # CONFIG_EDAC_I5400 is not set # CONFIG_EDAC_I7CORE is not set # CONFIG_EDAC_I5100 is not set # CONFIG_EDAC_I7300 is not set # CONFIG_EDAC_SBRIDGE is not set CONFIG_EDAC_SKX=m CONFIG_EDAC_I10NM=m # CONFIG_EDAC_PND2 is not set # CONFIG_EDAC_IGEN6 is not set CONFIG_RTC_LIB=y CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_SYSTOHC=y CONFIG_RTC_SYSTOHC_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # CONFIG_RTC_LIB_KUNIT_TEST is not set CONFIG_RTC_NVMEM=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_88PM860X is not set # CONFIG_RTC_DRV_ABB5ZES3 is not set # CONFIG_RTC_DRV_ABEOZ9 is not set # CONFIG_RTC_DRV_ABX80X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_LP8788 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_MAX8925 is not set # CONFIG_RTC_DRV_MAX8998 is not set # CONFIG_RTC_DRV_MAX8997 is not set # CONFIG_RTC_DRV_MAX31335 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF85063 is not set # CONFIG_RTC_DRV_PCF85363 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_PALMAS is not set # CONFIG_RTC_DRV_TPS6586X is not set # CONFIG_RTC_DRV_TPS65910 is not set # CONFIG_RTC_DRV_RC5T583 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8010 is not set # CONFIG_RTC_DRV_RX8111 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3028 is not set # CONFIG_RTC_DRV_RV3032 is not set # CONFIG_RTC_DRV_RV8803 is not set # CONFIG_RTC_DRV_SD2405AL is not set # CONFIG_RTC_DRV_SD3078 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1302 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6916 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RX4581 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_MCP795 is not set CONFIG_RTC_I2C_AND_SPI=y # # SPI and I2C RTC drivers # # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # CONFIG_RTC_DRV_RX6110 is not set # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1685_FAMILY is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_DA9052 is not set # CONFIG_RTC_DRV_DA9055 is not set # CONFIG_RTC_DRV_DA9063 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_WM831X is not set # CONFIG_RTC_DRV_WM8350 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_FTRTC010 is not set # CONFIG_RTC_DRV_PCAP is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_GOLDFISH is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # CONFIG_DMA_ENGINE=y CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_ACPI=y # CONFIG_ALTERA_MSGDMA is not set # CONFIG_INTEL_IDMA64 is not set # CONFIG_INTEL_IDXD is not set # CONFIG_INTEL_IDXD_COMPAT is not set # CONFIG_INTEL_IOATDMA is not set # CONFIG_PLX_DMA is not set # CONFIG_XILINX_DMA is not set # CONFIG_XILINX_XDMA is not set # CONFIG_AMD_QDMA is not set # CONFIG_AMD_PTDMA is not set # CONFIG_QCOM_HIDMA_MGMT is not set # CONFIG_QCOM_HIDMA is not set # CONFIG_DW_DMAC is not set # CONFIG_DW_DMAC_PCI is not set # CONFIG_DW_EDMA is not set CONFIG_HSU_DMA=y # CONFIG_SF_PDMA is not set CONFIG_INTEL_LDMA=y # # DMA Clients # CONFIG_ASYNC_TX_DMA=y # CONFIG_DMATEST is not set # # DMABUF options # CONFIG_SYNC_FILE=y CONFIG_SW_SYNC=y CONFIG_UDMABUF=y CONFIG_DMABUF_MOVE_NOTIFY=y # CONFIG_DMABUF_DEBUG is not set # CONFIG_DMABUF_SELFTESTS is not set CONFIG_DMABUF_HEAPS=y # CONFIG_DMABUF_SYSFS_STATS is not set CONFIG_DMABUF_HEAPS_SYSTEM=y # end of DMABUF options # CONFIG_UIO is not set # CONFIG_VFIO is not set CONFIG_IRQ_BYPASS_MANAGER=y CONFIG_VIRT_DRIVERS=y # CONFIG_VMGENID is not set # CONFIG_VBOXGUEST is not set # CONFIG_NITRO_ENCLAVES is not set # CONFIG_ACRN_HSM is not set # CONFIG_EFI_SECRET is not set # CONFIG_SEV_GUEST is not set # CONFIG_TDX_GUEST_DRIVER is not set CONFIG_VIRTIO_ANCHOR=y CONFIG_VIRTIO=y CONFIG_VIRTIO_PCI_LIB=y CONFIG_VIRTIO_PCI_LIB_LEGACY=y CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_PCI=y CONFIG_VIRTIO_PCI_ADMIN_LEGACY=y CONFIG_VIRTIO_PCI_LEGACY=y # CONFIG_VIRTIO_PMEM is not set CONFIG_VIRTIO_BALLOON=y # CONFIG_VIRTIO_MEM is not set # CONFIG_VIRTIO_INPUT is not set CONFIG_VIRTIO_MMIO=y CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y # CONFIG_VIRTIO_DEBUG is not set # CONFIG_VDPA is not set CONFIG_VHOST_TASK=y CONFIG_VHOST_MENU=y # CONFIG_VHOST_NET is not set # CONFIG_VHOST_VSOCK is not set # CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set # # Microsoft Hyper-V guest support # # CONFIG_HYPERV is not set # end of Microsoft Hyper-V guest support # # Xen driver support # CONFIG_XEN_BALLOON=y CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512 CONFIG_XEN_SCRUB_PAGES_DEFAULT=y # CONFIG_XEN_DEV_EVTCHN is not set CONFIG_XEN_BACKEND=y # CONFIG_XENFS is not set CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set CONFIG_XEN_GRANT_DMA_ALLOC=y CONFIG_SWIOTLB_XEN=y # CONFIG_XEN_PCIDEV_BACKEND is not set # CONFIG_XEN_PVCALLS_FRONTEND is not set # CONFIG_XEN_PVCALLS_BACKEND is not set # CONFIG_XEN_PRIVCMD is not set CONFIG_XEN_ACPI_PROCESSOR=y CONFIG_XEN_MCE_LOG=y CONFIG_XEN_HAVE_PVMMU=y CONFIG_XEN_EFI=y CONFIG_XEN_AUTO_XLATE=y CONFIG_XEN_ACPI=y CONFIG_XEN_HAVE_VPMU=y CONFIG_XEN_UNPOPULATED_ALLOC=y CONFIG_XEN_GRANT_DMA_OPS=y CONFIG_XEN_VIRTIO=y # CONFIG_XEN_VIRTIO_FORCE_GRANT is not set # end of Xen driver support # CONFIG_GREYBUS is not set # CONFIG_COMEDI is not set CONFIG_STAGING=y # CONFIG_RTL8723BS is not set # CONFIG_FB_SM750 is not set CONFIG_STAGING_MEDIA=y # CONFIG_FB_TFT is not set CONFIG_VME_BUS=y # # VME Bridge Drivers # # CONFIG_VME_TSI148 is not set # CONFIG_VME_FAKE is not set # # VME Device Drivers # # CONFIG_VME_USER is not set # CONFIG_GPIB is not set # CONFIG_GOLDFISH is not set CONFIG_CHROME_PLATFORMS=y # CONFIG_CHROMEOS_ACPI is not set # CONFIG_CHROMEOS_LAPTOP is not set # CONFIG_CHROMEOS_PSTORE is not set # CONFIG_CHROMEOS_TBMC is not set # CONFIG_CROS_EC is not set # CONFIG_CROS_KBD_LED_BACKLIGHT is not set # CONFIG_CHROMEOS_PRIVACY_SCREEN is not set # CONFIG_CZNIC_PLATFORMS is not set CONFIG_MELLANOX_PLATFORM=y # CONFIG_MLXREG_HOTPLUG is not set # CONFIG_MLXREG_IO is not set # CONFIG_MLXREG_LC is not set # CONFIG_NVSW_SN2201 is not set CONFIG_SURFACE_PLATFORMS=y # CONFIG_SURFACE_3_POWER_OPREGION is not set # CONFIG_SURFACE_GPE is not set # CONFIG_SURFACE_HOTPLUG is not set # CONFIG_SURFACE_PRO3_BUTTON is not set # CONFIG_SURFACE_AGGREGATOR is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACPI_WMI is not set # CONFIG_UV_SYSFS is not set # CONFIG_YT2_1380 is not set # CONFIG_ACERHDF is not set # CONFIG_ACER_WIRELESS is not set # # AMD HSMP Driver # # CONFIG_AMD_HSMP_ACPI is not set # CONFIG_AMD_HSMP_PLAT is not set # end of AMD HSMP Driver # CONFIG_AMD_PMC is not set # CONFIG_AMD_3D_VCACHE is not set CONFIG_AMD_WBRF=y # CONFIG_ADV_SWBUTTON is not set # CONFIG_APPLE_GMUX is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_ASUS_WIRELESS is not set # CONFIG_EEEPC_LAPTOP is not set CONFIG_X86_PLATFORM_DRIVERS_DELL=y # CONFIG_DCDBAS is not set # CONFIG_DELL_RBU is not set # CONFIG_DELL_RBTN is not set # CONFIG_DELL_SMBIOS is not set # CONFIG_DELL_SMO8800 is not set # CONFIG_AMILO_RFKILL is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_FUJITSU_TABLET is not set # CONFIG_GPD_POCKET_FAN is not set CONFIG_X86_PLATFORM_DRIVERS_HP=y # CONFIG_HP_ACCEL is not set # CONFIG_WIRELESS_HOTKEY is not set # CONFIG_IBM_RTL is not set # CONFIG_IDEAPAD_LAPTOP is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_INTEL_ATOMISP2_PM is not set # CONFIG_INTEL_IFS is not set # CONFIG_INTEL_SAR_INT1092 is not set # CONFIG_INTEL_SKL_INT3472 is not set # # Intel Speed Select Technology interface support # # CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set # end of Intel Speed Select Technology interface support # # Intel Uncore Frequency Control # CONFIG_INTEL_UNCORE_FREQ_CONTROL=m # end of Intel Uncore Frequency Control # CONFIG_INTEL_HID_EVENT is not set # CONFIG_INTEL_VBTN is not set # CONFIG_INTEL_INT0002_VGPIO is not set # CONFIG_INTEL_OAKTRAIL is not set # CONFIG_INTEL_BYTCRC_PWRSRC is not set # CONFIG_INTEL_PUNIT_IPC is not set # CONFIG_INTEL_RST is not set # CONFIG_INTEL_SMARTCONNECT is not set CONFIG_INTEL_TURBO_MAX_3=y # CONFIG_INTEL_VSEC is not set # CONFIG_ACPI_QUICKSTART is not set # CONFIG_MEEGOPAD_ANX7428 is not set # CONFIG_MSI_EC is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PCENGINES_APU2 is not set # CONFIG_BARCO_P50_GPIO is not set # CONFIG_SAMSUNG_LAPTOP is not set # CONFIG_SAMSUNG_Q10 is not set # CONFIG_TOSHIBA_BT_RFKILL is not set # CONFIG_TOSHIBA_HAPS is not set # CONFIG_ACPI_CMPC is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_SYSTEM76_ACPI is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_SERIAL_MULTI_INSTANTIATE is not set # CONFIG_MLX_PLATFORM is not set # CONFIG_X86_ANDROID_TABLETS is not set # CONFIG_INTEL_IPS is not set CONFIG_INTEL_SCU_IPC=y CONFIG_INTEL_SCU=y CONFIG_INTEL_SCU_PCI=y # CONFIG_INTEL_SCU_PLATFORM is not set # CONFIG_INTEL_SCU_IPC_UTIL is not set # CONFIG_SIEMENS_SIMATIC_IPC is not set # CONFIG_WINMATE_FM07_KEYS is not set CONFIG_P2SB=y CONFIG_HAVE_CLK=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y # CONFIG_COMMON_CLK_WM831X is not set # CONFIG_LMK04832 is not set # CONFIG_COMMON_CLK_MAX9485 is not set # CONFIG_COMMON_CLK_SI5341 is not set # CONFIG_COMMON_CLK_SI5351 is not set # CONFIG_COMMON_CLK_SI544 is not set # CONFIG_COMMON_CLK_CDCE706 is not set # CONFIG_COMMON_CLK_CS2000_CP is not set # CONFIG_CLK_TWL is not set # CONFIG_CLK_TWL6040 is not set # CONFIG_COMMON_CLK_PALMAS is not set # CONFIG_COMMON_CLK_PWM is not set # CONFIG_XILINX_VCU is not set # CONFIG_CLK_KUNIT_TEST is not set # CONFIG_CLK_FIXED_RATE_KUNIT_TEST is not set # CONFIG_CLK_GATE_KUNIT_TEST is not set # CONFIG_CLK_FD_KUNIT_TEST is not set CONFIG_HWSPINLOCK=y # # Clock Source drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # end of Clock Source drivers CONFIG_MAILBOX=y CONFIG_PCC=y # CONFIG_ALTERA_MBOX is not set CONFIG_IOMMU_IOVA=y CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # CONFIG_IOMMU_IO_PGTABLE=y # end of Generic IOMMU Pagetable Support # CONFIG_IOMMU_DEBUGFS is not set # CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set CONFIG_IOMMU_DEFAULT_DMA_LAZY=y # CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set CONFIG_IOMMU_DMA=y CONFIG_IOMMU_SVA=y CONFIG_IOMMU_IOPF=y CONFIG_AMD_IOMMU=y CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y CONFIG_INTEL_IOMMU_SVM=y CONFIG_INTEL_IOMMU_DEFAULT_ON=y CONFIG_INTEL_IOMMU_FLOPPY_WA=y CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y CONFIG_INTEL_IOMMU_PERF_EVENTS=y # CONFIG_IOMMUFD is not set CONFIG_IRQ_REMAP=y CONFIG_VIRTIO_IOMMU=y # # Remoteproc drivers # CONFIG_REMOTEPROC=y CONFIG_REMOTEPROC_CDEV=y # end of Remoteproc drivers # # Rpmsg drivers # # CONFIG_RPMSG_QCOM_GLINK_RPM is not set # CONFIG_RPMSG_VIRTIO is not set # end of Rpmsg drivers # # SOC (System On Chip) specific Drivers # # # Amlogic SoC drivers # # end of Amlogic SoC drivers # # Broadcom SoC drivers # # end of Broadcom SoC drivers # # NXP/Freescale QorIQ SoC drivers # # end of NXP/Freescale QorIQ SoC drivers # # fujitsu SoC drivers # # end of fujitsu SoC drivers # # i.MX SoC drivers # # end of i.MX SoC drivers # # Enable LiteX SoC Builder specific drivers # # end of Enable LiteX SoC Builder specific drivers # CONFIG_WPCM450_SOC is not set # # Qualcomm SoC drivers # # end of Qualcomm SoC drivers CONFIG_SOC_TI=y # # Xilinx SoC drivers # # end of Xilinx SoC drivers # end of SOC (System On Chip) specific Drivers # # PM Domains # # # Amlogic PM Domains # # end of Amlogic PM Domains # # Broadcom PM Domains # # end of Broadcom PM Domains # # i.MX PM Domains # # end of i.MX PM Domains # # Qualcomm PM Domains # # end of Qualcomm PM Domains # end of PM Domains CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y CONFIG_DEVFREQ_GOV_PASSIVE=y # # DEVFREQ Drivers # CONFIG_PM_DEVFREQ_EVENT=y CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_FSA9480 is not set # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_INTEL_INT3496 is not set # CONFIG_EXTCON_INTEL_CHT_WC is not set # CONFIG_EXTCON_LC824206XA is not set # CONFIG_EXTCON_MAX14577 is not set # CONFIG_EXTCON_MAX3355 is not set # CONFIG_EXTCON_MAX77693 is not set # CONFIG_EXTCON_MAX77843 is not set # CONFIG_EXTCON_MAX8997 is not set # CONFIG_EXTCON_PALMAS is not set # CONFIG_EXTCON_PTN5150 is not set # CONFIG_EXTCON_RT8973A is not set # CONFIG_EXTCON_SM5502 is not set # CONFIG_EXTCON_USB_GPIO is not set CONFIG_MEMORY=y # CONFIG_IIO is not set # CONFIG_NTB is not set CONFIG_PWM=y # CONFIG_PWM_DEBUG is not set # CONFIG_PWM_CLK is not set CONFIG_PWM_CRC=y # CONFIG_PWM_DWC is not set # CONFIG_PWM_GPIO is not set CONFIG_PWM_LPSS=y CONFIG_PWM_LPSS_PCI=y CONFIG_PWM_LPSS_PLATFORM=y # CONFIG_PWM_PCA9685 is not set # CONFIG_PWM_TWL is not set # CONFIG_PWM_TWL_LED is not set # # IRQ chip support # # CONFIG_LAN966X_OIC is not set # end of IRQ chip support # CONFIG_IPACK_BUS is not set CONFIG_RESET_CONTROLLER=y # CONFIG_RESET_GPIO is not set CONFIG_RESET_SIMPLE=y # CONFIG_RESET_TI_SYSCON is not set # CONFIG_RESET_TI_TPS380X is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y # CONFIG_USB_LGM_PHY is not set # CONFIG_PHY_CAN_TRANSCEIVER is not set # # PHY drivers for Broadcom platforms # # CONFIG_BCM_KONA_USB2_PHY is not set # end of PHY drivers for Broadcom platforms # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set # CONFIG_PHY_SAMSUNG_USB2 is not set # CONFIG_PHY_INTEL_LGM_EMMC is not set # end of PHY Subsystem CONFIG_POWERCAP=y CONFIG_INTEL_RAPL_CORE=m CONFIG_INTEL_RAPL=m CONFIG_IDLE_INJECT=y # CONFIG_MCB is not set # # Performance monitor support # # CONFIG_DWC_PCIE_PMU is not set # end of Performance monitor support CONFIG_RAS=y CONFIG_RAS_CEC=y # CONFIG_RAS_CEC_DEBUG is not set # CONFIG_AMD_ATL is not set # CONFIG_USB4 is not set # # Android # # CONFIG_ANDROID_BINDER_IPC is not set # end of Android CONFIG_LIBNVDIMM=y # CONFIG_BLK_DEV_PMEM is not set CONFIG_ND_CLAIM=y CONFIG_BTT=y CONFIG_NVDIMM_PFN=y CONFIG_NVDIMM_DAX=y CONFIG_NVDIMM_KEYS=y # CONFIG_NVDIMM_SECURITY_TEST is not set CONFIG_DAX=y # CONFIG_DEV_DAX is not set # CONFIG_DEV_DAX_HMEM is not set CONFIG_NVMEM=y CONFIG_NVMEM_SYSFS=y # CONFIG_NVMEM_LAYOUTS is not set # CONFIG_NVMEM_RMEM is not set # # HW tracing support # # CONFIG_STM is not set # CONFIG_INTEL_TH is not set # end of HW tracing support # CONFIG_FPGA is not set # CONFIG_TEE is not set CONFIG_PM_OPP=y # CONFIG_SIOX is not set # CONFIG_SLIMBUS is not set CONFIG_INTERCONNECT=y # CONFIG_COUNTER is not set # CONFIG_MOST is not set # CONFIG_PECI is not set CONFIG_HTE=y # end of Device Drivers # # File systems # CONFIG_DCACHE_WORD_ACCESS=y CONFIG_VALIDATE_FS_PARSER=y CONFIG_FS_IOMAP=y CONFIG_FS_STACK=y CONFIG_BUFFER_HEAD=y CONFIG_LEGACY_DIRECT_IO=y # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y # CONFIG_EXT4_DEBUG is not set # CONFIG_EXT4_KUNIT_TESTS is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set # CONFIG_BTRFS_EXPERIMENTAL is not set # CONFIG_BTRFS_FS_REF_VERIFY is not set # CONFIG_NILFS2_FS is not set # CONFIG_F2FS_FS is not set # CONFIG_BCACHEFS_FS is not set # CONFIG_ZONEFS_FS is not set CONFIG_FS_DAX=y CONFIG_FS_DAX_PMD=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=y CONFIG_FS_ENCRYPTION=y CONFIG_FS_ENCRYPTION_ALGS=y CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y CONFIG_FS_VERITY=y CONFIG_FS_VERITY_BUILTIN_SIGNATURES=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_QUOTA_DEBUG is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=y # CONFIG_CUSE is not set CONFIG_VIRTIO_FS=m CONFIG_FUSE_DAX=y CONFIG_FUSE_PASSTHROUGH=y # CONFIG_OVERLAY_FS is not set # # Caches # # end of Caches # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # end of CD-ROM/DVD Filesystems # # DOS/FAT/EXFAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_FAT_DEFAULT_UTF8 is not set # CONFIG_FAT_KUNIT_TEST is not set # CONFIG_EXFAT_FS is not set # CONFIG_NTFS3_FS is not set # CONFIG_NTFS_FS is not set # end of DOS/FAT/EXFAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_VMCORE_DEVICE_DUMP=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_TMPFS_INODE64=y CONFIG_TMPFS_QUOTA=y CONFIG_HUGETLBFS=y # CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON is not set CONFIG_HUGETLB_PAGE=y CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y CONFIG_HUGETLB_PMD_PAGE_TABLE_SHARING=y CONFIG_ARCH_HAS_GIGANTIC_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y # end of Pseudo filesystems CONFIG_MISC_FILESYSTEMS=y # CONFIG_ORANGEFS_FS is not set # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_ECRYPT_FS=y CONFIG_ECRYPT_FS_MESSAGING=y # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=y # CONFIG_SQUASHFS_FILE_CACHE is not set CONFIG_SQUASHFS_FILE_DIRECT=y CONFIG_SQUASHFS_DECOMP_SINGLE=y CONFIG_SQUASHFS_DECOMP_MULTI=y CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT=y CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS=y CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y CONFIG_SQUASHFS_ZSTD=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_PSTORE=y CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240 CONFIG_PSTORE_COMPRESS=y # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set # CONFIG_PSTORE_RAM is not set # CONFIG_PSTORE_BLK is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_EROFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_SMB_SERVER is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set # CONFIG_NLS_ISO8859_1 is not set # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set CONFIG_UNICODE=y # CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set CONFIG_IO_WQ=y # end of File systems # # Security options # CONFIG_KEYS=y CONFIG_KEYS_REQUEST_CACHE=y CONFIG_PERSISTENT_KEYRINGS=y CONFIG_TRUSTED_KEYS=y CONFIG_HAVE_TRUSTED_KEYS=y CONFIG_TRUSTED_KEYS_TPM=y CONFIG_ENCRYPTED_KEYS=y CONFIG_USER_DECRYPTED_DATA=y CONFIG_KEY_DH_OPERATIONS=y CONFIG_KEY_NOTIFICATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y CONFIG_PROC_MEM_ALWAYS_FORCE=y # CONFIG_PROC_MEM_FORCE_PTRACE is not set # CONFIG_PROC_MEM_NO_FORCE is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_PATH=y CONFIG_INTEL_TXT=y CONFIG_LSM_MMAP_MIN_ADDR=0 CONFIG_HARDENED_USERCOPY=y CONFIG_FORTIFY_SOURCE=y # CONFIG_STATIC_USERMODEHELPER is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_SIDTAB_HASH_BITS=9 CONFIG_SECURITY_SELINUX_SID2STR_CACHE_SIZE=256 # CONFIG_SECURITY_SELINUX_DEBUG is not set CONFIG_SECURITY_SMACK=y # CONFIG_SECURITY_SMACK_BRINGUP is not set CONFIG_SECURITY_SMACK_NETFILTER=y CONFIG_SECURITY_SMACK_APPEND_SIGNALS=y CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 # CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" # CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING is not set CONFIG_SECURITY_APPARMOR=y # CONFIG_SECURITY_APPARMOR_DEBUG is not set CONFIG_SECURITY_APPARMOR_INTROSPECT_POLICY=y CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y CONFIG_SECURITY_APPARMOR_EXPORT_BINARY=y CONFIG_SECURITY_APPARMOR_PARANOID_LOAD=y # CONFIG_SECURITY_APPARMOR_KUNIT_TEST is not set # CONFIG_SECURITY_LOADPIN is not set CONFIG_SECURITY_YAMA=y CONFIG_SECURITY_SAFESETID=y CONFIG_SECURITY_LOCKDOWN_LSM=y CONFIG_SECURITY_LOCKDOWN_LSM_EARLY=y CONFIG_LOCK_DOWN_KERNEL_FORCE_NONE=y # CONFIG_LOCK_DOWN_KERNEL_FORCE_INTEGRITY is not set # CONFIG_LOCK_DOWN_KERNEL_FORCE_CONFIDENTIALITY is not set CONFIG_SECURITY_LANDLOCK=y # CONFIG_SECURITY_LANDLOCK_KUNIT_TEST is not set # CONFIG_SECURITY_IPE is not set CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y CONFIG_INTEGRITY_TRUSTED_KEYRING=y CONFIG_INTEGRITY_PLATFORM_KEYRING=y CONFIG_INTEGRITY_MACHINE_KEYRING=y # CONFIG_INTEGRITY_CA_MACHINE_KEYRING is not set CONFIG_LOAD_UEFI_KEYS=y CONFIG_INTEGRITY_AUDIT=y CONFIG_IMA=y CONFIG_IMA_KEXEC=y CONFIG_IMA_MEASURE_PCR_IDX=10 CONFIG_IMA_LSM_RULES=y CONFIG_IMA_NG_TEMPLATE=y # CONFIG_IMA_SIG_TEMPLATE is not set CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" # CONFIG_IMA_DEFAULT_HASH_SHA1 is not set CONFIG_IMA_DEFAULT_HASH_SHA256=y # CONFIG_IMA_DEFAULT_HASH_SHA512 is not set CONFIG_IMA_DEFAULT_HASH="sha256" # CONFIG_IMA_WRITE_POLICY is not set # CONFIG_IMA_READ_POLICY is not set CONFIG_IMA_APPRAISE=y CONFIG_IMA_ARCH_POLICY=y # CONFIG_IMA_APPRAISE_BUILD_POLICY is not set CONFIG_IMA_APPRAISE_BOOTPARAM=y CONFIG_IMA_APPRAISE_MODSIG=y # CONFIG_IMA_KEYRINGS_PERMIT_SIGNED_BY_BUILTIN_OR_SECONDARY is not set # CONFIG_IMA_BLACKLIST_KEYRING is not set # CONFIG_IMA_LOAD_X509 is not set CONFIG_IMA_MEASURE_ASYMMETRIC_KEYS=y CONFIG_IMA_QUEUE_EARLY_BOOT_KEYS=y CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT=y # CONFIG_IMA_DISABLE_HTABLE is not set CONFIG_EVM=y CONFIG_EVM_ATTR_FSUUID=y CONFIG_EVM_EXTRA_SMACK_XATTRS=y CONFIG_EVM_ADD_XATTRS=y # CONFIG_EVM_LOAD_X509 is not set # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_APPARMOR=y # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_LSM="landlock,lockdown,yama,integrity,apparmor" # # Kernel hardening options # # # Memory initialization # CONFIG_INIT_STACK_NONE=y CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y CONFIG_ZERO_CALL_USED_REGS=y # end of Memory initialization # # Hardening of kernel data structures # # CONFIG_LIST_HARDENED is not set # CONFIG_BUG_ON_DATA_CORRUPTION is not set # end of Hardening of kernel data structures CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options # end of Security options CONFIG_XOR_BLOCKS=m CONFIG_ASYNC_CORE=m CONFIG_ASYNC_MEMCPY=m CONFIG_ASYNC_XOR=m CONFIG_ASYNC_PQ=m CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_SIG=y CONFIG_CRYPTO_SIG2=y CONFIG_CRYPTO_SKCIPHER=y CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y CONFIG_CRYPTO_AKCIPHER2=y CONFIG_CRYPTO_AKCIPHER=y CONFIG_CRYPTO_KPP2=y CONFIG_CRYPTO_KPP=y CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_CRYPTD=m # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_SIMD=m # end of Crypto core or helper # # Public-key cryptography # CONFIG_CRYPTO_RSA=y CONFIG_CRYPTO_DH=y CONFIG_CRYPTO_DH_RFC7919_GROUPS=y CONFIG_CRYPTO_ECC=y CONFIG_CRYPTO_ECDH=y # CONFIG_CRYPTO_ECDSA is not set # CONFIG_CRYPTO_ECRDSA is not set # CONFIG_CRYPTO_CURVE25519 is not set # end of Public-key cryptography # # Block ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_AES_TI is not set # CONFIG_CRYPTO_ARIA is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SM4_GENERIC is not set # CONFIG_CRYPTO_TWOFISH is not set # end of Block ciphers # # Length-preserving ciphers and modes # # CONFIG_CRYPTO_ADIANTUM is not set # CONFIG_CRYPTO_CHACHA20 is not set CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_HCTR2 is not set # CONFIG_CRYPTO_KEYWRAP is not set # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set CONFIG_CRYPTO_XTS=y # end of Length-preserving ciphers and modes # # AEAD (authenticated encryption with associated data) ciphers # # CONFIG_CRYPTO_AEGIS128 is not set # CONFIG_CRYPTO_CHACHA20POLY1305 is not set # CONFIG_CRYPTO_CCM is not set CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_GENIV=y CONFIG_CRYPTO_SEQIV=y # CONFIG_CRYPTO_ECHAINIV is not set # CONFIG_CRYPTO_ESSIV is not set # end of AEAD (authenticated encryption with associated data) ciphers # # Hashes, digests, and MACs # CONFIG_CRYPTO_BLAKE2B=m # CONFIG_CRYPTO_CMAC is not set CONFIG_CRYPTO_GHASH=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_POLYVAL=m # CONFIG_CRYPTO_POLY1305 is not set # CONFIG_CRYPTO_RMD160 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_SHA3=y # CONFIG_CRYPTO_SM3_GENERIC is not set # CONFIG_CRYPTO_STREEBOG is not set # CONFIG_CRYPTO_VMAC is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_XCBC is not set CONFIG_CRYPTO_XXHASH=m # end of Hashes, digests, and MACs # # CRCs (cyclic redundancy checks) # CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_CRC32 is not set CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRC64_ROCKSOFT=y # end of CRCs (cyclic redundancy checks) # # Compression # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_842 is not set # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # CONFIG_CRYPTO_ZSTD is not set # end of Compression # # Random number generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DRBG_MENU=y CONFIG_CRYPTO_DRBG_HMAC=y CONFIG_CRYPTO_DRBG_HASH=y CONFIG_CRYPTO_DRBG_CTR=y CONFIG_CRYPTO_DRBG=y CONFIG_CRYPTO_JITTERENTROPY=y CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKS=64 CONFIG_CRYPTO_JITTERENTROPY_MEMORY_BLOCKSIZE=32 CONFIG_CRYPTO_JITTERENTROPY_OSR=1 CONFIG_CRYPTO_KDF800108_CTR=y # end of Random number generation # # Userspace interface # # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set # CONFIG_CRYPTO_USER_API_RNG is not set # CONFIG_CRYPTO_USER_API_AEAD is not set # end of Userspace interface CONFIG_CRYPTO_HASH_INFO=y # # Accelerated Cryptographic Algorithms for CPU (x86) # # CONFIG_CRYPTO_CURVE25519_X86 is not set CONFIG_CRYPTO_AES_NI_INTEL=m # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set # CONFIG_CRYPTO_DES3_EDE_X86_64 is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64 is not set # CONFIG_CRYPTO_CHACHA20_X86_64 is not set # CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set # CONFIG_CRYPTO_NHPOLY1305_SSE2 is not set # CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set CONFIG_CRYPTO_BLAKE2S_X86=y CONFIG_CRYPTO_POLYVAL_CLMUL_NI=m # CONFIG_CRYPTO_POLY1305_X86_64 is not set CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=y # CONFIG_CRYPTO_SM3_AVX_X86_64 is not set CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_CRC32_PCLMUL=m CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m # end of Accelerated Cryptographic Algorithms for CPU (x86) CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=y # CONFIG_CRYPTO_DEV_PADLOCK_AES is not set # CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set # CONFIG_CRYPTO_DEV_ATMEL_ECC is not set # CONFIG_CRYPTO_DEV_ATMEL_SHA204A is not set CONFIG_CRYPTO_DEV_CCP=y # CONFIG_CRYPTO_DEV_CCP_DD is not set # CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set # CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set # CONFIG_CRYPTO_DEV_QAT_C3XXX is not set # CONFIG_CRYPTO_DEV_QAT_C62X is not set # CONFIG_CRYPTO_DEV_QAT_4XXX is not set # CONFIG_CRYPTO_DEV_QAT_420XX is not set # CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set # CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set # CONFIG_CRYPTO_DEV_QAT_C62XVF is not set # CONFIG_CRYPTO_DEV_VIRTIO is not set # CONFIG_CRYPTO_DEV_SAFEXCEL is not set # CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_X509_CERTIFICATE_PARSER=y # CONFIG_PKCS8_PRIVATE_KEY_PARSER is not set CONFIG_PKCS7_MESSAGE_PARSER=y # CONFIG_PKCS7_TEST_KEY is not set CONFIG_SIGNED_PE_FILE_VERIFICATION=y # CONFIG_FIPS_SIGNATURE_SELFTEST is not set # # Certificates for signature checking # CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" CONFIG_MODULE_SIG_KEY_TYPE_RSA=y # CONFIG_MODULE_SIG_KEY_TYPE_ECDSA is not set CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" CONFIG_SYSTEM_EXTRA_CERTIFICATE=y CONFIG_SYSTEM_EXTRA_CERTIFICATE_SIZE=4096 CONFIG_SECONDARY_TRUSTED_KEYRING=y # CONFIG_SECONDARY_TRUSTED_KEYRING_SIGNED_BY_BUILTIN is not set CONFIG_SYSTEM_BLACKLIST_KEYRING=y CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" CONFIG_SYSTEM_REVOCATION_LIST=y CONFIG_SYSTEM_REVOCATION_KEYS="" # CONFIG_SYSTEM_BLACKLIST_AUTH_UPDATE is not set # end of Certificates for signature checking CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=m CONFIG_RAID6_PQ_BENCHMARK=y CONFIG_LINEAR_RANGES=y CONFIG_PACKING=y # CONFIG_PACKING_KUNIT_TEST is not set CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y # CONFIG_CORDIC is not set # CONFIG_PRIME_NUMBERS is not set CONFIG_RATIONAL=y CONFIG_GENERIC_IOMAP=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_HAS_FAST_MULTIPLIER=y CONFIG_ARCH_USE_SYM_ANNOTATIONS=y # # Crypto library routines # CONFIG_CRYPTO_LIB_UTILS=y CONFIG_CRYPTO_LIB_AES=y CONFIG_CRYPTO_LIB_AESCFB=y CONFIG_CRYPTO_LIB_GF128MUL=y CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y # CONFIG_CRYPTO_LIB_CHACHA is not set # CONFIG_CRYPTO_LIB_CURVE25519 is not set CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11 # CONFIG_CRYPTO_LIB_POLY1305 is not set # CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set CONFIG_CRYPTO_LIB_SHA1=y CONFIG_CRYPTO_LIB_SHA256=y # end of Crypto library routines CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC64_ROCKSOFT=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set CONFIG_CRC64=y # CONFIG_CRC4 is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m # CONFIG_CRC8 is not set CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_DECOMPRESS=y CONFIG_ZSTD_COMMON=y CONFIG_ZSTD_COMPRESS=y CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_ARM64=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_RISCV=y CONFIG_XZ_DEC_MICROLZMA=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y CONFIG_DECOMPRESS_ZSTD=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_INTERVAL_TREE=y CONFIG_XARRAY_MULTI=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y CONFIG_DMA_OPS_HELPERS=y CONFIG_NEED_SG_DMA_FLAGS=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y CONFIG_SWIOTLB=y CONFIG_SWIOTLB_DYNAMIC=y CONFIG_DMA_NEED_SYNC=y CONFIG_DMA_COHERENT_POOL=y # CONFIG_DMA_API_DEBUG is not set # CONFIG_DMA_MAP_BENCHMARK is not set CONFIG_SGL_ALLOC=y CONFIG_IOMMU_HELPER=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPUMASK_OFFSTACK=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y CONFIG_CLZ_TAB=y CONFIG_IRQ_POLL=y CONFIG_MPILIB=y CONFIG_SIGNATURE=y CONFIG_DIMLIB=y CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y CONFIG_HAVE_GENERIC_VDSO=y CONFIG_GENERIC_GETTIMEOFDAY=y CONFIG_GENERIC_VDSO_TIME_NS=y CONFIG_GENERIC_VDSO_OVERFLOW_PROTECT=y CONFIG_VDSO_GETRANDOM=y CONFIG_FONT_SUPPORT=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set CONFIG_FONT_ACORN_8x8=y # CONFIG_FONT_MINI_4x6 is not set CONFIG_FONT_6x10=y # CONFIG_FONT_10x18 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set CONFIG_FONT_TER16x32=y # CONFIG_FONT_6x8 is not set CONFIG_SG_POOL=y CONFIG_ARCH_HAS_PMEM_API=y CONFIG_MEMREGION=y CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y CONFIG_ARCH_HAS_COPY_MC=y CONFIG_ARCH_STACKWALK=y CONFIG_STACKDEPOT=y CONFIG_STACKDEPOT_MAX_FRAMES=64 CONFIG_SBITMAP=y # CONFIG_LWQ_TEST is not set # end of Library routines CONFIG_ASN1_ENCODER=y CONFIG_FIRMWARE_TABLE=y CONFIG_UNION_FIND=y # # Kernel hacking # # # printk and dmesg options # CONFIG_PRINTK_TIME=y # CONFIG_PRINTK_CALLER is not set # CONFIG_STACKTRACE_BUILD_ID is not set CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 CONFIG_CONSOLE_LOGLEVEL_QUIET=3 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 CONFIG_BOOT_PRINTK_DELAY=y CONFIG_DYNAMIC_DEBUG=y CONFIG_DYNAMIC_DEBUG_CORE=y CONFIG_SYMBOLIC_ERRNAME=y CONFIG_DEBUG_BUGVERBOSE=y # end of printk and dmesg options CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_MISC=y # # Compile-time checks and compiler options # CONFIG_DEBUG_INFO=y CONFIG_AS_HAS_NON_CONST_ULEB128=y # CONFIG_DEBUG_INFO_NONE is not set # CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT is not set # CONFIG_DEBUG_INFO_DWARF4 is not set CONFIG_DEBUG_INFO_DWARF5=y # CONFIG_DEBUG_INFO_REDUCED is not set CONFIG_DEBUG_INFO_COMPRESSED_NONE=y # CONFIG_DEBUG_INFO_COMPRESSED_ZLIB is not set # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_GDB_SCRIPTS=y CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set # CONFIG_HEADERS_INSTALL is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_SECTION_MISMATCH_WARN_ONLY=y # CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y CONFIG_OBJTOOL=y CONFIG_STACK_VALIDATION=y CONFIG_VMLINUX_MAP=y # CONFIG_BUILTIN_MODULE_RANGES is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # end of Compile-time checks and compiler options # # Generic Kernel Debugging Instruments # CONFIG_MAGIC_SYSRQ=y CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01b6 CONFIG_MAGIC_SYSRQ_SERIAL=y CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" CONFIG_DEBUG_FS=y CONFIG_DEBUG_FS_ALLOW_ALL=y # CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set # CONFIG_DEBUG_FS_ALLOW_NONE is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y CONFIG_KGDB_HONOUR_BLOCKLIST=y CONFIG_KGDB_SERIAL_CONSOLE=y # CONFIG_KGDB_TESTS is not set CONFIG_KGDB_LOW_LEVEL_TRAP=y CONFIG_KGDB_KDB=y CONFIG_KDB_DEFAULT_ENABLE=0x1 CONFIG_KDB_KEYBOARD=y CONFIG_KDB_CONTINUE_CATASTROPHIC=0 CONFIG_ARCH_HAS_EARLY_DEBUG=y CONFIG_ARCH_HAS_UBSAN=y CONFIG_UBSAN=y # CONFIG_UBSAN_TRAP is not set CONFIG_CC_HAS_UBSAN_BOUNDS_STRICT=y CONFIG_UBSAN_BOUNDS=y CONFIG_UBSAN_BOUNDS_STRICT=y CONFIG_UBSAN_SHIFT=y # CONFIG_UBSAN_DIV_ZERO is not set CONFIG_UBSAN_SIGNED_WRAP=y CONFIG_UBSAN_BOOL=y CONFIG_UBSAN_ENUM=y # CONFIG_UBSAN_ALIGNMENT is not set # CONFIG_TEST_UBSAN is not set CONFIG_HAVE_ARCH_KCSAN=y CONFIG_HAVE_KCSAN_COMPILER=y # CONFIG_KCSAN is not set # end of Generic Kernel Debugging Instruments # # Networking Debugging # # CONFIG_NET_DEV_REFCNT_TRACKER is not set # CONFIG_NET_NS_REFCNT_TRACKER is not set # CONFIG_DEBUG_NET is not set # CONFIG_DEBUG_NET_SMALL_RTNL is not set # end of Networking Debugging # # Memory Debugging # # CONFIG_PAGE_EXTENSION is not set # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_SLUB_DEBUG=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_PAGE_OWNER is not set # CONFIG_PAGE_TABLE_CHECK is not set CONFIG_PAGE_POISONING=y # CONFIG_DEBUG_PAGE_REF is not set # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_ARCH_HAS_DEBUG_WX=y CONFIG_DEBUG_WX=y CONFIG_GENERIC_PTDUMP=y CONFIG_PTDUMP_CORE=y # CONFIG_PTDUMP_DEBUGFS is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_PER_VMA_LOCK_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_SHRINKER_DEBUG is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_SCHED_STACK_END_CHECK=y CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VM_PGTABLE is not set CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y # CONFIG_DEBUG_VIRTUAL is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_PER_CPU_MAPS is not set # CONFIG_MEM_ALLOC_PROFILING is not set CONFIG_HAVE_ARCH_KASAN=y CONFIG_HAVE_ARCH_KASAN_VMALLOC=y CONFIG_CC_HAS_KASAN_GENERIC=y CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y # CONFIG_KASAN is not set CONFIG_HAVE_ARCH_KFENCE=y CONFIG_KFENCE=y CONFIG_KFENCE_SAMPLE_INTERVAL=0 CONFIG_KFENCE_NUM_OBJECTS=255 # CONFIG_KFENCE_DEFERRABLE is not set # CONFIG_KFENCE_STATIC_KEYS is not set CONFIG_KFENCE_STRESS_TEST_FAULTS=0 # CONFIG_KFENCE_KUNIT_TEST is not set CONFIG_HAVE_ARCH_KMSAN=y # end of Memory Debugging # CONFIG_DEBUG_SHIRQ is not set # # Debug Oops, Lockups and Hangs # # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_PANIC_TIMEOUT=0 CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y CONFIG_HARDLOCKUP_DETECTOR=y # CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY is not set CONFIG_HARDLOCKUP_DETECTOR_PERF=y # CONFIG_HARDLOCKUP_DETECTOR_BUDDY is not set # CONFIG_HARDLOCKUP_DETECTOR_ARCH is not set CONFIG_HARDLOCKUP_DETECTOR_COUNTS_HRTIMER=y CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set # CONFIG_WQ_WATCHDOG is not set CONFIG_WQ_CPU_INTENSIVE_REPORT=y # CONFIG_TEST_LOCKUP is not set # end of Debug Oops, Lockups and Hangs # # Scheduler Debugging # CONFIG_SCHED_DEBUG=y CONFIG_SCHED_INFO=y CONFIG_SCHEDSTATS=y # end of Scheduler Debugging # CONFIG_DEBUG_PREEMPT is not set # # Lock Debugging (spinlocks, mutexes, etc...) # CONFIG_LOCK_DEBUGGING_SUPPORT=y # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_LOCK_TORTURE_TEST is not set # CONFIG_WW_MUTEX_SELFTEST is not set # CONFIG_SCF_TORTURE_TEST is not set # CONFIG_CSD_LOCK_WAIT_DEBUG is not set # end of Lock Debugging (spinlocks, mutexes, etc...) CONFIG_NMI_CHECK_CPU=y # CONFIG_DEBUG_IRQFLAGS is not set CONFIG_STACKTRACE=y # CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set # CONFIG_DEBUG_KOBJECT is not set # # Debug kernel data structures # # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_PLIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_MAPLE_TREE is not set # end of Debug kernel data structures # # RCU Debugging # # CONFIG_RCU_SCALE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_REF_SCALE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0 CONFIG_RCU_CPU_STALL_CPUTIME=y # CONFIG_RCU_TRACE is not set # CONFIG_RCU_EQS_DEBUG is not set # end of RCU Debugging # CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set # CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set CONFIG_LATENCYTOP=y # CONFIG_DEBUG_CGROUP_REF is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_RETHOOK=y CONFIG_RETHOOK=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_RETVAL=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_OBJTOOL_MCOUNT=y CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y CONFIG_BUILDTIME_MCOUNT_SORT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_BOOTTIME_TRACING=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y CONFIG_FUNCTION_GRAPH_RETVAL=y # CONFIG_FUNCTION_GRAPH_RETADDR is not set CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y CONFIG_DYNAMIC_FTRACE_WITH_ARGS=y CONFIG_FPROBE=y CONFIG_FUNCTION_PROFILER=y CONFIG_STACK_TRACER=y # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set CONFIG_SCHED_TRACER=y CONFIG_HWLAT_TRACER=y CONFIG_OSNOISE_TRACER=y CONFIG_TIMERLAT_TRACER=y CONFIG_MMIOTRACE=y CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set CONFIG_BLK_DEV_IO_TRACE=y CONFIG_FPROBE_EVENTS=y CONFIG_KPROBE_EVENTS=y # CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set CONFIG_UPROBE_EVENTS=y CONFIG_BPF_EVENTS=y CONFIG_DYNAMIC_EVENTS=y CONFIG_PROBE_EVENTS=y CONFIG_BPF_KPROBE_OVERRIDE=y CONFIG_FTRACE_MCOUNT_RECORD=y CONFIG_FTRACE_MCOUNT_USE_CC=y CONFIG_TRACING_MAP=y CONFIG_SYNTH_EVENTS=y CONFIG_USER_EVENTS=y CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_EVENT_INJECT=y # CONFIG_TRACEPOINT_BENCHMARK is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_TRACE_EVAL_MAP_FILE is not set # CONFIG_FTRACE_RECORD_RECURSION is not set # CONFIG_FTRACE_VALIDATE_RCU_IS_WATCHING is not set # CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_FTRACE_SORT_STARTUP_TEST is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set # CONFIG_MMIOTRACE_TEST is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set # CONFIG_SYNTH_EVENT_GEN_TEST is not set # CONFIG_KPROBE_EVENT_GEN_TEST is not set # CONFIG_HIST_TRIGGERS_DEBUG is not set CONFIG_DA_MON_EVENTS=y CONFIG_DA_MON_EVENTS_ID=y CONFIG_RV=y CONFIG_RV_MON_WWNR=y CONFIG_RV_REACTORS=y CONFIG_RV_REACT_PRINTK=y CONFIG_RV_REACT_PANIC=y # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set CONFIG_SAMPLES=y # CONFIG_SAMPLE_AUXDISPLAY is not set # CONFIG_SAMPLE_TRACE_EVENTS is not set # CONFIG_SAMPLE_TRACE_CUSTOM_EVENTS is not set # CONFIG_SAMPLE_TRACE_PRINTK is not set # CONFIG_SAMPLE_FTRACE_DIRECT is not set # CONFIG_SAMPLE_FTRACE_DIRECT_MULTI is not set # CONFIG_SAMPLE_FTRACE_OPS is not set # CONFIG_SAMPLE_TRACE_ARRAY is not set # CONFIG_SAMPLE_KOBJECT is not set # CONFIG_SAMPLE_KPROBES is not set # CONFIG_SAMPLE_HW_BREAKPOINT is not set # CONFIG_SAMPLE_FPROBE is not set # CONFIG_SAMPLE_KFIFO is not set # CONFIG_SAMPLE_KDB is not set # CONFIG_SAMPLE_LIVEPATCH is not set # CONFIG_SAMPLE_CONFIGFS is not set # CONFIG_SAMPLE_VFIO_MDEV_MDPY_FB is not set # CONFIG_SAMPLE_WATCHDOG is not set # # DAMON Samples # # end of DAMON Samples CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y CONFIG_STRICT_DEVMEM=y # CONFIG_IO_STRICT_DEVMEM is not set # # x86 Debugging # CONFIG_EARLY_PRINTK_USB=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y CONFIG_EARLY_PRINTK_USB_XDBC=y # CONFIG_EFI_PGT_DUMP is not set # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_DEBUG is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y # CONFIG_X86_DECODER_SELFTEST is not set # CONFIG_IO_DELAY_0X80 is not set CONFIG_IO_DELAY_0XED=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set # CONFIG_DEBUG_ENTRY is not set # CONFIG_DEBUG_NMI_SELFTEST is not set CONFIG_X86_DEBUG_FPU=y # CONFIG_PUNIT_ATOM_DEBUG is not set # CONFIG_UNWINDER_ORC is not set CONFIG_UNWINDER_FRAME_POINTER=y # end of x86 Debugging # # Kernel Testing and Coverage # CONFIG_KUNIT=y # CONFIG_KUNIT_DEBUGFS is not set # CONFIG_KUNIT_TEST is not set # CONFIG_KUNIT_EXAMPLE_TEST is not set # CONFIG_KUNIT_ALL_TESTS is not set CONFIG_KUNIT_DEFAULT_ENABLED=y # CONFIG_NOTIFIER_ERROR_INJECTION is not set CONFIG_FUNCTION_ERROR_INJECTION=y # CONFIG_FAULT_INJECTION is not set CONFIG_ARCH_HAS_KCOV=y CONFIG_CC_HAS_SANCOV_TRACE_PC=y # CONFIG_KCOV is not set CONFIG_RUNTIME_TESTING_MENU=y # CONFIG_TEST_DHRY is not set # CONFIG_LKDTM is not set # CONFIG_CPUMASK_KUNIT_TEST is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_TEST_MIN_HEAP is not set # CONFIG_TEST_SORT is not set # CONFIG_TEST_DIV64 is not set # CONFIG_TEST_MULDIV64 is not set # CONFIG_TEST_IOV_ITER is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_FPROBE_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_TEST_REF_TRACKER is not set # CONFIG_RBTREE_TEST is not set # CONFIG_REED_SOLOMON_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_PERCPU_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_ASYNC_RAID6_TEST is not set # CONFIG_TEST_HEXDUMP is not set # CONFIG_STRING_KUNIT_TEST is not set # CONFIG_STRING_HELPERS_KUNIT_TEST is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_TEST_PRINTF is not set # CONFIG_TEST_SCANF is not set # CONFIG_TEST_BITMAP is not set # CONFIG_TEST_UUID is not set # CONFIG_XARRAY_KUNIT is not set # CONFIG_TEST_MAPLE_TREE is not set # CONFIG_TEST_RHASHTABLE is not set # CONFIG_TEST_IDA is not set # CONFIG_TEST_LKM is not set # CONFIG_TEST_BITOPS is not set # CONFIG_TEST_VMALLOC is not set # CONFIG_TEST_BPF is not set # CONFIG_TEST_BLACKHOLE_DEV is not set # CONFIG_FIND_BIT_BENCHMARK is not set # CONFIG_TEST_FIRMWARE is not set # CONFIG_TEST_SYSCTL is not set # CONFIG_BITFIELD_KUNIT is not set # CONFIG_CHECKSUM_KUNIT is not set # CONFIG_UTIL_MACROS_KUNIT is not set # CONFIG_HASH_KUNIT_TEST is not set # CONFIG_RESOURCE_KUNIT_TEST is not set # CONFIG_SYSCTL_KUNIT_TEST is not set # CONFIG_LIST_KUNIT_TEST is not set # CONFIG_HASHTABLE_KUNIT_TEST is not set # CONFIG_LINEAR_RANGES_TEST is not set # CONFIG_CMDLINE_KUNIT_TEST is not set # CONFIG_BITS_TEST is not set # CONFIG_SLUB_KUNIT_TEST is not set # CONFIG_RATIONAL_KUNIT_TEST is not set # CONFIG_MEMCPY_KUNIT_TEST is not set # CONFIG_IS_SIGNED_TYPE_KUNIT_TEST is not set # CONFIG_OVERFLOW_KUNIT_TEST is not set # CONFIG_STACKINIT_KUNIT_TEST is not set # CONFIG_FORTIFY_KUNIT_TEST is not set # CONFIG_HW_BREAKPOINT_KUNIT_TEST is not set # CONFIG_SIPHASH_KUNIT_TEST is not set # CONFIG_USERCOPY_KUNIT_TEST is not set # CONFIG_CRC16_KUNIT_TEST is not set # CONFIG_TEST_UDELAY is not set # CONFIG_TEST_STATIC_KEYS is not set # CONFIG_TEST_DYNAMIC_DEBUG is not set # CONFIG_TEST_KMOD is not set # CONFIG_TEST_KALLSYMS is not set # CONFIG_TEST_MEMCAT_P is not set # CONFIG_TEST_MEMINIT is not set # CONFIG_TEST_HMM is not set # CONFIG_TEST_FREE_PAGES is not set # CONFIG_TEST_FPU is not set # CONFIG_TEST_CLOCKSOURCE_WATCHDOG is not set # CONFIG_TEST_OBJPOOL is not set # CONFIG_INT_POW_TEST is not set # CONFIG_INT_SQRT_KUNIT_TEST is not set CONFIG_ARCH_USE_MEMTEST=y CONFIG_MEMTEST=y # end of Kernel Testing and Coverage # # Rust hacking # # end of Rust hacking # end of Kernel hacking ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 0:37 ` Hyeonggon Yoo @ 2025-01-20 2:16 ` Zi Yan 2025-01-20 2:37 ` Hyeonggon Yoo 0 siblings, 1 reply; 15+ messages in thread From: Zi Yan @ 2025-01-20 2:16 UTC (permalink / raw) To: Hyeonggon Yoo Cc: kernel_team, 42.hyeyoo, Bruno Faccini, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: > > > On 1/18/2025 4:09 AM, Zi Yan wrote: > > On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: > > > >> On 1/6/2025 9:06 PM, Bruno Faccini wrote: > >>> Current fake-numa implementation prevents new Numa > >>> nodes to be later hot-plugged by drivers. > >>> A common symptom of this limitation is the > >>> "node <X> was absent from the node_possible_map" > >>> message by associated warning in mm/memory_hotplug.c: > >>> add_memory_resource(). > >>> This comes from the lack of remapping in both > >>> pxm_to_node_map[] and node_to_pxm_map[] tables > >>> to take fake-numa nodes into account and thus > >>> triggers collisions with original and physical nodes > >>> only-mapping that had been determined from BIOS tables. > >>> This patch fixes this by doing the necessary node-ids > >>> translation in both pxm_to_node_map[]/node_to_pxm_map[] > >>> tables. > >>> node_distance[] table has also been fixed accordingly. > >>> > >>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> > >> > >> Hi Bruno, > >> > >> This commit causes WARN() and disables fakenuma > >> when I pass "numa=fake=4U" on my QEMU setup. > >> > >> Attaching WARN() log and git bisect log to help debugging. > > > > Is your VM getting 4 NUMA nodes at the end? > > No, it only gets node 0 at the end. Got it. > > > Can you also share your QEMU command line and your kernel config? > > The config is attached (fakenuma.config) > > QEMU command line: > $ qemu-system-x86_64 \ > -cpu host \ > -enable-kvm \ > -smp $(nproc) \ > -m 32G \ > -nographic \ > -kernel arch/x86/boot/bzImage \ > -initrd ../../rootfs.cpio.gz \ > -nic user,model=virtio-net-pci \ > -append "console=ttyS0 numa=fake=4U" > > > This can help Bruno reproduce the issue locally. At least, I > > cannot reproduce it on mm-everything-2025-01-16-23-18. > > Still reproduced on mm-everything-2025-01-18-04-55 with my setup. > > > I also > > notice that my VM does not have “No NUMA configuration found” > > (in your log) in its kernel log and that might explain > > why I could not reproduce it. > > Did you do NUMA configuration (-numa in QEMU) for your VM? > I didn't, but it's still expected to work 'cause it's fake numa. No. It seems that the "No NUMA configuration found" is caused by your qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not populated?). I used the patch below to emulate the situation and reproduced the issue. Since dummy_numa_init() is used when there is no underlying NUMA architecture, NUMA initialization fails, or NUMA is disabled on the command line (the last does not apply here), it should be properly handled. I will let Bruno look into it. Thank you for the info. diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c index 64e5cdb2460a..70dfd9bfb23f 100644 --- a/arch/x86/mm/numa.c +++ b/arch/x86/mm/numa.c @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) */ void __init x86_numa_init(void) { - if (!numa_off) { + if (0 && !numa_off) { #ifdef CONFIG_ACPI_NUMA if (!numa_init(x86_acpi_numa_init)) return; > >> > >> [WARN() splat] > >> > >> [ 0.009676] No NUMA configuration found > >> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] > >> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB > >> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) > >> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) > >> [ 0.009738] ------------[ cut here ]------------ > >> [ 0.009739] -1 max nid when expected 1 > >> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 > >> [ 0.009766] Modules linked in: > >> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 > >> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 > >> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 > >> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 > >> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 > >> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 > >> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > >> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 > >> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 > >> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 > >> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 > >> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > >> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 > >> [ 0.009788] Call Trace: > >> [ 0.009790] <TASK> > >> [ 0.009792] ? show_regs+0x71/0x90 > >> [ 0.009797] ? __warn+0x8d/0x150 > >> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 > >> [ 0.009802] ? report_bug+0x1ab/0x1c0 > >> [ 0.009805] ? fixup_exception+0x27/0x380 > >> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 > >> [ 0.009813] ? do_early_exception+0x28/0x90 > >> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a > >> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 > >> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 > >> [ 0.009828] numa_emulation+0x4e3/0xad0 > >> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 > >> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 > >> [ 0.009836] numa_memblks_init+0x10c/0x2c0 > >> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 > >> [ 0.009840] numa_init+0x61/0x3e0 > >> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 > >> [ 0.009846] x86_numa_init+0x65/0x80 > >> [ 0.009848] initmem_init+0xe/0x20 > >> [ 0.009850] setup_arch+0x9d8/0xfa0 > >> [ 0.009852] ? _printk+0x58/0x90 > >> [ 0.009855] start_kernel+0x5f/0xb50 > >> [ 0.009860] x86_64_start_reservations+0x18/0x30 > >> [ 0.009863] x86_64_start_kernel+0xc0/0x110 > >> [ 0.009864] ? setup_ghcb+0xe/0x140 > >> [ 0.009867] common_startup_64+0x13e/0x141 > >> [ 0.009871] </TASK> > >> [ 0.009871] ---[ end trace 0000000000000000 ]--- > >> > >> [Git bisect log] > >> > >> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() > >> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 > >> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) > >> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 > >> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper > >> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 > >> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD > >> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 > >> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device > >> git bisect bad 8646971f02651146554233d63fdd721f5f060973 > >> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action > >> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 > >> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file > >> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd > >> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface > >> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 > >> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface > >> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 > >> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak > >> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab > >> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > >> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d > >> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > >> > >>> --- > >>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ > >>> include/acpi/acpi_numa.h | 5 +++ > >>> include/linux/numa_memblks.h | 3 ++ > >>> mm/numa_emulation.c | 45 ++++++++++++++++--- > >>> mm/numa_memblks.c | 2 +- > >>> 5 files changed, 133 insertions(+), 8 deletions(-) > >>> > >>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > >>> index bec0dcd1f9c3..59fffe34c9d0 100644 > >>> --- a/drivers/acpi/numa/srat.c > >>> +++ b/drivers/acpi/numa/srat.c > >>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) > >>> } > >>> EXPORT_SYMBOL(acpi_map_pxm_to_node); > >>> +#ifdef CONFIG_NUMA_EMU > >>> +/* > >>> + * Take max_nid - 1 fake-numa nodes into account in both > >>> + * pxm_to_node_map()/node_to_pxm_map[] tables. > >>> + */ > >>> +int __init fix_pxm_node_maps(int max_nid) > >>> +{ > >>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata > >>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; > >>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata > >>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; > >>> + int i, j, index = -1, count = 0; > >>> + nodemask_t nodes_to_enable; > >>> + > >>> + if (numa_off || srat_disabled()) > >>> + return -1; > >>> + > >>> + /* find fake nodes PXM mapping */ > >>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>> + if (node_to_pxm_map[i] != PXM_INVAL) { > >>> + for (j = 0; j <= max_nid; j++) { > >>> + if ((emu_nid_to_phys[j] == i) && > >>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, > >>> + "Node %d is already binded to PXM %d\n", > >>> + j, node_to_pxm_map_copy[j])) > >>> + return -1; > >>> + if (emu_nid_to_phys[j] == i) { > >>> + node_to_pxm_map_copy[j] = > >>> + node_to_pxm_map[i]; > >>> + if (j > index) > >>> + index = j; > >>> + count++; > >>> + } > >>> + } > >>> + } > >>> + } > >>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", > >>> + index, max_nid)) > >>> + return -1; > >>> + > >>> + nodes_clear(nodes_to_enable); > >>> + > >>> + /* map phys nodes not used for fake nodes */ > >>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>> + if (node_to_pxm_map[i] != PXM_INVAL) { > >>> + for (j = 0; j <= max_nid; j++) > >>> + if (emu_nid_to_phys[j] == i) > >>> + break; > >>> + /* fake nodes PXM mapping has been done */ > >>> + if (j <= max_nid) > >>> + continue; > >>> + /* find first hole */ > >>> + for (j = 0; > >>> + j < MAX_NUMNODES && > >>> + node_to_pxm_map_copy[j] != PXM_INVAL; > >>> + j++) > >>> + ; > >>> + if (WARN(j == MAX_NUMNODES, > >>> + "Number of nodes exceeds MAX_NUMNODES\n")) > >>> + return -1; > >>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; > >>> + node_set(j, nodes_to_enable); > >>> + count++; > >>> + } > >>> + } > >>> + > >>> + /* creating reverse mapping in pxm_to_node_map[] */ > >>> + for (i = 0; i < MAX_NUMNODES; i++) > >>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && > >>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) > >>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; > >>> + > >>> + /* overwrite with new mapping */ > >>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; > >>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; > >>> + } > >>> + > >>> + /* enable other nodes found in PXM for hotplug */ > >>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); > >>> + > >>> + pr_debug("found %d total number of nodes\n", count); > >>> + return 0; > >>> +} > >>> +#endif > >>> + > >>> static void __init > >>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) > >>> { > >>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h > >>> index b5f594754a9e..99b960bd473c 100644 > >>> --- a/include/acpi/acpi_numa.h > >>> +++ b/include/acpi/acpi_numa.h > >>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); > >>> extern int acpi_map_pxm_to_node(int); > >>> extern unsigned char acpi_srat_revision; > >>> extern void disable_srat(void); > >>> +extern int fix_pxm_node_maps(int max_nid); > >>> extern void bad_srat(void); > >>> extern int srat_disabled(void); > >>> #else /* CONFIG_ACPI_NUMA */ > >>> +static inline int fix_pxm_node_maps(int max_nid) > >>> +{ > >>> + return 0; > >>> +} > >>> static inline void disable_srat(void) > >>> { > >>> } > >>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h > >>> index cfad6ce7e1bd..dd85613cdd86 100644 > >>> --- a/include/linux/numa_memblks.h > >>> +++ b/include/linux/numa_memblks.h > >>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); > >>> int __init numa_memblks_init(int (*init_func)(void), > >>> bool memblock_force_top_down); > >>> +extern int numa_distance_cnt; > >>> + > >>> #ifdef CONFIG_NUMA_EMU > >>> +extern int emu_nid_to_phys[MAX_NUMNODES]; > >>> int numa_emu_cmdline(char *str); > >>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, > >>> unsigned int nr_emu_nids); > >>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c > >>> index 031fb9961bf7..9d55679d99ce 100644 > >>> --- a/mm/numa_emulation.c > >>> +++ b/mm/numa_emulation.c > >>> @@ -8,11 +8,12 @@ > >>> #include <linux/memblock.h> > >>> #include <linux/numa_memblks.h> > >>> #include <asm/numa.h> > >>> +#include <acpi/acpi_numa.h> > >>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) > >>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) > >>> -static int emu_nid_to_phys[MAX_NUMNODES]; > >>> +int emu_nid_to_phys[MAX_NUMNODES]; > >>> static char *emu_cmdline __initdata; > >>> int __init numa_emu_cmdline(char *str) > >>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); > >>> int max_emu_nid, dfl_phys_nid; > >>> int i, j, ret; > >>> + nodemask_t physnode_mask = numa_nodes_parsed; > >>> if (!emu_cmdline) > >>> goto no_emu; > >>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>> * split the system RAM into N fake nodes. > >>> */ > >>> if (strchr(emu_cmdline, 'U')) { > >>> - nodemask_t physnode_mask = numa_nodes_parsed; > >>> unsigned long n; > >>> int nid = 0; > >>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>> */ > >>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); > >>> - /* commit */ > >>> - *numa_meminfo = ei; > >>> - > >>> /* Make sure numa_nodes_parsed only contains emulated nodes */ > >>> nodes_clear(numa_nodes_parsed); > >>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) > >>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>> ei.blk[i].nid != NUMA_NO_NODE) > >>> node_set(ei.blk[i].nid, numa_nodes_parsed); > >>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); > >>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision > >>> + * with faked numa nodes, particularly during later memory hotplug > >>> + * handling, and also update numa_nodes_parsed accordingly. > >>> + */ > >>> + ret = fix_pxm_node_maps(max_emu_nid); > >>> + if (ret < 0) > >>> + goto no_emu; > >>> + > >>> + /* commit */ > >>> + *numa_meminfo = ei; > >>> + > >>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); > >>> /* make sure all emulated nodes are mapped to a physical node */ > >>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > >>> + for (i = 0; i < max_emu_nid + 1; i++) > >>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) > >>> emu_nid_to_phys[i] = dfl_phys_nid; > >>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>> numa_set_distance(i, j, dist); > >>> } > >>> } > >>> + for (i = 0; i < numa_distance_cnt; i++) { > >>> + for (j = 0; j < numa_distance_cnt; j++) { > >>> + int physi, physj; > >>> + u8 dist; > >>> + > >>> + /* distance between fake nodes is already ok */ > >>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && > >>> + emu_nid_to_phys[j] != NUMA_NO_NODE) > >>> + continue; > >>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) > >>> + physi = emu_nid_to_phys[i]; > >>> + else > >>> + physi = i - max_emu_nid; > >>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) > >>> + physj = emu_nid_to_phys[j]; > >>> + else > >>> + physj = j - max_emu_nid; > >>> + dist = phys_dist[physi * numa_dist_cnt + physj]; > >>> + numa_set_distance(i, j, dist); > >>> + } > >>> + } > >>> /* free the copied physical distance table */ > >>> memblock_free(phys_dist, phys_size); > >>> return; > >>> no_emu: > >>> + numa_nodes_parsed = physnode_mask; > >>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ > >>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > >>> emu_nid_to_phys[i] = i; > >>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c > >>> index a3877e9bc878..ff4054f4334d 100644 > >>> --- a/mm/numa_memblks.c > >>> +++ b/mm/numa_memblks.c > >>> @@ -7,7 +7,7 @@ > >>> #include <linux/numa.h> > >>> #include <linux/numa_memblks.h> > >>> -static int numa_distance_cnt; > >>> +int numa_distance_cnt; > >>> static u8 *numa_distance; > >>> nodemask_t numa_nodes_parsed __initdata; > > > > > > Best Regards, > > Yan, Zi > > -- Best Regards, Yan, Zi ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 2:16 ` Zi Yan @ 2025-01-20 2:37 ` Hyeonggon Yoo 2025-01-20 3:27 ` Zi Yan 0 siblings, 1 reply; 15+ messages in thread From: Hyeonggon Yoo @ 2025-01-20 2:37 UTC (permalink / raw) To: Zi Yan Cc: kernel_team, 42.hyeyoo, Bruno Faccini, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak On 1/20/2025 11:16 AM, Zi Yan wrote: > On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: >> >> >> On 1/18/2025 4:09 AM, Zi Yan wrote: >>> On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: >>> >>>> On 1/6/2025 9:06 PM, Bruno Faccini wrote: >>>>> Current fake-numa implementation prevents new Numa >>>>> nodes to be later hot-plugged by drivers. >>>>> A common symptom of this limitation is the >>>>> "node <X> was absent from the node_possible_map" >>>>> message by associated warning in mm/memory_hotplug.c: >>>>> add_memory_resource(). >>>>> This comes from the lack of remapping in both >>>>> pxm_to_node_map[] and node_to_pxm_map[] tables >>>>> to take fake-numa nodes into account and thus >>>>> triggers collisions with original and physical nodes >>>>> only-mapping that had been determined from BIOS tables. >>>>> This patch fixes this by doing the necessary node-ids >>>>> translation in both pxm_to_node_map[]/node_to_pxm_map[] >>>>> tables. >>>>> node_distance[] table has also been fixed accordingly. >>>>> >>>>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> >>>> >>>> Hi Bruno, >>>> >>>> This commit causes WARN() and disables fakenuma >>>> when I pass "numa=fake=4U" on my QEMU setup. >>>> >>>> Attaching WARN() log and git bisect log to help debugging. >>> >>> Is your VM getting 4 NUMA nodes at the end? >> >> No, it only gets node 0 at the end. > > Got it. > >> >>> Can you also share your QEMU command line and your kernel config? >> >> The config is attached (fakenuma.config) >> >> QEMU command line: >> $ qemu-system-x86_64 \ >> -cpu host \ >> -enable-kvm \ >> -smp $(nproc) \ >> -m 32G \ >> -nographic \ >> -kernel arch/x86/boot/bzImage \ >> -initrd ../../rootfs.cpio.gz \ >> -nic user,model=virtio-net-pci \ >> -append "console=ttyS0 numa=fake=4U" >> >>> This can help Bruno reproduce the issue locally. At least, I >>> cannot reproduce it on mm-everything-2025-01-16-23-18. >> >> Still reproduced on mm-everything-2025-01-18-04-55 with my setup. >> >>> I also >>> notice that my VM does not have “No NUMA configuration found” >>> (in your log) in its kernel log and that might explain >>> why I could not reproduce it. >> >> Did you do NUMA configuration (-numa in QEMU) for your VM? >> I didn't, but it's still expected to work 'cause it's fake numa. > > No. It seems that the "No NUMA configuration found" is caused by your > qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not > populated?) FYI, Yes. ACPI SRAT is not populated. $ qemu-system-x86_64 --version QEMU emulator version 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.24) Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers > I used the patch below to emulate the situation and > reproduced the issue. Since dummy_numa_init() is used when there is > no underlying NUMA architecture, NUMA initialization fails, or NUMA > is disabled on the command line (the last does not apply here), > it should be properly handled. I will let Bruno look into it. > > Thank you for the info. > > diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c > index 64e5cdb2460a..70dfd9bfb23f 100644 > --- a/arch/x86/mm/numa.c > +++ b/arch/x86/mm/numa.c > @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) > */ > void __init x86_numa_init(void) > { > - if (!numa_off) { > + if (0 && !numa_off) { > #ifdef CONFIG_ACPI_NUMA > if (!numa_init(x86_acpi_numa_init)) > return; > >>>> >>>> [WARN() splat] >>>> >>>> [ 0.009676] No NUMA configuration found >>>> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] >>>> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB >>>> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) >>>> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) >>>> [ 0.009738] ------------[ cut here ]------------ >>>> [ 0.009739] -1 max nid when expected 1 >>>> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 >>>> [ 0.009766] Modules linked in: >>>> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 >>>> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 >>>> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 >>>> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 >>>> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 >>>> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 >>>> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 >>>> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 >>>> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 >>>> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 >>>> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 >>>> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 >>>> [ 0.009788] Call Trace: >>>> [ 0.009790] <TASK> >>>> [ 0.009792] ? show_regs+0x71/0x90 >>>> [ 0.009797] ? __warn+0x8d/0x150 >>>> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 >>>> [ 0.009802] ? report_bug+0x1ab/0x1c0 >>>> [ 0.009805] ? fixup_exception+0x27/0x380 >>>> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 >>>> [ 0.009813] ? do_early_exception+0x28/0x90 >>>> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a >>>> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 >>>> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 >>>> [ 0.009828] numa_emulation+0x4e3/0xad0 >>>> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 >>>> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 >>>> [ 0.009836] numa_memblks_init+0x10c/0x2c0 >>>> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 >>>> [ 0.009840] numa_init+0x61/0x3e0 >>>> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 >>>> [ 0.009846] x86_numa_init+0x65/0x80 >>>> [ 0.009848] initmem_init+0xe/0x20 >>>> [ 0.009850] setup_arch+0x9d8/0xfa0 >>>> [ 0.009852] ? _printk+0x58/0x90 >>>> [ 0.009855] start_kernel+0x5f/0xb50 >>>> [ 0.009860] x86_64_start_reservations+0x18/0x30 >>>> [ 0.009863] x86_64_start_kernel+0xc0/0x110 >>>> [ 0.009864] ? setup_ghcb+0xe/0x140 >>>> [ 0.009867] common_startup_64+0x13e/0x141 >>>> [ 0.009871] </TASK> >>>> [ 0.009871] ---[ end trace 0000000000000000 ]--- >>>> >>>> [Git bisect log] >>>> >>>> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() >>>> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 >>>> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) >>>> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 >>>> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper >>>> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 >>>> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD >>>> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 >>>> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device >>>> git bisect bad 8646971f02651146554233d63fdd721f5f060973 >>>> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action >>>> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 >>>> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file >>>> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd >>>> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface >>>> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 >>>> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface >>>> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 >>>> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak >>>> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab >>>> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d >>>> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>> >>>>> --- >>>>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ >>>>> include/acpi/acpi_numa.h | 5 +++ >>>>> include/linux/numa_memblks.h | 3 ++ >>>>> mm/numa_emulation.c | 45 ++++++++++++++++--- >>>>> mm/numa_memblks.c | 2 +- >>>>> 5 files changed, 133 insertions(+), 8 deletions(-) >>>>> >>>>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >>>>> index bec0dcd1f9c3..59fffe34c9d0 100644 >>>>> --- a/drivers/acpi/numa/srat.c >>>>> +++ b/drivers/acpi/numa/srat.c >>>>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >>>>> } >>>>> EXPORT_SYMBOL(acpi_map_pxm_to_node); >>>>> +#ifdef CONFIG_NUMA_EMU >>>>> +/* >>>>> + * Take max_nid - 1 fake-numa nodes into account in both >>>>> + * pxm_to_node_map()/node_to_pxm_map[] tables. >>>>> + */ >>>>> +int __init fix_pxm_node_maps(int max_nid) >>>>> +{ >>>>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >>>>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >>>>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >>>>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >>>>> + int i, j, index = -1, count = 0; >>>>> + nodemask_t nodes_to_enable; >>>>> + >>>>> + if (numa_off || srat_disabled()) >>>>> + return -1; >>>>> + >>>>> + /* find fake nodes PXM mapping */ >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>> + for (j = 0; j <= max_nid; j++) { >>>>> + if ((emu_nid_to_phys[j] == i) && >>>>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >>>>> + "Node %d is already binded to PXM %d\n", >>>>> + j, node_to_pxm_map_copy[j])) >>>>> + return -1; >>>>> + if (emu_nid_to_phys[j] == i) { >>>>> + node_to_pxm_map_copy[j] = >>>>> + node_to_pxm_map[i]; >>>>> + if (j > index) >>>>> + index = j; >>>>> + count++; >>>>> + } >>>>> + } >>>>> + } >>>>> + } >>>>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >>>>> + index, max_nid)) >>>>> + return -1; >>>>> + >>>>> + nodes_clear(nodes_to_enable); >>>>> + >>>>> + /* map phys nodes not used for fake nodes */ >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>> + for (j = 0; j <= max_nid; j++) >>>>> + if (emu_nid_to_phys[j] == i) >>>>> + break; >>>>> + /* fake nodes PXM mapping has been done */ >>>>> + if (j <= max_nid) >>>>> + continue; >>>>> + /* find first hole */ >>>>> + for (j = 0; >>>>> + j < MAX_NUMNODES && >>>>> + node_to_pxm_map_copy[j] != PXM_INVAL; >>>>> + j++) >>>>> + ; >>>>> + if (WARN(j == MAX_NUMNODES, >>>>> + "Number of nodes exceeds MAX_NUMNODES\n")) >>>>> + return -1; >>>>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >>>>> + node_set(j, nodes_to_enable); >>>>> + count++; >>>>> + } >>>>> + } >>>>> + >>>>> + /* creating reverse mapping in pxm_to_node_map[] */ >>>>> + for (i = 0; i < MAX_NUMNODES; i++) >>>>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) >>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >>>>> + >>>>> + /* overwrite with new mapping */ >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >>>>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >>>>> + } >>>>> + >>>>> + /* enable other nodes found in PXM for hotplug */ >>>>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); >>>>> + >>>>> + pr_debug("found %d total number of nodes\n", count); >>>>> + return 0; >>>>> +} >>>>> +#endif >>>>> + >>>>> static void __init >>>>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) >>>>> { >>>>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >>>>> index b5f594754a9e..99b960bd473c 100644 >>>>> --- a/include/acpi/acpi_numa.h >>>>> +++ b/include/acpi/acpi_numa.h >>>>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >>>>> extern int acpi_map_pxm_to_node(int); >>>>> extern unsigned char acpi_srat_revision; >>>>> extern void disable_srat(void); >>>>> +extern int fix_pxm_node_maps(int max_nid); >>>>> extern void bad_srat(void); >>>>> extern int srat_disabled(void); >>>>> #else /* CONFIG_ACPI_NUMA */ >>>>> +static inline int fix_pxm_node_maps(int max_nid) >>>>> +{ >>>>> + return 0; >>>>> +} >>>>> static inline void disable_srat(void) >>>>> { >>>>> } >>>>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h >>>>> index cfad6ce7e1bd..dd85613cdd86 100644 >>>>> --- a/include/linux/numa_memblks.h >>>>> +++ b/include/linux/numa_memblks.h >>>>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); >>>>> int __init numa_memblks_init(int (*init_func)(void), >>>>> bool memblock_force_top_down); >>>>> +extern int numa_distance_cnt; >>>>> + >>>>> #ifdef CONFIG_NUMA_EMU >>>>> +extern int emu_nid_to_phys[MAX_NUMNODES]; >>>>> int numa_emu_cmdline(char *str); >>>>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >>>>> unsigned int nr_emu_nids); >>>>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >>>>> index 031fb9961bf7..9d55679d99ce 100644 >>>>> --- a/mm/numa_emulation.c >>>>> +++ b/mm/numa_emulation.c >>>>> @@ -8,11 +8,12 @@ >>>>> #include <linux/memblock.h> >>>>> #include <linux/numa_memblks.h> >>>>> #include <asm/numa.h> >>>>> +#include <acpi/acpi_numa.h> >>>>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >>>>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) >>>>> -static int emu_nid_to_phys[MAX_NUMNODES]; >>>>> +int emu_nid_to_phys[MAX_NUMNODES]; >>>>> static char *emu_cmdline __initdata; >>>>> int __init numa_emu_cmdline(char *str) >>>>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); >>>>> int max_emu_nid, dfl_phys_nid; >>>>> int i, j, ret; >>>>> + nodemask_t physnode_mask = numa_nodes_parsed; >>>>> if (!emu_cmdline) >>>>> goto no_emu; >>>>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>> * split the system RAM into N fake nodes. >>>>> */ >>>>> if (strchr(emu_cmdline, 'U')) { >>>>> - nodemask_t physnode_mask = numa_nodes_parsed; >>>>> unsigned long n; >>>>> int nid = 0; >>>>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>> */ >>>>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >>>>> - /* commit */ >>>>> - *numa_meminfo = ei; >>>>> - >>>>> /* Make sure numa_nodes_parsed only contains emulated nodes */ >>>>> nodes_clear(numa_nodes_parsed); >>>>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >>>>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>> ei.blk[i].nid != NUMA_NO_NODE) >>>>> node_set(ei.blk[i].nid, numa_nodes_parsed); >>>>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); >>>>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision >>>>> + * with faked numa nodes, particularly during later memory hotplug >>>>> + * handling, and also update numa_nodes_parsed accordingly. >>>>> + */ >>>>> + ret = fix_pxm_node_maps(max_emu_nid); >>>>> + if (ret < 0) >>>>> + goto no_emu; >>>>> + >>>>> + /* commit */ >>>>> + *numa_meminfo = ei; >>>>> + >>>>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >>>>> /* make sure all emulated nodes are mapped to a physical node */ >>>>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>> + for (i = 0; i < max_emu_nid + 1; i++) >>>>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >>>>> emu_nid_to_phys[i] = dfl_phys_nid; >>>>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>> numa_set_distance(i, j, dist); >>>>> } >>>>> } >>>>> + for (i = 0; i < numa_distance_cnt; i++) { >>>>> + for (j = 0; j < numa_distance_cnt; j++) { >>>>> + int physi, physj; >>>>> + u8 dist; >>>>> + >>>>> + /* distance between fake nodes is already ok */ >>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >>>>> + emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>> + continue; >>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >>>>> + physi = emu_nid_to_phys[i]; >>>>> + else >>>>> + physi = i - max_emu_nid; >>>>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>> + physj = emu_nid_to_phys[j]; >>>>> + else >>>>> + physj = j - max_emu_nid; >>>>> + dist = phys_dist[physi * numa_dist_cnt + physj]; >>>>> + numa_set_distance(i, j, dist); >>>>> + } >>>>> + } >>>>> /* free the copied physical distance table */ >>>>> memblock_free(phys_dist, phys_size); >>>>> return; >>>>> no_emu: >>>>> + numa_nodes_parsed = physnode_mask; >>>>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ >>>>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>> emu_nid_to_phys[i] = i; >>>>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >>>>> index a3877e9bc878..ff4054f4334d 100644 >>>>> --- a/mm/numa_memblks.c >>>>> +++ b/mm/numa_memblks.c >>>>> @@ -7,7 +7,7 @@ >>>>> #include <linux/numa.h> >>>>> #include <linux/numa_memblks.h> >>>>> -static int numa_distance_cnt; >>>>> +int numa_distance_cnt; >>>>> static u8 *numa_distance; >>>>> nodemask_t numa_nodes_parsed __initdata; >>> >>> >>> Best Regards, >>> Yan, Zi >>> > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 2:37 ` Hyeonggon Yoo @ 2025-01-20 3:27 ` Zi Yan 2025-01-20 4:35 ` Hyeonggon Yoo 2025-01-20 8:11 ` Bruno Faccini 0 siblings, 2 replies; 15+ messages in thread From: Zi Yan @ 2025-01-20 3:27 UTC (permalink / raw) To: Hyeonggon Yoo Cc: kernel_team, 42.hyeyoo, Bruno Faccini, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak On Sun Jan 19, 2025 at 9:37 PM EST, Hyeonggon Yoo wrote: > > > On 1/20/2025 11:16 AM, Zi Yan wrote: > > On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: > >> > >> > >> On 1/18/2025 4:09 AM, Zi Yan wrote: > >>> On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: > >>> > >>>> On 1/6/2025 9:06 PM, Bruno Faccini wrote: > >>>>> Current fake-numa implementation prevents new Numa > >>>>> nodes to be later hot-plugged by drivers. > >>>>> A common symptom of this limitation is the > >>>>> "node <X> was absent from the node_possible_map" > >>>>> message by associated warning in mm/memory_hotplug.c: > >>>>> add_memory_resource(). > >>>>> This comes from the lack of remapping in both > >>>>> pxm_to_node_map[] and node_to_pxm_map[] tables > >>>>> to take fake-numa nodes into account and thus > >>>>> triggers collisions with original and physical nodes > >>>>> only-mapping that had been determined from BIOS tables. > >>>>> This patch fixes this by doing the necessary node-ids > >>>>> translation in both pxm_to_node_map[]/node_to_pxm_map[] > >>>>> tables. > >>>>> node_distance[] table has also been fixed accordingly. > >>>>> > >>>>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> > >>>> > >>>> Hi Bruno, > >>>> > >>>> This commit causes WARN() and disables fakenuma > >>>> when I pass "numa=fake=4U" on my QEMU setup. > >>>> > >>>> Attaching WARN() log and git bisect log to help debugging. > >>> > >>> Is your VM getting 4 NUMA nodes at the end? > >> > >> No, it only gets node 0 at the end. > > > > Got it. > > > >> > >>> Can you also share your QEMU command line and your kernel config? > >> > >> The config is attached (fakenuma.config) > >> > >> QEMU command line: > >> $ qemu-system-x86_64 \ > >> -cpu host \ > >> -enable-kvm \ > >> -smp $(nproc) \ > >> -m 32G \ > >> -nographic \ > >> -kernel arch/x86/boot/bzImage \ > >> -initrd ../../rootfs.cpio.gz \ > >> -nic user,model=virtio-net-pci \ > >> -append "console=ttyS0 numa=fake=4U" > >> > >>> This can help Bruno reproduce the issue locally. At least, I > >>> cannot reproduce it on mm-everything-2025-01-16-23-18. > >> > >> Still reproduced on mm-everything-2025-01-18-04-55 with my setup. > >> > >>> I also > >>> notice that my VM does not have “No NUMA configuration found” > >>> (in your log) in its kernel log and that might explain > >>> why I could not reproduce it. > >> > >> Did you do NUMA configuration (-numa in QEMU) for your VM? > >> I didn't, but it's still expected to work 'cause it's fake numa. > > > > No. It seems that the "No NUMA configuration found" is caused by your > > qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not > > populated?) > > FYI, Yes. ACPI SRAT is not populated. > > $ qemu-system-x86_64 --version > QEMU emulator version 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.24) > Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers Basically, fix_pxm_node_maps() breaks fakenuma when it cannot fix the pxm_to_node_map() due to ACPI SRAT is missing. IMHO, it should let fakenuma proceed with a warning. The diff below fixed the issue locally, but Bruno can tell if I miss anything. diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c index 59fffe34c9d0..18d04f054e93 100644 --- a/drivers/acpi/numa/srat.c +++ b/drivers/acpi/numa/srat.c @@ -95,9 +95,12 @@ int __init fix_pxm_node_maps(int max_nid) int i, j, index = -1, count = 0; nodemask_t nodes_to_enable; - if (numa_off || srat_disabled()) + if (numa_off) return -1; + if (srat_disabled()) + return 0; + /* find fake nodes PXM mapping */ for (i = 0; i < MAX_NUMNODES; i++) { if (node_to_pxm_map[i] != PXM_INVAL) { @@ -117,9 +120,9 @@ int __init fix_pxm_node_maps(int max_nid) } } } - if (WARN(index != max_nid, "%d max nid when expected %d\n", - index, max_nid)) - return -1; + /* No srat data */ + if (index != max_nid) + return 0; nodes_clear(nodes_to_enable); > > > I used the patch below to emulate the situation and > > reproduced the issue. Since dummy_numa_init() is used when there is > > no underlying NUMA architecture, NUMA initialization fails, or NUMA > > is disabled on the command line (the last does not apply here), > > it should be properly handled. I will let Bruno look into it. > > > > Thank you for the info. > > > > diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c > > index 64e5cdb2460a..70dfd9bfb23f 100644 > > --- a/arch/x86/mm/numa.c > > +++ b/arch/x86/mm/numa.c > > @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) > > */ > > void __init x86_numa_init(void) > > { > > - if (!numa_off) { > > + if (0 && !numa_off) { > > #ifdef CONFIG_ACPI_NUMA > > if (!numa_init(x86_acpi_numa_init)) > > return; > > > >>>> > >>>> [WARN() splat] > >>>> > >>>> [ 0.009676] No NUMA configuration found > >>>> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] > >>>> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB > >>>> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) > >>>> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) > >>>> [ 0.009738] ------------[ cut here ]------------ > >>>> [ 0.009739] -1 max nid when expected 1 > >>>> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 > >>>> [ 0.009766] Modules linked in: > >>>> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 > >>>> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 > >>>> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 > >>>> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 > >>>> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 > >>>> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 > >>>> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 > >>>> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 > >>>> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 > >>>> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 > >>>> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 > >>>> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > >>>> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 > >>>> [ 0.009788] Call Trace: > >>>> [ 0.009790] <TASK> > >>>> [ 0.009792] ? show_regs+0x71/0x90 > >>>> [ 0.009797] ? __warn+0x8d/0x150 > >>>> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 > >>>> [ 0.009802] ? report_bug+0x1ab/0x1c0 > >>>> [ 0.009805] ? fixup_exception+0x27/0x380 > >>>> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 > >>>> [ 0.009813] ? do_early_exception+0x28/0x90 > >>>> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a > >>>> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 > >>>> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 > >>>> [ 0.009828] numa_emulation+0x4e3/0xad0 > >>>> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 > >>>> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 > >>>> [ 0.009836] numa_memblks_init+0x10c/0x2c0 > >>>> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 > >>>> [ 0.009840] numa_init+0x61/0x3e0 > >>>> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 > >>>> [ 0.009846] x86_numa_init+0x65/0x80 > >>>> [ 0.009848] initmem_init+0xe/0x20 > >>>> [ 0.009850] setup_arch+0x9d8/0xfa0 > >>>> [ 0.009852] ? _printk+0x58/0x90 > >>>> [ 0.009855] start_kernel+0x5f/0xb50 > >>>> [ 0.009860] x86_64_start_reservations+0x18/0x30 > >>>> [ 0.009863] x86_64_start_kernel+0xc0/0x110 > >>>> [ 0.009864] ? setup_ghcb+0xe/0x140 > >>>> [ 0.009867] common_startup_64+0x13e/0x141 > >>>> [ 0.009871] </TASK> > >>>> [ 0.009871] ---[ end trace 0000000000000000 ]--- > >>>> > >>>> [Git bisect log] > >>>> > >>>> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() > >>>> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 > >>>> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) > >>>> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 > >>>> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper > >>>> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 > >>>> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD > >>>> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 > >>>> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device > >>>> git bisect bad 8646971f02651146554233d63fdd721f5f060973 > >>>> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action > >>>> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 > >>>> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file > >>>> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd > >>>> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface > >>>> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 > >>>> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface > >>>> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 > >>>> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak > >>>> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab > >>>> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > >>>> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d > >>>> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug > >>>> > >>>>> --- > >>>>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ > >>>>> include/acpi/acpi_numa.h | 5 +++ > >>>>> include/linux/numa_memblks.h | 3 ++ > >>>>> mm/numa_emulation.c | 45 ++++++++++++++++--- > >>>>> mm/numa_memblks.c | 2 +- > >>>>> 5 files changed, 133 insertions(+), 8 deletions(-) > >>>>> > >>>>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > >>>>> index bec0dcd1f9c3..59fffe34c9d0 100644 > >>>>> --- a/drivers/acpi/numa/srat.c > >>>>> +++ b/drivers/acpi/numa/srat.c > >>>>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) > >>>>> } > >>>>> EXPORT_SYMBOL(acpi_map_pxm_to_node); > >>>>> +#ifdef CONFIG_NUMA_EMU > >>>>> +/* > >>>>> + * Take max_nid - 1 fake-numa nodes into account in both > >>>>> + * pxm_to_node_map()/node_to_pxm_map[] tables. > >>>>> + */ > >>>>> +int __init fix_pxm_node_maps(int max_nid) > >>>>> +{ > >>>>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata > >>>>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; > >>>>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata > >>>>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; > >>>>> + int i, j, index = -1, count = 0; > >>>>> + nodemask_t nodes_to_enable; > >>>>> + > >>>>> + if (numa_off || srat_disabled()) > >>>>> + return -1; > >>>>> + > >>>>> + /* find fake nodes PXM mapping */ > >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { > >>>>> + for (j = 0; j <= max_nid; j++) { > >>>>> + if ((emu_nid_to_phys[j] == i) && > >>>>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, > >>>>> + "Node %d is already binded to PXM %d\n", > >>>>> + j, node_to_pxm_map_copy[j])) > >>>>> + return -1; > >>>>> + if (emu_nid_to_phys[j] == i) { > >>>>> + node_to_pxm_map_copy[j] = > >>>>> + node_to_pxm_map[i]; > >>>>> + if (j > index) > >>>>> + index = j; > >>>>> + count++; > >>>>> + } > >>>>> + } > >>>>> + } > >>>>> + } > >>>>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", > >>>>> + index, max_nid)) > >>>>> + return -1; > >>>>> + > >>>>> + nodes_clear(nodes_to_enable); > >>>>> + > >>>>> + /* map phys nodes not used for fake nodes */ > >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { > >>>>> + for (j = 0; j <= max_nid; j++) > >>>>> + if (emu_nid_to_phys[j] == i) > >>>>> + break; > >>>>> + /* fake nodes PXM mapping has been done */ > >>>>> + if (j <= max_nid) > >>>>> + continue; > >>>>> + /* find first hole */ > >>>>> + for (j = 0; > >>>>> + j < MAX_NUMNODES && > >>>>> + node_to_pxm_map_copy[j] != PXM_INVAL; > >>>>> + j++) > >>>>> + ; > >>>>> + if (WARN(j == MAX_NUMNODES, > >>>>> + "Number of nodes exceeds MAX_NUMNODES\n")) > >>>>> + return -1; > >>>>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; > >>>>> + node_set(j, nodes_to_enable); > >>>>> + count++; > >>>>> + } > >>>>> + } > >>>>> + > >>>>> + /* creating reverse mapping in pxm_to_node_map[] */ > >>>>> + for (i = 0; i < MAX_NUMNODES; i++) > >>>>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && > >>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) > >>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; > >>>>> + > >>>>> + /* overwrite with new mapping */ > >>>>> + for (i = 0; i < MAX_NUMNODES; i++) { > >>>>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; > >>>>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; > >>>>> + } > >>>>> + > >>>>> + /* enable other nodes found in PXM for hotplug */ > >>>>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); > >>>>> + > >>>>> + pr_debug("found %d total number of nodes\n", count); > >>>>> + return 0; > >>>>> +} > >>>>> +#endif > >>>>> + > >>>>> static void __init > >>>>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) > >>>>> { > >>>>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h > >>>>> index b5f594754a9e..99b960bd473c 100644 > >>>>> --- a/include/acpi/acpi_numa.h > >>>>> +++ b/include/acpi/acpi_numa.h > >>>>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); > >>>>> extern int acpi_map_pxm_to_node(int); > >>>>> extern unsigned char acpi_srat_revision; > >>>>> extern void disable_srat(void); > >>>>> +extern int fix_pxm_node_maps(int max_nid); > >>>>> extern void bad_srat(void); > >>>>> extern int srat_disabled(void); > >>>>> #else /* CONFIG_ACPI_NUMA */ > >>>>> +static inline int fix_pxm_node_maps(int max_nid) > >>>>> +{ > >>>>> + return 0; > >>>>> +} > >>>>> static inline void disable_srat(void) > >>>>> { > >>>>> } > >>>>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h > >>>>> index cfad6ce7e1bd..dd85613cdd86 100644 > >>>>> --- a/include/linux/numa_memblks.h > >>>>> +++ b/include/linux/numa_memblks.h > >>>>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); > >>>>> int __init numa_memblks_init(int (*init_func)(void), > >>>>> bool memblock_force_top_down); > >>>>> +extern int numa_distance_cnt; > >>>>> + > >>>>> #ifdef CONFIG_NUMA_EMU > >>>>> +extern int emu_nid_to_phys[MAX_NUMNODES]; > >>>>> int numa_emu_cmdline(char *str); > >>>>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, > >>>>> unsigned int nr_emu_nids); > >>>>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c > >>>>> index 031fb9961bf7..9d55679d99ce 100644 > >>>>> --- a/mm/numa_emulation.c > >>>>> +++ b/mm/numa_emulation.c > >>>>> @@ -8,11 +8,12 @@ > >>>>> #include <linux/memblock.h> > >>>>> #include <linux/numa_memblks.h> > >>>>> #include <asm/numa.h> > >>>>> +#include <acpi/acpi_numa.h> > >>>>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) > >>>>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) > >>>>> -static int emu_nid_to_phys[MAX_NUMNODES]; > >>>>> +int emu_nid_to_phys[MAX_NUMNODES]; > >>>>> static char *emu_cmdline __initdata; > >>>>> int __init numa_emu_cmdline(char *str) > >>>>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>>>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); > >>>>> int max_emu_nid, dfl_phys_nid; > >>>>> int i, j, ret; > >>>>> + nodemask_t physnode_mask = numa_nodes_parsed; > >>>>> if (!emu_cmdline) > >>>>> goto no_emu; > >>>>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>>>> * split the system RAM into N fake nodes. > >>>>> */ > >>>>> if (strchr(emu_cmdline, 'U')) { > >>>>> - nodemask_t physnode_mask = numa_nodes_parsed; > >>>>> unsigned long n; > >>>>> int nid = 0; > >>>>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>>>> */ > >>>>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); > >>>>> - /* commit */ > >>>>> - *numa_meminfo = ei; > >>>>> - > >>>>> /* Make sure numa_nodes_parsed only contains emulated nodes */ > >>>>> nodes_clear(numa_nodes_parsed); > >>>>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) > >>>>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>>>> ei.blk[i].nid != NUMA_NO_NODE) > >>>>> node_set(ei.blk[i].nid, numa_nodes_parsed); > >>>>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); > >>>>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision > >>>>> + * with faked numa nodes, particularly during later memory hotplug > >>>>> + * handling, and also update numa_nodes_parsed accordingly. > >>>>> + */ > >>>>> + ret = fix_pxm_node_maps(max_emu_nid); > >>>>> + if (ret < 0) > >>>>> + goto no_emu; > >>>>> + > >>>>> + /* commit */ > >>>>> + *numa_meminfo = ei; > >>>>> + > >>>>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); > >>>>> /* make sure all emulated nodes are mapped to a physical node */ > >>>>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > >>>>> + for (i = 0; i < max_emu_nid + 1; i++) > >>>>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) > >>>>> emu_nid_to_phys[i] = dfl_phys_nid; > >>>>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) > >>>>> numa_set_distance(i, j, dist); > >>>>> } > >>>>> } > >>>>> + for (i = 0; i < numa_distance_cnt; i++) { > >>>>> + for (j = 0; j < numa_distance_cnt; j++) { > >>>>> + int physi, physj; > >>>>> + u8 dist; > >>>>> + > >>>>> + /* distance between fake nodes is already ok */ > >>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && > >>>>> + emu_nid_to_phys[j] != NUMA_NO_NODE) > >>>>> + continue; > >>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) > >>>>> + physi = emu_nid_to_phys[i]; > >>>>> + else > >>>>> + physi = i - max_emu_nid; > >>>>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) > >>>>> + physj = emu_nid_to_phys[j]; > >>>>> + else > >>>>> + physj = j - max_emu_nid; > >>>>> + dist = phys_dist[physi * numa_dist_cnt + physj]; > >>>>> + numa_set_distance(i, j, dist); > >>>>> + } > >>>>> + } > >>>>> /* free the copied physical distance table */ > >>>>> memblock_free(phys_dist, phys_size); > >>>>> return; > >>>>> no_emu: > >>>>> + numa_nodes_parsed = physnode_mask; > >>>>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ > >>>>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) > >>>>> emu_nid_to_phys[i] = i; > >>>>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c > >>>>> index a3877e9bc878..ff4054f4334d 100644 > >>>>> --- a/mm/numa_memblks.c > >>>>> +++ b/mm/numa_memblks.c > >>>>> @@ -7,7 +7,7 @@ > >>>>> #include <linux/numa.h> > >>>>> #include <linux/numa_memblks.h> > >>>>> -static int numa_distance_cnt; > >>>>> +int numa_distance_cnt; > >>>>> static u8 *numa_distance; > >>>>> nodemask_t numa_nodes_parsed __initdata; > >>> > >>> > >>> Best Regards, > >>> Yan, Zi > >>> > > > > > > > > -- Best Regards, Yan, Zi ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 3:27 ` Zi Yan @ 2025-01-20 4:35 ` Hyeonggon Yoo 2025-01-20 8:11 ` Bruno Faccini 1 sibling, 0 replies; 15+ messages in thread From: Hyeonggon Yoo @ 2025-01-20 4:35 UTC (permalink / raw) To: Zi Yan Cc: kernel_team, 42.hyeyoo, Bruno Faccini, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak On 1/20/2025 12:27 PM, Zi Yan wrote: > On Sun Jan 19, 2025 at 9:37 PM EST, Hyeonggon Yoo wrote: >> >> >> On 1/20/2025 11:16 AM, Zi Yan wrote: >>> On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: >>>> >>>> >>>> On 1/18/2025 4:09 AM, Zi Yan wrote: >>>>> On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: >>>>> >>>>>> On 1/6/2025 9:06 PM, Bruno Faccini wrote: >>>>>>> Current fake-numa implementation prevents new Numa >>>>>>> nodes to be later hot-plugged by drivers. >>>>>>> A common symptom of this limitation is the >>>>>>> "node <X> was absent from the node_possible_map" >>>>>>> message by associated warning in mm/memory_hotplug.c: >>>>>>> add_memory_resource(). >>>>>>> This comes from the lack of remapping in both >>>>>>> pxm_to_node_map[] and node_to_pxm_map[] tables >>>>>>> to take fake-numa nodes into account and thus >>>>>>> triggers collisions with original and physical nodes >>>>>>> only-mapping that had been determined from BIOS tables. >>>>>>> This patch fixes this by doing the necessary node-ids >>>>>>> translation in both pxm_to_node_map[]/node_to_pxm_map[] >>>>>>> tables. >>>>>>> node_distance[] table has also been fixed accordingly. >>>>>>> >>>>>>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> >>>>>> >>>>>> Hi Bruno, >>>>>> >>>>>> This commit causes WARN() and disables fakenuma >>>>>> when I pass "numa=fake=4U" on my QEMU setup. >>>>>> >>>>>> Attaching WARN() log and git bisect log to help debugging. >>>>> >>>>> Is your VM getting 4 NUMA nodes at the end? >>>> >>>> No, it only gets node 0 at the end. >>> >>> Got it. >>> >>>> >>>>> Can you also share your QEMU command line and your kernel config? >>>> >>>> The config is attached (fakenuma.config) >>>> >>>> QEMU command line: >>>> $ qemu-system-x86_64 \ >>>> -cpu host \ >>>> -enable-kvm \ >>>> -smp $(nproc) \ >>>> -m 32G \ >>>> -nographic \ >>>> -kernel arch/x86/boot/bzImage \ >>>> -initrd ../../rootfs.cpio.gz \ >>>> -nic user,model=virtio-net-pci \ >>>> -append "console=ttyS0 numa=fake=4U" >>>> >>>>> This can help Bruno reproduce the issue locally. At least, I >>>>> cannot reproduce it on mm-everything-2025-01-16-23-18. >>>> >>>> Still reproduced on mm-everything-2025-01-18-04-55 with my setup. >>>> >>>>> I also >>>>> notice that my VM does not have “No NUMA configuration found” >>>>> (in your log) in its kernel log and that might explain >>>>> why I could not reproduce it. >>>> >>>> Did you do NUMA configuration (-numa in QEMU) for your VM? >>>> I didn't, but it's still expected to work 'cause it's fake numa. >>> >>> No. It seems that the "No NUMA configuration found" is caused by your >>> qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not >>> populated?) >> >> FYI, Yes. ACPI SRAT is not populated. >> >> $ qemu-system-x86_64 --version >> QEMU emulator version 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.24) >> Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers > > Basically, fix_pxm_node_maps() breaks fakenuma when it cannot fix the > pxm_to_node_map() due to ACPI SRAT is missing. IMHO, it should let > fakenuma proceed with a warning. The diff below fixed the issue > locally, but Bruno can tell if I miss anything. > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > index 59fffe34c9d0..18d04f054e93 100644 > --- a/drivers/acpi/numa/srat.c > +++ b/drivers/acpi/numa/srat.c > @@ -95,9 +95,12 @@ int __init fix_pxm_node_maps(int max_nid) > int i, j, index = -1, count = 0; > nodemask_t nodes_to_enable; > > - if (numa_off || srat_disabled()) > + if (numa_off) > return -1; > > + if (srat_disabled()) > + return 0; > + > /* find fake nodes PXM mapping */ > for (i = 0; i < MAX_NUMNODES; i++) { > if (node_to_pxm_map[i] != PXM_INVAL) { > @@ -117,9 +120,9 @@ int __init fix_pxm_node_maps(int max_nid) > } > } > } > - if (WARN(index != max_nid, "%d max nid when expected %d\n", > - index, max_nid)) > - return -1; > + /* No srat data */ > + if (index != max_nid) > + return 0; > > nodes_clear(nodes_to_enable); Thanks, this fixes the bug on my environment as well. >> >>> I used the patch below to emulate the situation and >>> reproduced the issue. Since dummy_numa_init() is used when there is >>> no underlying NUMA architecture, NUMA initialization fails, or NUMA >>> is disabled on the command line (the last does not apply here), >>> it should be properly handled. I will let Bruno look into it. >>> >>> Thank you for the info. >>> >>> diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c >>> index 64e5cdb2460a..70dfd9bfb23f 100644 >>> --- a/arch/x86/mm/numa.c >>> +++ b/arch/x86/mm/numa.c >>> @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) >>> */ >>> void __init x86_numa_init(void) >>> { >>> - if (!numa_off) { >>> + if (0 && !numa_off) { >>> #ifdef CONFIG_ACPI_NUMA >>> if (!numa_init(x86_acpi_numa_init)) >>> return; >>> >>>>>> >>>>>> [WARN() splat] >>>>>> >>>>>> [ 0.009676] No NUMA configuration found >>>>>> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] >>>>>> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB >>>>>> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) >>>>>> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) >>>>>> [ 0.009738] ------------[ cut here ]------------ >>>>>> [ 0.009739] -1 max nid when expected 1 >>>>>> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009766] Modules linked in: >>>>>> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 >>>>>> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 >>>>>> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 >>>>>> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 >>>>>> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 >>>>>> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 >>>>>> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 >>>>>> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 >>>>>> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 >>>>>> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 >>>>>> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>>>> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 >>>>>> [ 0.009788] Call Trace: >>>>>> [ 0.009790] <TASK> >>>>>> [ 0.009792] ? show_regs+0x71/0x90 >>>>>> [ 0.009797] ? __warn+0x8d/0x150 >>>>>> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009802] ? report_bug+0x1ab/0x1c0 >>>>>> [ 0.009805] ? fixup_exception+0x27/0x380 >>>>>> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 >>>>>> [ 0.009813] ? do_early_exception+0x28/0x90 >>>>>> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a >>>>>> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 >>>>>> [ 0.009828] numa_emulation+0x4e3/0xad0 >>>>>> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009836] numa_memblks_init+0x10c/0x2c0 >>>>>> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009840] numa_init+0x61/0x3e0 >>>>>> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 >>>>>> [ 0.009846] x86_numa_init+0x65/0x80 >>>>>> [ 0.009848] initmem_init+0xe/0x20 >>>>>> [ 0.009850] setup_arch+0x9d8/0xfa0 >>>>>> [ 0.009852] ? _printk+0x58/0x90 >>>>>> [ 0.009855] start_kernel+0x5f/0xb50 >>>>>> [ 0.009860] x86_64_start_reservations+0x18/0x30 >>>>>> [ 0.009863] x86_64_start_kernel+0xc0/0x110 >>>>>> [ 0.009864] ? setup_ghcb+0xe/0x140 >>>>>> [ 0.009867] common_startup_64+0x13e/0x141 >>>>>> [ 0.009871] </TASK> >>>>>> [ 0.009871] ---[ end trace 0000000000000000 ]--- >>>>>> >>>>>> [Git bisect log] >>>>>> >>>>>> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() >>>>>> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 >>>>>> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) >>>>>> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 >>>>>> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper >>>>>> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 >>>>>> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD >>>>>> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 >>>>>> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device >>>>>> git bisect bad 8646971f02651146554233d63fdd721f5f060973 >>>>>> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action >>>>>> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 >>>>>> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file >>>>>> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd >>>>>> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface >>>>>> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 >>>>>> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface >>>>>> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 >>>>>> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak >>>>>> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab >>>>>> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>>>> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d >>>>>> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>>>> >>>>>>> --- >>>>>>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ >>>>>>> include/acpi/acpi_numa.h | 5 +++ >>>>>>> include/linux/numa_memblks.h | 3 ++ >>>>>>> mm/numa_emulation.c | 45 ++++++++++++++++--- >>>>>>> mm/numa_memblks.c | 2 +- >>>>>>> 5 files changed, 133 insertions(+), 8 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >>>>>>> index bec0dcd1f9c3..59fffe34c9d0 100644 >>>>>>> --- a/drivers/acpi/numa/srat.c >>>>>>> +++ b/drivers/acpi/numa/srat.c >>>>>>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >>>>>>> } >>>>>>> EXPORT_SYMBOL(acpi_map_pxm_to_node); >>>>>>> +#ifdef CONFIG_NUMA_EMU >>>>>>> +/* >>>>>>> + * Take max_nid - 1 fake-numa nodes into account in both >>>>>>> + * pxm_to_node_map()/node_to_pxm_map[] tables. >>>>>>> + */ >>>>>>> +int __init fix_pxm_node_maps(int max_nid) >>>>>>> +{ >>>>>>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >>>>>>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >>>>>>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >>>>>>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >>>>>>> + int i, j, index = -1, count = 0; >>>>>>> + nodemask_t nodes_to_enable; >>>>>>> + >>>>>>> + if (numa_off || srat_disabled()) >>>>>>> + return -1; >>>>>>> + >>>>>>> + /* find fake nodes PXM mapping */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>> + for (j = 0; j <= max_nid; j++) { >>>>>>> + if ((emu_nid_to_phys[j] == i) && >>>>>>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >>>>>>> + "Node %d is already binded to PXM %d\n", >>>>>>> + j, node_to_pxm_map_copy[j])) >>>>>>> + return -1; >>>>>>> + if (emu_nid_to_phys[j] == i) { >>>>>>> + node_to_pxm_map_copy[j] = >>>>>>> + node_to_pxm_map[i]; >>>>>>> + if (j > index) >>>>>>> + index = j; >>>>>>> + count++; >>>>>>> + } >>>>>>> + } >>>>>>> + } >>>>>>> + } >>>>>>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >>>>>>> + index, max_nid)) >>>>>>> + return -1; >>>>>>> + >>>>>>> + nodes_clear(nodes_to_enable); >>>>>>> + >>>>>>> + /* map phys nodes not used for fake nodes */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>> + for (j = 0; j <= max_nid; j++) >>>>>>> + if (emu_nid_to_phys[j] == i) >>>>>>> + break; >>>>>>> + /* fake nodes PXM mapping has been done */ >>>>>>> + if (j <= max_nid) >>>>>>> + continue; >>>>>>> + /* find first hole */ >>>>>>> + for (j = 0; >>>>>>> + j < MAX_NUMNODES && >>>>>>> + node_to_pxm_map_copy[j] != PXM_INVAL; >>>>>>> + j++) >>>>>>> + ; >>>>>>> + if (WARN(j == MAX_NUMNODES, >>>>>>> + "Number of nodes exceeds MAX_NUMNODES\n")) >>>>>>> + return -1; >>>>>>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >>>>>>> + node_set(j, nodes_to_enable); >>>>>>> + count++; >>>>>>> + } >>>>>>> + } >>>>>>> + >>>>>>> + /* creating reverse mapping in pxm_to_node_map[] */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) >>>>>>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) >>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >>>>>>> + >>>>>>> + /* overwrite with new mapping */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >>>>>>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >>>>>>> + } >>>>>>> + >>>>>>> + /* enable other nodes found in PXM for hotplug */ >>>>>>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); >>>>>>> + >>>>>>> + pr_debug("found %d total number of nodes\n", count); >>>>>>> + return 0; >>>>>>> +} >>>>>>> +#endif >>>>>>> + >>>>>>> static void __init >>>>>>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) >>>>>>> { >>>>>>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >>>>>>> index b5f594754a9e..99b960bd473c 100644 >>>>>>> --- a/include/acpi/acpi_numa.h >>>>>>> +++ b/include/acpi/acpi_numa.h >>>>>>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >>>>>>> extern int acpi_map_pxm_to_node(int); >>>>>>> extern unsigned char acpi_srat_revision; >>>>>>> extern void disable_srat(void); >>>>>>> +extern int fix_pxm_node_maps(int max_nid); >>>>>>> extern void bad_srat(void); >>>>>>> extern int srat_disabled(void); >>>>>>> #else /* CONFIG_ACPI_NUMA */ >>>>>>> +static inline int fix_pxm_node_maps(int max_nid) >>>>>>> +{ >>>>>>> + return 0; >>>>>>> +} >>>>>>> static inline void disable_srat(void) >>>>>>> { >>>>>>> } >>>>>>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h >>>>>>> index cfad6ce7e1bd..dd85613cdd86 100644 >>>>>>> --- a/include/linux/numa_memblks.h >>>>>>> +++ b/include/linux/numa_memblks.h >>>>>>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); >>>>>>> int __init numa_memblks_init(int (*init_func)(void), >>>>>>> bool memblock_force_top_down); >>>>>>> +extern int numa_distance_cnt; >>>>>>> + >>>>>>> #ifdef CONFIG_NUMA_EMU >>>>>>> +extern int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> int numa_emu_cmdline(char *str); >>>>>>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >>>>>>> unsigned int nr_emu_nids); >>>>>>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >>>>>>> index 031fb9961bf7..9d55679d99ce 100644 >>>>>>> --- a/mm/numa_emulation.c >>>>>>> +++ b/mm/numa_emulation.c >>>>>>> @@ -8,11 +8,12 @@ >>>>>>> #include <linux/memblock.h> >>>>>>> #include <linux/numa_memblks.h> >>>>>>> #include <asm/numa.h> >>>>>>> +#include <acpi/acpi_numa.h> >>>>>>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >>>>>>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) >>>>>>> -static int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> +int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> static char *emu_cmdline __initdata; >>>>>>> int __init numa_emu_cmdline(char *str) >>>>>>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); >>>>>>> int max_emu_nid, dfl_phys_nid; >>>>>>> int i, j, ret; >>>>>>> + nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>> if (!emu_cmdline) >>>>>>> goto no_emu; >>>>>>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> * split the system RAM into N fake nodes. >>>>>>> */ >>>>>>> if (strchr(emu_cmdline, 'U')) { >>>>>>> - nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>> unsigned long n; >>>>>>> int nid = 0; >>>>>>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> */ >>>>>>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >>>>>>> - /* commit */ >>>>>>> - *numa_meminfo = ei; >>>>>>> - >>>>>>> /* Make sure numa_nodes_parsed only contains emulated nodes */ >>>>>>> nodes_clear(numa_nodes_parsed); >>>>>>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >>>>>>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> ei.blk[i].nid != NUMA_NO_NODE) >>>>>>> node_set(ei.blk[i].nid, numa_nodes_parsed); >>>>>>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); >>>>>>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision >>>>>>> + * with faked numa nodes, particularly during later memory hotplug >>>>>>> + * handling, and also update numa_nodes_parsed accordingly. >>>>>>> + */ >>>>>>> + ret = fix_pxm_node_maps(max_emu_nid); >>>>>>> + if (ret < 0) >>>>>>> + goto no_emu; >>>>>>> + >>>>>>> + /* commit */ >>>>>>> + *numa_meminfo = ei; >>>>>>> + >>>>>>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >>>>>>> /* make sure all emulated nodes are mapped to a physical node */ >>>>>>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>> + for (i = 0; i < max_emu_nid + 1; i++) >>>>>>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >>>>>>> emu_nid_to_phys[i] = dfl_phys_nid; >>>>>>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> numa_set_distance(i, j, dist); >>>>>>> } >>>>>>> } >>>>>>> + for (i = 0; i < numa_distance_cnt; i++) { >>>>>>> + for (j = 0; j < numa_distance_cnt; j++) { >>>>>>> + int physi, physj; >>>>>>> + u8 dist; >>>>>>> + >>>>>>> + /* distance between fake nodes is already ok */ >>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >>>>>>> + emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>> + continue; >>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >>>>>>> + physi = emu_nid_to_phys[i]; >>>>>>> + else >>>>>>> + physi = i - max_emu_nid; >>>>>>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>> + physj = emu_nid_to_phys[j]; >>>>>>> + else >>>>>>> + physj = j - max_emu_nid; >>>>>>> + dist = phys_dist[physi * numa_dist_cnt + physj]; >>>>>>> + numa_set_distance(i, j, dist); >>>>>>> + } >>>>>>> + } >>>>>>> /* free the copied physical distance table */ >>>>>>> memblock_free(phys_dist, phys_size); >>>>>>> return; >>>>>>> no_emu: >>>>>>> + numa_nodes_parsed = physnode_mask; >>>>>>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ >>>>>>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>> emu_nid_to_phys[i] = i; >>>>>>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >>>>>>> index a3877e9bc878..ff4054f4334d 100644 >>>>>>> --- a/mm/numa_memblks.c >>>>>>> +++ b/mm/numa_memblks.c >>>>>>> @@ -7,7 +7,7 @@ >>>>>>> #include <linux/numa.h> >>>>>>> #include <linux/numa_memblks.h> >>>>>>> -static int numa_distance_cnt; >>>>>>> +int numa_distance_cnt; >>>>>>> static u8 *numa_distance; >>>>>>> nodemask_t numa_nodes_parsed __initdata; >>>>> >>>>> >>>>> Best Regards, >>>>> Yan, Zi >>>>> >>> >>> >>> >>> > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 3:27 ` Zi Yan 2025-01-20 4:35 ` Hyeonggon Yoo @ 2025-01-20 8:11 ` Bruno Faccini 2025-01-27 17:38 ` Bruno Faccini 1 sibling, 1 reply; 15+ messages in thread From: Bruno Faccini @ 2025-01-20 8:11 UTC (permalink / raw) To: Zi Yan, Hyeonggon Yoo Cc: kernel_team, 42.hyeyoo, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak Sorry for my late answer, I was out traveling. Le 20/01/2025 à 04:27, Zi Yan a écrit : > On Sun Jan 19, 2025 at 9:37 PM EST, Hyeonggon Yoo wrote: >> >> >> On 1/20/2025 11:16 AM, Zi Yan wrote: >>> On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: >>>> >>>> >>>> On 1/18/2025 4:09 AM, Zi Yan wrote: >>>>> On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: >>>>> >>>>>> On 1/6/2025 9:06 PM, Bruno Faccini wrote: >>>>>>> Current fake-numa implementation prevents new Numa >>>>>>> nodes to be later hot-plugged by drivers. >>>>>>> A common symptom of this limitation is the >>>>>>> "node <X> was absent from the node_possible_map" >>>>>>> message by associated warning in mm/memory_hotplug.c: >>>>>>> add_memory_resource(). >>>>>>> This comes from the lack of remapping in both >>>>>>> pxm_to_node_map[] and node_to_pxm_map[] tables >>>>>>> to take fake-numa nodes into account and thus >>>>>>> triggers collisions with original and physical nodes >>>>>>> only-mapping that had been determined from BIOS tables. >>>>>>> This patch fixes this by doing the necessary node-ids >>>>>>> translation in both pxm_to_node_map[]/node_to_pxm_map[] >>>>>>> tables. >>>>>>> node_distance[] table has also been fixed accordingly. >>>>>>> >>>>>>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> >>>>>> >>>>>> Hi Bruno, >>>>>> >>>>>> This commit causes WARN() and disables fakenuma >>>>>> when I pass "numa=fake=4U" on my QEMU setup. >>>>>> >>>>>> Attaching WARN() log and git bisect log to help debugging. >>>>> >>>>> Is your VM getting 4 NUMA nodes at the end? >>>> >>>> No, it only gets node 0 at the end. >>> >>> Got it. >>> Yes, it is expected that if something fails, we get back to the orig config. >>>> >>>>> Can you also share your QEMU command line and your kernel config? >>>> >>>> The config is attached (fakenuma.config) >>>> >>>> QEMU command line: >>>> $ qemu-system-x86_64 \ >>>> -cpu host \ >>>> -enable-kvm \ >>>> -smp $(nproc) \ >>>> -m 32G \ >>>> -nographic \ >>>> -kernel arch/x86/boot/bzImage \ >>>> -initrd ../../rootfs.cpio.gz \ >>>> -nic user,model=virtio-net-pci \ >>>> -append "console=ttyS0 numa=fake=4U" >>>> >>>>> This can help Bruno reproduce the issue locally. At least, I >>>>> cannot reproduce it on mm-everything-2025-01-16-23-18. >>>> >>>> Still reproduced on mm-everything-2025-01-18-04-55 with my setup. >>>> >>>>> I also >>>>> notice that my VM does not have “No NUMA configuration found” >>>>> (in your log) in its kernel log and that might explain >>>>> why I could not reproduce it. >>>> >>>> Did you do NUMA configuration (-numa in QEMU) for your VM? >>>> I didn't, but it's still expected to work 'cause it's fake numa. >>> >>> No. It seems that the "No NUMA configuration found" is caused by your >>> qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not >>> populated?) >> >> FYI, Yes. ACPI SRAT is not populated. >> >> $ qemu-system-x86_64 --version >> QEMU emulator version 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.24) >> Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers > > Basically, fix_pxm_node_maps() breaks fakenuma when it cannot fix the > pxm_to_node_map() due to ACPI SRAT is missing. IMHO, it should let > fakenuma proceed with a warning. The diff below fixed the issue > locally, but Bruno can tell if I miss anything. Right, I did not anticipate that SRAT information is not provided ... > > diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c > index 59fffe34c9d0..18d04f054e93 100644 > --- a/drivers/acpi/numa/srat.c > +++ b/drivers/acpi/numa/srat.c > @@ -95,9 +95,12 @@ int __init fix_pxm_node_maps(int max_nid) > int i, j, index = -1, count = 0; > nodemask_t nodes_to_enable; > > - if (numa_off || srat_disabled()) > + if (numa_off) > return -1; > > + if (srat_disabled()) > + return 0; > + > /* find fake nodes PXM mapping */ > for (i = 0; i < MAX_NUMNODES; i++) { > if (node_to_pxm_map[i] != PXM_INVAL) { > @@ -117,9 +120,9 @@ int __init fix_pxm_node_maps(int max_nid) > } > } > } > - if (WARN(index != max_nid, "%d max nid when expected %d\n", > - index, max_nid)) > - return -1; > + /* No srat data */ > + if (index != max_nid) > + return 0; > Yes, I also believe that removing the warning and return is the way to handle missing SRAT informations case. I will push a patch update later today. Many thanks to have done the necessary work to identify/fix this guys !!! > nodes_clear(nodes_to_enable); > >> >>> I used the patch below to emulate the situation and >>> reproduced the issue. Since dummy_numa_init() is used when there is >>> no underlying NUMA architecture, NUMA initialization fails, or NUMA >>> is disabled on the command line (the last does not apply here), >>> it should be properly handled. I will let Bruno look into it. >>> >>> Thank you for the info. >>> >>> diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c >>> index 64e5cdb2460a..70dfd9bfb23f 100644 >>> --- a/arch/x86/mm/numa.c >>> +++ b/arch/x86/mm/numa.c >>> @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) >>> */ >>> void __init x86_numa_init(void) >>> { >>> - if (!numa_off) { >>> + if (0 && !numa_off) { >>> #ifdef CONFIG_ACPI_NUMA >>> if (!numa_init(x86_acpi_numa_init)) >>> return; >>> >>>>>> >>>>>> [WARN() splat] >>>>>> >>>>>> [ 0.009676] No NUMA configuration found >>>>>> [ 0.009677] Faking a node at [mem 0x0000000000000000-0x000000083fffffff] >>>>>> [ 0.009705] Fake node size 16895MB too small, increasing to 16896MB >>>>>> [ 0.009708] Faking node 0 at [mem 0x0000000000001000-0x0000000420000fff] (16896MB) >>>>>> [ 0.009711] Faking node 1 at [mem 0x0000000420001000-0x000000083fffffff] (16895MB) >>>>>> [ 0.009738] ------------[ cut here ]------------ >>>>>> [ 0.009739] -1 max nid when expected 1 >>>>>> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/srat.c:120 fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009766] Modules linked in: >>>>>> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.13.0-rc6+ #31 >>>>>> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 >>>>>> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 a0 d8 d1 8d 44 89 >>>>>> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 ORIG_RAX: 0000000000000000 >>>>>> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: 0000000000000000 >>>>>> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 >>>>>> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: 0000000000000000 >>>>>> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 >>>>>> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: 0000000000000000 >>>>>> [ 0.009783] FS: 0000000000000000(0000) GS:ffffffff8de8c000(0000) knlGS:0000000000000000 >>>>>> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>>>> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: 00000000000200b0 >>>>>> [ 0.009788] Call Trace: >>>>>> [ 0.009790] <TASK> >>>>>> [ 0.009792] ? show_regs+0x71/0x90 >>>>>> [ 0.009797] ? __warn+0x8d/0x150 >>>>>> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009802] ? report_bug+0x1ab/0x1c0 >>>>>> [ 0.009805] ? fixup_exception+0x27/0x380 >>>>>> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 >>>>>> [ 0.009813] ? do_early_exception+0x28/0x90 >>>>>> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a >>>>>> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 >>>>>> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 >>>>>> [ 0.009828] numa_emulation+0x4e3/0xad0 >>>>>> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009836] numa_memblks_init+0x10c/0x2c0 >>>>>> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>> [ 0.009840] numa_init+0x61/0x3e0 >>>>>> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 >>>>>> [ 0.009846] x86_numa_init+0x65/0x80 >>>>>> [ 0.009848] initmem_init+0xe/0x20 >>>>>> [ 0.009850] setup_arch+0x9d8/0xfa0 >>>>>> [ 0.009852] ? _printk+0x58/0x90 >>>>>> [ 0.009855] start_kernel+0x5f/0xb50 >>>>>> [ 0.009860] x86_64_start_reservations+0x18/0x30 >>>>>> [ 0.009863] x86_64_start_kernel+0xc0/0x110 >>>>>> [ 0.009864] ? setup_ghcb+0xe/0x140 >>>>>> [ 0.009867] common_startup_64+0x13e/0x141 >>>>>> [ 0.009871] </TASK> >>>>>> [ 0.009871] ---[ end trace 0000000000000000 ]--- >>>>>> >>>>>> [Git bisect log] >>>>>> >>>>>> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() >>>>>> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 >>>>>> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix softlockup in __read_vmcore (part 2) >>>>>> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 >>>>>> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move common part of pagetable_*_ctor to helper >>>>>> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 >>>>>> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: remove old allocation path for HDD >>>>>> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 >>>>>> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip swapcache for swapin of synchronous swap device >>>>>> git bisect bad 8646971f02651146554233d63fdd721f5f060973 >>>>>> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/paddr: report filter-passed bytes back for DAMOS_STAT action >>>>>> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 >>>>>> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/damon: document per-region DAMOS filter-passed bytes stat file >>>>>> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd >>>>>> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/damon: remove tests for DAMON debugfs interface >>>>>> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 >>>>>> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: remove DAMON debugfs interface >>>>>> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 >>>>>> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: prevent double scanning of memmap by kmemleak >>>>>> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab >>>>>> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>>>> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d >>>>>> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: allow later numa node hotplug >>>>>> >>>>>>> --- >>>>>>> drivers/acpi/numa/srat.c | 86 ++++++++++++++++++++++++++++++++++++ >>>>>>> include/acpi/acpi_numa.h | 5 +++ >>>>>>> include/linux/numa_memblks.h | 3 ++ >>>>>>> mm/numa_emulation.c | 45 ++++++++++++++++--- >>>>>>> mm/numa_memblks.c | 2 +- >>>>>>> 5 files changed, 133 insertions(+), 8 deletions(-) >>>>>>> >>>>>>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >>>>>>> index bec0dcd1f9c3..59fffe34c9d0 100644 >>>>>>> --- a/drivers/acpi/numa/srat.c >>>>>>> +++ b/drivers/acpi/numa/srat.c >>>>>>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >>>>>>> } >>>>>>> EXPORT_SYMBOL(acpi_map_pxm_to_node); >>>>>>> +#ifdef CONFIG_NUMA_EMU >>>>>>> +/* >>>>>>> + * Take max_nid - 1 fake-numa nodes into account in both >>>>>>> + * pxm_to_node_map()/node_to_pxm_map[] tables. >>>>>>> + */ >>>>>>> +int __init fix_pxm_node_maps(int max_nid) >>>>>>> +{ >>>>>>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >>>>>>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >>>>>>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >>>>>>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >>>>>>> + int i, j, index = -1, count = 0; >>>>>>> + nodemask_t nodes_to_enable; >>>>>>> + >>>>>>> + if (numa_off || srat_disabled()) >>>>>>> + return -1; >>>>>>> + >>>>>>> + /* find fake nodes PXM mapping */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>> + for (j = 0; j <= max_nid; j++) { >>>>>>> + if ((emu_nid_to_phys[j] == i) && >>>>>>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >>>>>>> + "Node %d is already binded to PXM %d\n", >>>>>>> + j, node_to_pxm_map_copy[j])) >>>>>>> + return -1; >>>>>>> + if (emu_nid_to_phys[j] == i) { >>>>>>> + node_to_pxm_map_copy[j] = >>>>>>> + node_to_pxm_map[i]; >>>>>>> + if (j > index) >>>>>>> + index = j; >>>>>>> + count++; >>>>>>> + } >>>>>>> + } >>>>>>> + } >>>>>>> + } >>>>>>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >>>>>>> + index, max_nid)) >>>>>>> + return -1; >>>>>>> + >>>>>>> + nodes_clear(nodes_to_enable); >>>>>>> + >>>>>>> + /* map phys nodes not used for fake nodes */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>> + for (j = 0; j <= max_nid; j++) >>>>>>> + if (emu_nid_to_phys[j] == i) >>>>>>> + break; >>>>>>> + /* fake nodes PXM mapping has been done */ >>>>>>> + if (j <= max_nid) >>>>>>> + continue; >>>>>>> + /* find first hole */ >>>>>>> + for (j = 0; >>>>>>> + j < MAX_NUMNODES && >>>>>>> + node_to_pxm_map_copy[j] != PXM_INVAL; >>>>>>> + j++) >>>>>>> + ; >>>>>>> + if (WARN(j == MAX_NUMNODES, >>>>>>> + "Number of nodes exceeds MAX_NUMNODES\n")) >>>>>>> + return -1; >>>>>>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >>>>>>> + node_set(j, nodes_to_enable); >>>>>>> + count++; >>>>>>> + } >>>>>>> + } >>>>>>> + >>>>>>> + /* creating reverse mapping in pxm_to_node_map[] */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) >>>>>>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == NUMA_NO_NODE) >>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >>>>>>> + >>>>>>> + /* overwrite with new mapping */ >>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >>>>>>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >>>>>>> + } >>>>>>> + >>>>>>> + /* enable other nodes found in PXM for hotplug */ >>>>>>> + nodes_or(numa_nodes_parsed, nodes_to_enable, numa_nodes_parsed); >>>>>>> + >>>>>>> + pr_debug("found %d total number of nodes\n", count); >>>>>>> + return 0; >>>>>>> +} >>>>>>> +#endif >>>>>>> + >>>>>>> static void __init >>>>>>> acpi_table_print_srat_entry(struct acpi_subtable_header *header) >>>>>>> { >>>>>>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >>>>>>> index b5f594754a9e..99b960bd473c 100644 >>>>>>> --- a/include/acpi/acpi_numa.h >>>>>>> +++ b/include/acpi/acpi_numa.h >>>>>>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >>>>>>> extern int acpi_map_pxm_to_node(int); >>>>>>> extern unsigned char acpi_srat_revision; >>>>>>> extern void disable_srat(void); >>>>>>> +extern int fix_pxm_node_maps(int max_nid); >>>>>>> extern void bad_srat(void); >>>>>>> extern int srat_disabled(void); >>>>>>> #else /* CONFIG_ACPI_NUMA */ >>>>>>> +static inline int fix_pxm_node_maps(int max_nid) >>>>>>> +{ >>>>>>> + return 0; >>>>>>> +} >>>>>>> static inline void disable_srat(void) >>>>>>> { >>>>>>> } >>>>>>> diff --git a/include/linux/numa_memblks.h b/include/linux/numa_memblks.h >>>>>>> index cfad6ce7e1bd..dd85613cdd86 100644 >>>>>>> --- a/include/linux/numa_memblks.h >>>>>>> +++ b/include/linux/numa_memblks.h >>>>>>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct numa_meminfo *mi); >>>>>>> int __init numa_memblks_init(int (*init_func)(void), >>>>>>> bool memblock_force_top_down); >>>>>>> +extern int numa_distance_cnt; >>>>>>> + >>>>>>> #ifdef CONFIG_NUMA_EMU >>>>>>> +extern int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> int numa_emu_cmdline(char *str); >>>>>>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >>>>>>> unsigned int nr_emu_nids); >>>>>>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >>>>>>> index 031fb9961bf7..9d55679d99ce 100644 >>>>>>> --- a/mm/numa_emulation.c >>>>>>> +++ b/mm/numa_emulation.c >>>>>>> @@ -8,11 +8,12 @@ >>>>>>> #include <linux/memblock.h> >>>>>>> #include <linux/numa_memblks.h> >>>>>>> #include <asm/numa.h> >>>>>>> +#include <acpi/acpi_numa.h> >>>>>>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >>>>>>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - 1UL)) >>>>>>> -static int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> +int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>> static char *emu_cmdline __initdata; >>>>>>> int __init numa_emu_cmdline(char *str) >>>>>>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * sizeof(phys_dist[0]); >>>>>>> int max_emu_nid, dfl_phys_nid; >>>>>>> int i, j, ret; >>>>>>> + nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>> if (!emu_cmdline) >>>>>>> goto no_emu; >>>>>>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> * split the system RAM into N fake nodes. >>>>>>> */ >>>>>>> if (strchr(emu_cmdline, 'U')) { >>>>>>> - nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>> unsigned long n; >>>>>>> int nid = 0; >>>>>>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> */ >>>>>>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >>>>>>> - /* commit */ >>>>>>> - *numa_meminfo = ei; >>>>>>> - >>>>>>> /* Make sure numa_nodes_parsed only contains emulated nodes */ >>>>>>> nodes_clear(numa_nodes_parsed); >>>>>>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >>>>>>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> ei.blk[i].nid != NUMA_NO_NODE) >>>>>>> node_set(ei.blk[i].nid, numa_nodes_parsed); >>>>>>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, ARRAY_SIZE(emu_nid_to_phys)); >>>>>>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid collision >>>>>>> + * with faked numa nodes, particularly during later memory hotplug >>>>>>> + * handling, and also update numa_nodes_parsed accordingly. >>>>>>> + */ >>>>>>> + ret = fix_pxm_node_maps(max_emu_nid); >>>>>>> + if (ret < 0) >>>>>>> + goto no_emu; >>>>>>> + >>>>>>> + /* commit */ >>>>>>> + *numa_meminfo = ei; >>>>>>> + >>>>>>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >>>>>>> /* make sure all emulated nodes are mapped to a physical node */ >>>>>>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>> + for (i = 0; i < max_emu_nid + 1; i++) >>>>>>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >>>>>>> emu_nid_to_phys[i] = dfl_phys_nid; >>>>>>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>> numa_set_distance(i, j, dist); >>>>>>> } >>>>>>> } >>>>>>> + for (i = 0; i < numa_distance_cnt; i++) { >>>>>>> + for (j = 0; j < numa_distance_cnt; j++) { >>>>>>> + int physi, physj; >>>>>>> + u8 dist; >>>>>>> + >>>>>>> + /* distance between fake nodes is already ok */ >>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >>>>>>> + emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>> + continue; >>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >>>>>>> + physi = emu_nid_to_phys[i]; >>>>>>> + else >>>>>>> + physi = i - max_emu_nid; >>>>>>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>> + physj = emu_nid_to_phys[j]; >>>>>>> + else >>>>>>> + physj = j - max_emu_nid; >>>>>>> + dist = phys_dist[physi * numa_dist_cnt + physj]; >>>>>>> + numa_set_distance(i, j, dist); >>>>>>> + } >>>>>>> + } >>>>>>> /* free the copied physical distance table */ >>>>>>> memblock_free(phys_dist, phys_size); >>>>>>> return; >>>>>>> no_emu: >>>>>>> + numa_nodes_parsed = physnode_mask; >>>>>>> /* No emulation. Build identity emu_nid_to_phys[] for numa_add_cpu() */ >>>>>>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>> emu_nid_to_phys[i] = i; >>>>>>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >>>>>>> index a3877e9bc878..ff4054f4334d 100644 >>>>>>> --- a/mm/numa_memblks.c >>>>>>> +++ b/mm/numa_memblks.c >>>>>>> @@ -7,7 +7,7 @@ >>>>>>> #include <linux/numa.h> >>>>>>> #include <linux/numa_memblks.h> >>>>>>> -static int numa_distance_cnt; >>>>>>> +int numa_distance_cnt; >>>>>>> static u8 *numa_distance; >>>>>>> nodemask_t numa_nodes_parsed __initdata; >>>>> >>>>> >>>>> Best Regards, >>>>> Yan, Zi >>>>> >>> >>> >>> >>> > > > > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [fake numa not working] [PATCH 1/1] mm/fake-numa: allow later numa node hotplug 2025-01-20 8:11 ` Bruno Faccini @ 2025-01-27 17:38 ` Bruno Faccini 0 siblings, 0 replies; 15+ messages in thread From: Bruno Faccini @ 2025-01-27 17:38 UTC (permalink / raw) To: Zi Yan, Hyeonggon Yoo Cc: kernel_team, 42.hyeyoo, linux-kernel, linux-mm, akpm, rppt, david, jhubbard, mrusiniak Hello Hyeonggon Yoo and all, Just to let you know that I have just pushed a patch (very close to what Zi Yan had already proposed before) to fix this problem, you can find it at https://lore.kernel.org/linux-mm/20250127171623.1523171-1-bfaccini@nvidia.com/T/#u . I have tested it on similar platforms than yours and also have verified it do not introduce any regression using fake-numa feature nor against my original commit 63db8170bf34 (“mm/fake-numa: allow later numa node hotplug”) that had introduced this problem you have raised. Cheers, Bruno. Le 20/01/2025 à 09:11, Bruno Faccini a écrit : > Sorry for my late answer, I was out traveling. > > Le 20/01/2025 à 04:27, Zi Yan a écrit : >> On Sun Jan 19, 2025 at 9:37 PM EST, Hyeonggon Yoo wrote: >>> >>> >>> On 1/20/2025 11:16 AM, Zi Yan wrote: >>>> On Sun Jan 19, 2025 at 7:37 PM EST, Hyeonggon Yoo wrote: >>>>> >>>>> >>>>> On 1/18/2025 4:09 AM, Zi Yan wrote: >>>>>> On 17 Jan 2025, at 0:00, Hyeonggon Yoo wrote: >>>>>> >>>>>>> On 1/6/2025 9:06 PM, Bruno Faccini wrote: >>>>>>>> Current fake-numa implementation prevents new Numa >>>>>>>> nodes to be later hot-plugged by drivers. >>>>>>>> A common symptom of this limitation is the >>>>>>>> "node <X> was absent from the node_possible_map" >>>>>>>> message by associated warning in mm/memory_hotplug.c: >>>>>>>> add_memory_resource(). >>>>>>>> This comes from the lack of remapping in both >>>>>>>> pxm_to_node_map[] and node_to_pxm_map[] tables >>>>>>>> to take fake-numa nodes into account and thus >>>>>>>> triggers collisions with original and physical nodes >>>>>>>> only-mapping that had been determined from BIOS tables. >>>>>>>> This patch fixes this by doing the necessary node-ids >>>>>>>> translation in both pxm_to_node_map[]/node_to_pxm_map[] >>>>>>>> tables. >>>>>>>> node_distance[] table has also been fixed accordingly. >>>>>>>> >>>>>>>> Signed-off-by: Bruno Faccini <bfaccini@nvidia.com> >>>>>>> >>>>>>> Hi Bruno, >>>>>>> >>>>>>> This commit causes WARN() and disables fakenuma >>>>>>> when I pass "numa=fake=4U" on my QEMU setup. >>>>>>> >>>>>>> Attaching WARN() log and git bisect log to help debugging. >>>>>> >>>>>> Is your VM getting 4 NUMA nodes at the end? >>>>> >>>>> No, it only gets node 0 at the end. >>>> >>>> Got it. >>>> > Yes, it is expected that if something fails, we get back to the orig > config. > >>>>> >>>>>> Can you also share your QEMU command line and your kernel config? >>>>> >>>>> The config is attached (fakenuma.config) >>>>> >>>>> QEMU command line: >>>>> $ qemu-system-x86_64 \ >>>>> -cpu host \ >>>>> -enable-kvm \ >>>>> -smp $(nproc) \ >>>>> -m 32G \ >>>>> -nographic \ >>>>> -kernel arch/x86/boot/bzImage \ >>>>> -initrd ../../rootfs.cpio.gz \ >>>>> -nic user,model=virtio-net-pci \ >>>>> -append "console=ttyS0 numa=fake=4U" >>>>> >>>>>> This can help Bruno reproduce the issue locally. At least, I >>>>>> cannot reproduce it on mm-everything-2025-01-16-23-18. >>>>> >>>>> Still reproduced on mm-everything-2025-01-18-04-55 with my setup. >>>>> >>>>>> I also >>>>>> notice that my VM does not have “No NUMA configuration found” >>>>>> (in your log) in its kernel log and that might explain >>>>>> why I could not reproduce it. >>>>> >>>>> Did you do NUMA configuration (-numa in QEMU) for your VM? >>>>> I didn't, but it's still expected to work 'cause it's fake numa. >>>> >>>> No. It seems that the "No NUMA configuration found" is caused by your >>>> qemu, where dummy_numa_init() is used (maybe ACPI SRAT is not >>>> populated?) >>> >>> FYI, Yes. ACPI SRAT is not populated. >>> >>> $ qemu-system-x86_64 --version >>> QEMU emulator version 6.2.0 (Debian 1:6.2+dfsg-2ubuntu6.24) >>> Copyright (c) 2003-2021 Fabrice Bellard and the QEMU Project developers >> >> Basically, fix_pxm_node_maps() breaks fakenuma when it cannot fix the >> pxm_to_node_map() due to ACPI SRAT is missing. IMHO, it should let >> fakenuma proceed with a warning. The diff below fixed the issue >> locally, but Bruno can tell if I miss anything. > Right, I did not anticipate that SRAT information is not provided ... > >> >> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >> index 59fffe34c9d0..18d04f054e93 100644 >> --- a/drivers/acpi/numa/srat.c >> +++ b/drivers/acpi/numa/srat.c >> @@ -95,9 +95,12 @@ int __init fix_pxm_node_maps(int max_nid) >> int i, j, index = -1, count = 0; >> nodemask_t nodes_to_enable; >> - if (numa_off || srat_disabled()) >> + if (numa_off) >> return -1; >> + if (srat_disabled()) >> + return 0; >> + >> /* find fake nodes PXM mapping */ >> for (i = 0; i < MAX_NUMNODES; i++) { >> if (node_to_pxm_map[i] != PXM_INVAL) { >> @@ -117,9 +120,9 @@ int __init fix_pxm_node_maps(int max_nid) >> } >> } >> } >> - if (WARN(index != max_nid, "%d max nid when expected %d\n", >> - index, max_nid)) >> - return -1; >> + /* No srat data */ >> + if (index != max_nid) >> + return 0; > Yes, I also believe that removing the warning and return is the way to > handle missing SRAT informations case. > > I will push a patch update later today. > > Many thanks to have done the necessary work to identify/fix this guys !!! > >> nodes_clear(nodes_to_enable); >>> >>>> I used the patch below to emulate the situation and >>>> reproduced the issue. Since dummy_numa_init() is used when there is >>>> no underlying NUMA architecture, NUMA initialization fails, or NUMA >>>> is disabled on the command line (the last does not apply here), >>>> it should be properly handled. I will let Bruno look into it. >>>> >>>> Thank you for the info. >>>> >>>> diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c >>>> index 64e5cdb2460a..70dfd9bfb23f 100644 >>>> --- a/arch/x86/mm/numa.c >>>> +++ b/arch/x86/mm/numa.c >>>> @@ -223,7 +223,7 @@ static int __init dummy_numa_init(void) >>>> */ >>>> void __init x86_numa_init(void) >>>> { >>>> - if (!numa_off) { >>>> + if (0 && !numa_off) { >>>> #ifdef CONFIG_ACPI_NUMA >>>> if (!numa_init(x86_acpi_numa_init)) >>>> return; >>>> >>>>>>> >>>>>>> [WARN() splat] >>>>>>> >>>>>>> [ 0.009676] No NUMA configuration found >>>>>>> [ 0.009677] Faking a node at [mem >>>>>>> 0x0000000000000000-0x000000083fffffff] >>>>>>> [ 0.009705] Fake node size 16895MB too small, increasing to >>>>>>> 16896MB >>>>>>> [ 0.009708] Faking node 0 at [mem >>>>>>> 0x0000000000001000-0x0000000420000fff] (16896MB) >>>>>>> [ 0.009711] Faking node 1 at [mem >>>>>>> 0x0000000420001000-0x000000083fffffff] (16895MB) >>>>>>> [ 0.009738] ------------[ cut here ]------------ >>>>>>> [ 0.009739] -1 max nid when expected 1 >>>>>>> [ 0.009760] WARNING: CPU: 0 PID: 0 at drivers/acpi/numa/ >>>>>>> srat.c:120 fix_pxm_node_maps+0x577/0x810 >>>>>>> [ 0.009766] Modules linked in: >>>>>>> [ 0.009769] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted >>>>>>> 6.13.0-rc6+ #31 >>>>>>> [ 0.009771] Hardware name: QEMU Standard PC (i440FX + PIIX, >>>>>>> 1996), BIOS 1.15.0-1 04/01/2014 >>>>>>> [ 0.009772] RIP: 0010:fix_pxm_node_maps+0x577/0x810 >>>>>>> [ 0.009774] Code: 8b 85 40 ff ff ff 44 8b 8d 44 ff ff ff 8b 85 >>>>>>> 48 ff ff ff e9 83 fb ff ff 44 89 f2 44 89 ce 48 c7 c7 aa 2f 84 8d >>>>>>> e8 b9 71 01 fe <0f> 0b 41 b8 ff ff ff ff e9 ba fb ff ff 48 c7 c7 >>>>>>> a0 d8 d1 8d 44 89 >>>>>>> [ 0.009776] RSP: 0000:ffffffff8da03be0 EFLAGS: 00010046 >>>>>>> ORIG_RAX: 0000000000000000 >>>>>>> [ 0.009778] RAX: 0000000000000000 RBX: 0000000000000400 RCX: >>>>>>> 0000000000000000 >>>>>>> [ 0.009779] RDX: 0000000000000000 RSI: 0000000000000000 RDI: >>>>>>> 0000000000000000 >>>>>>> [ 0.009780] RBP: ffffffff8da03ca8 R08: 0000000000000000 R09: >>>>>>> 0000000000000000 >>>>>>> [ 0.009781] R10: 0000000000000000 R11: 0000000000000000 R12: >>>>>>> 0000000000000001 >>>>>>> [ 0.009782] R13: 00000000000007ff R14: 0000000000000001 R15: >>>>>>> 0000000000000000 >>>>>>> [ 0.009783] FS: 0000000000000000(0000) >>>>>>> GS:ffffffff8de8c000(0000) knlGS:0000000000000000 >>>>>>> [ 0.009784] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 >>>>>>> [ 0.009785] CR2: ffff90e4bde01000 CR3: 00000001bd03e000 CR4: >>>>>>> 00000000000200b0 >>>>>>> [ 0.009788] Call Trace: >>>>>>> [ 0.009790] <TASK> >>>>>>> [ 0.009792] ? show_regs+0x71/0x90 >>>>>>> [ 0.009797] ? __warn+0x8d/0x150 >>>>>>> [ 0.009799] ? fix_pxm_node_maps+0x577/0x810 >>>>>>> [ 0.009802] ? report_bug+0x1ab/0x1c0 >>>>>>> [ 0.009805] ? fixup_exception+0x27/0x380 >>>>>>> [ 0.009809] ? early_fixup_exception+0xa2/0xf0 >>>>>>> [ 0.009813] ? do_early_exception+0x28/0x90 >>>>>>> [ 0.009816] ? early_idt_handler_common+0x2f/0x3a >>>>>>> [ 0.009819] ? fix_pxm_node_maps+0x577/0x810 >>>>>>> [ 0.009822] ? numa_cleanup_meminfo+0x8c/0x5b0 >>>>>>> [ 0.009828] numa_emulation+0x4e3/0xad0 >>>>>>> [ 0.009830] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>>> [ 0.009833] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>>> [ 0.009836] numa_memblks_init+0x10c/0x2c0 >>>>>>> [ 0.009838] ? __pfx_dummy_numa_init+0x10/0x10 >>>>>>> [ 0.009840] numa_init+0x61/0x3e0 >>>>>>> [ 0.009842] ? topology_register_boot_apic+0x2a/0x40 >>>>>>> [ 0.009846] x86_numa_init+0x65/0x80 >>>>>>> [ 0.009848] initmem_init+0xe/0x20 >>>>>>> [ 0.009850] setup_arch+0x9d8/0xfa0 >>>>>>> [ 0.009852] ? _printk+0x58/0x90 >>>>>>> [ 0.009855] start_kernel+0x5f/0xb50 >>>>>>> [ 0.009860] x86_64_start_reservations+0x18/0x30 >>>>>>> [ 0.009863] x86_64_start_kernel+0xc0/0x110 >>>>>>> [ 0.009864] ? setup_ghcb+0xe/0x140 >>>>>>> [ 0.009867] common_startup_64+0x13e/0x141 >>>>>>> [ 0.009871] </TASK> >>>>>>> [ 0.009871] ---[ end trace 0000000000000000 ]--- >>>>>>> >>>>>>> [Git bisect log] >>>>>>> >>>>>>> # bad: [f378252a2168c2fbf8fc08b635061e5f6748c1f2] kasan: sw_tags: >>>>>>> use str_on_off() helper in kasan_init_sw_tags() >>>>>>> git bisect bad f378252a2168c2fbf8fc08b635061e5f6748c1f2 >>>>>>> # good: [cbc5dde0a461240046e8a41c43d7c3b76d5db952] fs/proc: fix >>>>>>> softlockup in __read_vmcore (part 2) >>>>>>> git bisect good cbc5dde0a461240046e8a41c43d7c3b76d5db952 >>>>>>> # good: [fb73203263021f2ee9dd54d280b1c543d10acd76] mm: move >>>>>>> common part of pagetable_*_ctor to helper >>>>>>> git bisect good fb73203263021f2ee9dd54d280b1c543d10acd76 >>>>>>> # bad: [8fd966c9310f14d5bbe653cf087853582170aad6] mm, swap: >>>>>>> remove old allocation path for HDD >>>>>>> git bisect bad 8fd966c9310f14d5bbe653cf087853582170aad6 >>>>>>> # bad: [8646971f02651146554233d63fdd721f5f060973] mm: shmem: skip >>>>>>> swapcache for swapin of synchronous swap device >>>>>>> git bisect bad 8646971f02651146554233d63fdd721f5f060973 >>>>>>> # good: [b8ba614eaa8dd31702c61e7df7231b1b18b99259] mm/damon/ >>>>>>> paddr: report filter-passed bytes back for DAMOS_STAT action >>>>>>> git bisect good b8ba614eaa8dd31702c61e7df7231b1b18b99259 >>>>>>> # good: [fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd] Docs/ABI/ >>>>>>> damon: document per-region DAMOS filter-passed bytes stat file >>>>>>> git bisect good fd0935b8e9e8c2edf05a3d0ffa09d0aa3e9cf2dd >>>>>>> # good: [3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599] selftests/ >>>>>>> damon: remove tests for DAMON debugfs interface >>>>>>> git bisect good 3ffd3cd7e2e8793d3b5fbb83c03668c47ab6d599 >>>>>>> # good: [bf9f93f0b7bff8af780330f5094775a39caf3612] mm/damon: >>>>>>> remove DAMON debugfs interface >>>>>>> git bisect good bf9f93f0b7bff8af780330f5094775a39caf3612 >>>>>>> # bad: [1746744be6ff271e29345a5be4cc144aa33b10ab] mm/memmap: >>>>>>> prevent double scanning of memmap by kmemleak >>>>>>> git bisect bad 1746744be6ff271e29345a5be4cc144aa33b10ab >>>>>>> # bad: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] mm/fake-numa: >>>>>>> allow later numa node hotplug >>>>>>> git bisect bad ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d >>>>>>> # first bad commit: [ca19a5ab8756ef78c34d02d2b8c266a9cc7bf57d] >>>>>>> mm/fake-numa: allow later numa node hotplug >>>>>>> >>>>>>>> --- >>>>>>>> drivers/acpi/numa/srat.c | 86 +++++++++++++++++++++++++ >>>>>>>> +++++++++++ >>>>>>>> include/acpi/acpi_numa.h | 5 +++ >>>>>>>> include/linux/numa_memblks.h | 3 ++ >>>>>>>> mm/numa_emulation.c | 45 ++++++++++++++++--- >>>>>>>> mm/numa_memblks.c | 2 +- >>>>>>>> 5 files changed, 133 insertions(+), 8 deletions(-) >>>>>>>> >>>>>>>> diff --git a/drivers/acpi/numa/srat.c b/drivers/acpi/numa/srat.c >>>>>>>> index bec0dcd1f9c3..59fffe34c9d0 100644 >>>>>>>> --- a/drivers/acpi/numa/srat.c >>>>>>>> +++ b/drivers/acpi/numa/srat.c >>>>>>>> @@ -81,6 +81,92 @@ int acpi_map_pxm_to_node(int pxm) >>>>>>>> } >>>>>>>> EXPORT_SYMBOL(acpi_map_pxm_to_node); >>>>>>>> +#ifdef CONFIG_NUMA_EMU >>>>>>>> +/* >>>>>>>> + * Take max_nid - 1 fake-numa nodes into account in both >>>>>>>> + * pxm_to_node_map()/node_to_pxm_map[] tables. >>>>>>>> + */ >>>>>>>> +int __init fix_pxm_node_maps(int max_nid) >>>>>>>> +{ >>>>>>>> + static int pxm_to_node_map_copy[MAX_PXM_DOMAINS] __initdata >>>>>>>> + = { [0 ... MAX_PXM_DOMAINS - 1] = NUMA_NO_NODE }; >>>>>>>> + static int node_to_pxm_map_copy[MAX_NUMNODES] __initdata >>>>>>>> + = { [0 ... MAX_NUMNODES - 1] = PXM_INVAL }; >>>>>>>> + int i, j, index = -1, count = 0; >>>>>>>> + nodemask_t nodes_to_enable; >>>>>>>> + >>>>>>>> + if (numa_off || srat_disabled()) >>>>>>>> + return -1; >>>>>>>> + >>>>>>>> + /* find fake nodes PXM mapping */ >>>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>>> + for (j = 0; j <= max_nid; j++) { >>>>>>>> + if ((emu_nid_to_phys[j] == i) && >>>>>>>> + WARN(node_to_pxm_map_copy[j] != PXM_INVAL, >>>>>>>> + "Node %d is already binded to PXM %d\n", >>>>>>>> + j, node_to_pxm_map_copy[j])) >>>>>>>> + return -1; >>>>>>>> + if (emu_nid_to_phys[j] == i) { >>>>>>>> + node_to_pxm_map_copy[j] = >>>>>>>> + node_to_pxm_map[i]; >>>>>>>> + if (j > index) >>>>>>>> + index = j; >>>>>>>> + count++; >>>>>>>> + } >>>>>>>> + } >>>>>>>> + } >>>>>>>> + } >>>>>>>> + if (WARN(index != max_nid, "%d max nid when expected %d\n", >>>>>>>> + index, max_nid)) >>>>>>>> + return -1; >>>>>>>> + >>>>>>>> + nodes_clear(nodes_to_enable); >>>>>>>> + >>>>>>>> + /* map phys nodes not used for fake nodes */ >>>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>>> + if (node_to_pxm_map[i] != PXM_INVAL) { >>>>>>>> + for (j = 0; j <= max_nid; j++) >>>>>>>> + if (emu_nid_to_phys[j] == i) >>>>>>>> + break; >>>>>>>> + /* fake nodes PXM mapping has been done */ >>>>>>>> + if (j <= max_nid) >>>>>>>> + continue; >>>>>>>> + /* find first hole */ >>>>>>>> + for (j = 0; >>>>>>>> + j < MAX_NUMNODES && >>>>>>>> + node_to_pxm_map_copy[j] != PXM_INVAL; >>>>>>>> + j++) >>>>>>>> + ; >>>>>>>> + if (WARN(j == MAX_NUMNODES, >>>>>>>> + "Number of nodes exceeds MAX_NUMNODES\n")) >>>>>>>> + return -1; >>>>>>>> + node_to_pxm_map_copy[j] = node_to_pxm_map[i]; >>>>>>>> + node_set(j, nodes_to_enable); >>>>>>>> + count++; >>>>>>>> + } >>>>>>>> + } >>>>>>>> + >>>>>>>> + /* creating reverse mapping in pxm_to_node_map[] */ >>>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) >>>>>>>> + if (node_to_pxm_map_copy[i] != PXM_INVAL && >>>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] == >>>>>>>> NUMA_NO_NODE) >>>>>>>> + pxm_to_node_map_copy[node_to_pxm_map_copy[i]] = i; >>>>>>>> + >>>>>>>> + /* overwrite with new mapping */ >>>>>>>> + for (i = 0; i < MAX_NUMNODES; i++) { >>>>>>>> + node_to_pxm_map[i] = node_to_pxm_map_copy[i]; >>>>>>>> + pxm_to_node_map[i] = pxm_to_node_map_copy[i]; >>>>>>>> + } >>>>>>>> + >>>>>>>> + /* enable other nodes found in PXM for hotplug */ >>>>>>>> + nodes_or(numa_nodes_parsed, nodes_to_enable, >>>>>>>> numa_nodes_parsed); >>>>>>>> + >>>>>>>> + pr_debug("found %d total number of nodes\n", count); >>>>>>>> + return 0; >>>>>>>> +} >>>>>>>> +#endif >>>>>>>> + >>>>>>>> static void __init >>>>>>>> acpi_table_print_srat_entry(struct acpi_subtable_header >>>>>>>> *header) >>>>>>>> { >>>>>>>> diff --git a/include/acpi/acpi_numa.h b/include/acpi/acpi_numa.h >>>>>>>> index b5f594754a9e..99b960bd473c 100644 >>>>>>>> --- a/include/acpi/acpi_numa.h >>>>>>>> +++ b/include/acpi/acpi_numa.h >>>>>>>> @@ -17,11 +17,16 @@ extern int node_to_pxm(int); >>>>>>>> extern int acpi_map_pxm_to_node(int); >>>>>>>> extern unsigned char acpi_srat_revision; >>>>>>>> extern void disable_srat(void); >>>>>>>> +extern int fix_pxm_node_maps(int max_nid); >>>>>>>> extern void bad_srat(void); >>>>>>>> extern int srat_disabled(void); >>>>>>>> #else /* CONFIG_ACPI_NUMA */ >>>>>>>> +static inline int fix_pxm_node_maps(int max_nid) >>>>>>>> +{ >>>>>>>> + return 0; >>>>>>>> +} >>>>>>>> static inline void disable_srat(void) >>>>>>>> { >>>>>>>> } >>>>>>>> diff --git a/include/linux/numa_memblks.h b/include/linux/ >>>>>>>> numa_memblks.h >>>>>>>> index cfad6ce7e1bd..dd85613cdd86 100644 >>>>>>>> --- a/include/linux/numa_memblks.h >>>>>>>> +++ b/include/linux/numa_memblks.h >>>>>>>> @@ -29,7 +29,10 @@ int __init numa_cleanup_meminfo(struct >>>>>>>> numa_meminfo *mi); >>>>>>>> int __init numa_memblks_init(int (*init_func)(void), >>>>>>>> bool memblock_force_top_down); >>>>>>>> +extern int numa_distance_cnt; >>>>>>>> + >>>>>>>> #ifdef CONFIG_NUMA_EMU >>>>>>>> +extern int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>>> int numa_emu_cmdline(char *str); >>>>>>>> void __init numa_emu_update_cpu_to_node(int *emu_nid_to_phys, >>>>>>>> unsigned int nr_emu_nids); >>>>>>>> diff --git a/mm/numa_emulation.c b/mm/numa_emulation.c >>>>>>>> index 031fb9961bf7..9d55679d99ce 100644 >>>>>>>> --- a/mm/numa_emulation.c >>>>>>>> +++ b/mm/numa_emulation.c >>>>>>>> @@ -8,11 +8,12 @@ >>>>>>>> #include <linux/memblock.h> >>>>>>>> #include <linux/numa_memblks.h> >>>>>>>> #include <asm/numa.h> >>>>>>>> +#include <acpi/acpi_numa.h> >>>>>>>> #define FAKE_NODE_MIN_SIZE ((u64)32 << 20) >>>>>>>> #define FAKE_NODE_MIN_HASH_MASK (~(FAKE_NODE_MIN_SIZE - >>>>>>>> 1UL)) >>>>>>>> -static int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>>> +int emu_nid_to_phys[MAX_NUMNODES]; >>>>>>>> static char *emu_cmdline __initdata; >>>>>>>> int __init numa_emu_cmdline(char *str) >>>>>>>> @@ -379,6 +380,7 @@ void __init numa_emulation(struct >>>>>>>> numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>>> size_t phys_size = numa_dist_cnt * numa_dist_cnt * >>>>>>>> sizeof(phys_dist[0]); >>>>>>>> int max_emu_nid, dfl_phys_nid; >>>>>>>> int i, j, ret; >>>>>>>> + nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>>> if (!emu_cmdline) >>>>>>>> goto no_emu; >>>>>>>> @@ -395,7 +397,6 @@ void __init numa_emulation(struct >>>>>>>> numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>>> * split the system RAM into N fake nodes. >>>>>>>> */ >>>>>>>> if (strchr(emu_cmdline, 'U')) { >>>>>>>> - nodemask_t physnode_mask = numa_nodes_parsed; >>>>>>>> unsigned long n; >>>>>>>> int nid = 0; >>>>>>>> @@ -465,9 +466,6 @@ void __init numa_emulation(struct >>>>>>>> numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>>> */ >>>>>>>> max_emu_nid = setup_emu2phys_nid(&dfl_phys_nid); >>>>>>>> - /* commit */ >>>>>>>> - *numa_meminfo = ei; >>>>>>>> - >>>>>>>> /* Make sure numa_nodes_parsed only contains emulated >>>>>>>> nodes */ >>>>>>>> nodes_clear(numa_nodes_parsed); >>>>>>>> for (i = 0; i < ARRAY_SIZE(ei.blk); i++) >>>>>>>> @@ -475,10 +473,21 @@ void __init numa_emulation(struct >>>>>>>> numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>>> ei.blk[i].nid != NUMA_NO_NODE) >>>>>>>> node_set(ei.blk[i].nid, numa_nodes_parsed); >>>>>>>> - numa_emu_update_cpu_to_node(emu_nid_to_phys, >>>>>>>> ARRAY_SIZE(emu_nid_to_phys)); >>>>>>>> + /* fix pxm_to_node_map[] and node_to_pxm_map[] to avoid >>>>>>>> collision >>>>>>>> + * with faked numa nodes, particularly during later memory >>>>>>>> hotplug >>>>>>>> + * handling, and also update numa_nodes_parsed accordingly. >>>>>>>> + */ >>>>>>>> + ret = fix_pxm_node_maps(max_emu_nid); >>>>>>>> + if (ret < 0) >>>>>>>> + goto no_emu; >>>>>>>> + >>>>>>>> + /* commit */ >>>>>>>> + *numa_meminfo = ei; >>>>>>>> + >>>>>>>> + numa_emu_update_cpu_to_node(emu_nid_to_phys, max_emu_nid + 1); >>>>>>>> /* make sure all emulated nodes are mapped to a >>>>>>>> physical node */ >>>>>>>> - for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>>> + for (i = 0; i < max_emu_nid + 1; i++) >>>>>>>> if (emu_nid_to_phys[i] == NUMA_NO_NODE) >>>>>>>> emu_nid_to_phys[i] = dfl_phys_nid; >>>>>>>> @@ -501,12 +510,34 @@ void __init numa_emulation(struct >>>>>>>> numa_meminfo *numa_meminfo, int numa_dist_cnt) >>>>>>>> numa_set_distance(i, j, dist); >>>>>>>> } >>>>>>>> } >>>>>>>> + for (i = 0; i < numa_distance_cnt; i++) { >>>>>>>> + for (j = 0; j < numa_distance_cnt; j++) { >>>>>>>> + int physi, physj; >>>>>>>> + u8 dist; >>>>>>>> + >>>>>>>> + /* distance between fake nodes is already ok */ >>>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE && >>>>>>>> + emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>>> + continue; >>>>>>>> + if (emu_nid_to_phys[i] != NUMA_NO_NODE) >>>>>>>> + physi = emu_nid_to_phys[i]; >>>>>>>> + else >>>>>>>> + physi = i - max_emu_nid; >>>>>>>> + if (emu_nid_to_phys[j] != NUMA_NO_NODE) >>>>>>>> + physj = emu_nid_to_phys[j]; >>>>>>>> + else >>>>>>>> + physj = j - max_emu_nid; >>>>>>>> + dist = phys_dist[physi * numa_dist_cnt + physj]; >>>>>>>> + numa_set_distance(i, j, dist); >>>>>>>> + } >>>>>>>> + } >>>>>>>> /* free the copied physical distance table */ >>>>>>>> memblock_free(phys_dist, phys_size); >>>>>>>> return; >>>>>>>> no_emu: >>>>>>>> + numa_nodes_parsed = physnode_mask; >>>>>>>> /* No emulation. Build identity emu_nid_to_phys[] for >>>>>>>> numa_add_cpu() */ >>>>>>>> for (i = 0; i < ARRAY_SIZE(emu_nid_to_phys); i++) >>>>>>>> emu_nid_to_phys[i] = i; >>>>>>>> diff --git a/mm/numa_memblks.c b/mm/numa_memblks.c >>>>>>>> index a3877e9bc878..ff4054f4334d 100644 >>>>>>>> --- a/mm/numa_memblks.c >>>>>>>> +++ b/mm/numa_memblks.c >>>>>>>> @@ -7,7 +7,7 @@ >>>>>>>> #include <linux/numa.h> >>>>>>>> #include <linux/numa_memblks.h> >>>>>>>> -static int numa_distance_cnt; >>>>>>>> +int numa_distance_cnt; >>>>>>>> static u8 *numa_distance; >>>>>>>> nodemask_t numa_nodes_parsed __initdata; >>>>>> >>>>>> >>>>>> Best Regards, >>>>>> Yan, Zi >>>>>> >>>> >>>> >>>> >>>> >> >> >> >> > ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 0/1] mm/fake-numa: allow later numa node hotplug 2025-01-06 12:06 [PATCH 0/1] mm/fake-numa: allow later numa node hotplug Bruno Faccini 2025-01-06 12:06 ` [PATCH 1/1] " Bruno Faccini @ 2025-01-07 10:08 ` David Hildenbrand 2025-01-10 14:59 ` Bruno Faccini 1 sibling, 1 reply; 15+ messages in thread From: David Hildenbrand @ 2025-01-07 10:08 UTC (permalink / raw) To: Bruno Faccini, linux-kernel Cc: linux-mm, akpm, rppt, ziy, jhubbard, mrusiniak Hi, > > With recent M.Rapoport set of fake-numa patches in mm-everything > and using numa=fake=4 boot parameter : > $ numactl --hardware > available: 4 nodes (0-3) > node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 0 size: 122518 MB > node 0 free: 117141 MB > node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 1 size: 219911 MB > node 1 free: 219751 MB > node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 2 size: 122599 MB > node 2 free: 122541 MB > node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 3 size: 122479 MB > node 3 free: 122408 MB Why are all CPUs indicated as belonging to all nodes? Is that expected or a BUG? I would have thought, just like memory, that one resource only belongs to one NUMA node. > > With recent M.Rapoport set of fake-numa patches in mm-everything, > this patch on top, using numa=fake=4 boot parameter : > # numactl —hardware > available: 12 nodes (0-11) > node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 0 size: 122518 MB > node 0 free: 116429 MB > node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 1 size: 122631 MB > node 1 free: 122576 MB > node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 2 size: 122599 MB > node 2 free: 122544 MB > node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 > 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 > 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 > 65 66 67 68 69 70 71 > node 3 size: 122479 MB > node 3 free: 122419 MB > node 4 cpus: > node 4 size: 97280 MB > node 4 free: 97279 MB ^ Is this where your driver hotplugged a single node and hotplugged memory? -- Cheers, David / dhildenb ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 0/1] mm/fake-numa: allow later numa node hotplug 2025-01-07 10:08 ` [PATCH 0/1] " David Hildenbrand @ 2025-01-10 14:59 ` Bruno Faccini 2025-01-14 14:15 ` David Hildenbrand 0 siblings, 1 reply; 15+ messages in thread From: Bruno Faccini @ 2025-01-10 14:59 UTC (permalink / raw) To: David Hildenbrand, linux-kernel Cc: linux-mm, akpm, rppt, ziy, jhubbard, mrusiniak Hello David, Le 07/01/2025 à 11:08, David Hildenbrand a écrit : > > Hi, > >> >> With recent M.Rapoport set of fake-numa patches in mm-everything >> and using numa=fake=4 boot parameter : >> $ numactl --hardware >> available: 4 nodes (0-3) >> node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 0 size: 122518 MB >> node 0 free: 117141 MB >> node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 1 size: 219911 MB >> node 1 free: 219751 MB >> node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 2 size: 122599 MB >> node 2 free: 122541 MB >> node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 3 size: 122479 MB >> node 3 free: 122408 MB > > Why are all CPUs indicated as belonging to all nodes? Is that expected > or a BUG? This behaviour comes from original fake-numa implementation, and has been left as is by M.Rapoport recent fake-numa changes. > > I would have thought, just like memory, that one resource only belongs > to one NUMA node. "All fake-NUMA nodes that belong to a physical NUMA node share the same CPU cores", this was already the case in original/x86-only implementation so that fake-NUMA does not affect application launch commands. > > >> >> With recent M.Rapoport set of fake-numa patches in mm-everything, >> this patch on top, using numa=fake=4 boot parameter : >> # numactl —hardware >> available: 12 nodes (0-11) >> node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 0 size: 122518 MB >> node 0 free: 116429 MB >> node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 1 size: 122631 MB >> node 1 free: 122576 MB >> node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 2 size: 122599 MB >> node 2 free: 122544 MB >> node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >> 65 66 67 68 69 70 71 >> node 3 size: 122479 MB >> node 3 free: 122419 MB >> node 4 cpus: >> node 4 size: 97280 MB >> node 4 free: 97279 MB > > > ^ Is this where your driver hotplugged a single node and hotplugged memory? Yes, Node 4 is a GPU node and its memory has been hotplugged by the driver. > > > -- > Cheers, > > David / dhildenb > Thanks for your review and comments/questions, bye, Bruno ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 0/1] mm/fake-numa: allow later numa node hotplug 2025-01-10 14:59 ` Bruno Faccini @ 2025-01-14 14:15 ` David Hildenbrand 0 siblings, 0 replies; 15+ messages in thread From: David Hildenbrand @ 2025-01-14 14:15 UTC (permalink / raw) To: Bruno Faccini, linux-kernel Cc: linux-mm, akpm, rppt, ziy, jhubbard, mrusiniak >> >> I would have thought, just like memory, that one resource only belongs >> to one NUMA node. > "All fake-NUMA nodes that belong to a physical NUMA node share the same > CPU cores", this was already the case in original/x86-only > implementation so that fake-NUMA does not affect application launch > commands. Thanks! Interesting; a bit unexpected :) > >> >> >>> >>> With recent M.Rapoport set of fake-numa patches in mm-everything, >>> this patch on top, using numa=fake=4 boot parameter : >>> # numactl —hardware >>> available: 12 nodes (0-11) >>> node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >>> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >>> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >>> 65 66 67 68 69 70 71 >>> node 0 size: 122518 MB >>> node 0 free: 116429 MB >>> node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >>> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >>> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >>> 65 66 67 68 69 70 71 >>> node 1 size: 122631 MB >>> node 1 free: 122576 MB >>> node 2 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >>> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >>> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >>> 65 66 67 68 69 70 71 >>> node 2 size: 122599 MB >>> node 2 free: 122544 MB >>> node 3 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >>> 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 >>> 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 >>> 65 66 67 68 69 70 71 >>> node 3 size: 122479 MB >>> node 3 free: 122419 MB >>> node 4 cpus: >>> node 4 size: 97280 MB >>> node 4 free: 97279 MB >> >> >> ^ Is this where your driver hotplugged a single node and hotplugged memory? > Yes, Node 4 is a GPU node and its memory has been hotplugged by the driver. Thanks! -- Cheers, David / dhildenb ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2025-01-27 17:39 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2025-01-06 12:06 [PATCH 0/1] mm/fake-numa: allow later numa node hotplug Bruno Faccini 2025-01-06 12:06 ` [PATCH 1/1] " Bruno Faccini 2025-01-14 16:05 ` David Hildenbrand 2025-01-17 5:00 ` [fake numa not working][PATCH " Hyeonggon Yoo 2025-01-17 19:09 ` [fake numa not working] [PATCH " Zi Yan 2025-01-20 0:37 ` Hyeonggon Yoo 2025-01-20 2:16 ` Zi Yan 2025-01-20 2:37 ` Hyeonggon Yoo 2025-01-20 3:27 ` Zi Yan 2025-01-20 4:35 ` Hyeonggon Yoo 2025-01-20 8:11 ` Bruno Faccini 2025-01-27 17:38 ` Bruno Faccini 2025-01-07 10:08 ` [PATCH 0/1] " David Hildenbrand 2025-01-10 14:59 ` Bruno Faccini 2025-01-14 14:15 ` David Hildenbrand
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox