From: Eric Munson <ebmunson@us.ibm.com>
To: linux-mm@kvack.org
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@ozlabs.org,
libhugetlbfs-devel@lists.sourceforge.net,
Eric Munson <ebmunson@us.ibm.com>
Subject: [PATCH 5/5 V2] [PPC] Setup stack memory segment for hugetlb pages
Date: Mon, 28 Jul 2008 12:17:15 -0700 [thread overview]
Message-ID: <d73cf131d1a8db8fcce1200634d2975fb552b575.1216928613.git.ebmunson@us.ibm.com> (raw)
In-Reply-To: <cover.1216928613.git.ebmunson@us.ibm.com>
In-Reply-To: <cover.1216928613.git.ebmunson@us.ibm.com>
Currently the memory slice that holds the process stack is always initialized
to hold small pages. This patch defines the weak function that is declared
in the previos patch to convert the stack slice to hugetlb pages.
Signed-off-by: Eric Munson <ebmunson@us.ibm.com>
---
Based on 2.6.26-rc8-mm1
Changes from V1:
Instead of setting the mm-wide page size to huge pages, set only the relavent
slice psize using an arch defined weak function.
arch/powerpc/mm/hugetlbpage.c | 6 ++++++
arch/powerpc/mm/slice.c | 11 +++++++++++
include/asm-powerpc/hugetlb.h | 3 +++
3 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index fb42c4d..bd7f777 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -152,6 +152,12 @@ pmd_t *hpmd_alloc(struct mm_struct *mm, pud_t *pud, unsigned long addr,
}
#endif
+void hugetlb_mm_setup(struct mm_struct *mm, unsigned long addr,
+ unsigned long len)
+{
+ slice_convert_address(mm, addr, len, shift_to_mmu_psize(HPAGE_SHIFT));
+}
+
/* Build list of addresses of gigantic pages. This function is used in early
* boot before the buddy or bootmem allocator is setup.
*/
diff --git a/arch/powerpc/mm/slice.c b/arch/powerpc/mm/slice.c
index 583be67..d984733 100644
--- a/arch/powerpc/mm/slice.c
+++ b/arch/powerpc/mm/slice.c
@@ -30,6 +30,7 @@
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/module.h>
+#include <linux/hugetlb.h>
#include <asm/mman.h>
#include <asm/mmu.h>
#include <asm/spu.h>
@@ -397,6 +398,16 @@ static unsigned long slice_find_area(struct mm_struct *mm, unsigned long len,
#define MMU_PAGE_BASE MMU_PAGE_4K
#endif
+void slice_convert_address(struct mm_struct *mm, unsigned long addr,
+ unsigned long len, unsigned int psize)
+{
+ struct slice_mask mask;
+
+ mask = slice_range_to_mask(addr, len);
+ slice_convert(mm, mask, psize);
+ slice_flush_segments(mm);
+}
+
unsigned long slice_get_unmapped_area(unsigned long addr, unsigned long len,
unsigned long flags, unsigned int psize,
int topdown, int use_cache)
diff --git a/include/asm-powerpc/hugetlb.h b/include/asm-powerpc/hugetlb.h
index 26f0d0a..10ef089 100644
--- a/include/asm-powerpc/hugetlb.h
+++ b/include/asm-powerpc/hugetlb.h
@@ -17,6 +17,9 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr,
pte_t *ptep);
+void slice_convert_address(struct mm_struct *mm, unsigned long addr,
+ unsigned long len, unsigned int psize);
+
/*
* If the arch doesn't supply something else, assume that hugepage
* size aligned regions are ok without further preparation.
--
1.5.6.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2008-07-28 19:17 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-28 19:17 [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks Eric Munson
2008-07-28 19:17 ` [PATCH 1/5 V2] Align stack boundaries based on personality Eric Munson
2008-07-28 20:09 ` Dave Hansen
2008-07-28 19:17 ` [PATCH 2/5 V2] Add shared and reservation control to hugetlb_file_setup Eric Munson
2008-07-28 19:17 ` [PATCH 3/5] Split boundary checking from body of do_munmap Eric Munson
2008-07-28 19:17 ` [PATCH 4/5 V2] Build hugetlb backed process stacks Eric Munson
2008-07-28 20:37 ` Dave Hansen
2008-07-28 19:17 ` Eric Munson [this message]
2008-07-28 20:33 ` [RFC] [PATCH 0/5 V2] Huge page backed user-space stacks Dave Hansen
2008-07-28 21:23 ` Eric B Munson
2008-07-30 8:41 ` Andrew Morton
2008-07-30 15:04 ` Eric B Munson
2008-07-30 15:08 ` Eric B Munson
2008-07-30 8:43 ` Andrew Morton
2008-07-30 17:23 ` Mel Gorman
2008-07-30 17:34 ` Andrew Morton
2008-07-30 19:30 ` Mel Gorman
2008-07-30 19:40 ` Christoph Lameter
2008-07-30 20:07 ` Andrew Morton
2008-07-31 10:31 ` Mel Gorman
2008-08-04 21:10 ` Dave Hansen
2008-08-05 11:11 ` Mel Gorman
2008-08-05 16:12 ` Dave Hansen
2008-08-05 16:28 ` Mel Gorman
2008-08-05 17:53 ` Dave Hansen
2008-08-06 9:02 ` Mel Gorman
2008-08-06 19:50 ` Dave Hansen
2008-08-07 16:06 ` Mel Gorman
2008-08-07 17:29 ` Dave Hansen
2008-08-11 8:04 ` Mel Gorman
2008-07-31 6:04 ` Nick Piggin
2008-07-31 6:14 ` Andrew Morton
2008-07-31 6:26 ` Nick Piggin
2008-07-31 11:27 ` Mel Gorman
2008-07-31 11:51 ` Nick Piggin
2008-07-31 13:50 ` Mel Gorman
2008-07-31 14:32 ` Michael Ellerman
2008-08-06 18:49 ` Andi Kleen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d73cf131d1a8db8fcce1200634d2975fb552b575.1216928613.git.ebmunson@us.ibm.com \
--to=ebmunson@us.ibm.com \
--cc=libhugetlbfs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox