From: Qi Zheng <zhengqi.arch@bytedance.com>
To: Anshuman Khandual <anshuman.khandual@arm.com>,
mike.kravetz@oracle.com, songmuchun@bytedance.com,
akpm@linux-foundation.org, catalin.marinas@arm.com,
will@kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH] mm: hugetlb: kill set_huge_swap_pte_at()
Date: Mon, 27 Jun 2022 15:29:52 +0800 [thread overview]
Message-ID: <d68572c8-a12b-1e3a-09d4-7a971ff305d6@bytedance.com> (raw)
In-Reply-To: <b46f5390-830d-08fd-0d6d-3fda7d31c36a@arm.com>
On 2022/6/27 15:14, Anshuman Khandual wrote:
>
>
> On 6/27/22 12:25, Qi Zheng wrote:
>>
>>
>> On 2022/6/27 14:18, Anshuman Khandual wrote:
>>>
>>>
>>> On 6/26/22 20:27, Qi Zheng wrote:
>>>> The commit e5251fd43007 ("mm/hugetlb: introduce set_huge_swap_pte_at()
>>>> helper") add set_huge_swap_pte_at() to handle swap entries on
>>>> architectures that support hugepages consisting of contiguous ptes.
>>>> And currently the set_huge_swap_pte_at() is only overridden by arm64.
>>>>
>>>> The set_huge_swap_pte_at() provide a sz parameter to help determine
>>>> the number of entries to be updated. But in fact, all hugetlb swap
>>>> entries contain pfn information, so we can find the corresponding
>>>> folio through the pfn recorded in the swap entry, then the folio_size()
>>>> is the number of entries that need to be updated.
>>>>
>>>> And considering that users will easily cause bugs by ignoring the
>>>> difference between set_huge_swap_pte_at() and set_huge_pte_at().
>>>> Let's handle swap entries in set_huge_pte_at() and remove the
>>>> set_huge_swap_pte_at(), then we can call set_huge_pte_at()
>>>> anywhere, which simplifies our coding.
>>>>
>>>> Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
>>>> ---
>>>> arch/arm64/include/asm/hugetlb.h | 3 ---
>>>> arch/arm64/mm/hugetlbpage.c | 34 ++++++++++++++++----------------
>>>> include/linux/hugetlb.h | 13 ------------
>>>> mm/hugetlb.c | 8 +++-----
>>>> mm/rmap.c | 11 +++--------
>>>> 5 files changed, 23 insertions(+), 46 deletions(-)
>>>>
>>>> diff --git a/arch/arm64/include/asm/hugetlb.h b/arch/arm64/include/asm/hugetlb.h
>>>> index 1fd2846dbefe..d20f5da2d76f 100644
>>>> --- a/arch/arm64/include/asm/hugetlb.h
>>>> +++ b/arch/arm64/include/asm/hugetlb.h
>>>> @@ -46,9 +46,6 @@ extern void huge_pte_clear(struct mm_struct *mm, unsigned long addr,
>>>> pte_t *ptep, unsigned long sz);
>>>> #define __HAVE_ARCH_HUGE_PTEP_GET
>>>> extern pte_t huge_ptep_get(pte_t *ptep);
>>>> -extern void set_huge_swap_pte_at(struct mm_struct *mm, unsigned long addr,
>>>> - pte_t *ptep, pte_t pte, unsigned long sz);
>>>> -#define set_huge_swap_pte_at set_huge_swap_pte_at
>>>> void __init arm64_hugetlb_cma_reserve(void);
>>>> diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
>>>> index c9e076683e5d..58b89b9d13e0 100644
>>>> --- a/arch/arm64/mm/hugetlbpage.c
>>>> +++ b/arch/arm64/mm/hugetlbpage.c
>>>> @@ -238,6 +238,13 @@ static void clear_flush(struct mm_struct *mm,
>>>> flush_tlb_range(&vma, saddr, addr);
>>>> }
>>>> +static inline struct folio *hugetlb_swap_entry_to_folio(swp_entry_t entry)
>>>> +{
>>>> + VM_BUG_ON(!is_migration_entry(entry) && !is_hwpoison_entry(entry));
>>>> +
>>>> + return page_folio(pfn_to_page(swp_offset(entry)));
>>>> +}
>>>
>>> Extracting this huge page size from swap entry is an additional operation which
>>> will increase the over all cost for set_huge_swap_pte_at(). At present the size
>>
>> Hmm, I think this cost is very small. And replacing
>> set_huge_swap_pte_at() by transparently handling swap entries helps
>> reduce possible bugs, which is worthwhile.
>
> Possible bugs ? There are just six call sites for this function.
For the swap entry of hugetlb, we need to remember that we should
call set_huge_swap_pte_at() instead of set_huge_pte_at() every
time. And the difference between the two is only on arm64, other
architectures should not need to pay attention to this.
> Although this proposed patch is functionally correct, I dont see
> a valid enough reason to increase the overall cost in the path.
--
Thanks,
Qi
next prev parent reply other threads:[~2022-06-27 7:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-26 14:57 Qi Zheng
2022-06-27 3:32 ` Muchun Song
2022-06-27 6:18 ` Anshuman Khandual
2022-06-27 6:55 ` Qi Zheng
2022-06-27 7:14 ` Anshuman Khandual
2022-06-27 7:29 ` Qi Zheng [this message]
2022-06-27 7:35 ` Anshuman Khandual
2022-06-27 14:34 ` Matthew Wilcox
2022-06-28 5:47 ` Anshuman Khandual
2022-06-27 7:44 ` Muchun Song
2022-06-27 14:41 ` Matthew Wilcox
2022-06-28 3:34 ` Qi Zheng
2023-09-21 16:25 ` Ryan Roberts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d68572c8-a12b-1e3a-09d4-7a971ff305d6@bytedance.com \
--to=zhengqi.arch@bytedance.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mike.kravetz@oracle.com \
--cc=songmuchun@bytedance.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox