linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Tim Chen <tim.c.chen@linux.intel.com>
To: Kemeng Shi <shikemeng@huaweicloud.com>, akpm@linux-foundation.org
Cc: kasong@tencent.com, linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/9] mm: swap: rename __swap_[entry/entries]_free[_locked] to swap_[entry/entries]_put[_locked]
Date: Fri, 14 Mar 2025 13:37:11 -0700	[thread overview]
Message-ID: <c7f9151ecdd54340f5f059f0a791cc68b5048fc4.camel@linux.intel.com> (raw)
In-Reply-To: <20250313210515.9920-2-shikemeng@huaweicloud.com>

On Fri, 2025-03-14 at 05:05 +0800, Kemeng Shi wrote:
> In __swap_entry_free[_locked] and __swap_entries_free, we decrease count
> first and only free swap entry if count drops to zero. This behavior is
> more akin to a put() operation rather than a free() operation. Therefore,
> rename these functions with "put" instead of "free".
> Additionally, add "_nr" suffix to swap_entries_put to indicate the input
> range may span swap clusters.
> 

Reviewed-by: Tim Chen <tim.c.chen@linux.intel.com>

> Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
> ---
>  mm/swapfile.c | 28 ++++++++++++++--------------
>  1 file changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/mm/swapfile.c b/mm/swapfile.c
> index 628f67974a7c..5a775456e26c 100644
> --- a/mm/swapfile.c
> +++ b/mm/swapfile.c
> @@ -1347,9 +1347,9 @@ static struct swap_info_struct *_swap_info_get(swp_entry_t entry)
>  	return NULL;
>  }
>  
> -static unsigned char __swap_entry_free_locked(struct swap_info_struct *si,
> -					      unsigned long offset,
> -					      unsigned char usage)
> +static unsigned char swap_entry_put_locked(struct swap_info_struct *si,
> +					   unsigned long offset,
> +					   unsigned char usage)
>  {
>  	unsigned char count;
>  	unsigned char has_cache;
> @@ -1453,15 +1453,15 @@ struct swap_info_struct *get_swap_device(swp_entry_t entry)
>  	return NULL;
>  }
>  
> -static unsigned char __swap_entry_free(struct swap_info_struct *si,
> -				       swp_entry_t entry)
> +static unsigned char swap_entry_put(struct swap_info_struct *si,
> +				    swp_entry_t entry)
>  {
>  	struct swap_cluster_info *ci;
>  	unsigned long offset = swp_offset(entry);
>  	unsigned char usage;
>  
>  	ci = lock_cluster(si, offset);
> -	usage = __swap_entry_free_locked(si, offset, 1);
> +	usage = swap_entry_put_locked(si, offset, 1);
>  	if (!usage)
>  		swap_entry_range_free(si, ci, swp_entry(si->type, offset), 1);
>  	unlock_cluster(ci);
> @@ -1469,8 +1469,8 @@ static unsigned char __swap_entry_free(struct swap_info_struct *si,
>  	return usage;
>  }
>  
> -static bool __swap_entries_free(struct swap_info_struct *si,
> -		swp_entry_t entry, int nr)
> +static bool swap_entries_put_nr(struct swap_info_struct *si,
> +				swp_entry_t entry, int nr)
>  {
>  	unsigned long offset = swp_offset(entry);
>  	unsigned int type = swp_type(entry);
> @@ -1501,7 +1501,7 @@ static bool __swap_entries_free(struct swap_info_struct *si,
>  fallback:
>  	for (i = 0; i < nr; i++) {
>  		if (data_race(si->swap_map[offset + i])) {
> -			count = __swap_entry_free(si, swp_entry(type, offset + i));
> +			count = swap_entry_put(si, swp_entry(type, offset + i));
>  			if (count == SWAP_HAS_CACHE)
>  				has_cache = true;
>  		} else {
> @@ -1552,7 +1552,7 @@ static void cluster_swap_free_nr(struct swap_info_struct *si,
>  
>  	ci = lock_cluster(si, offset);
>  	do {
> -		if (!__swap_entry_free_locked(si, offset, usage))
> +		if (!swap_entry_put_locked(si, offset, usage))
>  			swap_entry_range_free(si, ci, swp_entry(si->type, offset), 1);
>  	} while (++offset < end);
>  	unlock_cluster(ci);
> @@ -1599,7 +1599,7 @@ void put_swap_folio(struct folio *folio, swp_entry_t entry)
>  		swap_entry_range_free(si, ci, entry, size);
>  	else {
>  		for (int i = 0; i < size; i++, entry.val++) {
> -			if (!__swap_entry_free_locked(si, offset + i, SWAP_HAS_CACHE))
> +			if (!swap_entry_put_locked(si, offset + i, SWAP_HAS_CACHE))
>  				swap_entry_range_free(si, ci, entry, 1);
>  		}
>  	}
> @@ -1798,7 +1798,7 @@ void free_swap_and_cache_nr(swp_entry_t entry, int nr)
>  	/*
>  	 * First free all entries in the range.
>  	 */
> -	any_only_cache = __swap_entries_free(si, entry, nr);
> +	any_only_cache = swap_entries_put_nr(si, entry, nr);
>  
>  	/*
>  	 * Short-circuit the below loop if none of the entries had their
> @@ -1811,7 +1811,7 @@ void free_swap_and_cache_nr(swp_entry_t entry, int nr)
>  	 * Now go back over the range trying to reclaim the swap cache. This is
>  	 * more efficient for large folios because we will only try to reclaim
>  	 * the swap once per folio in the common case. If we do
> -	 * __swap_entry_free() and __try_to_reclaim_swap() in the same loop, the
> +	 * swap_entry_put() and __try_to_reclaim_swap() in the same loop, the
>  	 * latter will get a reference and lock the folio for every individual
>  	 * page but will only succeed once the swap slot for every subpage is
>  	 * zero.
> @@ -3758,7 +3758,7 @@ int add_swap_count_continuation(swp_entry_t entry, gfp_t gfp_mask)
>   * into, carry if so, or else fail until a new continuation page is allocated;
>   * when the original swap_map count is decremented from 0 with continuation,
>   * borrow from the continuation and report whether it still holds more.
> - * Called while __swap_duplicate() or caller of __swap_entry_free_locked()
> + * Called while __swap_duplicate() or caller of swap_entry_put_locked()
>   * holds cluster lock.
>   */
>  static bool swap_count_continued(struct swap_info_struct *si,



  reply	other threads:[~2025-03-14 20:37 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-03-13 21:05 [PATCH 0/9] Minor cleanups and improvements to swap freeing code Kemeng Shi
2025-03-13 21:05 ` [PATCH 1/9] mm: swap: rename __swap_[entry/entries]_free[_locked] to swap_[entry/entries]_put[_locked] Kemeng Shi
2025-03-14 20:37   ` Tim Chen [this message]
2025-03-13 21:05 ` [PATCH 2/9] mm: swap: factor out the actual swap entry freeing logic to new helper Kemeng Shi
2025-03-13 17:42   ` Kairui Song
2025-03-14  7:32     ` Kemeng Shi
2025-03-14  7:47       ` Kairui Song
2025-03-14  8:39         ` Kemeng Shi
2025-03-13 21:05 ` [PATCH 3/9] mm: swap: use __swap_entry_free() to free swap entry in swap_entry_put_locked() Kemeng Shi
2025-03-14 20:59   ` Tim Chen
2025-03-13 21:05 ` [PATCH 4/9] mm: swap: remove unneeded VM_BUG_ON(*map != SWAP_HAS_CACHE) in swap_entry_range_free() Kemeng Shi
2025-03-14 21:09   ` Tim Chen
2025-03-13 21:05 ` [PATCH 5/9] mm: swap: use swap_entries_free() drop last 1 flag in swap_entries_put_nr() Kemeng Shi
2025-03-14 21:21   ` Tim Chen
2025-03-13 21:05 ` [PATCH 6/9] mm: swap: drop last SWAP_MAP_SHMEM flag in batch " Kemeng Shi
2025-03-14 21:34   ` Tim Chen
2025-03-13 21:05 ` [PATCH 7/9] mm: swap: free each cluster individually in swap_entries_put_map_nr() Kemeng Shi
2025-03-14 20:53   ` Tim Chen
2025-03-17 17:30   ` Tim Chen
2025-03-13 21:05 ` [PATCH 8/9] mm: swap: factor out helper to drop cache of entries within a single cluster Kemeng Shi
2025-03-15  0:24   ` Tim Chen
2025-03-13 21:05 ` [PATCH 9/9] mm: swap: replace cluster_swap_free_nr() with swap_entries_put_[map/cache]() Kemeng Shi
2025-03-17 18:23   ` Tim Chen
2025-03-14 20:27 ` [PATCH 0/9] Minor cleanups and improvements to swap freeing code Tim Chen
2025-03-18  1:29   ` Kemeng Shi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c7f9151ecdd54340f5f059f0a791cc68b5048fc4.camel@linux.intel.com \
    --to=tim.c.chen@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=kasong@tencent.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=shikemeng@huaweicloud.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox