linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Vlastimil Babka <vbabka@suse.cz>,
	Andrew Morton <akpm@linux-foundation.org>,
	"Liam R. Howlett" <Liam.Howlett@oracle.com>,
	Lorenzo Stoakes <lorenzo.stoakes@oracle.com>,
	Jann Horn <jannh@google.com>, Mike Rapoport <rppt@kernel.org>,
	Suren Baghdasaryan <surenb@google.com>,
	Michal Hocko <mhocko@suse.com>, Colin Cross <ccross@google.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/4] mm, madvise: move madvise_set_anon_name() down the file
Date: Tue, 24 Jun 2025 16:05:26 +0200	[thread overview]
Message-ID: <c6240a90-e02a-4ae2-b144-4fbf82aca6ce@redhat.com> (raw)
In-Reply-To: <20250624-anon_name_cleanup-v2-3-600075462a11@suse.cz>

On 24.06.25 15:03, Vlastimil Babka wrote:
> Preparatory change so that we can use madvise_lock()/unlock() in the
> function without forward declarations or more thorough shuffling.
> 
> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
> ---
>   mm/madvise.c | 64 ++++++++++++++++++++++++++++++------------------------------
>   1 file changed, 32 insertions(+), 32 deletions(-)
> 
> diff --git a/mm/madvise.c b/mm/madvise.c
> index 7e8819b5e9a0f183213ffe19d7e52bd5fda5f49d..cae064479cdf908707c45b941bd03d43d095eab6 100644
> --- a/mm/madvise.c
> +++ b/mm/madvise.c
> @@ -133,38 +133,6 @@ static int replace_anon_vma_name(struct vm_area_struct *vma,
>   
>   	return 0;
>   }
> -
> -static int madvise_set_anon_name(struct mm_struct *mm, unsigned long start,
> -		unsigned long len_in, struct anon_vma_name *anon_name)
> -{
> -	unsigned long end;
> -	unsigned long len;
> -	struct madvise_behavior madv_behavior = {
> -		.mm = mm,
> -		.behavior = __MADV_SET_ANON_VMA_NAME,
> -		.lock_mode = MADVISE_MMAP_WRITE_LOCK,
> -		.anon_name = anon_name,
> -	};
> -
> -	if (start & ~PAGE_MASK)
> -		return -EINVAL;
> -	len = (len_in + ~PAGE_MASK) & PAGE_MASK;
> -
> -	/* Check to see whether len was rounded up from small -ve to zero */
> -	if (len_in && !len)
> -		return -EINVAL;
> -
> -	end = start + len;
> -	if (end < start)
> -		return -EINVAL;
> -
> -	if (end == start)
> -		return 0;
> -
> -	madv_behavior.range.start = start;
> -	madv_behavior.range.end = end;
> -	return madvise_walk_vmas(&madv_behavior);
> -}
>   #else /* CONFIG_ANON_VMA_NAME */
>   static int replace_anon_vma_name(struct vm_area_struct *vma,
>   				 struct anon_vma_name *anon_name)
> @@ -2109,6 +2077,38 @@ static inline bool is_valid_name_char(char ch)
>   		!strchr(ANON_VMA_NAME_INVALID_CHARS, ch);
>   }
>   
> +static int madvise_set_anon_name(struct mm_struct *mm, unsigned long start,
> +		unsigned long len_in, struct anon_vma_name *anon_name)
> +{
> +	unsigned long end;
> +	unsigned long len;
> +	struct madvise_behavior madv_behavior = {
> +		.mm = mm,
> +		.behavior = __MADV_SET_ANON_VMA_NAME,
> +		.lock_mode = MADVISE_MMAP_WRITE_LOCK,
> +		.anon_name = anon_name,
> +	};
> +
> +	if (start & ~PAGE_MASK)
> +		return -EINVAL;
> +	len = (len_in + ~PAGE_MASK) & PAGE_MASK;
> +
> +	/* Check to see whether len was rounded up from small -ve to zero */
> +	if (len_in && !len)
> +		return -EINVAL;
> +
> +	end = start + len;
> +	if (end < start)
> +		return -EINVAL;
> +
> +	if (end == start)
> +		return 0;
> +
> +	madv_behavior.range.start = start;
> +	madv_behavior.range.end = end;
> +	return madvise_walk_vmas(&madv_behavior);
> +}
> +
>   int set_anon_vma_name(unsigned long addr, unsigned long size,
>   		      const char __user *uname)
>   {
> 

Personally, I would squash that into #4, given that #4 is pretty small ;)

Acked-by: David Hildenbrand <david@redhat.com>

-- 
Cheers,

David / dhildenb



  reply	other threads:[~2025-06-24 14:05 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-06-24 13:03 [PATCH v2 0/4] madvise anon_name cleanups Vlastimil Babka
2025-06-24 13:03 ` [PATCH v2 1/4] mm, madvise: simplify anon_name handling Vlastimil Babka
2025-06-24 13:58   ` David Hildenbrand
2025-06-24 14:28     ` Suren Baghdasaryan
2025-06-24 16:41       ` Vlastimil Babka
2025-06-24 16:38     ` Vlastimil Babka
2025-06-24 15:26   ` Lorenzo Stoakes
2025-06-24 16:42     ` Vlastimil Babka
2025-06-24 17:01   ` Vlastimil Babka
2025-06-24 13:03 ` [PATCH v2 2/4] mm, madvise: extract mm code from prctl_set_vma() to mm/madvise.c Vlastimil Babka
2025-06-24 14:04   ` David Hildenbrand
2025-06-24 14:31     ` Suren Baghdasaryan
2025-06-24 15:28   ` Lorenzo Stoakes
2025-06-24 13:03 ` [PATCH v2 3/4] mm, madvise: move madvise_set_anon_name() down the file Vlastimil Babka
2025-06-24 14:05   ` David Hildenbrand [this message]
2025-06-24 14:33     ` Suren Baghdasaryan
2025-06-24 16:46     ` Vlastimil Babka
2025-06-24 15:36   ` Lorenzo Stoakes
2025-06-24 17:02   ` Vlastimil Babka
2025-06-24 13:03 ` [PATCH v2 4/4] mm, madvise: use standard madvise locking in madvise_set_anon_name() Vlastimil Babka
2025-06-24 14:06   ` David Hildenbrand
2025-06-24 14:35     ` Suren Baghdasaryan
2025-06-24 15:45   ` Lorenzo Stoakes
2025-06-24 16:48     ` Vlastimil Babka
2025-06-24 17:03   ` Vlastimil Babka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c6240a90-e02a-4ae2-b144-4fbf82aca6ce@redhat.com \
    --to=david@redhat.com \
    --cc=Liam.Howlett@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=ccross@google.com \
    --cc=jannh@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lorenzo.stoakes@oracle.com \
    --cc=mhocko@suse.com \
    --cc=rppt@kernel.org \
    --cc=surenb@google.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox