linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Ryan Roberts <ryan.roberts@arm.com>
To: Yu Zhao <yuzhao@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Matthew Wilcox <willy@infradead.org>,
	Yin Fengwei <fengwei.yin@intel.com>,
	David Hildenbrand <david@redhat.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Anshuman Khandual <anshuman.khandual@arm.com>,
	Yang Shi <shy828301@gmail.com>,
	"Huang, Ying" <ying.huang@intel.com>, Zi Yan <ziy@nvidia.com>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Itaru Kitayama <itaru.kitayama@gmail.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v4 2/5] mm: LARGE_ANON_FOLIO for improved performance
Date: Wed, 2 Aug 2023 10:33:12 +0100	[thread overview]
Message-ID: <c34282b6-fea4-248f-79a2-4a88006dd3b3@arm.com> (raw)
In-Reply-To: <CAOUHufZDt4i=YLpQCGTgsya+kfzDCJvYCE+-cXf0PUmFVpL9zg@mail.gmail.com>

On 01/08/2023 07:18, Yu Zhao wrote:
> On Wed, Jul 26, 2023 at 3:52 AM Ryan Roberts <ryan.roberts@arm.com> wrote:
>>
>> Introduce LARGE_ANON_FOLIO feature, which allows anonymous memory to be
>> allocated in large folios of a determined order. All pages of the large
>> folio are pte-mapped during the same page fault, significantly reducing
>> the number of page faults. The number of per-page operations (e.g. ref
>> counting, rmap management lru list management) are also significantly
>> reduced since those ops now become per-folio.
>>
>> The new behaviour is hidden behind the new LARGE_ANON_FOLIO Kconfig,
>> which defaults to disabled for now; The long term aim is for this to
>> defaut to enabled, but there are some risks around internal
>> fragmentation that need to be better understood first.
>>
>> When enabled, the folio order is determined as such: For a vma, process
>> or system that has explicitly disabled THP, we continue to allocate
>> order-0. THP is most likely disabled to avoid any possible internal
>> fragmentation so we honour that request.
>>
>> Otherwise, the return value of arch_wants_pte_order() is used. For vmas
>> that have not explicitly opted-in to use transparent hugepages (e.g.
>> where thp=madvise and the vma does not have MADV_HUGEPAGE), then
>> arch_wants_pte_order() is limited to 64K (or PAGE_SIZE, whichever is
>> bigger). This allows for a performance boost without requiring any
>> explicit opt-in from the workload while limitting internal
>> fragmentation.
>>
>> If the preferred order can't be used (e.g. because the folio would
>> breach the bounds of the vma, or because ptes in the region are already
>> mapped) then we fall back to a suitable lower order; first
>> PAGE_ALLOC_COSTLY_ORDER, then order-0.
>>
>> arch_wants_pte_order() can be overridden by the architecture if desired.
>> Some architectures (e.g. arm64) can coalsece TLB entries if a contiguous
>> set of ptes map physically contigious, naturally aligned memory, so this
>> mechanism allows the architecture to optimize as required.
>>
>> Here we add the default implementation of arch_wants_pte_order(), used
>> when the architecture does not define it, which returns -1, implying
>> that the HW has no preference. In this case, mm will choose it's own
>> default order.
>>
>> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
>> ---
>>  include/linux/pgtable.h |  13 ++++
>>  mm/Kconfig              |  10 +++
>>  mm/memory.c             | 166 ++++++++++++++++++++++++++++++++++++----
>>  3 files changed, 172 insertions(+), 17 deletions(-)
>>
>> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
>> index 5063b482e34f..2a1d83775837 100644
>> --- a/include/linux/pgtable.h
>> +++ b/include/linux/pgtable.h
>> @@ -313,6 +313,19 @@ static inline bool arch_has_hw_pte_young(void)
>>  }
>>  #endif
>>
>> +#ifndef arch_wants_pte_order
>> +/*
>> + * Returns preferred folio order for pte-mapped memory. Must be in range [0,
>> + * PMD_SHIFT-PAGE_SHIFT) and must not be order-1 since THP requires large folios
>> + * to be at least order-2. Negative value implies that the HW has no preference
>> + * and mm will choose it's own default order.
>> + */
>> +static inline int arch_wants_pte_order(void)
>> +{
>> +       return -1;
>> +}
>> +#endif
>> +
>>  #ifndef __HAVE_ARCH_PTEP_GET_AND_CLEAR
>>  static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
>>                                        unsigned long address,
>> diff --git a/mm/Kconfig b/mm/Kconfig
>> index 09130434e30d..fa61ea160447 100644
>> --- a/mm/Kconfig
>> +++ b/mm/Kconfig
>> @@ -1238,4 +1238,14 @@ config LOCK_MM_AND_FIND_VMA
>>
>>  source "mm/damon/Kconfig"
>>
>> +config LARGE_ANON_FOLIO
>> +       bool "Allocate large folios for anonymous memory"
>> +       depends on TRANSPARENT_HUGEPAGE
>> +       default n
>> +       help
>> +         Use large (bigger than order-0) folios to back anonymous memory where
>> +         possible, even for pte-mapped memory. This reduces the number of page
>> +         faults, as well as other per-page overheads to improve performance for
>> +         many workloads.
>> +
>>  endmenu
>> diff --git a/mm/memory.c b/mm/memory.c
>> index 01f39e8144ef..64c3f242c49a 100644
>> --- a/mm/memory.c
>> +++ b/mm/memory.c
>> @@ -4050,6 +4050,127 @@ vm_fault_t do_swap_page(struct vm_fault *vmf)
>>         return ret;
>>  }
>>
>> +static bool vmf_pte_range_changed(struct vm_fault *vmf, int nr_pages)
>> +{
>> +       int i;
>> +
>> +       if (nr_pages == 1)
>> +               return vmf_pte_changed(vmf);
>> +
>> +       for (i = 0; i < nr_pages; i++) {
>> +               if (!pte_none(ptep_get_lockless(vmf->pte + i)))
>> +                       return true;
>> +       }
>> +
>> +       return false;
>> +}
>> +
>> +#ifdef CONFIG_LARGE_ANON_FOLIO
>> +#define ANON_FOLIO_MAX_ORDER_UNHINTED \
>> +               (ilog2(max_t(unsigned long, SZ_64K, PAGE_SIZE)) - PAGE_SHIFT)
>> +
>> +static int anon_folio_order(struct vm_area_struct *vma)
>> +{
>> +       int order;
>> +
>> +       /*
>> +        * If THP is explicitly disabled for either the vma, the process or the
>> +        * system, then this is very likely intended to limit internal
>> +        * fragmentation; in this case, don't attempt to allocate a large
>> +        * anonymous folio.
>> +        *
>> +        * Else, if the vma is eligible for thp, allocate a large folio of the
>> +        * size preferred by the arch. Or if the arch requested a very small
>> +        * size or didn't request a size, then use PAGE_ALLOC_COSTLY_ORDER,
>> +        * which still meets the arch's requirements but means we still take
>> +        * advantage of SW optimizations (e.g. fewer page faults).
>> +        *
>> +        * Finally if thp is enabled but the vma isn't eligible, take the
>> +        * arch-preferred size and limit it to ANON_FOLIO_MAX_ORDER_UNHINTED.
>> +        * This ensures workloads that have not explicitly opted-in take benefit
>> +        * while capping the potential for internal fragmentation.
>> +        */
>> +
>> +       if ((vma->vm_flags & VM_NOHUGEPAGE) ||
>> +           test_bit(MMF_DISABLE_THP, &vma->vm_mm->flags) ||
>> +           !hugepage_flags_enabled())
>> +               order = 0;
>> +       else {
>> +               order = max(arch_wants_pte_order(), PAGE_ALLOC_COSTLY_ORDER);
>> +
>> +               if (!hugepage_vma_check(vma, vma->vm_flags, false, true, true))
>> +                       order = min(order, ANON_FOLIO_MAX_ORDER_UNHINTED);
>> +       }
>> +
>> +       return order;
>> +}
>> +
>> +static int alloc_anon_folio(struct vm_fault *vmf, struct folio **folio)
>> +{
>> +       int i;
>> +       gfp_t gfp;
>> +       pte_t *pte;
>> +       unsigned long addr;
>> +       struct vm_area_struct *vma = vmf->vma;
>> +       int prefer = anon_folio_order(vma);
>> +       int orders[] = {
>> +               prefer,
>> +               prefer > PAGE_ALLOC_COSTLY_ORDER ? PAGE_ALLOC_COSTLY_ORDER : 0,
>> +               0,
>> +       };
>> +
>> +       *folio = NULL;
>> +
>> +       if (vmf_orig_pte_uffd_wp(vmf))
>> +               goto fallback;
> 
> I think we need to s/vmf_orig_pte_uffd_wp/userfaultfd_armed/ here;
> otherwise UFFD would miss VM_UFFD_MISSING/MINOR.

I don't think this is the case. As far as I can see, VM_UFFD_MINOR only applies
to shmem and hugetlb. VM_UFFD_MISSING is checked under the PTL and if set on the
VMA, then it is handled without mapping the folio that was just allocated:

	/* Deliver the page fault to userland, check inside PT lock */
	if (userfaultfd_missing(vma)) {
		pte_unmap_unlock(vmf->pte, vmf->ptl);
		folio_put(folio);
		return handle_userfault(vmf, VM_UFFD_MISSING);
	}

So we are racing to allocate a large folio; if the vma later turns out to have
MISSING handling registered, we drop the folio and handle it, else we map the
large folio.

The vmf_orig_pte_uffd_wp() *is* required because we need to individually check
each PTE for the uffd_wp bit and fix it up.

So I think the code is correct, but perhaps it is safer/simpler to always avoid
allocating a large folio if the vma is registered for uffd in the way you
suggest? I don't know enough about uffd to form a strong opinion either way.



  reply	other threads:[~2023-08-02  9:33 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-26  9:51 [PATCH v4 0/5] variable-order, large folios for anonymous memory Ryan Roberts
2023-07-26  9:51 ` [PATCH v4 1/5] mm: Non-pmd-mappable, large folios for folio_add_new_anon_rmap() Ryan Roberts
2023-07-26  9:51 ` [PATCH v4 2/5] mm: LARGE_ANON_FOLIO for improved performance Ryan Roberts
2023-07-26 16:41   ` Yu Zhao
2023-07-27  4:31     ` Yu Zhao
2023-07-28 10:13       ` Ryan Roberts
2023-08-01  6:36         ` Yu Zhao
2023-08-01 23:30           ` Yin Fengwei
2023-08-02  8:02           ` Ryan Roberts
2023-08-02  9:04             ` Ryan Roberts
2023-08-02 13:51             ` Yin, Fengwei
2023-08-03  8:05         ` Yin Fengwei
2023-08-03  8:21           ` Ryan Roberts
2023-08-03  8:37             ` Yin Fengwei
2023-08-03  9:32               ` Ryan Roberts
2023-08-03  9:58                 ` Yin Fengwei
2023-08-03 10:27                   ` Ryan Roberts
2023-08-03 10:54                     ` Yin Fengwei
2023-08-04  0:28           ` Yu Zhao
2023-08-01  6:18   ` Yu Zhao
2023-08-02  9:33     ` Ryan Roberts [this message]
2023-08-02 21:05       ` Yu Zhao
2023-08-03 10:24         ` Ryan Roberts
2023-08-03 12:43   ` Ryan Roberts
2023-08-03 14:21     ` Kirill A. Shutemov
2023-08-04  0:19       ` Yu Zhao
2023-08-04  2:16         ` Zi Yan
2023-08-04  3:35           ` Yu Zhao
2023-08-04  9:06         ` Ryan Roberts
2023-08-04 18:53           ` Yu Zhao
2023-08-07 19:00             ` Ryan Roberts
2023-08-03 23:50     ` Yu Zhao
2023-08-04  8:27       ` Ryan Roberts
2023-08-04 20:23         ` David Hildenbrand
2023-08-04 21:00           ` Yu Zhao
2023-08-04 21:13             ` David Hildenbrand
2023-08-04 21:26               ` Yu Zhao
2023-08-04 21:30                 ` David Hildenbrand
2023-08-04 21:58                   ` Zi Yan
2023-08-05  2:50                     ` Yin, Fengwei
2023-08-07 17:45                       ` Ryan Roberts
2023-08-07 18:10                         ` Zi Yan
2023-08-08  9:58                           ` Ryan Roberts
2023-08-07  5:24   ` Yu Zhao
2023-08-07 19:07     ` Ryan Roberts
2023-08-07 23:21       ` Yu Zhao
2023-08-08  9:37         ` Ryan Roberts
2023-08-08 17:57           ` Yu Zhao
2023-08-08 18:12             ` Yu Zhao
2023-08-09 16:08               ` Ryan Roberts
2023-07-26  9:51 ` [PATCH v4 3/5] arm64: mm: Override arch_wants_pte_order() Ryan Roberts
2023-07-26  9:51 ` [PATCH v4 4/5] selftests/mm/cow: Generalize do_run_with_thp() helper Ryan Roberts
2023-07-26  9:51 ` [PATCH v4 5/5] selftests/mm/cow: Add large anon folio tests Ryan Roberts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=c34282b6-fea4-248f-79a2-4a88006dd3b3@arm.com \
    --to=ryan.roberts@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=david@redhat.com \
    --cc=fengwei.yin@intel.com \
    --cc=itaru.kitayama@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mcgrof@kernel.org \
    --cc=shy828301@gmail.com \
    --cc=will@kernel.org \
    --cc=willy@infradead.org \
    --cc=ying.huang@intel.com \
    --cc=yuzhao@google.com \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox