From: Qi Zheng <zhengqi.arch@bytedance.com>
To: David Hildenbrand <david@redhat.com>
Cc: linux@armlinux.org.uk, ezra@easyb.ch, hughd@google.com,
ryan.roberts@arm.com, akpm@linux-foundation.org,
muchun.song@linux.dev, linux-arm-kernel@lists.infradead.org,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Ezra Buehler <ezra.buehler@husqvarnagroup.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v2] arm: pgtable: fix NULL pointer dereference issue
Date: Fri, 14 Feb 2025 16:31:48 +0800 [thread overview]
Message-ID: <c2ae16f5-9ce7-4616-be76-c777d3fa16c6@bytedance.com> (raw)
In-Reply-To: <f15bd993-20de-41ae-8631-9ce557cd9d20@redhat.com>
On 2025/2/14 16:11, David Hildenbrand wrote:
> On 14.02.25 04:03, Qi Zheng wrote:
>> When update_mmu_cache_range() is called by update_mmu_cache(), the vmf
>> parameter is NULL, which will cause a NULL pointer dereference issue in
>> adjust_pte():
>>
>> Unable to handle kernel NULL pointer dereference at virtual address
>> 00000030 when read
>> Hardware name: Atmel AT91SAM9
>> PC is at update_mmu_cache_range+0x1e0/0x278
>> LR is at pte_offset_map_rw_nolock+0x18/0x2c
>> Call trace:
>> update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec
>> remove_migration_pte from rmap_walk_file+0xcc/0x130
>> rmap_walk_file from remove_migration_ptes+0x90/0xa4
>> remove_migration_ptes from migrate_pages_batch+0x6d4/0x858
>> migrate_pages_batch from migrate_pages+0x188/0x488
>> migrate_pages from compact_zone+0x56c/0x954
>> compact_zone from compact_node+0x90/0xf0
>> compact_node from kcompactd+0x1d4/0x204
>> kcompactd from kthread+0x120/0x12c
>> kthread from ret_from_fork+0x14/0x38
>> Exception stack(0xc0d8bfb0 to 0xc0d8bff8)
>>
>> To fix it, do not rely on whether 'ptl' is equal to decide whether to
>> hold
>> the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is
>> enabled. In addition, if two vmas map to the same PTE page, there is no
>> need to hold the pte lock again, otherwise a deadlock will occur. Just
>> add
>> the need_lock parameter to let adjust_pte() know this information.
>>
>> Reported-by: Ezra Buehler <ezra.buehler@husqvarnagroup.com>
>> Closes:
>> https://lore.kernel.org/lkml/CAM1KZSmZ2T_riHvay+7cKEFxoPgeVpHkVFTzVVEQ1BO0cLkHEQ@mail.gmail.com/
>> Fixes: fc9c45b71f43 ("arm: adjust_pte() use pte_offset_map_rw_nolock()")
>> Cc: stable@vger.kernel.org
>> Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
>> ---
>> Changes in v2:
>> - change Ezra's email address (Ezra Buehler)
>> - some cleanups (David Hildenbrand)
>>
>> arch/arm/mm/fault-armv.c | 38 ++++++++++++++++++++++++++------------
>> 1 file changed, 26 insertions(+), 12 deletions(-)
>>
>> diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
>> index 2bec87c3327d2..ea4c4e15f0d31 100644
>> --- a/arch/arm/mm/fault-armv.c
>> +++ b/arch/arm/mm/fault-armv.c
>> @@ -62,7 +62,7 @@ static int do_adjust_pte(struct vm_area_struct *vma,
>> unsigned long address,
>> }
>> static int adjust_pte(struct vm_area_struct *vma, unsigned long
>> address,
>> - unsigned long pfn, struct vm_fault *vmf)
>> + unsigned long pfn, bool need_lock)
>> {
>> spinlock_t *ptl;
>> pgd_t *pgd;
>> @@ -99,12 +99,11 @@ static int adjust_pte(struct vm_area_struct *vma,
>> unsigned long address,
>> if (!pte)
>> return 0;
>> - /*
>> - * If we are using split PTE locks, then we need to take the page
>> - * lock here. Otherwise we are using shared mm->page_table_lock
>> - * which is already locked, thus cannot take it.
>> - */
>> - if (ptl != vmf->ptl) {
>> + if (need_lock) {
>> + /*
>> + * Use nested version here to indicate that we are already
>> + * holding one similar spinlock.
>> + */
>> spin_lock_nested(ptl, SINGLE_DEPTH_NESTING);
>> if (unlikely(!pmd_same(pmdval, pmdp_get_lockless(pmd)))) {
>> pte_unmap_unlock(pte, ptl);
>> @@ -114,7 +113,7 @@ static int adjust_pte(struct vm_area_struct *vma,
>> unsigned long address,
>> ret = do_adjust_pte(vma, address, pfn, pte);
>> - if (ptl != vmf->ptl)
>> + if (need_lock)
>> spin_unlock(ptl);
>> pte_unmap(pte);
>> @@ -123,16 +122,18 @@ static int adjust_pte(struct vm_area_struct
>> *vma, unsigned long address,
>> static void
>> make_coherent(struct address_space *mapping, struct vm_area_struct
>> *vma,
>> - unsigned long addr, pte_t *ptep, unsigned long pfn,
>> - struct vm_fault *vmf)
>> + unsigned long addr, pte_t *ptep, unsigned long pfn)
>> {
>> struct mm_struct *mm = vma->vm_mm;
>> struct vm_area_struct *mpnt;
>> unsigned long offset;
>> + unsigned long pmd_start_addr, pmd_end_addr;
>
> Nit: reverse christmas tree would make us put this line at the very top.
>
> Maybe do the initialization directly:
>
> const unsigned long pmd_start_addr = ALIGN_DOWN(addr, PMD_SIZE);
> const unsigned long pmd_end_addr = pmd_start_addr + PMD_SIZE;
Agree, will do.
>
>> pgoff_t pgoff;
>> int aliases = 0;
>> pgoff = vma->vm_pgoff + ((addr - vma->vm_start) >> PAGE_SHIFT);
>> + pmd_start_addr = ALIGN_DOWN(addr, PMD_SIZE);
>> + pmd_end_addr = pmd_start_addr + PMD_SIZE;
>> /*
>> * If we have any shared mappings that are in the same mm
>> @@ -141,6 +142,14 @@ make_coherent(struct address_space *mapping,
>> struct vm_area_struct *vma,
>> */
>> flush_dcache_mmap_lock(mapping);
>> vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
>> + /*
>> + * If we are using split PTE locks, then we need to take the pte
>> + * lock. Otherwise we are using shared mm->page_table_lock which
>> + * is already locked, thus cannot take it.
>> + */
>> + bool need_lock = IS_ENABLED(CONFIG_SPLIT_PTE_PTLOCKS);
>> + unsigned long mpnt_addr;
>> +
>> /*
>> * If this VMA is not in our MM, we can ignore it.
>> * Note that we intentionally mask out the VMA
>> @@ -151,7 +160,12 @@ make_coherent(struct address_space *mapping,
>> struct vm_area_struct *vma,
>> if (!(mpnt->vm_flags & VM_MAYSHARE))
>> continue;
>> offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
>> - aliases += adjust_pte(mpnt, mpnt->vm_start + offset, pfn, vmf);
>> + mpnt_addr = mpnt->vm_start + offset;
>> +
>> + /* Avoid deadlocks by not grabbing the same PTE lock again. */
>> + if (mpnt_addr >= pmd_start_addr && mpnt_addr < pmd_end_addr)
>> + need_lock = false;
>> + aliases += adjust_pte(mpnt, mpnt_addr, pfn, need_lock);
>> }
>> flush_dcache_mmap_unlock(mapping);
>> if (aliases)
>> @@ -194,7 +208,7 @@ void update_mmu_cache_range(struct vm_fault *vmf,
>> struct vm_area_struct *vma,
>> __flush_dcache_folio(mapping, folio);
>> if (mapping) {
>> if (cache_is_vivt())
>> - make_coherent(mapping, vma, addr, ptep, pfn, vmf);
>> + make_coherent(mapping, vma, addr, ptep, pfn);
>> else if (vma->vm_flags & VM_EXEC)
>> __flush_icache_all();
>> }
>
>
> Apart from that LGTM. Hoping it will work :)
+1
>
> Acked-by: David Hildenbrand <david@redhat.com>
Thanks!
>
prev parent reply other threads:[~2025-02-14 8:32 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-14 3:03 Qi Zheng
2025-02-14 8:11 ` David Hildenbrand
2025-02-14 8:31 ` Qi Zheng [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c2ae16f5-9ce7-4616-be76-c777d3fa16c6@bytedance.com \
--to=zhengqi.arch@bytedance.com \
--cc=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=ezra.buehler@husqvarnagroup.com \
--cc=ezra@easyb.ch \
--cc=hughd@google.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=muchun.song@linux.dev \
--cc=ryan.roberts@arm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox