Re: [RFC PATCH v4 5/5] mm/filemap: Allow arch to request folio size for exec memory

[Jan Kara <jack@suse.cz>]

On Wed 30-04-25 15:59:18, Ryan Roberts wrote:
> Change the readahead config so that if it is being requested for an
> executable mapping, do a synchronous read into a set of folios with an
> arch-specified order and in a naturally aligned manner. We no longer
> center the read on the faulting page but simply align it down to the
> previous natural boundary. Additionally, we don't bother with an
> asynchronous part.
> 
> On arm64 if memory is physically contiguous and naturally aligned to the
> "contpte" size, we can use contpte mappings, which improves utilization
> of the TLB. When paired with the "multi-size THP" feature, this works
> well to reduce dTLB pressure. However iTLB pressure is still high due to
> executable mappings having a low likelihood of being in the required
> folio size and mapping alignment, even when the filesystem supports
> readahead into large folios (e.g. XFS).
> 
> The reason for the low likelihood is that the current readahead
> algorithm starts with an order-0 folio and increases the folio order by
> 2 every time the readahead mark is hit. But most executable memory tends
> to be accessed randomly and so the readahead mark is rarely hit and most
> executable folios remain order-0.
> 
> So let's special-case the read(ahead) logic for executable mappings. The
> trade-off is performance improvement (due to more efficient storage of
> the translations in iTLB) vs potential for making reclaim more difficult
> (due to the folios being larger so if a part of the folio is hot the
> whole thing is considered hot). But executable memory is a small portion
> of the overall system memory so I doubt this will even register from a
> reclaim perspective.
> 
> I've chosen 64K folio size for arm64 which benefits both the 4K and 16K
> base page size configs. Crucially the same amount of data is still read
> (usually 128K) so I'm not expecting any read amplification issues. I
> don't anticipate any write amplification because text is always RO.
> 
> Note that the text region of an ELF file could be populated into the
> page cache for other reasons than taking a fault in a mmapped area. The
> most common case is due to the loader read()ing the header which can be
> shared with the beginning of text. So some text will still remain in
> small folios, but this simple, best effort change provides good
> performance improvements as is.
> 
> Confine this special-case approach to the bounds of the VMA. This
> prevents wasting memory for any padding that might exist in the file
> between sections. Previously the padding would have been contained in
> order-0 folios and would be easy to reclaim. But now it would be part of
> a larger folio so more difficult to reclaim. Solve this by simply not
> reading it into memory in the first place.
> 
> Benchmarking
> ============
> TODO: NUMBERS ARE FOR V3 OF SERIES. NEED TO RERUN FOR THIS VERSION.
> 
> The below shows nginx and redis benchmarks on Ampere Altra arm64 system.
> 
> First, confirmation that this patch causes more text to be contained in
> 64K folios:
> 
> | File-backed folios     |   system boot   |      nginx      |      redis      |
> | by size as percentage  |-----------------|-----------------|-----------------|
> | of all mapped text mem | before |  after | before |  after | before |  after |
> |========================|========|========|========|========|========|========|
> | base-page-4kB          |    26% |     9% |    27% |     6% |    21% |     5% |
> | thp-aligned-8kB        |     4% |     2% |     3% |     0% |     4% |     1% |
> | thp-aligned-16kB       |    57% |    21% |    57% |     6% |    54% |    10% |
> | thp-aligned-32kB       |     4% |     1% |     4% |     1% |     3% |     1% |
> | thp-aligned-64kB       |     7% |    65% |     8% |    85% |     9% |    72% |
> | thp-aligned-2048kB     |     0% |     0% |     0% |     0% |     7% |     8% |
> | thp-unaligned-16kB     |     1% |     1% |     1% |     1% |     1% |     1% |
> | thp-unaligned-32kB     |     0% |     0% |     0% |     0% |     0% |     0% |
> | thp-unaligned-64kB     |     0% |     0% |     0% |     1% |     0% |     1% |
> | thp-partial            |     1% |     1% |     0% |     0% |     1% |     1% |
> |------------------------|--------|--------|--------|--------|--------|--------|
> | cont-aligned-64kB      |     7% |    65% |     8% |    85% |    16% |    80% |
> 
> The above shows that for both workloads (each isolated with cgroups) as
> well as the general system state after boot, the amount of text backed
> by 4K and 16K folios reduces and the amount backed by 64K folios
> increases significantly. And the amount of text that is contpte-mapped
> significantly increases (see last row).
> 
> And this is reflected in performance improvement:
> 
> | Benchmark                                     |          Improvement |
> +===============================================+======================+
> | pts/nginx (200 connections)                   |                8.96% |
> | pts/nginx (1000 connections)                  |                6.80% |
> +-----------------------------------------------+----------------------+
> | pts/redis (LPOP, 50 connections)              |                5.07% |
> | pts/redis (LPUSH, 50 connections)             |                3.68% |
> 
> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>

Looks good to me. Feel free to add:

Reviewed-by: Jan Kara <jack@suse.cz>

								Honza

> diff --git a/mm/filemap.c b/mm/filemap.c
> index e61f374068d4..37fe4a55c00d 100644
> --- a/mm/filemap.c
> +++ b/mm/filemap.c
> @@ -3252,14 +3252,40 @@ static struct file *do_sync_mmap_readahead(struct vm_fault *vmf)
>  	if (mmap_miss > MMAP_LOTSAMISS)
>  		return fpin;
>  
> -	/*
> -	 * mmap read-around
> -	 */
>  	fpin = maybe_unlock_mmap_for_io(vmf, fpin);
> -	ra->start = max_t(long, 0, vmf->pgoff - ra->ra_pages / 2);
> -	ra->size = ra->ra_pages;
> -	ra->async_size = ra->ra_pages / 4;
> -	ra->order = 0;
> +	if (vm_flags & VM_EXEC) {
> +		/*
> +		 * Allow arch to request a preferred minimum folio order for
> +		 * executable memory. This can often be beneficial to
> +		 * performance if (e.g.) arm64 can contpte-map the folio.
> +		 * Executable memory rarely benefits from readahead, due to its
> +		 * random access nature, so set async_size to 0.
> +		 *
> +		 * Limit to the boundaries of the VMA to avoid reading in any
> +		 * pad that might exist between sections, which would be a waste
> +		 * of memory.
> +		 */
> +		struct vm_area_struct *vma = vmf->vma;
> +		unsigned long start = vma->vm_pgoff;
> +		unsigned long end = start + ((vma->vm_end - vma->vm_start) >> PAGE_SHIFT);
> +		unsigned long ra_end;
> +
> +		ra->order = exec_folio_order();
> +		ra->start = round_down(vmf->pgoff, 1UL << ra->order);
> +		ra->start = max(ra->start, start);
> +		ra_end = round_up(ra->start + ra->ra_pages, 1UL << ra->order);
> +		ra_end = min(ra_end, end);
> +		ra->size = ra_end - ra->start;
> +		ra->async_size = 0;
> +	} else {
> +		/*
> +		 * mmap read-around
> +		 */
> +		ra->start = max_t(long, 0, vmf->pgoff - ra->ra_pages / 2);
> +		ra->size = ra->ra_pages;
> +		ra->async_size = ra->ra_pages / 4;
> +		ra->order = 0;
> +	}
>  	ractl._index = ra->start;
>  	page_cache_ra_order(&ractl, ra);
>  	return fpin;
> -- 
> 2.43.0
> 
-- 
Jan Kara <jack@suse.com>
SUSE Labs, CR