linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Hugh Dickins <hughd@google.com>
To: Mel Gorman <mgorman@techsingularity.net>,
	Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Tejun Heo <tj@kernel.org>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: Is it safe for kthreadd to drain_all_pages?
Date: Thu, 6 Apr 2017 11:52:43 -0700 (PDT)	[thread overview]
Message-ID: <alpine.LSU.2.11.1704061134240.17094@eggly.anvils> (raw)
In-Reply-To: <20170406130614.a6ygueggpwseqysd@techsingularity.net>

On Thu, 6 Apr 2017, Mel Gorman wrote:
> On Wed, Apr 05, 2017 at 01:59:49PM -0700, Hugh Dickins wrote:
> > Hi Mel,
> > 
> > I suspect that it's not safe for kthreadd to drain_all_pages();
> > but I haven't studied flush_work() etc, so don't really know what
> > I'm talking about: hoping that you will jump to a realization.
> > 
> 
> You're right, it's not safe. If kthreadd is creating the workqueue
> thread to do the drain and it'll recurse into itself.
> 
> > 4.11-rc has been giving me hangs after hours of swapping load.  At
> > first they looked like memory leaks ("fork: Cannot allocate memory");
> > but for no good reason I happened to do "cat /proc/sys/vm/stat_refresh"
> > before looking at /proc/meminfo one time, and the stat_refresh stuck
> > in D state, waiting for completion of flush_work like many kworkers.
> > kthreadd waiting for completion of flush_work in drain_all_pages().
> > 
> 
> It's asking itself to do work in all likelihood.
> 
> > Patch below has been running well for 36 hours now:
> > a bit too early to be sure, but I think it's time to turn to you.
> > 
> 
> I think the patch is valid but like Michal, would appreciate if you
> could run the patch he linked to see if it also side-steps the same
> problem. 
> 
> Good spot!

Thank you both for explanations, and direction to the two "drainging"
patches.  I've put those on to 4.11-rc5 (and double-checked that I've
taken mine off), and set it going.  Fine so far but much too soon to
tell - mine did 56 hours with clean /var/log/messages before I switched,
so I demand no less of Michal's :).  I'll report back tomorrow and the
day after (unless badness appears sooner once I'm home).

Hugh

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2017-04-06 18:52 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-05 20:59 Hugh Dickins
2017-04-06  8:55 ` Michal Hocko
2017-04-06 13:06 ` Mel Gorman
2017-04-06 18:52   ` Hugh Dickins [this message]
2017-04-07 16:25     ` Hugh Dickins
2017-04-07 16:39       ` Michal Hocko
2017-04-07 16:58         ` Hugh Dickins
2017-04-07 17:29           ` Michal Hocko
2017-04-07 18:46             ` Hugh Dickins
2017-04-08 17:04               ` Hugh Dickins
2017-04-08 18:09                 ` Mel Gorman
2017-04-13 17:56                   ` Andrea Arcangeli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LSU.2.11.1704061134240.17094@eggly.anvils \
    --to=hughd@google.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox