From: Hugh Dickins <hughd@google.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Andrea Arcangeli <aarcange@redhat.com>,
Andres Lagar-Cavilla <andreslc@google.com>,
Yang Shi <yang.shi@linaro.org>, Ning Qu <quning@gmail.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: [PATCH 01/10] mm: update_lru_size warn and reset bad lru_size
Date: Tue, 5 Apr 2016 13:40:04 -0700 (PDT) [thread overview]
Message-ID: <alpine.LSU.2.11.1604051337450.5965@eggly.anvils> (raw)
In-Reply-To: <alpine.LSU.2.11.1604051329480.5965@eggly.anvils>
Though debug kernels have a VM_BUG_ON to help protect from misaccounting
lru_size, non-debug kernels are liable to wrap it around: and then the
vast unsigned long size draws page reclaim into a loop of repeatedly
doing nothing on an empty list, without even a cond_resched().
That soft lockup looks confusingly like an over-busy reclaim scenario,
with lots of contention on the lru_lock in shrink_inactive_list():
yet has a totally different origin.
Help differentiate with a custom warning in mem_cgroup_update_lru_size(),
even in non-debug kernels; and reset the size to avoid the lockup. But
the particular bug which suggested this change was mine alone, and since
fixed.
Make it a WARN_ONCE: the first occurrence is the most informative, a
flurry may follow, yet even when rate-limited little more is learnt.
Signed-off-by: Hugh Dickins <hughd@google.com>
---
include/linux/mm_inline.h | 2 +-
mm/memcontrol.c | 24 ++++++++++++++++++++----
2 files changed, 21 insertions(+), 5 deletions(-)
--- a/include/linux/mm_inline.h
+++ b/include/linux/mm_inline.h
@@ -35,8 +35,8 @@ static __always_inline void del_page_fro
struct lruvec *lruvec, enum lru_list lru)
{
int nr_pages = hpage_nr_pages(page);
- mem_cgroup_update_lru_size(lruvec, lru, -nr_pages);
list_del(&page->lru);
+ mem_cgroup_update_lru_size(lruvec, lru, -nr_pages);
__mod_zone_page_state(lruvec_zone(lruvec), NR_LRU_BASE + lru, -nr_pages);
}
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1022,22 +1022,38 @@ out:
* @lru: index of lru list the page is sitting on
* @nr_pages: positive when adding or negative when removing
*
- * This function must be called when a page is added to or removed from an
- * lru list.
+ * This function must be called under lru_lock, just before a page is added
+ * to or just after a page is removed from an lru list (that ordering being
+ * so as to allow it to check that lru_size 0 is consistent with list_empty).
*/
void mem_cgroup_update_lru_size(struct lruvec *lruvec, enum lru_list lru,
int nr_pages)
{
struct mem_cgroup_per_zone *mz;
unsigned long *lru_size;
+ long size;
+ bool empty;
if (mem_cgroup_disabled())
return;
mz = container_of(lruvec, struct mem_cgroup_per_zone, lruvec);
lru_size = mz->lru_size + lru;
- *lru_size += nr_pages;
- VM_BUG_ON((long)(*lru_size) < 0);
+ empty = list_empty(lruvec->lists + lru);
+
+ if (nr_pages < 0)
+ *lru_size += nr_pages;
+
+ size = *lru_size;
+ if (WARN_ONCE(size < 0 || empty != !size,
+ "%s(%p, %d, %d): lru_size %ld but %sempty\n",
+ __func__, lruvec, lru, nr_pages, size, empty ? "" : "not ")) {
+ VM_BUG_ON(1);
+ *lru_size = 0;
+ }
+
+ if (nr_pages > 0)
+ *lru_size += nr_pages;
}
bool task_in_mem_cgroup(struct task_struct *task, struct mem_cgroup *memcg)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2016-04-05 20:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-05 20:37 [PATCH 00/10] mm: easy preliminaries to THPagecache Hugh Dickins
2016-04-05 20:40 ` Hugh Dickins [this message]
2016-04-14 11:56 ` [PATCH 01/10] mm: update_lru_size warn and reset bad lru_size Vlastimil Babka
2016-04-05 20:42 ` [PATCH 02/10] mm: update_lru_size do the __mod_zone_page_state Hugh Dickins
2016-04-05 20:44 ` [PATCH 03/10] mm: use __SetPageSwapBacked and dont ClearPageSwapBacked Hugh Dickins
2016-04-06 9:52 ` Mel Gorman
2016-04-05 20:45 ` [PATCH 04/10] tmpfs: preliminary minor tidyups Hugh Dickins
2016-04-05 20:47 ` [PATCH 05/10] tmpfs: mem_cgroup charge fault to vm_mm not current mm Hugh Dickins
2016-04-05 20:49 ` [PATCH 06/10] mm: /proc/sys/vm/stat_refresh to force vmstat update Hugh Dickins
2016-04-05 20:51 ` [PATCH 07/10] huge mm: move_huge_pmd does not need new_vma Hugh Dickins
2016-04-11 10:28 ` Kirill A. Shutemov
2016-04-05 20:52 ` [PATCH 08/10] huge pagecache: extend mremap pmd rmap lockout to files Hugh Dickins
2016-04-11 10:32 ` Kirill A. Shutemov
2016-04-05 20:55 ` [PATCH 09/10] huge pagecache: mmap_sem is unlocked when truncation splits pmd Hugh Dickins
2016-04-11 10:35 ` Kirill A. Shutemov
2016-04-14 17:39 ` Matthew Wilcox
2016-04-16 4:55 ` Andrew Morton
2016-04-05 21:02 ` [PATCH 10/10] arch: fix has_transparent_hugepage() Hugh Dickins
2016-04-05 23:25 ` David Miller
2016-04-06 3:22 ` Vineet Gupta
2016-04-06 6:58 ` Ingo Molnar
2016-04-06 12:29 ` Chris Metcalf
2016-04-06 21:58 ` Ingo Molnar
2016-04-06 11:56 ` Gerald Schaefer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LSU.2.11.1604051337450.5965@eggly.anvils \
--to=hughd@google.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=andreslc@google.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=quning@gmail.com \
--cc=yang.shi@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox