linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Nicolas Pitre <nico@cam.org>
To: lkml <linux-kernel@vger.kernel.org>,
	linux-mm@kvack.org, Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan.kim@gmail.com>,
	Russell King - ARM Linux <linux@arm.linux.org.uk>
Subject: [PATCH] atomic highmem kmap page pinning
Date: Sat, 07 Mar 2009 17:42:44 -0500 (EST)	[thread overview]
Message-ID: <alpine.LFD.2.00.0903071731120.30483@xanadu.home> (raw)


Discussion about this patch is settling, so I'd like to know if there 
are more comments, or if official ACKs could be provided.  If people 
agree I'd like to carry this patch in my ARM highmem patch series since 
a couple things depend on this.

Andrew: You seemed OK with the original one.  Does this one pass your 
grottiness test?

Anyone else?

----- >8
From: Nicolas Pitre <nico@cam.org>
Date: Wed, 4 Mar 2009 22:49:41 -0500
Subject: [PATCH] atomic highmem kmap page pinning

Most ARM machines have a non IO coherent cache, meaning that the
dma_map_*() set of functions must clean and/or invalidate the affected
memory manually before DMA occurs.  And because the majority of those
machines have a VIVT cache, the cache maintenance operations must be
performed using virtual
addresses.

When a highmem page is kunmap'd, its mapping (and cache) remains in place
in case it is kmap'd again. However if dma_map_page() is then called with
such a page, some cache maintenance on the remaining mapping must be
performed. In that case, page_address(page) is non null and we can use
that to synchronize the cache.

It is unlikely but still possible for kmap() to race and recycle the
virtual address obtained above, and use it for another page before some
on-going cache invalidation loop in dma_map_page() is done. In that case,
the new mapping could end up with dirty cache lines for another page,
and the unsuspecting cache invalidation loop in dma_map_page() might
simply discard those dirty cache lines resulting in data loss.

For example, let's consider this sequence of events:

	- dma_map_page(..., DMA_FROM_DEVICE) is called on a highmem page.

	-->	- vaddr = page_address(page) is non null. In this case
		it is likely that the page has valid cache lines
		associated with vaddr. Remember that the cache is VIVT.

		-->	for (i = vaddr; i < vaddr + PAGE_SIZE; i += 32)
				invalidate_cache_line(i);

	*** preemption occurs in the middle of the loop above ***

	- kmap_high() is called for a different page.

	-->	- last_pkmap_nr wraps to zero and flush_all_zero_pkmaps()
		  is called.  The pkmap_count value for the page passed
		  to dma_map_page() above happens to be 1, so the page
		  is unmapped.  But prior to that, flush_cache_kmaps()
		  cleared the cache for it.  So far so good.

		- A fresh pkmap entry is assigned for this kmap request.
		  The Murphy law says this pkmap entry will eventually
		  happen to use the same vaddr as the one which used to
		  belong to the other page being processed by
		  dma_map_page() in the preempted thread above.

	- The kmap_high() caller start dirtying the cache using the
	  just assigned virtual mapping for its page.

	*** the first thread is rescheduled ***

			- The for(...) loop is resumed, but now cached
			  data belonging to a different physical page is
			  being discarded !

And this is not only a preemption issue as ARM can be SMP as well,
making the above scenario just as likely. Hence the need for some kind
of pkmap page pinning which can be used in any context, primarily for
the benefit of dma_map_page() on ARM.

This provides the necessary interface to cope with the above issue if
ARCH_NEEDS_KMAP_HIGH_GET is defined, otherwise the resulting code is
unchanged.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Reviewed-by: MinChan Kim <minchan.kim@gmail.com>
---
 mm/highmem.c |   65 +++++++++++++++++++++++++++++++++++++++++++++------
 1 files changed, 57 insertions(+), 8 deletions(-)

diff --git a/mm/highmem.c b/mm/highmem.c
index b36b83b..cc61399 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -67,6 +67,25 @@ pte_t * pkmap_page_table;
 
 static DECLARE_WAIT_QUEUE_HEAD(pkmap_map_wait);
 
+/*
+ * Most architectures have no use for kmap_high_get(), so let's abstract
+ * the disabling of IRQ out of the locking in that case to save on a
+ * potential useless overhead.
+ */
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+#define spin_lock_kmap()             spin_lock_irq(&kmap_lock)
+#define spin_unlock_kmap()           spin_unlock_irq(&kmap_lock)
+#define spin_lock_kmap_any(flags)    spin_lock_irqsave(&kmap_lock, flags)
+#define spin_unlock_kmap_any(flags)  spin_unlock_irqrestore(&kmap_lock, flags)
+#else
+#define spin_lock_kmap()             spin_lock(&kmap_lock)
+#define spin_unlock_kmap()           spin_unlock(&kmap_lock)
+#define spin_lock_kmap_any(flags)    \
+	do { spin_lock(&kmap_lock); (void)(flags); } while (0)
+#define spin_unlock_kmap_any(flags)  \
+	do { spin_unlock(&kmap_lock); (void)(flags); } while (0)
+#endif
+
 static void flush_all_zero_pkmaps(void)
 {
 	int i;
@@ -113,9 +132,9 @@ static void flush_all_zero_pkmaps(void)
  */
 void kmap_flush_unused(void)
 {
-	spin_lock(&kmap_lock);
+	spin_lock_kmap();
 	flush_all_zero_pkmaps();
-	spin_unlock(&kmap_lock);
+	spin_unlock_kmap();
 }
 
 static inline unsigned long map_new_virtual(struct page *page)
@@ -145,10 +164,10 @@ start:
 
 			__set_current_state(TASK_UNINTERRUPTIBLE);
 			add_wait_queue(&pkmap_map_wait, &wait);
-			spin_unlock(&kmap_lock);
+			spin_unlock_kmap();
 			schedule();
 			remove_wait_queue(&pkmap_map_wait, &wait);
-			spin_lock(&kmap_lock);
+			spin_lock_kmap();
 
 			/* Somebody else might have mapped it while we slept */
 			if (page_address(page))
@@ -184,29 +203,59 @@ void *kmap_high(struct page *page)
 	 * For highmem pages, we can't trust "virtual" until
 	 * after we have the lock.
 	 */
-	spin_lock(&kmap_lock);
+	spin_lock_kmap();
 	vaddr = (unsigned long)page_address(page);
 	if (!vaddr)
 		vaddr = map_new_virtual(page);
 	pkmap_count[PKMAP_NR(vaddr)]++;
 	BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 2);
-	spin_unlock(&kmap_lock);
+	spin_unlock_kmap();
 	return (void*) vaddr;
 }
 
 EXPORT_SYMBOL(kmap_high);
 
+#ifdef ARCH_NEEDS_KMAP_HIGH_GET
+/**
+ * kmap_high_get - pin a highmem page into memory
+ * @page: &struct page to pin
+ *
+ * Returns the page's current virtual memory address, or NULL if no mapping
+ * exists.  When and only when a non null address is returned then a
+ * matching call to kunmap_high() is necessary.
+ *
+ * This can be called from any context.
+ */
+void *kmap_high_get(struct page *page)
+{
+	unsigned long vaddr, flags;
+
+	spin_lock_kmap_any(flags);
+	vaddr = (unsigned long)page_address(page);
+	if (vaddr) {
+		BUG_ON(pkmap_count[PKMAP_NR(vaddr)] < 1);
+		pkmap_count[PKMAP_NR(vaddr)]++;
+	}
+	spin_unlock_kmap_any(flags);
+	return (void*) vaddr;
+}
+#endif
+
 /**
  * kunmap_high - map a highmem page into memory
  * @page: &struct page to unmap
+ *
+ * If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called
+ * only from user context.
  */
 void kunmap_high(struct page *page)
 {
 	unsigned long vaddr;
 	unsigned long nr;
+	unsigned long flags;
 	int need_wakeup;
 
-	spin_lock(&kmap_lock);
+	spin_lock_kmap_any(flags);
 	vaddr = (unsigned long)page_address(page);
 	BUG_ON(!vaddr);
 	nr = PKMAP_NR(vaddr);
@@ -232,7 +281,7 @@ void kunmap_high(struct page *page)
 		 */
 		need_wakeup = waitqueue_active(&pkmap_map_wait);
 	}
-	spin_unlock(&kmap_lock);
+	spin_unlock_kmap_any(flags);
 
 	/* do wake-up, if needed, race-free outside of the spin lock */
 	if (need_wakeup)

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

             reply	other threads:[~2009-03-07 22:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-07 22:42 Nicolas Pitre [this message]
2009-03-09 20:31 ` Andrew Morton
2009-03-10  1:11   ` Nicolas Pitre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.00.0903071731120.30483@xanadu.home \
    --to=nico@cam.org \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=minchan.kim@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox