From: Harry Yoo <harry.yoo@oracle.com>
To: Lokesh Gidra <lokeshgidra@google.com>
Cc: akpm@linux-foundation.org, linux-mm@kvack.org,
kaleshsingh@google.com, ngeoffray@google.com,
David Hildenbrand <david@redhat.com>,
Lorenzo Stoakes <lorenzo.stoakes@oracle.com>,
Peter Xu <peterx@redhat.com>,
Suren Baghdasaryan <surenb@google.com>,
Barry Song <baohua@kernel.org>, SeongJae Park <sj@kernel.org>,
Miaohe Lin <linmiaohe@huawei.com>,
Naoya Horiguchi <nao.horiguchi@gmail.com>
Subject: Re: [RFC PATCH 1/2] mm: always call rmap_walk() on locked folios
Date: Wed, 10 Sep 2025 19:10:15 +0900 [thread overview]
Message-ID: <aMFOh1NxaIP0GtGE@hyeyoo> (raw)
In-Reply-To: <20250908044950.311548-1-lokeshgidra@google.com>
On Sun, Sep 07, 2025 at 09:49:49PM -0700, Lokesh Gidra wrote:
> Prior discussion about this can be found at [1].
>
> rmap_walk() requires all folios, except non-KSM anon, to be locked. This
> implies that when threads update folio->mapping to an anon_vma with
> different root (currently only done by UFFDIO MOVE), they have to
> serialize against rmap_walk() with write-lock on the anon_vma, hurting
> scalability. Furthermore, this necessitates rechecking anon_vma when
> pinning/locking an anon_vma (like in folio_lock_anon_vma_read()).
>
> This can be simplified quite a bit by ensuring that rmap_walk() is
> always called on locked folios. Among the few callers of rmap_walk() on
> unlocked anon folios, shrink_active_list()->folio_referenced() is the
> only performance critical one.
>
> shrink_active_list() doesn't act differently depending on what
> folio_referenced() returns for an anon folio. So returning 1 when it
> is contended, like in case of other folio types, wouldn't have any
> negative impact.
>
> Furthermore, as David pointed out in the previous discussion [2], this
> could potentially only affect R/O pages after fork as PG_anon_exclusive
> is not set. But, such folios are already isolated (prior to calling
> folio_referenced()) by grabbing a reference and clearing LRU, so
> do_wp_page()->wp_can_reuse_anon_folio() would not reuse such folios
> anyways.
>
> [1] https://lore.kernel.org/all/CA*EESO4Z6wtX7ZMdDHQRe5jAAS_bQ-POq5*4aDx5jh2DvY6UHg@mail.gmail.com
> [2] https://lore.kernel.org/all/dc92aef8-757f-4432-923e-70d92d13fb37@redhat.com
>
> CC: David Hildenbrand <david@redhat.com>
> CC: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
> CC: Harry Yoo <harry.yoo@oracle.com>
> CC: Peter Xu <peterx@redhat.com>
> CC: Suren Baghdasaryan <surenb@google.com>
> CC: Barry Song <baohua@kernel.org>
> CC: SeongJae Park <sj@kernel.org>
> Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
> ---
> mm/damon/ops-common.c | 16 ++++------------
> mm/page_idle.c | 8 ++------
> mm/rmap.c | 40 ++++++++++------------------------------
> 3 files changed, 16 insertions(+), 48 deletions(-)
>
> @@ -557,17 +554,6 @@ struct anon_vma *folio_lock_anon_vma_read(const struct folio *folio,
> anon_vma = (struct anon_vma *) (anon_mapping - FOLIO_MAPPING_ANON);
> root_anon_vma = READ_ONCE(anon_vma->root);
> if (down_read_trylock(&root_anon_vma->rwsem)) {
> - /*
> - * folio_move_anon_rmap() might have changed the anon_vma as we
> - * might not hold the folio lock here.
> - */
> - if (unlikely((unsigned long)READ_ONCE(folio->mapping) !=
> - anon_mapping)) {
> - up_read(&root_anon_vma->rwsem);
> - rcu_read_unlock();
> - goto retry;
> - }
> -
folio_lock_anon_vma_read() can be called without folio lock in a path:
memory_failure() -> kill_procs_now() -> collect_procs() ->
collect_procs_anon().
Not sure why collect_procs_{anon,ksm,file,fsdax} do not use rmap_walk()
functionality :/
Should we take folio lock before calling kill_procs_now() in
memory_failure()?
--
Cheers,
Harry / Hyeonggon
next prev parent reply other threads:[~2025-09-10 10:10 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-08 4:49 Lokesh Gidra
2025-09-08 4:49 ` [RFC PATCH 2/2] userfaultfd: remove anon-vma lock for moving folios in MOVE ioctl Lokesh Gidra
2025-09-11 20:07 ` Lorenzo Stoakes
2025-09-12 9:15 ` David Hildenbrand
2025-09-08 21:47 ` [RFC PATCH 1/2] mm: always call rmap_walk() on locked folios Barry Song
2025-09-08 22:12 ` Lokesh Gidra
2025-09-09 0:40 ` Barry Song
2025-09-09 5:37 ` Lokesh Gidra
2025-09-09 5:51 ` Barry Song
2025-09-09 5:56 ` Lokesh Gidra
2025-09-09 6:01 ` Barry Song
2025-09-11 19:05 ` Lokesh Gidra
2025-09-12 5:10 ` Barry Song
2025-09-10 10:10 ` Harry Yoo [this message]
2025-09-10 15:33 ` Lokesh Gidra
2025-09-11 8:40 ` Harry Yoo
2025-09-12 3:29 ` Miaohe Lin
2025-09-11 19:39 ` Lorenzo Stoakes
2025-09-12 9:03 ` David Hildenbrand
2025-09-13 4:27 ` Lokesh Gidra
2025-09-15 11:27 ` Lorenzo Stoakes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aMFOh1NxaIP0GtGE@hyeyoo \
--to=harry.yoo@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=david@redhat.com \
--cc=kaleshsingh@google.com \
--cc=linmiaohe@huawei.com \
--cc=linux-mm@kvack.org \
--cc=lokeshgidra@google.com \
--cc=lorenzo.stoakes@oracle.com \
--cc=nao.horiguchi@gmail.com \
--cc=ngeoffray@google.com \
--cc=peterx@redhat.com \
--cc=sj@kernel.org \
--cc=surenb@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox