From: Fan Ni <nifan.cxl@gmail.com>
To: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: nifan.cxl@gmail.com, muchun.song@linux.dev, willy@infradead.org,
mcgrof@kernel.org, a.manzanares@samsung.com, dave@stgolabs.net,
akpm@linux-foundation.org, david@redhat.com, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 3/3] mm/hugetlb: Refactor __unmap_hugepage_range() to take folio instead of page
Date: Thu, 17 Apr 2025 09:34:00 -0700 [thread overview]
Message-ID: <aAEteJh4Gb8R7gPm@debian> (raw)
In-Reply-To: <daaeffe6-f9b8-4923-a273-0dab573aa749@oracle.com>
On Thu, Apr 17, 2025 at 12:21:55PM -0400, Sidhartha Kumar wrote:
> On 4/17/25 11:43 AM, nifan.cxl@gmail.com wrote:
> > From: Fan Ni <fan.ni@samsung.com>
> >
> > The function __unmap_hugepage_range() has two kinds of users:
> > 1) unmap_hugepage_range(), which passes in the head page of a folio.
> > Since unmap_hugepage_range() already takes folio and there are no other
> > uses of the folio struct in the function, it is natural for
> > __unmap_hugepage_range() to take folio also.
> > 2) All other uses, which pass in NULL pointer.
> >
> > In both cases, we can pass in folio. Refactor __unmap_hugepage_range() to
> > take folio.
> >
> > Signed-off-by: Fan Ni <fan.ni@samsung.com>
> > ---
> >
> > Question: If the change in the patch makes sense, should we try to convert all
> > "page" uses in __unmap_hugepage_range() to folio?
> >
>
> For this to be correct, we have to ensure that the pte in:
>
> page = pte_page(pte);
>
> only refers to the pte of a head page. pte comes from:
>
> pte = huge_ptep_get(mm, address, ptep);
>
> and in the for loop above:
>
> for (; address < end; address += sz)
>
> address is incremented by the huge page size so I think address here only
> points to head pages of hugetlb folios and it would make sense to convert
> page to folio here.
>
Thanks Sidhartha for reviewing the series. I have similar understanding and
wanted to get confirmation from experts in this area.
Thanks.
Fan
> > ---
> > include/linux/hugetlb.h | 2 +-
> > mm/hugetlb.c | 10 +++++-----
> > 2 files changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
> > index b7699f35c87f..d6c503dd2f7d 100644
> > --- a/include/linux/hugetlb.h
> > +++ b/include/linux/hugetlb.h
> > @@ -133,7 +133,7 @@ void unmap_hugepage_range(struct vm_area_struct *,
> > void __unmap_hugepage_range(struct mmu_gather *tlb,
> > struct vm_area_struct *vma,
> > unsigned long start, unsigned long end,
> > - struct page *ref_page, zap_flags_t zap_flags);
> > + struct folio *ref_folio, zap_flags_t zap_flags);
> > void hugetlb_report_meminfo(struct seq_file *);
> > int hugetlb_report_node_meminfo(char *buf, int len, int nid);
> > void hugetlb_show_meminfo_node(int nid);
> > diff --git a/mm/hugetlb.c b/mm/hugetlb.c
> > index 3181dbe0c4bb..7d280ab23784 100644
> > --- a/mm/hugetlb.c
> > +++ b/mm/hugetlb.c
> > @@ -5833,7 +5833,7 @@ int move_hugetlb_page_tables(struct vm_area_struct *vma,
> > void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
> > unsigned long start, unsigned long end,
> > - struct page *ref_page, zap_flags_t zap_flags)
> > + struct folio *ref_folio, zap_flags_t zap_flags)
> > {
> > struct mm_struct *mm = vma->vm_mm;
> > unsigned long address;
> > @@ -5910,8 +5910,8 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
> > * page is being unmapped, not a range. Ensure the page we
> > * are about to unmap is the actual page of interest.
> > */
> > - if (ref_page) {
> > - if (page != ref_page) {
> > + if (ref_folio) {
> > + if (page != folio_page(ref_folio, 0)) {
> > spin_unlock(ptl);
> > continue;
> > }
> > @@ -5977,7 +5977,7 @@ void __unmap_hugepage_range(struct mmu_gather *tlb, struct vm_area_struct *vma,
> > /*
> > * Bail out after unmapping reference page if supplied
> > */
> > - if (ref_page)
> > + if (ref_folio)
> > break;
> > }
> > tlb_end_vma(tlb, vma);
> > @@ -6052,7 +6052,7 @@ void unmap_hugepage_range(struct vm_area_struct *vma, unsigned long start,
> > tlb_gather_mmu(&tlb, vma->vm_mm);
> > __unmap_hugepage_range(&tlb, vma, start, end,
> > - folio_page(ref_folio, 0), zap_flags);
> > + ref_folio, zap_flags);
> > mmu_notifier_invalidate_range_end(&range);
> > tlb_finish_mmu(&tlb);
> Reviewed-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
next prev parent reply other threads:[~2025-04-17 16:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-04-17 15:43 [PATCH 1/3] mm/hugetlb: Refactor unmap_ref_private() " nifan.cxl
2025-04-17 15:43 ` [PATCH 2/3] mm/hugetlb: Refactor unmap_hugepage_range() " nifan.cxl
2025-04-17 16:13 ` Sidhartha Kumar
2025-04-18 2:51 ` Muchun Song
2025-04-17 15:43 ` [PATCH 3/3] mm/hugetlb: Refactor __unmap_hugepage_range() " nifan.cxl
2025-04-17 16:21 ` Sidhartha Kumar
2025-04-17 16:34 ` Fan Ni [this message]
2025-04-18 3:03 ` Muchun Song
2025-04-18 4:27 ` Fan Ni
2025-04-17 16:11 ` [PATCH 1/3] mm/hugetlb: Refactor unmap_ref_private() " Sidhartha Kumar
2025-04-18 2:51 ` Muchun Song
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aAEteJh4Gb8R7gPm@debian \
--to=nifan.cxl@gmail.com \
--cc=a.manzanares@samsung.com \
--cc=akpm@linux-foundation.org \
--cc=dave@stgolabs.net \
--cc=david@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mcgrof@kernel.org \
--cc=muchun.song@linux.dev \
--cc=sidhartha.kumar@oracle.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox