Re: [PATCH net-next v2 0/4] add frag page support in page pool

Re: [PATCH net-next v2 0/4] add frag page support in page pool

[Jesper Dangaard Brouer]

On 10/08/2021 16.01, Jakub Kicinski wrote:
> On Fri, 6 Aug 2021 10:46:18 +0800 Yunsheng Lin wrote:
>> enable skb's page frag recycling based on page pool in
>> hns3 drvier.
> 
> Applied, thanks!

I had hoped to see more acks / reviewed-by before this got applied.
E.g. from MM-people as this patchset changes struct page and page_pool 
(that I'm marked as maintainer of).  And I would have appreciated an 
reviewed-by credit to/from Alexander as he did a lot of work in the RFC 
patchset for the split-page tricks.

p.s. I just returned from vacation today, and have not had time to 
review, sorry.

--Jesper

(relevant struct page changes for MM-people to review)

diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 52bbd2b..7f8ee09 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -103,11 +103,19 @@ struct page {
  			unsigned long pp_magic;
  			struct page_pool *pp;
  			unsigned long _pp_mapping_pad;
-			/**
-			 * @dma_addr: might require a 64-bit value on
-			 * 32-bit architectures.
-			 */
-			unsigned long dma_addr[2];
+			unsigned long dma_addr;
+			union {
+				/**
+				 * dma_addr_upper: might require a 64-bit
+				 * value on 32-bit architectures.
+				 */
+				unsigned long dma_addr_upper;
+				/**
+				 * For frag page support, not supported in
+				 * 32-bit architectures with 64-bit DMA.
+				 */
+				atomic_long_t pp_frag_count;
+			};
  		};
  		struct {	/* slab, slob and slub */

Re: [PATCH net-next v2 0/4] add frag page support in page pool

[Jakub Kicinski]

On Tue, 10 Aug 2021 16:23:52 +0200 Jesper Dangaard Brouer wrote:
> On 10/08/2021 16.01, Jakub Kicinski wrote:
> > On Fri, 6 Aug 2021 10:46:18 +0800 Yunsheng Lin wrote:  
> >> enable skb's page frag recycling based on page pool in
> >> hns3 drvier.  
> > 
> > Applied, thanks!  
> 
> I had hoped to see more acks / reviewed-by before this got applied.
> E.g. from MM-people as this patchset changes struct page and page_pool 
> (that I'm marked as maintainer of). 

Sorry, it was on the list for days and there were 7 or so prior
versions, I thought it was ripe. If possible, a note that review 
will come would be useful.

> And I would have appreciated an reviewed-by credit to/from Alexander
> as he did a lot of work in the RFC patchset for the split-page tricks.

I asked him off-list, he said something I interpreted as "code is okay,
but the review tag is not coming".

Re: [PATCH net-next v2 0/4] add frag page support in page pool

[Alexander Duyck]

On Tue, Aug 10, 2021 at 7:43 AM Jakub Kicinski <kuba@kernel.org> wrote:
>
> On Tue, 10 Aug 2021 16:23:52 +0200 Jesper Dangaard Brouer wrote:
> > On 10/08/2021 16.01, Jakub Kicinski wrote:
> > > On Fri, 6 Aug 2021 10:46:18 +0800 Yunsheng Lin wrote:
> > >> enable skb's page frag recycling based on page pool in
> > >> hns3 drvier.
> > >
> > > Applied, thanks!
> >
> > I had hoped to see more acks / reviewed-by before this got applied.
> > E.g. from MM-people as this patchset changes struct page and page_pool
> > (that I'm marked as maintainer of).
>
> Sorry, it was on the list for days and there were 7 or so prior
> versions, I thought it was ripe. If possible, a note that review
> will come would be useful.
>
> > And I would have appreciated an reviewed-by credit to/from Alexander
> > as he did a lot of work in the RFC patchset for the split-page tricks.
>
> I asked him off-list, he said something I interpreted as "code is okay,
> but the review tag is not coming".

Yeah, I ran out of feedback a revision or two ago and just haven't had
a chance to go through and add my reviewed by. If you want feel free
to add my reviewed by for the set.

Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

Re: [Linuxarm] Re: [PATCH net-next v2 0/4] add frag page support in page pool

[Yunsheng Lin]

On 2021/8/10 23:09, Alexander Duyck wrote:
> On Tue, Aug 10, 2021 at 7:43 AM Jakub Kicinski <kuba@kernel.org> wrote:
>>
>> On Tue, 10 Aug 2021 16:23:52 +0200 Jesper Dangaard Brouer wrote:
>>> On 10/08/2021 16.01, Jakub Kicinski wrote:
>>>> On Fri, 6 Aug 2021 10:46:18 +0800 Yunsheng Lin wrote:
>>>>> enable skb's page frag recycling based on page pool in
>>>>> hns3 drvier.
>>>>
>>>> Applied, thanks!
>>>
>>> I had hoped to see more acks / reviewed-by before this got applied.
>>> E.g. from MM-people as this patchset changes struct page and page_pool
>>> (that I'm marked as maintainer of).
>>
>> Sorry, it was on the list for days and there were 7 or so prior
>> versions, I thought it was ripe. If possible, a note that review
>> will come would be useful.
>>
>>> And I would have appreciated an reviewed-by credit to/from Alexander
>>> as he did a lot of work in the RFC patchset for the split-page tricks.

Yeah, the credit goes to Ilias, Matteo, Matthew too, the patchset from them
paves the path for supporting the skb frag page recycling.

>>
>> I asked him off-list, he said something I interpreted as "code is okay,
>> but the review tag is not coming".
> 
> Yeah, I ran out of feedback a revision or two ago and just haven't had
> a chance to go through and add my reviewed by. If you want feel free
> to add my reviewed by for the set.
> 
> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>

Yeah, thanks for the time and patient for reviewing this patchset.

By the way, I am still trying to implement the tx recycling mentioned
in the other thread, which seems more controversial than rx recycling
as tx recycling may touch the tcp/ip and socket layer. So it would be
good have your opinion about that idea or implemention too:)

> _______________________________________________
> Linuxarm mailing list -- linuxarm@openeuler.org
> To unsubscribe send an email to linuxarm-leave@openeuler.org
> 

Re: [PATCH net-next v2 2/4] page_pool: add interface to manipulate frag count in page pool

[Jesper Dangaard Brouer]

On 06/08/2021 04.46, Yunsheng Lin wrote:
> For 32 bit systems with 64 bit dma, dma_addr[1] is used to
> store the upper 32 bit dma addr, those system should be rare
> those days.
> 
> For normal system, the dma_addr[1] in 'struct page' is not
> used, so we can reuse dma_addr[1] for storing frag count,
> which means how many frags this page might be splited to.
> 
> In order to simplify the page frag support in the page pool,
> the PAGE_POOL_DMA_USE_PP_FRAG_COUNT macro is added to indicate
> the 32 bit systems with 64 bit dma, and the page frag support
> in page pool is disabled for such system.
> 
> The newly added page_pool_set_frag_count() is called to reserve
> the maximum frag count before any page frag is passed to the
> user. The page_pool_atomic_sub_frag_count_return() is called
> when user is done with the page frag.
> 
> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
> ---
>   include/linux/mm_types.h | 18 +++++++++++++-----
>   include/net/page_pool.h  | 46 +++++++++++++++++++++++++++++++++++++++-------
>   net/core/page_pool.c     |  4 ++++
>   3 files changed, 56 insertions(+), 12 deletions(-)
> 
> diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
> index 52bbd2b..7f8ee09 100644
> --- a/include/linux/mm_types.h
> +++ b/include/linux/mm_types.h
> @@ -103,11 +103,19 @@ struct page {
>   			unsigned long pp_magic;
>   			struct page_pool *pp;
>   			unsigned long _pp_mapping_pad;
> -			/**
> -			 * @dma_addr: might require a 64-bit value on
> -			 * 32-bit architectures.
> -			 */
> -			unsigned long dma_addr[2];
> +			unsigned long dma_addr;
> +			union {
> +				/**
> +				 * dma_addr_upper: might require a 64-bit
> +				 * value on 32-bit architectures.
> +				 */
> +				unsigned long dma_addr_upper;
> +				/**
> +				 * For frag page support, not supported in
> +				 * 32-bit architectures with 64-bit DMA.
> +				 */
> +				atomic_long_t pp_frag_count;
> +			};
>   		};
>   		struct {	/* slab, slob and slub */
>   			union {
> diff --git a/include/net/page_pool.h b/include/net/page_pool.h
> index 8d7744d..42e6997 100644
> --- a/include/net/page_pool.h
> +++ b/include/net/page_pool.h
> @@ -45,7 +45,10 @@
>   					* Please note DMA-sync-for-CPU is still
>   					* device driver responsibility
>   					*/
> -#define PP_FLAG_ALL		(PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV)
> +#define PP_FLAG_PAGE_FRAG	BIT(2) /* for page frag feature */
> +#define PP_FLAG_ALL		(PP_FLAG_DMA_MAP |\
> +				 PP_FLAG_DMA_SYNC_DEV |\
> +				 PP_FLAG_PAGE_FRAG)
>   
>   /*
>    * Fast allocation side cache array/stack
> @@ -198,19 +201,48 @@ static inline void page_pool_recycle_direct(struct page_pool *pool,
>   	page_pool_put_full_page(pool, page, true);
>   }
>   
> +#define PAGE_POOL_DMA_USE_PP_FRAG_COUNT	\
> +		(sizeof(dma_addr_t) > sizeof(unsigned long))
> +
>   static inline dma_addr_t page_pool_get_dma_addr(struct page *page)
>   {
> -	dma_addr_t ret = page->dma_addr[0];
> -	if (sizeof(dma_addr_t) > sizeof(unsigned long))
> -		ret |= (dma_addr_t)page->dma_addr[1] << 16 << 16;
> +	dma_addr_t ret = page->dma_addr;
> +
> +	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
> +		ret |= (dma_addr_t)page->dma_addr_upper << 16 << 16;

I find the macro name confusing.

I think it would be easier to read the code, if it was called:
  PAGE_POOL_DMA_CANNOT_USE_PP_FRAG_COUNT

> +
>   	return ret;
>   }
>   
>   static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
>   {
> -	page->dma_addr[0] = addr;
> -	if (sizeof(dma_addr_t) > sizeof(unsigned long))
> -		page->dma_addr[1] = upper_32_bits(addr);
> +	page->dma_addr = addr;
> +	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
> +		page->dma_addr_upper = upper_32_bits(addr);
> +}
> +
> +static inline void page_pool_set_frag_count(struct page *page, long nr)
> +{
> +	atomic_long_set(&page->pp_frag_count, nr);
> +}
> +
> +static inline long page_pool_atomic_sub_frag_count_return(struct page *page,
> +							  long nr)
> +{
> +	long ret;
> +
> +	/* As suggested by Alexander, atomic_long_read() may cover up the
> +	 * reference count errors, so avoid calling atomic_long_read() in
> +	 * the cases of freeing or draining the page_frags, where we would
> +	 * not expect it to match or that are slowpath anyway.
> +	 */
> +	if (__builtin_constant_p(nr) &&
> +	    atomic_long_read(&page->pp_frag_count) == nr)
> +		return 0;
> +
> +	ret = atomic_long_sub_return(nr, &page->pp_frag_count);
> +	WARN_ON(ret < 0);
> +	return ret;
>   }
>   
>   static inline bool is_page_pool_compiled_in(void)
> diff --git a/net/core/page_pool.c b/net/core/page_pool.c
> index 78838c6..68fab94 100644
> --- a/net/core/page_pool.c
> +++ b/net/core/page_pool.c
> @@ -67,6 +67,10 @@ static int page_pool_init(struct page_pool *pool,
>   		 */
>   	}
>   
> +	if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT &&
> +	    pool->p.flags & PP_FLAG_PAGE_FRAG)
> +		return -EINVAL;

I read this as: if the page_pool use pp_frag_count and have flag set, 
then it is invalid/no-allowed, which seems wrong.

I find this code more intuitive to read:

  +	if (PAGE_POOL_DMA_CANNOT_USE_PP_FRAG_COUNT &&
  +	    pool->p.flags & PP_FLAG_PAGE_FRAG)
  +		return -EINVAL;

--Jesper

Re: [PATCH net-next v2 2/4] page_pool: add interface to manipulate frag count in page pool

[Yunsheng Lin]

On 2021/8/10 22:58, Jesper Dangaard Brouer wrote:
> 
> 
> On 06/08/2021 04.46, Yunsheng Lin wrote:
>> For 32 bit systems with 64 bit dma, dma_addr[1] is used to
>> store the upper 32 bit dma addr, those system should be rare
>> those days.
>>
>> For normal system, the dma_addr[1] in 'struct page' is not
>> used, so we can reuse dma_addr[1] for storing frag count,
>> which means how many frags this page might be splited to.
>>
>> In order to simplify the page frag support in the page pool,
>> the PAGE_POOL_DMA_USE_PP_FRAG_COUNT macro is added to indicate
>> the 32 bit systems with 64 bit dma, and the page frag support
>> in page pool is disabled for such system.
>>
>> The newly added page_pool_set_frag_count() is called to reserve
>> the maximum frag count before any page frag is passed to the
>> user. The page_pool_atomic_sub_frag_count_return() is called
>> when user is done with the page frag.
>>
>> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
>> ---
>>   include/linux/mm_types.h | 18 +++++++++++++-----
>>   include/net/page_pool.h  | 46 +++++++++++++++++++++++++++++++++++++++-------
>>   net/core/page_pool.c     |  4 ++++
>>   3 files changed, 56 insertions(+), 12 deletions(-)
>>
>> diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
>> index 52bbd2b..7f8ee09 100644
>> --- a/include/linux/mm_types.h
>> +++ b/include/linux/mm_types.h
>> @@ -103,11 +103,19 @@ struct page {
>>               unsigned long pp_magic;
>>               struct page_pool *pp;
>>               unsigned long _pp_mapping_pad;
>> -            /**
>> -             * @dma_addr: might require a 64-bit value on
>> -             * 32-bit architectures.
>> -             */
>> -            unsigned long dma_addr[2];
>> +            unsigned long dma_addr;
>> +            union {
>> +                /**
>> +                 * dma_addr_upper: might require a 64-bit
>> +                 * value on 32-bit architectures.
>> +                 */
>> +                unsigned long dma_addr_upper;
>> +                /**
>> +                 * For frag page support, not supported in
>> +                 * 32-bit architectures with 64-bit DMA.
>> +                 */
>> +                atomic_long_t pp_frag_count;
>> +            };
>>           };
>>           struct {    /* slab, slob and slub */
>>               union {
>> diff --git a/include/net/page_pool.h b/include/net/page_pool.h
>> index 8d7744d..42e6997 100644
>> --- a/include/net/page_pool.h
>> +++ b/include/net/page_pool.h
>> @@ -45,7 +45,10 @@
>>                       * Please note DMA-sync-for-CPU is still
>>                       * device driver responsibility
>>                       */
>> -#define PP_FLAG_ALL        (PP_FLAG_DMA_MAP | PP_FLAG_DMA_SYNC_DEV)
>> +#define PP_FLAG_PAGE_FRAG    BIT(2) /* for page frag feature */
>> +#define PP_FLAG_ALL        (PP_FLAG_DMA_MAP |\
>> +                 PP_FLAG_DMA_SYNC_DEV |\
>> +                 PP_FLAG_PAGE_FRAG)
>>     /*
>>    * Fast allocation side cache array/stack
>> @@ -198,19 +201,48 @@ static inline void page_pool_recycle_direct(struct page_pool *pool,
>>       page_pool_put_full_page(pool, page, true);
>>   }
>>   +#define PAGE_POOL_DMA_USE_PP_FRAG_COUNT    \
>> +        (sizeof(dma_addr_t) > sizeof(unsigned long))
>> +
>>   static inline dma_addr_t page_pool_get_dma_addr(struct page *page)
>>   {
>> -    dma_addr_t ret = page->dma_addr[0];
>> -    if (sizeof(dma_addr_t) > sizeof(unsigned long))
>> -        ret |= (dma_addr_t)page->dma_addr[1] << 16 << 16;
>> +    dma_addr_t ret = page->dma_addr;
>> +
>> +    if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
>> +        ret |= (dma_addr_t)page->dma_addr_upper << 16 << 16;
> 
> I find the macro name confusing.
> 
> I think it would be easier to read the code, if it was called:
>  PAGE_POOL_DMA_CANNOT_USE_PP_FRAG_COUNT

Actually, there is a *DMA* in tha above macro, which means DMA
addr uses the PP_FRAG_COUNT field.
Perhaps PAGE_POOL_DMA_ADDR_UPPER_USE_PP_FRAG_COUNT is more obvious
here?

> 
>> +
>>       return ret;
>>   }
>>     static inline void page_pool_set_dma_addr(struct page *page, dma_addr_t addr)
>>   {
>> -    page->dma_addr[0] = addr;
>> -    if (sizeof(dma_addr_t) > sizeof(unsigned long))
>> -        page->dma_addr[1] = upper_32_bits(addr);
>> +    page->dma_addr = addr;
>> +    if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT)
>> +        page->dma_addr_upper = upper_32_bits(addr);
>> +}
>> +
>> +static inline void page_pool_set_frag_count(struct page *page, long nr)
>> +{
>> +    atomic_long_set(&page->pp_frag_count, nr);
>> +}
>> +
>> +static inline long page_pool_atomic_sub_frag_count_return(struct page *page,
>> +                              long nr)
>> +{
>> +    long ret;
>> +
>> +    /* As suggested by Alexander, atomic_long_read() may cover up the
>> +     * reference count errors, so avoid calling atomic_long_read() in
>> +     * the cases of freeing or draining the page_frags, where we would
>> +     * not expect it to match or that are slowpath anyway.
>> +     */
>> +    if (__builtin_constant_p(nr) &&
>> +        atomic_long_read(&page->pp_frag_count) == nr)
>> +        return 0;
>> +
>> +    ret = atomic_long_sub_return(nr, &page->pp_frag_count);
>> +    WARN_ON(ret < 0);
>> +    return ret;
>>   }
>>     static inline bool is_page_pool_compiled_in(void)
>> diff --git a/net/core/page_pool.c b/net/core/page_pool.c
>> index 78838c6..68fab94 100644
>> --- a/net/core/page_pool.c
>> +++ b/net/core/page_pool.c
>> @@ -67,6 +67,10 @@ static int page_pool_init(struct page_pool *pool,
>>            */
>>       }
>>   +    if (PAGE_POOL_DMA_USE_PP_FRAG_COUNT &&
>> +        pool->p.flags & PP_FLAG_PAGE_FRAG)
>> +        return -EINVAL;
> 
> I read this as: if the page_pool use pp_frag_count and have flag set, then it is invalid/no-allowed, which seems wrong.
> 
> I find this code more intuitive to read:
> 
>  +    if (PAGE_POOL_DMA_CANNOT_USE_PP_FRAG_COUNT &&
>  +        pool->p.flags & PP_FLAG_PAGE_FRAG)
>  +        return -EINVAL;
> 
> --Jesper
> 
> .
>