From: Chengming Zhou <chengming.zhou@linux.dev>
To: Yosry Ahmed <yosryahmed@google.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>,
Nhat Pham <nphamcs@gmail.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 5/5] mm: zswap: remove same_filled module params
Date: Wed, 10 Apr 2024 10:31:04 +0800 [thread overview]
Message-ID: <a340fb1a-7225-42d6-8a66-c6ac63bccaaa@linux.dev> (raw)
In-Reply-To: <20240405053510.1948982-6-yosryahmed@google.com>
On 2024/4/5 13:35, Yosry Ahmed wrote:
> These knobs offer more fine-grained control to userspace than needed and
> directly expose/influence kernel implementation; remove them.
>
> For disabling same_filled handling, there is no logical reason to refuse
> storing same-filled pages more efficiently and opt for compression.
> Scanning pages for patterns may be an argument, but the page contents
> will be read into the CPU cache anyway during compression. Also,
> removing the same_filled handling code does not move the needle
> significantly in terms of performance anyway [1].
>
> For disabling non_same_filled handling, it was added when the compressed
> pages in zswap were not being properly charged to memcgs, as workloads
> could escape the accounting with compression [2]. This is no longer the
> case after commit f4840ccfca25 ("zswap: memcg accounting"), and using
> zswap without compression does not make much sense.
>
> [1]https://lore.kernel.org/lkml/CAJD7tkaySFP2hBQw4pnZHJJwe3bMdjJ1t9VC2VJd=khn1_TXvA@mail.gmail.com/
> [2]https://lore.kernel.org/lkml/19d5cdee-2868-41bd-83d5-6da75d72e940@maciej.szmigiero.name/
>
> Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
> Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Nice cleanup!
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Thanks.
> ---
> mm/zswap.c | 19 -------------------
> 1 file changed, 19 deletions(-)
>
> diff --git a/mm/zswap.c b/mm/zswap.c
> index 13869d18c13bd..b738435215218 100644
> --- a/mm/zswap.c
> +++ b/mm/zswap.c
> @@ -140,19 +140,6 @@ static const struct kernel_param_ops zswap_accept_thr_param_ops = {
> module_param_cb(accept_threshold_percent, &zswap_accept_thr_param_ops,
> &zswap_accept_thr_percent, 0644);
>
> -/*
> - * Enable/disable handling same-value filled pages (enabled by default).
> - * If disabled every page is considered non-same-value filled.
> - */
> -static bool zswap_same_filled_pages_enabled = true;
> -module_param_named(same_filled_pages_enabled, zswap_same_filled_pages_enabled,
> - bool, 0644);
> -
> -/* Enable/disable handling non-same-value filled pages (enabled by default) */
> -static bool zswap_non_same_filled_pages_enabled = true;
> -module_param_named(non_same_filled_pages_enabled, zswap_non_same_filled_pages_enabled,
> - bool, 0644);
> -
> /* Number of zpools in zswap_pool (empirically determined for scalability) */
> #define ZSWAP_NR_ZPOOLS 32
>
> @@ -1421,9 +1408,6 @@ static bool zswap_is_folio_same_filled(struct folio *folio, unsigned long *value
> unsigned int pos, last_pos = PAGE_SIZE / sizeof(*page) - 1;
> bool ret = false;
>
> - if (!zswap_same_filled_pages_enabled)
> - return false;
> -
> page = kmap_local_folio(folio, 0);
> val = page[0];
>
> @@ -1512,9 +1496,6 @@ bool zswap_store(struct folio *folio)
> goto store_entry;
> }
>
> - if (!zswap_non_same_filled_pages_enabled)
> - goto freepage;
> -
> /* if entry is successfully added, it keeps the reference */
> entry->pool = zswap_pool_current_get();
> if (!entry->pool)
prev parent reply other threads:[~2024-04-10 2:31 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-05 5:35 [PATCH v2 0/5] zswap same-filled and limit checking cleanups Yosry Ahmed
2024-04-05 5:35 ` [PATCH v2 1/5] mm: zswap: always shrink in zswap_store() if zswap_pool_reached_full Yosry Ahmed
2024-04-05 5:35 ` [PATCH v2 2/5] mm: zswap: calculate limits only when updated Yosry Ahmed
2024-04-05 15:26 ` Johannes Weiner
2024-04-05 18:43 ` Yosry Ahmed
2024-04-08 7:54 ` David Hildenbrand
2024-04-08 8:07 ` Yosry Ahmed
2024-04-09 19:32 ` David Hildenbrand
2024-04-10 0:52 ` Yosry Ahmed
2024-04-12 19:48 ` David Hildenbrand
2024-04-13 1:05 ` Yosry Ahmed
2024-04-15 15:10 ` David Hildenbrand
2024-04-15 18:30 ` Yosry Ahmed
2024-04-15 19:15 ` David Hildenbrand
2024-04-15 19:17 ` Yosry Ahmed
2024-04-05 20:23 ` kernel test robot
2024-04-05 20:29 ` Yosry Ahmed
2024-04-05 5:35 ` [PATCH v2 3/5] mm: zswap: refactor limit checking from zswap_store() Yosry Ahmed
2024-04-05 19:57 ` Nhat Pham
2024-04-10 2:30 ` Chengming Zhou
2024-04-05 5:35 ` [PATCH v2 4/5] mm: zswap: move more same-filled pages checks outside of zswap_store() Yosry Ahmed
2024-04-05 5:35 ` [PATCH v2 5/5] mm: zswap: remove same_filled module params Yosry Ahmed
2024-04-05 19:58 ` Nhat Pham
2024-04-10 2:31 ` Chengming Zhou [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a340fb1a-7225-42d6-8a66-c6ac63bccaaa@linux.dev \
--to=chengming.zhou@linux.dev \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=yosryahmed@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox