From: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
To: Suren Baghdasaryan <surenb@google.com>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>,
Andrew Morton <akpm@linux-foundation.org>,
Vlastimil Babka <vbabka@suse.cz>,
Shakeel Butt <shakeel.butt@linux.dev>,
David Hildenbrand <david@kernel.org>,
Rik van Riel <riel@surriel.com>, Harry Yoo <harry.yoo@oracle.com>,
Jann Horn <jannh@google.com>, Mike Rapoport <rppt@kernel.org>,
Michal Hocko <mhocko@suse.com>, Pedro Falcato <pfalcato@suse.de>,
Chris Li <chriscli@google.com>,
Barry Song <v-songbaohua@oppo.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/8] mm/rmap: skip unfaulted VMAs on anon_vma clone, unlink
Date: Tue, 6 Jan 2026 13:17:12 +0000 [thread overview]
Message-ID: <a1d78ca9-88cf-4b3f-8999-6307c39db0d9@lucifer.local> (raw)
In-Reply-To: <CAJuCfpHq0G=kLBD=_0cgujT0Qu6yQ-EDB1uyXQJPGWmpSQGYGQ@mail.gmail.com>
On Mon, Dec 29, 2025 at 01:41:10PM -0800, Suren Baghdasaryan wrote:
> On Fri, Dec 19, 2025 at 10:28 AM Liam R. Howlett
> <Liam.Howlett@oracle.com> wrote:
> >
> > * Lorenzo Stoakes <lorenzo.stoakes@oracle.com> [251217 07:27]:
> > > For both anon_vma_clone() and unlink_anon_vmas(), if the source VMA or the
> > > VMA to be linked are unfaulted (e.g. !vma->anon_vma), then the functions do
> > > nothing. Simply exit early in these cases.
> > >
> > > In the unlink_anon_vmas() case we can also remove a conditional that checks
> > > whether vma->anon_vma is set.
> > >
> > > Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
> > > ---
> > > mm/rmap.c | 20 +++++++++++---------
> > > 1 file changed, 11 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/mm/rmap.c b/mm/rmap.c
> > > index 0e34c0a69fbc..9332d1cbc643 100644
> > > --- a/mm/rmap.c
> > > +++ b/mm/rmap.c
> > > @@ -309,6 +309,9 @@ int anon_vma_clone(struct vm_area_struct *dst, struct vm_area_struct *src)
> > > struct anon_vma_chain *avc, *pavc;
> > > struct anon_vma *root = NULL;
> > >
> > > + if (!src->anon_vma)
> > > + return 0;
> > > +
> > > check_anon_vma_clone(dst, src);
>
> check_anon_vma_clone() is used only here and contains a couple of
> warnings with "!src->anon_vma && ..." conditions, which now will never
> be triggered even if the second part of those conditions was true.
> This seems like a regression (you are not checking conditions you were
> checking before this change). To avoid that, you can place this early
> exit after the call to check_anon_vma_clone(dst, src).
Yup am aware. Was because later on we do stuff that assumes src.
I guess I can move it and then change the later commit.
>
> > >
> > > list_for_each_entry_reverse(pavc, &src->anon_vma_chain, same_vma) {
> > > @@ -441,7 +444,8 @@ void unlink_anon_vmas(struct vm_area_struct *vma)
> > > mmap_assert_locked(vma->vm_mm);
> > >
> > > /* Unfaulted is a no-op. */
> > > - VM_WARN_ON_ONCE(!vma->anon_vma && !list_empty(&vma->anon_vma_chain));
> > > + if (!vma->anon_vma)
> > > + return;
> >
> > I guess it doesn't matter because you just added the !list_empty()
> > check, but did you mean to drop that part?
> >
> > >
> > > /*
> > > * Unlink each anon_vma chained to the VMA. This list is ordered
> > > @@ -465,15 +469,13 @@ void unlink_anon_vmas(struct vm_area_struct *vma)
> > > list_del(&avc->same_vma);
> > > anon_vma_chain_free(avc);
> > > }
> > > - if (vma->anon_vma) {
> > > - vma->anon_vma->num_active_vmas--;
> > >
> > > - /*
> > > - * vma would still be needed after unlink, and anon_vma will be prepared
> > > - * when handle fault.
> > > - */
> > > - vma->anon_vma = NULL;
> > > - }
> > > + vma->anon_vma->num_active_vmas--;
> > > + /*
> > > + * vma would still be needed after unlink, and anon_vma will be prepared
> > > + * when handle fault.
> > > + */
> > > + vma->anon_vma = NULL;
> > > unlock_anon_vma_root(root);
> > >
> > > /*
> > > --
> > > 2.52.0
> > >
next prev parent reply other threads:[~2026-01-06 13:17 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-17 12:27 [PATCH 0/8] mm: clean up anon_vma implementation Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 1/8] mm/rmap: improve anon_vma_clone(), unlink_anon_vmas() comments, add asserts Lorenzo Stoakes
2025-12-19 18:22 ` Liam R. Howlett
2025-12-29 21:18 ` Suren Baghdasaryan
2025-12-30 21:21 ` Suren Baghdasaryan
2026-01-06 12:54 ` Lorenzo Stoakes
2026-01-06 13:01 ` Lorenzo Stoakes
2026-01-06 13:04 ` Lorenzo Stoakes
2026-01-06 13:34 ` Lorenzo Stoakes
2026-01-06 18:52 ` Suren Baghdasaryan
2026-01-06 13:51 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 2/8] mm/rmap: skip unfaulted VMAs on anon_vma clone, unlink Lorenzo Stoakes
2025-12-19 18:28 ` Liam R. Howlett
2025-12-29 21:41 ` Suren Baghdasaryan
2026-01-06 13:17 ` Lorenzo Stoakes [this message]
2026-01-06 13:14 ` Lorenzo Stoakes
2026-01-06 13:42 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 3/8] mm/rmap: remove unnecessary root lock dance in anon_vma clone, unmap Lorenzo Stoakes
2025-12-29 22:17 ` Suren Baghdasaryan
2026-01-06 13:58 ` Lorenzo Stoakes
2026-01-06 20:58 ` Suren Baghdasaryan
2026-01-08 17:46 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 4/8] mm/rmap: remove anon_vma_merge() function Lorenzo Stoakes
2025-12-30 19:35 ` Suren Baghdasaryan
2026-01-06 14:00 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 5/8] mm/rmap: make anon_vma functions internal Lorenzo Stoakes
2025-12-30 19:38 ` Suren Baghdasaryan
2026-01-06 14:03 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 6/8] mm/mmap_lock: add vma_is_attached() helper Lorenzo Stoakes
2025-12-30 19:50 ` Suren Baghdasaryan
2026-01-06 14:06 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 7/8] mm/rmap: allocate anon_vma_chain objects unlocked when possible Lorenzo Stoakes
2025-12-30 21:35 ` Suren Baghdasaryan
2026-01-06 14:17 ` Lorenzo Stoakes
2026-01-06 21:20 ` Suren Baghdasaryan
2026-01-08 17:26 ` Lorenzo Stoakes
2025-12-17 12:27 ` [PATCH 8/8] mm/rmap: separate out fork-only logic on anon_vma_clone() Lorenzo Stoakes
2025-12-30 22:02 ` Suren Baghdasaryan
2026-01-06 14:43 ` Lorenzo Stoakes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1d78ca9-88cf-4b3f-8999-6307c39db0d9@lucifer.local \
--to=lorenzo.stoakes@oracle.com \
--cc=Liam.Howlett@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=chriscli@google.com \
--cc=david@kernel.org \
--cc=harry.yoo@oracle.com \
--cc=jannh@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=pfalcato@suse.de \
--cc=riel@surriel.com \
--cc=rppt@kernel.org \
--cc=shakeel.butt@linux.dev \
--cc=surenb@google.com \
--cc=v-songbaohua@oppo.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox