From: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
To: Lance Yang <lance.yang@linux.dev>
Cc: akpm@linux-foundation.org, david@redhat.com, ziy@nvidia.com,
baolin.wang@linux.alibaba.com, Liam.Howlett@oracle.com,
npache@redhat.com, ryan.roberts@arm.com, dev.jain@arm.com,
baohua@kernel.org, ioworker0@gmail.com,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Kairui Song <kasong@tencent.com>
Subject: Re: [PATCH mm-new 2/3] mm: clean up and expose is_guard_pte_marker()
Date: Mon, 15 Sep 2025 14:54:25 +0100 [thread overview]
Message-ID: <a0133269-82dc-4249-bb78-202b44a4a25e@lucifer.local> (raw)
In-Reply-To: <20250914143547.27687-3-lance.yang@linux.dev>
On Sun, Sep 14, 2025 at 10:35:46PM +0800, Lance Yang wrote:
> From: Lance Yang <lance.yang@linux.dev>
>
> is_guard_pte_marker() performs a redundant check because it calls both
> is_pte_marker() and is_guard_swp_entry(), both of which internally check
> for a PTE marker.
>
> is_guard_pte_marker()
> |- is_pte_marker()
> | `- is_pte_marker_entry() // First check
> `- is_guard_swp_entry()
> `- is_pte_marker_entry() // Second, redundant check
>
I mean, it expands to:
is_swap_pte(pte) && is_pte_marker_entry(pte_to_swp_entry(pte)) &&
is_pte_marker_entry(pte_to_swp_entry(pte))
So I don't think it's really unreasonable to expect compiler magic here...
But you're right that I should have just used is_swap_pte() really, it's a bit
silly not to, so this is fine :)
> While a modern compiler could likely optimize this away, let's have clean
> code and not rely on it ;)
Please don't put smileys in commit messages :) as cute as they are, this is
going on the permanent kernel record and while we all love them, it's
probably not the best place to put them :P
>
> Also, make it available for hugepage collapsing code.
Nit but put a newline after this.
I think probably if I'm really really nitty I'd say that you should put
this bit first, as it's the primary motivation for the change, and put the
refactoring stuff after.
> Cc: Kairui Song <kasong@tencent.com>
> Signed-off-by: Lance Yang <lance.yang@linux.dev>
This seems fine to me, so:
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
> ---
> include/linux/swapops.h | 6 ++++++
> mm/madvise.c | 6 ------
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/include/linux/swapops.h b/include/linux/swapops.h
> index 59c5889a4d54..7f5684fa043b 100644
> --- a/include/linux/swapops.h
> +++ b/include/linux/swapops.h
> @@ -469,6 +469,12 @@ static inline int is_guard_swp_entry(swp_entry_t entry)
> (pte_marker_get(entry) & PTE_MARKER_GUARD);
> }
>
> +static inline bool is_guard_pte_marker(pte_t ptent)
> +{
> + return is_swap_pte(ptent) &&
> + is_guard_swp_entry(pte_to_swp_entry(ptent));
> +}
> +
> /*
> * This is a special version to check pte_none() just to cover the case when
> * the pte is a pte marker. It existed because in many cases the pte marker
> diff --git a/mm/madvise.c b/mm/madvise.c
> index 35ed4ab0d7c5..bd46e6788fac 100644
> --- a/mm/madvise.c
> +++ b/mm/madvise.c
> @@ -1069,12 +1069,6 @@ static bool is_valid_guard_vma(struct vm_area_struct *vma, bool allow_locked)
> return !(vma->vm_flags & disallowed);
> }
>
> -static bool is_guard_pte_marker(pte_t ptent)
> -{
> - return is_pte_marker(ptent) &&
> - is_guard_swp_entry(pte_to_swp_entry(ptent));
> -}
> -
> static int guard_install_pud_entry(pud_t *pud, unsigned long addr,
> unsigned long next, struct mm_walk *walk)
> {
> --
> 2.49.0
>
next prev parent reply other threads:[~2025-09-15 13:54 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-14 14:35 [PATCH mm-new 0/3] mm/khugepaged: optimize collapse candidate detection Lance Yang
2025-09-14 14:35 ` [PATCH mm-new 1/3] mm/khugepaged: skip unsuitable VMAs earlier in khugepaged_scan_mm_slot() Lance Yang
2025-09-14 16:16 ` Dev Jain
2025-09-15 3:02 ` Lance Yang
2025-09-16 5:32 ` Hugh Dickins
2025-09-16 6:21 ` Lance Yang
2025-09-16 6:42 ` Hugh Dickins
2025-09-16 7:05 ` Lance Yang
2025-09-16 9:29 ` Kiryl Shutsemau
2025-09-16 9:39 ` Lorenzo Stoakes
2025-09-16 9:48 ` Kiryl Shutsemau
2025-09-16 9:58 ` Lorenzo Stoakes
2025-09-16 10:00 ` Lance Yang
2025-09-16 9:59 ` Lance Yang
2025-09-14 14:35 ` [PATCH mm-new 2/3] mm: clean up and expose is_guard_pte_marker() Lance Yang
2025-09-14 16:38 ` Dev Jain
2025-09-15 4:24 ` Lance Yang
2025-09-15 13:54 ` Lorenzo Stoakes [this message]
2025-09-15 14:26 ` Lance Yang
2025-09-17 10:32 ` David Hildenbrand
2025-09-14 14:35 ` [PATCH mm-new 3/3] mm/khugepaged: abort collapse scan on guard PTEs Lance Yang
2025-09-14 17:03 ` Dev Jain
2025-09-15 3:36 ` Lance Yang
2025-09-15 14:08 ` Lorenzo Stoakes
2025-09-15 14:42 ` Lance Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a0133269-82dc-4249-bb78-202b44a4a25e@lucifer.local \
--to=lorenzo.stoakes@oracle.com \
--cc=Liam.Howlett@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=david@redhat.com \
--cc=dev.jain@arm.com \
--cc=ioworker0@gmail.com \
--cc=kasong@tencent.com \
--cc=lance.yang@linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=npache@redhat.com \
--cc=ryan.roberts@arm.com \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox