From: Yan Zhao <yan.y.zhao@intel.com>
To: Sean Christopherson <seanjc@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>, <linux-mm@kvack.org>,
<linux-kernel@vger.kernel.org>, <kvm@vger.kernel.org>,
<pbonzini@redhat.com>, <mike.kravetz@oracle.com>,
<apopple@nvidia.com>, <rppt@kernel.org>,
<akpm@linux-foundation.org>, <kevin.tian@intel.com>
Subject: Re: [RFC PATCH 3/3] KVM: x86/mmu: skip zap maybe-dma-pinned pages for NUMA migration
Date: Wed, 9 Aug 2023 08:11:17 +0800 [thread overview]
Message-ID: <ZNLZpWbnSmNRc/Lw@yzhao56-desk.sh.intel.com> (raw)
In-Reply-To: <ZNLWG++qK1mZcEOq@google.com>
On Tue, Aug 08, 2023 at 04:56:11PM -0700, Sean Christopherson wrote:
> On Tue, Aug 08, 2023, Jason Gunthorpe wrote:
> > On Tue, Aug 08, 2023 at 07:26:07AM -0700, Sean Christopherson wrote:
> > > On Tue, Aug 08, 2023, Jason Gunthorpe wrote:
> > > > On Tue, Aug 08, 2023 at 03:17:02PM +0800, Yan Zhao wrote:
> > > > > @@ -859,6 +860,21 @@ static bool tdp_mmu_zap_leafs(struct kvm *kvm, struct kvm_mmu_page *root,
> > > > > !is_last_spte(iter.old_spte, iter.level))
> > > > > continue;
> > > > >
> > > > > + if (skip_pinned) {
> > > > > + kvm_pfn_t pfn = spte_to_pfn(iter.old_spte);
> > > > > + struct page *page = kvm_pfn_to_refcounted_page(pfn);
> > > > > + struct folio *folio;
> > > > > +
> > > > > + if (!page)
> > > > > + continue;
> > > > > +
> > > > > + folio = page_folio(page);
> > > > > +
> > > > > + if (folio_test_anon(folio) && PageAnonExclusive(&folio->page) &&
> > > > > + folio_maybe_dma_pinned(folio))
> > > > > + continue;
> > > > > + }
> > > > > +
> > > >
> > > > I don't get it..
> > > >
> > > > The last patch made it so that the NUMA balancing code doesn't change
> > > > page_maybe_dma_pinned() pages to PROT_NONE
> > > >
> > > > So why doesn't KVM just check if the current and new SPTE are the same
> > > > and refrain from invalidating if nothing changed?
> > >
> > > Because KVM doesn't have visibility into the current and new PTEs when the zapping
> > > occurs. The contract for invalidate_range_start() requires that KVM drop all
> > > references before returning, and so the zapping occurs before change_pte_range()
> > > or change_huge_pmd() have done antyhing.
> > >
> > > > Duplicating the checks here seems very frail to me.
> > >
> > > Yes, this is approach gets a hard NAK from me. IIUC, folio_maybe_dma_pinned()
> > > can yield different results purely based on refcounts, i.e. KVM could skip pages
> > > that the primary MMU does not, and thus violate the mmu_notifier contract. And
> > > in general, I am steadfastedly against adding any kind of heuristic to KVM's
> > > zapping logic.
> > >
> > > This really needs to be fixed in the primary MMU and not require any direct
> > > involvement from secondary MMUs, e.g. the mmu_notifier invalidation itself needs
> > > to be skipped.
> >
> > This likely has the same issue you just described, we don't know if it
> > can be skipped until we iterate over the PTEs and by then it is too
> > late to invoke the notifier. Maybe some kind of abort and restart
> > scheme could work?
>
> Or maybe treat this as a userspace config problem? Pinning DMA pages in a VM,
> having a fair amount of remote memory, *and* expecting NUMA balancing to do anything
> useful for that VM seems like a userspace problem.
>
> Actually, does NUMA balancing even support this particular scenario? I see this
> in do_numa_page()
>
> /* TODO: handle PTE-mapped THP */
> if (PageCompound(page))
> goto out_map;
hi Sean,
I think compound page is handled in do_huge_pmd_numa_page(), and I do
observed numa migration of those kind of pages.
> and then for PG_anon_exclusive
>
> * ... For now, we only expect it to be
> * set on tail pages for PTE-mapped THP.
> */
> PG_anon_exclusive = PG_mappedtodisk,
>
> which IIUC means zapping these pages to do migrate_on-fault will never succeed.
>
> Can we just tell userspace to mbind() the pinned region to explicitly exclude the
> VMA(s) from NUMA balancing?
For VMs with VFIO mdev mediated devices, the VMAs to be pinned are
dynamic, I think it's hard to mbind() in advance.
Thanks
Yan
next prev parent reply other threads:[~2023-08-09 0:38 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-08 7:13 [RFC PATCH 0/3] Reduce NUMA balance caused TLB-shootdowns in a VM Yan Zhao
2023-08-08 7:14 ` [RFC PATCH 1/3] mm/mmu_notifier: introduce a new mmu notifier flag MMU_NOTIFIER_RANGE_NUMA Yan Zhao
2023-08-08 7:15 ` [RFC PATCH 2/3] mm: don't set PROT_NONE to maybe-dma-pinned pages for NUMA-migrate purpose Yan Zhao
2023-08-08 7:17 ` [RFC PATCH 3/3] KVM: x86/mmu: skip zap maybe-dma-pinned pages for NUMA migration Yan Zhao
2023-08-08 12:32 ` Jason Gunthorpe
2023-08-08 14:26 ` Sean Christopherson
2023-08-08 14:32 ` Jason Gunthorpe
2023-08-08 23:56 ` Sean Christopherson
2023-08-09 0:11 ` Yan Zhao [this message]
2023-08-09 11:59 ` Jason Gunthorpe
2023-08-10 9:08 ` Yan Zhao
2023-08-09 5:06 ` Yan Zhao
2023-08-09 2:58 ` Yan Zhao
2023-08-09 0:29 ` Yan Zhao
2023-08-26 6:39 ` liulongfang
2023-09-04 7:03 ` Yan Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZNLZpWbnSmNRc/Lw@yzhao56-desk.sh.intel.com \
--to=yan.y.zhao@intel.com \
--cc=akpm@linux-foundation.org \
--cc=apopple@nvidia.com \
--cc=jgg@nvidia.com \
--cc=kevin.tian@intel.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mike.kravetz@oracle.com \
--cc=pbonzini@redhat.com \
--cc=rppt@kernel.org \
--cc=seanjc@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox