linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dennis Zhou <dennis@kernel.org>
To: Thomas Gleixner <tglx@linutronix.de>
Cc: LKML <linux-kernel@vger.kernel.org>,
	Peter Zijlstra <peterz@infradead.org>,
	Valentin Schneider <vschneid@redhat.com>,
	Tejun Heo <tj@kernel.org>, Christoph Lameter <cl@linux.com>,
	Dave Chinner <dchinner@redhat.com>,
	Yury Norov <yury.norov@gmail.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Rasmus Villemoes <linux@rasmusvillemoes.dk>,
	Ye Bin <yebin10@huawei.com>,
	linux-mm@kvack.org
Subject: Re: [patch 1/3] lib/percpu_counter: Fix CPU hotplug handling
Date: Fri, 14 Apr 2023 22:20:04 -0700	[thread overview]
Message-ID: <ZDo0BHfm+iEGQyEX@snowbird> (raw)
In-Reply-To: <20230414162841.166896739@linutronix.de>

Hello,

On Fri, Apr 14, 2023 at 06:30:43PM +0200, Thomas Gleixner wrote:
> Commit 8b57b11cca88 ("pcpcntrs: fix dying cpu summation race") tried to
> address a race condition between percpu_counter_sum() and a concurrent CPU
> hotplug operation.
> 
> The race window is between the point where an un-plugged CPU removed itself
> from the online_cpu_mask and the hotplug state callback which folds the per
> CPU counters of the now dead CPU into the global count.
> 
> percpu_counter_sum() used for_each_online_cpu() to accumulate the per CPU
> local counts, so during the race window it missed to account for the not
> yet folded back local count of the offlined CPU.
> 
> The attempt to address this used the admittedly undocumented and
> pointlessly public cpu_dying_mask by changing the loop iterator to take
> both the cpu_online_mask and the cpu_dying_mask into account.
> 
> That works to some extent, but it is incorrect.
> 
> The cpu_dying_mask bits are sticky even after cpu_up()/cpu_down()
> completes. That means that all offlined CPUs are always taken into
> account. In the case of disabling SMT at boottime or runtime this results
> in evaluating _all_ offlined SMT siblings counters forever.  Depending on
> system size, that's a massive amount of cache-lines to be touched forever.
> 
> It might be argued, that the cpu_dying_mask bit could be cleared when
> cpu_down() completes, but that's not possible under all circumstances.
> 
> Especially with partial hotplug the bit must be sticky in order to keep the
> initial user, i.e. the scheduler correct. Partial hotplug which allows
> explicit state transitions also can create a situation where the race
> window gets recreated:
> 
>        cpu_down(target = CPUHP_PERCPU_CNT_DEAD + 1)
> 
> brings a CPU down to one state before the per CPU counter folding
> callback. As this did not reach CPUHP_OFFLINE state the bit would stay set.
> Now the next partial operation:
> 
>        cpu_up(target = CPUHP_PERCPU_CNT_DEAD + 2)
> 
> has to clear the bit and the race window is open again.
> 
> There are two ways to solve this:
> 
>   1) Maintain a local CPU mask in the per CPU counter code which
>      gets the bit set when a CPU comes online and removed in the
>      the CPUHP_PERCPU_CNT_DEAD state after folding.
> 
>      This adds more code and complexity.
> 
>   2) Move the folding hotplug state into the DYING callback section, which
>      runs on the outgoing CPU immediatedly after it cleared its online bit.
> 
>      There is no concurrency vs. percpu_counter_sum() on another CPU
>      because all still online CPUs are waiting in stop_machine() for the
>      outgoing CPU to complete its shutdown. The raw spinlock held around
>      the CPU mask iteration prevents that an online CPU reaches the stop
>      machine thread while iterating, which implicitely prevents the
>      outgoing CPU from clearing its online bit.
> 
>      This is way simpler than #1 and makes the hotplug calls symmetric for
>      the price of a slightly longer wait time in stop_machine(), which is
>      not the end of the world as CPU un-plug is already slow. The overall
>      time for a cpu_down() operation stays exactly the same.
> 
> Implement #2 and plug the race completely.
> 
> percpu_counter_sum() is still inherently racy against a concurrent
> percpu_counter_add_batch() fastpath unless externally serialized.  That's
> completely independent of CPU hotplug though.
> 
> Fixes: 8b57b11cca88 ("pcpcntrs: fix dying cpu summation race")
> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
> Cc: Dennis Zhou <dennis@kernel.org>
> Cc: Tejun Heo <tj@kernel.org>
> Cc: Christoph Lameter <cl@linux.com>
> Cc: Dave Chinner <dchinner@redhat.com>
> Cc: Yury Norov <yury.norov@gmail.com>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
> Cc: Ye Bin <yebin10@huawei.com>
> Cc: linux-mm@kvack.org
> ---
>  include/linux/cpuhotplug.h |    2 -
>  lib/percpu_counter.c       |   57 +++++++++++++++++++--------------------------
>  2 files changed, 26 insertions(+), 33 deletions(-)
> 
> --- a/include/linux/cpuhotplug.h
> +++ b/include/linux/cpuhotplug.h
> @@ -91,7 +91,6 @@ enum cpuhp_state {
>  	CPUHP_PRINTK_DEAD,
>  	CPUHP_MM_MEMCQ_DEAD,
>  	CPUHP_XFS_DEAD,
> -	CPUHP_PERCPU_CNT_DEAD,
>  	CPUHP_RADIX_DEAD,
>  	CPUHP_PAGE_ALLOC,
>  	CPUHP_NET_DEV_DEAD,
> @@ -196,6 +195,7 @@ enum cpuhp_state {
>  	CPUHP_AP_SMPCFD_DYING,
>  	CPUHP_AP_X86_TBOOT_DYING,
>  	CPUHP_AP_ARM_CACHE_B15_RAC_DYING,
> +	CPUHP_AP_PERCPU_COUNTER_STARTING,
>  	CPUHP_AP_ONLINE,
>  	CPUHP_TEARDOWN_CPU,
>  
> --- a/lib/percpu_counter.c
> +++ b/lib/percpu_counter.c
> @@ -12,7 +12,7 @@
>  
>  #ifdef CONFIG_HOTPLUG_CPU
>  static LIST_HEAD(percpu_counters);
> -static DEFINE_SPINLOCK(percpu_counters_lock);
> +static DEFINE_RAW_SPINLOCK(percpu_counters_lock);
>  #endif
>  
>  #ifdef CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER
> @@ -126,13 +126,8 @@ EXPORT_SYMBOL(percpu_counter_sync);
>   * Add up all the per-cpu counts, return the result.  This is a more accurate
>   * but much slower version of percpu_counter_read_positive().
>   *
> - * We use the cpu mask of (cpu_online_mask | cpu_dying_mask) to capture sums
> - * from CPUs that are in the process of being taken offline. Dying cpus have
> - * been removed from the online mask, but may not have had the hotplug dead
> - * notifier called to fold the percpu count back into the global counter sum.
> - * By including dying CPUs in the iteration mask, we avoid this race condition
> - * so __percpu_counter_sum() just does the right thing when CPUs are being taken
> - * offline.
> + * Note: This function is inherently racy against the lockless fastpath of
> + * percpu_counter_add_batch() unless externaly serialized.
>   */
>  s64 __percpu_counter_sum(struct percpu_counter *fbc)
>  {
> @@ -142,10 +137,8 @@ s64 __percpu_counter_sum(struct percpu_c
>  
>  	raw_spin_lock_irqsave(&fbc->lock, flags);
>  	ret = fbc->count;
> -	for_each_cpu_or(cpu, cpu_online_mask, cpu_dying_mask) {
> -		s32 *pcount = per_cpu_ptr(fbc->counters, cpu);
> -		ret += *pcount;
> -	}
> +	for_each_online_cpu(cpu)
> +		ret += *per_cpu_ptr(fbc->counters, cpu);
>  	raw_spin_unlock_irqrestore(&fbc->lock, flags);
>  	return ret;
>  }
> @@ -167,9 +160,9 @@ int __percpu_counter_init(struct percpu_
>  
>  #ifdef CONFIG_HOTPLUG_CPU
>  	INIT_LIST_HEAD(&fbc->list);
> -	spin_lock_irqsave(&percpu_counters_lock, flags);
> +	raw_spin_lock_irqsave(&percpu_counters_lock, flags);
>  	list_add(&fbc->list, &percpu_counters);
> -	spin_unlock_irqrestore(&percpu_counters_lock, flags);
> +	raw_spin_unlock_irqrestore(&percpu_counters_lock, flags);
>  #endif
>  	return 0;
>  }
> @@ -185,9 +178,9 @@ void percpu_counter_destroy(struct percp
>  	debug_percpu_counter_deactivate(fbc);
>  
>  #ifdef CONFIG_HOTPLUG_CPU
> -	spin_lock_irqsave(&percpu_counters_lock, flags);
> +	raw_spin_lock_irqsave(&percpu_counters_lock, flags);
>  	list_del(&fbc->list);
> -	spin_unlock_irqrestore(&percpu_counters_lock, flags);
> +	raw_spin_unlock_irqrestore(&percpu_counters_lock, flags);
>  #endif
>  	free_percpu(fbc->counters);
>  	fbc->counters = NULL;
> @@ -197,22 +190,29 @@ EXPORT_SYMBOL(percpu_counter_destroy);
>  int percpu_counter_batch __read_mostly = 32;
>  EXPORT_SYMBOL(percpu_counter_batch);
>  
> -static int compute_batch_value(unsigned int cpu)
> +static void compute_batch_value(int offs)
>  {
> -	int nr = num_online_cpus();
> +	int nr = num_online_cpus() + offs;
> +
> +	percpu_counter_batch = max(32, nr * 2);
> +}
>  
> -	percpu_counter_batch = max(32, nr*2);
> +static int percpu_counter_cpu_starting(unsigned int cpu)
> +{
> +	/* If invoked during hotplug @cpu is not yet marked online. */
> +	compute_batch_value(cpu_online(cpu) ? 0 : 1);
>  	return 0;
>  }
>  
> -static int percpu_counter_cpu_dead(unsigned int cpu)
> +static int percpu_counter_cpu_dying(unsigned int cpu)
>  {
>  #ifdef CONFIG_HOTPLUG_CPU
>  	struct percpu_counter *fbc;
> +	unsigned long flags;
>  
> -	compute_batch_value(cpu);
> +	compute_batch_value(0);
>  
> -	spin_lock_irq(&percpu_counters_lock);
> +	raw_spin_lock_irqsave(&percpu_counters_lock, flags);
>  	list_for_each_entry(fbc, &percpu_counters, list) {
>  		s32 *pcount;
>  
> @@ -222,7 +222,7 @@ static int percpu_counter_cpu_dead(unsig
>  		*pcount = 0;
>  		raw_spin_unlock(&fbc->lock);
>  	}
> -	spin_unlock_irq(&percpu_counters_lock);
> +	raw_spin_unlock_irqrestore(&percpu_counters_lock, flags);
>  #endif
>  	return 0;
>  }
> @@ -256,15 +256,8 @@ EXPORT_SYMBOL(__percpu_counter_compare);
>  
>  static int __init percpu_counter_startup(void)
>  {
> -	int ret;
> -
> -	ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "lib/percpu_cnt:online",
> -				compute_batch_value, NULL);
> -	WARN_ON(ret < 0);
> -	ret = cpuhp_setup_state_nocalls(CPUHP_PERCPU_CNT_DEAD,
> -					"lib/percpu_cnt:dead", NULL,
> -					percpu_counter_cpu_dead);
> -	WARN_ON(ret < 0);
> +	WARN_ON(cpuhp_setup_state(CPUHP_AP_PERCPU_COUNTER_STARTING, "lib/percpu_counter:starting",
> +				  percpu_counter_cpu_starting, percpu_counter_cpu_dying));
>  	return 0;
>  }
>  module_init(percpu_counter_startup);
> 

Thanks for this work. This is a much more complete solution.

Acked-by: Dennis Zhou <dennis@kernel.org>

Thanks,
Dennis


  reply	other threads:[~2023-04-15  5:20 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-14 16:30 [patch 0/3] lib/percpu_counter, cpu/hotplug: Cure the cpu_dying_mask woes Thomas Gleixner
2023-04-14 16:30 ` [patch 1/3] lib/percpu_counter: Fix CPU hotplug handling Thomas Gleixner
2023-04-15  5:20   ` Dennis Zhou [this message]
2023-04-17  2:09   ` Dave Chinner
2023-04-17  8:09     ` Thomas Gleixner
2023-04-14 16:30 ` [patch 2/3] cpu/hotplug: Remove export of cpu_active_mask and cpu_dying_mask Thomas Gleixner
2023-04-14 16:30 ` [patch 3/3] cpu/hotplug: Get rid of cpu_dying_mask Thomas Gleixner
2023-05-03 11:50 ` [patch 0/3] lib/percpu_counter, cpu/hotplug: Cure the cpu_dying_mask woes Valentin Schneider
2023-12-30 22:39 ` Dennis Zhou
2024-01-12 23:36 [PATCH 0/3 v2] " Dennis Zhou
2024-01-12 23:36 ` [PATCH 1/3] lib/percpu_counter: Fix CPU hotplug handling Dennis Zhou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZDo0BHfm+iEGQyEX@snowbird \
    --to=dennis@kernel.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=cl@linux.com \
    --cc=dchinner@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@rasmusvillemoes.dk \
    --cc=peterz@infradead.org \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=vschneid@redhat.com \
    --cc=yebin10@huawei.com \
    --cc=yury.norov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox