linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Chih-En Lin <shiyn.lin@gmail.com>
To: David Hildenbrand <david@redhat.com>
Cc: Nadav Amit <namit@vmware.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Qi Zheng <zhengqi.arch@bytedance.com>,
	Matthew Wilcox <willy@infradead.org>,
	Christophe Leroy <christophe.leroy@csgroup.eu>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Iurii Zaikin <yzaikin@google.com>,
	Vlastimil Babka <vbabka@suse.cz>,
	William Kucharski <william.kucharski@oracle.com>,
	"Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>,
	Peter Xu <peterx@redhat.com>,
	Suren Baghdasaryan <surenb@google.com>,
	Arnd Bergmann <arnd@arndb.de>,
	Tong Tiangen <tongtiangen@huawei.com>,
	Pasha Tatashin <pasha.tatashin@soleen.com>,
	Li kunyu <kunyu@nfschina.com>,
	Anshuman Khandual <anshuman.khandual@arm.com>,
	Minchan Kim <minchan@kernel.org>, Yang Shi <shy828301@gmail.com>,
	Song Liu <song@kernel.org>, Miaohe Lin <linmiaohe@huawei.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Andy Lutomirski <luto@kernel.org>,
	Fenghua Yu <fenghua.yu@intel.com>,
	Dinglan Peng <peng301@purdue.edu>,
	Pedro Fonseca <pfonseca@purdue.edu>,
	Jim Huang <jserv@ccns.ncku.edu.tw>,
	Huichun Feng <foxhoundsk.tw@gmail.com>
Subject: Re: [RFC PATCH v2 9/9] mm: Introduce Copy-On-Write PTE table
Date: Thu, 29 Sep 2022 21:49:02 +0800	[thread overview]
Message-ID: <YzWiTqTvxPfWaY82@strix-laptop> (raw)
In-Reply-To: <YzWf7V5qzMjzMAk4@strix-laptop>

On Thu, Sep 29, 2022 at 09:38:53PM +0800, Chih-En Lin wrote:
> Sorry for replying late.
> 
> On Wed, Sep 28, 2022 at 04:03:19PM +0200, David Hildenbrand wrote:
> > On 27.09.22 21:53, Chih-En Lin wrote:
> > > On Tue, Sep 27, 2022 at 06:38:05PM +0000, Nadav Amit wrote:
> > > > I only skimmed the patches that you sent. The last couple of patches seem a
> > > > bit rough and dirty, so I am sorry to say that I skipped them (too many
> > > > “TODO” and “XXX” for my taste).
> > > > 
> > > > I am sure other will have better feedback than me. I understand there is a
> > > > tradeoff and that this mechanism is mostly for high performance
> > > > snapshotting/forking. It would be beneficial to see whether this mechanism
> > > > can somehow be combined with existing ones (mshare?).
> > > 
> > > Still thanks for your feedback. :)
> > > I'm looking at the PTE refcount and mshare patches. And, maybe it can
> > > combine with them in the future.
> > > 
> > > > The code itself can be improved. I found the reasoning about synchronization
> > > > and TLB flushes and synchronizations to be lacking, and the code to seem
> > > > potentially incorrect. Better comments would help, even if the code is
> > > > correct.
> > > > 
> > > > There are additional general questions. For instance, when sharing a
> > > > page-table, do you properly update the refcount/mapcount of the mapped
> > > > pages? And are there any possible interactions with THP?
> > > 
> > > Since access to those mapped pages will cost a lot of time, and this
> > > will make fork() even have more overhead. It will not update the
> > > refcount/mapcount of the mapped pages.
> > 
> > Oh no.
> > 
> > So we'd have pages logically mapped into two processes (two page table
> > structures), but the refcount/mapcount/PageAnonExclusive would not reflect
> > that?
> > 
> > Honestly, I don't think it is upstream material in that hacky form. No, we
> > don't need more COW CVEs or more COW over-complications that destabilize the
> > whole system.
> >
> 
> I know setting the write protection is not enough to prove the security
> safe since the previous COW CVEs are related to it. And, if skipping the
> accounting to reduce the overhead of fork() is not suitable for upstream
> , we can change it. But, I think COW to the table can still be an
> upstream material.
> 
> Recently the patches, like refcount for the empty user PTE page table
> pages and mshare for the pages shared between the processes require more
> PTE entries, showing that the modern system uses a lot of memory for the
> page table (especially the PTE table). So, I think the method, COW to
> the table, might reduce the memory usage for the side of the multiple
> users PTE page table.

Sorry, I think I need to explain more about "the multiple users PTE page
table". It means that it has more than one user holding the page table
and the mapped page that still has the same context. So, we can use COW
to reduce the memory usage at first.

>
> > IMHO, a relaxed form that focuses on only the memory consumption reduction
> > could *possibly* be accepted upstream if it's not too invasive or complex.
> > During fork(), we'd do exactly what we used to do to PTEs (increment
> > mapcount, refcount, trying to clear PageAnonExclusive, map the page R/O,
> > duplicate swap entries; all while holding the page table lock), however,
> > sharing the prepared page table with the child process using COW after we
> > prepared it.
> > 
> > Any (most once we want to *optimize* rmap handling) modification attempts
> > require breaking COW -- copying the page table for the faulting process. But
> > at that point, the PTEs are already write-protected and properly accounted
> > (refcount/mapcount/PageAnonExclusive).
> > 
> > Doing it that way might not require any questionable GUP hacks and swapping,
> > MMU notifiers etc. "might just work as expected" because the accounting
> > remains unchanged" -- we simply de-duplicate the page table itself we'd have
> > after fork and any modification attempts simply replace the mapped copy.
> 
> Agree.
> However for GUP hacks, if we want to do the COW to page table, we still
> need the hacks in this patch (using the COW_PTE_OWN_EXCLUSIVE flag to
> check whether the PTE table is available or not before we do the COW to
> the table). Otherwise, it will be more complicated since it might need
> to handle situations like while preparing the COW work, it just figuring
> out that it needs to duplicate the whole table and roll back (recover
> the state and copy it to new table). Hopefully, I'm not wrong here.
> 
> > But devil is in the detail (page table lock, TLB flushing).
> 
> Sure, it might be an overhead in the page fault and needs to be handled
> carefully. ;)
> 
> > "will make fork() even have more overhead" is not a good excuse for such
> > complexity/hacks -- sure, it will make your benchmark results look better in
> > comparison ;)
> 
> ;);)
> I think that, even if we do the accounting with the COW page table, it
> still has a little bit improve.
> 
> > -- 
> > Thanks,
> > 
> > David / dhildenb
> >
> 
> Thanks,
> Chih-En Lin

Thanks,
Chih-En Lin


  reply	other threads:[~2022-09-29 13:49 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-27 16:29 [RFC PATCH v2 0/9] Introduce Copy-On-Write to Page Table Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 1/9] mm: Add new mm flags for Copy-On-Write PTE table Chih-En Lin
2022-09-27 17:23   ` Nadav Amit
2022-09-27 17:36     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 2/9] mm: pgtable: Add sysctl to enable COW PTE Chih-En Lin
2022-09-27 17:27   ` Nadav Amit
2022-09-27 18:05     ` Chih-En Lin
2022-09-27 21:22   ` John Hubbard
2022-09-28  8:36     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 3/9] mm, pgtable: Add ownership to PTE table Chih-En Lin
2022-09-27 17:30   ` Nadav Amit
2022-09-27 18:23     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 4/9] mm: Add COW PTE fallback functions Chih-En Lin
2022-09-27 17:51   ` Nadav Amit
2022-09-27 19:00     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 5/9] mm, pgtable: Add a refcount to PTE table Chih-En Lin
2022-09-27 17:59   ` Nadav Amit
2022-09-27 19:07     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 6/9] mm, pgtable: Add COW_PTE_OWNER_EXCLUSIVE flag Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 7/9] mm: Add the break COW PTE handler Chih-En Lin
2022-09-27 18:15   ` Nadav Amit
2022-09-27 19:23     ` Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 8/9] mm: Handle COW PTE with reclaim algorithm Chih-En Lin
2022-09-27 16:29 ` [RFC PATCH v2 9/9] mm: Introduce Copy-On-Write PTE table Chih-En Lin
2022-09-27 18:38   ` Nadav Amit
2022-09-27 19:53     ` Chih-En Lin
2022-09-27 21:26       ` John Hubbard
2022-09-28  8:52         ` Chih-En Lin
2022-09-28 14:03       ` David Hildenbrand
2022-09-29 13:38         ` Chih-En Lin
2022-09-29 13:49           ` Chih-En Lin [this message]
2022-09-29 17:24           ` David Hildenbrand
2022-09-29 18:29             ` Chih-En Lin
2022-09-29 18:38               ` David Hildenbrand
2022-09-29 18:57                 ` Chih-En Lin
2022-09-29 19:00                   ` David Hildenbrand
2022-09-29 18:40               ` Nadav Amit
2022-09-29 19:02                 ` Chih-En Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YzWiTqTvxPfWaY82@strix-laptop \
    --to=shiyn.lin@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=arnd@arndb.de \
    --cc=bigeasy@linutronix.de \
    --cc=christophe.leroy@csgroup.eu \
    --cc=david@redhat.com \
    --cc=fenghua.yu@intel.com \
    --cc=foxhoundsk.tw@gmail.com \
    --cc=jserv@ccns.ncku.edu.tw \
    --cc=keescook@chromium.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=kunyu@nfschina.com \
    --cc=linmiaohe@huawei.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=luto@kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=minchan@kernel.org \
    --cc=namit@vmware.com \
    --cc=pasha.tatashin@soleen.com \
    --cc=peng301@purdue.edu \
    --cc=peterx@redhat.com \
    --cc=pfonseca@purdue.edu \
    --cc=shy828301@gmail.com \
    --cc=song@kernel.org \
    --cc=surenb@google.com \
    --cc=tglx@linutronix.de \
    --cc=tongtiangen@huawei.com \
    --cc=vbabka@suse.cz \
    --cc=william.kucharski@oracle.com \
    --cc=willy@infradead.org \
    --cc=yzaikin@google.com \
    --cc=zhengqi.arch@bytedance.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox