linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Hyeonggon Yoo <42.hyeyoo@gmail.com>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: linux-mm@kvack.org, Roman Gushchin <guro@fb.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>,
	David Rientjes <rientjes@google.com>,
	Christoph Lameter <cl@linux.com>,
	Pekka Enberg <penberg@kernel.org>
Subject: Re: [PATCH 5/5] mm/slub: Refactor deactivate_slab()
Date: Fri, 25 Feb 2022 09:50:14 +0000	[thread overview]
Message-ID: <YhimVo7oKmnMSkYS@ip-172-31-19-208.ap-northeast-1.compute.internal> (raw)
In-Reply-To: <YhiikbXALDX6fFyr@ip-172-31-19-208.ap-northeast-1.compute.internal>

On Fri, Feb 25, 2022 at 09:34:09AM +0000, Hyeonggon Yoo wrote:
> On Thu, Feb 24, 2022 at 07:16:11PM +0100, Vlastimil Babka wrote:
> > On 2/21/22 11:53, Hyeonggon Yoo wrote:
> > > Simply deactivate_slab() by removing variable 'lock' and replacing
> > > 'l' and 'm' with 'mode'. Instead, remove slab from list and unlock
> > > n->list_lock when cmpxchg_double() fails, and then retry.
> > > 
> > > One slight functional change is releasing and taking n->list_lock again
> > > when cmpxchg_double() fails. This is not harmful because SLUB avoids
> > > deactivating slabs as much as possible.
> > > 
> > > Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
> > 
> > Hm I wonder if we could simplify even a bit more. Do we have to actually
> > place the slab on a partial (full) list before the cmpxchg, only to remove
> > it when cmpxchg fails? Seems it's to avoid anyone else seeing the slab
> > un-frozen, but not on the list, which would be unexpected. However if anyone
> > sees such slab, they have to take the list_lock first to start working with
> > the slab... so this should be safe, because we hold the list_lock here, and
> > will place the slab on the list before we release it. But it thus shouldn't
> > matter if the placement happens before or after a successful cmpxchg, no? So
> > we can only do it once after a successful cmpxchg and need no undo's?
> >
> 
> My thought was similar. But after testing I noticed that &n->list_lock prevents
> race between __slab_free() and deactivate_slab().
> 
> > Specifically AFAIK the only possible race should be with a __slab_free()
> > which might observe !was_frozen after we succeed an unfreezing cmpxchg and
> > go through the
> > "} else { /* Needs to be taken off a list */"
> > branch but then it takes the list_lock as the first thing, so will be able
> > to proceed only after the slab is actually on the list.
> > 
> > Do I miss anything or would you agree?
> >
> 
> It's so tricky.
> 
> I tried to simplify more as you said. Seeing frozen slab on list was not
> problem. But the problem was that something might interfere between
> cmpxchg_double() and taking spinlock.
> 
> This is what I faced:
> 
> 	CPU A				CPU B
> deactivate_slab() {			__slab_free() {
> 	/* slab is full */
> 	slab.frozen = 0;
> 	cmpxchg_double();
> 						/* Hmm... 
> 						slab->frozen == 0 &&
> 						slab->freelist != NULL?
> 						Oh This must be on the list.. */
						Oh this is wrong.
						slab->freelist must be
						NULL because it's full
						slab.

						It's more complex
						than I thought...


> 						spin_lock_irqsave();
> 						cmpxchg_double();
> 						/* Corruption: slab
> 						 * was not yet inserted to
> 						 * list but try removing */
> 						remove_full();
> 						spin_unlock_irqrestore();
> 					}
> 	spin_lock_irqsave();
> 	add_full();
> 	spin_unlock_irqrestore();
> }

So it was...

 	CPU A				CPU B
 deactivate_slab() {			__slab_free() {
 	/* slab is full */
 	slab.frozen = 0;
 	cmpxchg_double();
 						/*
							Hmm... 
							!was_frozen &&
							prior == NULL?
							Let's freeze this!
						*/
						put_cpu_partial();
 					}
 	spin_lock_irqsave();
 	add_full();
	/* It's now frozen by CPU B and at the same time on full list */
 	spin_unlock_irqrestore();

And &n->list_lock prevents such a race.

> 
> I think it's quite confusing because it's protecting code, not data.
> 
> Would you have an idea to solve it, or should we add a comment for this?
> 
> > > ---
> > >  mm/slub.c | 74 +++++++++++++++++++++++++------------------------------
> > >  1 file changed, 33 insertions(+), 41 deletions(-)
> > > 
> > > diff --git a/mm/slub.c b/mm/slub.c
> > > index a4964deccb61..2d0663befb9e 100644
> > > --- a/mm/slub.c
> > > +++ b/mm/slub.c
> > > @@ -2350,8 +2350,8 @@ static void deactivate_slab(struct kmem_cache *s, struct slab *slab,
> > >  {
> > >  	enum slab_modes { M_NONE, M_PARTIAL, M_FULL, M_FREE };
> > >  	struct kmem_cache_node *n = get_node(s, slab_nid(slab));
> > > -	int lock = 0, free_delta = 0;
> > > -	enum slab_modes l = M_NONE, m = M_NONE;
> > > +	int free_delta = 0;
> > > +	enum slab_modes mode = M_NONE;
> > >  	void *nextfree, *freelist_iter, *freelist_tail;
> > >  	int tail = DEACTIVATE_TO_HEAD;
> > >  	unsigned long flags = 0;
> > > @@ -2420,57 +2420,49 @@ static void deactivate_slab(struct kmem_cache *s, struct slab *slab,
> > >  	new.frozen = 0;
> > >  
> > >  	if (!new.inuse && n->nr_partial >= s->min_partial)
> > > -		m = M_FREE;
> > > +		mode = M_FREE;
> > >  	else if (new.freelist) {
> > > -		m = M_PARTIAL;
> > > -		if (!lock) {
> > > -			lock = 1;
> > > -			/*
> > > -			 * Taking the spinlock removes the possibility that
> > > -			 * acquire_slab() will see a slab that is frozen
> > > -			 */
> > > -			spin_lock_irqsave(&n->list_lock, flags);
> > > -		}
> > > -	} else {
> > > -		m = M_FULL;
> > > -		if (kmem_cache_debug_flags(s, SLAB_STORE_USER) && !lock) {
> > > -			lock = 1;
> > > -			/*
> > > -			 * This also ensures that the scanning of full
> > > -			 * slabs from diagnostic functions will not see
> > > -			 * any frozen slabs.
> > > -			 */
> > > -			spin_lock_irqsave(&n->list_lock, flags);
> > > -		}
> > > +		mode = M_PARTIAL;
> > > +		/*
> > > +		 * Taking the spinlock removes the possibility that
> > > +		 * acquire_slab() will see a slab that is frozen
> > > +		 */
> > > +		spin_lock_irqsave(&n->list_lock, flags);
> > > +		add_partial(n, slab, tail);
> > > +	} else if (kmem_cache_debug_flags(s, SLAB_STORE_USER)) {
> > > +		mode = M_FULL;
> > > +		/*
> > > +		 * This also ensures that the scanning of full
> > > +		 * slabs from diagnostic functions will not see
> > > +		 * any frozen slabs.
> > > +		 */
> > > +		spin_lock_irqsave(&n->list_lock, flags);
> > > +		add_full(s, n, slab);
> > >  	}
> > >  
> > > -	if (l != m) {
> > > -		if (l == M_PARTIAL)
> > > -			remove_partial(n, slab);
> > > -		else if (l == M_FULL)
> > > -			remove_full(s, n, slab);
> > >  
> > > -		if (m == M_PARTIAL)
> > > -			add_partial(n, slab, tail);
> > > -		else if (m == M_FULL)
> > > -			add_full(s, n, slab);
> > > -	}
> > > -
> > > -	l = m;
> > >  	if (!cmpxchg_double_slab(s, slab,
> > >  				old.freelist, old.counters,
> > >  				new.freelist, new.counters,
> > > -				"unfreezing slab"))
> > > +				"unfreezing slab")) {
> > > +		if (mode == M_PARTIAL) {
> > > +			remove_partial(n, slab);
> > > +			spin_unlock_irqrestore(&n->list_lock, flags);
> > > +		} else if (mode == M_FULL) {
> > > +			remove_full(s, n, slab);
> > > +			spin_unlock_irqrestore(&n->list_lock, flags);
> > > +		}
> > >  		goto redo;
> > > +	}
> > >  
> > > -	if (lock)
> > > -		spin_unlock_irqrestore(&n->list_lock, flags);
> > >  
> > > -	if (m == M_PARTIAL)
> > > +	if (mode == M_PARTIAL) {
> > > +		spin_unlock_irqrestore(&n->list_lock, flags);
> > >  		stat(s, tail);
> > > -	else if (m == M_FULL)
> > > +	} else if (mode == M_FULL) {
> > > +		spin_unlock_irqrestore(&n->list_lock, flags);
> > >  		stat(s, DEACTIVATE_FULL);
> > > -	else if (m == M_FREE) {
> > > +	} else if (mode == M_FREE) {
> > >  		stat(s, DEACTIVATE_EMPTY);
> > >  		discard_slab(s, slab);
> > >  		stat(s, FREE_SLAB);
> > 
> 
> -- 
> Thank you, You are awesome!
> Hyeonggon :-)

-- 
Thank you, You are awesome!
Hyeonggon :-)


  reply	other threads:[~2022-02-25  9:50 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-21 10:53 [PATCH 0/5] slab cleanups Hyeonggon Yoo
2022-02-21 10:53 ` [PATCH 1/5] mm/sl[au]b: Unify __ksize() Hyeonggon Yoo
2022-02-23 18:39   ` Vlastimil Babka
2022-02-23 19:06     ` Marco Elver
2022-02-24 12:26       ` Vlastimil Babka
2022-02-21 10:53 ` [PATCH 2/5] mm/sl[auo]b: Do not export __ksize() Hyeonggon Yoo
2022-02-21 15:46   ` Matthew Wilcox
2022-02-23  3:26     ` Hyeonggon Yoo
2022-02-23 18:40     ` Vlastimil Babka
2022-02-21 10:53 ` [PATCH 3/5] mm/slab: Do not call kmalloc_large() for unsupported size Hyeonggon Yoo
2022-02-21 15:53   ` Matthew Wilcox
2022-02-22  8:10     ` Hyeonggon Yoo
2022-02-22 19:59       ` Matthew Wilcox
2022-02-23  3:24         ` Hyeonggon Yoo
2022-02-24 12:48   ` Vlastimil Babka
2022-02-24 13:31     ` Hyeonggon Yoo
2022-02-24 15:08       ` Vlastimil Babka
2022-02-21 10:53 ` [PATCH 4/5] mm/slub: Limit min_partial only in cache creation Hyeonggon Yoo
2022-02-22 23:48   ` David Rientjes
2022-02-23  3:37     ` Hyeonggon Yoo
2022-02-24 12:52       ` Vlastimil Babka
2022-02-21 10:53 ` [PATCH 5/5] mm/slub: Refactor deactivate_slab() Hyeonggon Yoo
2022-02-24 18:16   ` Vlastimil Babka
2022-02-25  9:34     ` Hyeonggon Yoo
2022-02-25  9:50       ` Hyeonggon Yoo [this message]
2022-02-25 10:07         ` Vlastimil Babka
2022-02-25 10:26           ` Hyeonggon Yoo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YhimVo7oKmnMSkYS@ip-172-31-19-208.ap-northeast-1.compute.internal \
    --to=42.hyeyoo@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=cl@linux.com \
    --cc=guro@fb.com \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=penberg@kernel.org \
    --cc=rientjes@google.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox