linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Rafael Aquini <aquini@redhat.com>
To: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: akpm@linux-foundation.org, tkhai@ya.ru, hannes@cmpxchg.org,
	shakeelb@google.com, mhocko@kernel.org, roman.gushchin@linux.dev,
	muchun.song@linux.dev, david@redhat.com, shy828301@gmail.com,
	sultan@kerneltoast.com, dave@stgolabs.net,
	penguin-kernel@i-love.sakura.ne.jp, paulmck@kernel.org,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/7] mm: vmscan: make global slab shrink lockless
Date: Thu, 23 Feb 2023 10:26:45 -0500	[thread overview]
Message-ID: <Y/eFtTO+8kXlsW7x@optiplex-fbsd> (raw)
In-Reply-To: <20230223132725.11685-3-zhengqi.arch@bytedance.com>

On Thu, Feb 23, 2023 at 09:27:20PM +0800, Qi Zheng wrote:
> The shrinker_rwsem is a global lock in shrinkers subsystem,
> it is easy to cause blocking in the following cases:
> 
> a. the write lock of shrinker_rwsem was held for too long.
>    For example, there are many memcgs in the system, which
>    causes some paths to hold locks and traverse it for too
>    long. (e.g. expand_shrinker_info())
> b. the read lock of shrinker_rwsem was held for too long,
>    and a writer came at this time. Then this writer will be
>    forced to wait and block all subsequent readers.
>    For example:
>    - be scheduled when the read lock of shrinker_rwsem is
>      held in do_shrink_slab()
>    - some shrinker are blocked for too long. Like the case
>      mentioned in the patchset[1].
> 
> Therefore, many times in history ([2],[3],[4],[5]), some
> people wanted to replace shrinker_rwsem reader with SRCU,
> but they all gave up because SRCU was not unconditionally
> enabled.
> 
> But now, since commit 1cd0bd06093c ("rcu: Remove CONFIG_SRCU"),
> the SRCU is unconditionally enabled. So it's time to use
> SRCU to protect readers who previously held shrinker_rwsem.
> 
> [1]. https://lore.kernel.org/lkml/20191129214541.3110-1-ptikhomirov@virtuozzo.com/
> [2]. https://lore.kernel.org/all/1437080113.3596.2.camel@stgolabs.net/
> [3]. https://lore.kernel.org/lkml/1510609063-3327-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp/
> [4]. https://lore.kernel.org/lkml/153365347929.19074.12509495712735843805.stgit@localhost.localdomain/
> [5]. https://lore.kernel.org/lkml/20210927074823.5825-1-sultan@kerneltoast.com/
> 
> Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
> ---
>  mm/vmscan.c | 27 +++++++++++----------------
>  1 file changed, 11 insertions(+), 16 deletions(-)
> 
> diff --git a/mm/vmscan.c b/mm/vmscan.c
> index 9f895ca6216c..02987a6f95d1 100644
> --- a/mm/vmscan.c
> +++ b/mm/vmscan.c
> @@ -202,6 +202,7 @@ static void set_task_reclaim_state(struct task_struct *task,
>  
>  LIST_HEAD(shrinker_list);
>  DECLARE_RWSEM(shrinker_rwsem);
> +DEFINE_SRCU(shrinker_srcu);
>  
>  #ifdef CONFIG_MEMCG
>  static int shrinker_nr_max;
> @@ -706,7 +707,7 @@ void free_prealloced_shrinker(struct shrinker *shrinker)
>  void register_shrinker_prepared(struct shrinker *shrinker)
>  {
>  	down_write(&shrinker_rwsem);

I think you could revert the rwsem back to a simple mutex, now.

> -	list_add_tail(&shrinker->list, &shrinker_list);
> +	list_add_tail_rcu(&shrinker->list, &shrinker_list);
>  	shrinker->flags |= SHRINKER_REGISTERED;
>  	shrinker_debugfs_add(shrinker);
>  	up_write(&shrinker_rwsem);
> @@ -760,13 +761,15 @@ void unregister_shrinker(struct shrinker *shrinker)
>  		return;
>  
>  	down_write(&shrinker_rwsem);
> -	list_del(&shrinker->list);
> +	list_del_rcu(&shrinker->list);
>  	shrinker->flags &= ~SHRINKER_REGISTERED;
>  	if (shrinker->flags & SHRINKER_MEMCG_AWARE)
>  		unregister_memcg_shrinker(shrinker);
>  	debugfs_entry = shrinker_debugfs_remove(shrinker);
>  	up_write(&shrinker_rwsem);
>  
> +	synchronize_srcu(&shrinker_srcu);
> +
>  	debugfs_remove_recursive(debugfs_entry);
>  
>  	kfree(shrinker->nr_deferred);
> @@ -786,6 +789,7 @@ void synchronize_shrinkers(void)
>  {
>  	down_write(&shrinker_rwsem);
>  	up_write(&shrinker_rwsem);
> +	synchronize_srcu(&shrinker_srcu);
>  }
>  EXPORT_SYMBOL(synchronize_shrinkers);
>  
> @@ -996,6 +1000,7 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid,
>  {
>  	unsigned long ret, freed = 0;
>  	struct shrinker *shrinker;
> +	int srcu_idx;
>  
>  	/*
>  	 * The root memcg might be allocated even though memcg is disabled
> @@ -1007,10 +1012,10 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid,
>  	if (!mem_cgroup_disabled() && !mem_cgroup_is_root(memcg))
>  		return shrink_slab_memcg(gfp_mask, nid, memcg, priority);
>  
> -	if (!down_read_trylock(&shrinker_rwsem))
> -		goto out;
> +	srcu_idx = srcu_read_lock(&shrinker_srcu);
>  
> -	list_for_each_entry(shrinker, &shrinker_list, list) {
> +	list_for_each_entry_srcu(shrinker, &shrinker_list, list,
> +				 srcu_read_lock_held(&shrinker_srcu)) {
>  		struct shrink_control sc = {
>  			.gfp_mask = gfp_mask,
>  			.nid = nid,
> @@ -1021,19 +1026,9 @@ static unsigned long shrink_slab(gfp_t gfp_mask, int nid,
>  		if (ret == SHRINK_EMPTY)
>  			ret = 0;
>  		freed += ret;
> -		/*
> -		 * Bail out if someone want to register a new shrinker to
> -		 * prevent the registration from being stalled for long periods
> -		 * by parallel ongoing shrinking.
> -		 */
> -		if (rwsem_is_contended(&shrinker_rwsem)) {
> -			freed = freed ? : 1;
> -			break;
> -		}
>  	}
>  
> -	up_read(&shrinker_rwsem);
> -out:
> +	srcu_read_unlock(&shrinker_srcu, srcu_idx);
>  	cond_resched();
>  	return freed;
>  }
> -- 
> 2.20.1
> 
> 



  reply	other threads:[~2023-02-23 15:26 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-23 13:27 [PATCH v2 0/7] make " Qi Zheng
2023-02-23 13:27 ` [PATCH v2 1/7] mm: vmscan: add a map_nr_max field to shrinker_info Qi Zheng
2023-02-25  8:18   ` Qi Zheng
2023-02-25 15:14     ` Kirill Tkhai
2023-02-25 15:52       ` Qi Zheng
2023-02-26 13:54       ` Qi Zheng
2023-02-23 13:27 ` [PATCH v2 2/7] mm: vmscan: make global slab shrink lockless Qi Zheng
2023-02-23 15:26   ` Rafael Aquini [this message]
2023-02-23 15:37     ` Rafael Aquini
2023-02-24  4:09       ` Qi Zheng
2023-02-23 18:24   ` Sultan Alsawaf
2023-02-23 18:39     ` Paul E. McKenney
2023-02-23 19:18       ` Sultan Alsawaf
2023-02-24  4:00     ` Qi Zheng
2023-02-24  4:16       ` Qi Zheng
2023-02-24  8:20       ` Sultan Alsawaf
2023-02-24 10:12         ` Qi Zheng
2023-02-24 21:02       ` Kirill Tkhai
2023-02-24 21:14         ` Kirill Tkhai
2023-02-25  8:08           ` Qi Zheng
2023-02-25 15:30             ` Kirill Tkhai
2023-02-25 15:57               ` Qi Zheng
2023-02-25 16:17                 ` Kirill Tkhai
2023-02-25 16:37                   ` Qi Zheng
2023-02-25 21:28                     ` Kirill Tkhai
2023-02-26 13:56                       ` Qi Zheng
2023-02-23 13:27 ` [PATCH v2 3/7] mm: vmscan: make memcg " Qi Zheng
2023-02-23 13:27 ` [PATCH v2 4/7] mm: shrinkers: make count and scan in shrinker debugfs lockless Qi Zheng
2023-02-23 13:27 ` [PATCH v2 5/7] mm: vmscan: hold write lock to reparent shrinker nr_deferred Qi Zheng
2023-02-23 13:27 ` [PATCH v2 6/7] mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers() Qi Zheng
2023-02-23 13:27 ` [PATCH v2 7/7] mm: shrinkers: convert shrinker_rwsem to mutex Qi Zheng
2023-02-23 18:19 ` [PATCH v2 0/7] make slab shrink lockless Paul E. McKenney
2023-02-24  4:08   ` Qi Zheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y/eFtTO+8kXlsW7x@optiplex-fbsd \
    --to=aquini@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=dave@stgolabs.net \
    --cc=david@redhat.com \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=muchun.song@linux.dev \
    --cc=paulmck@kernel.org \
    --cc=penguin-kernel@i-love.sakura.ne.jp \
    --cc=roman.gushchin@linux.dev \
    --cc=shakeelb@google.com \
    --cc=shy828301@gmail.com \
    --cc=sultan@kerneltoast.com \
    --cc=tkhai@ya.ru \
    --cc=zhengqi.arch@bytedance.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox