From: Hugh Dickins <hugh@veritas.com>
To: Pavel Emelyanov <xemul@openvz.org>
Cc: Andrew Morton <akpm@osdl.org>, Linux MM <linux-mm@kvack.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
devel@openvz.org
Subject: Re: [PATCH][SHMEM] Factor out sbi->free_inodes manipulations
Date: Fri, 23 Nov 2007 13:41:55 +0000 (GMT) [thread overview]
Message-ID: <Pine.LNX.4.64.0711231325510.18348@blonde.wat.veritas.com> (raw)
In-Reply-To: <4745B4F2.3060308@openvz.org>
Looks good, but we can save slightly more there (depending on config),
and I found your inc/dec names a little confusing, since the count is
going the other way: how do you feel about this version? (I'd like it
better if those helpers could take a struct inode *, but they cannot.)
Hugh
From: Pavel Emelyanov <xemul@openvz.org>
The shmem_sb_info structure has a number of free_inodes. This
value is altered in appropriate places under spinlock and with
the sbi->max_inodes != 0 check.
Consolidate these manipulations into two helpers.
This is minus 42 bytes of shmem.o and minus 4 :) lines of code.
Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
---
mm/shmem.c | 72 ++++++++++++++++++++++++---------------------------
1 file changed, 34 insertions(+), 38 deletions(-)
--- 2.6.24-rc3/mm/shmem.c 2007-11-07 04:21:45.000000000 +0000
+++ linux/mm/shmem.c 2007-11-23 12:43:28.000000000 +0000
@@ -207,6 +207,31 @@ static void shmem_free_blocks(struct ino
}
}
+static int shmem_reserve_inode(struct super_block *sb)
+{
+ struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
+ if (sbinfo->max_inodes) {
+ spin_lock(&sbinfo->stat_lock);
+ if (!sbinfo->free_inodes) {
+ spin_unlock(&sbinfo->stat_lock);
+ return -ENOMEM;
+ }
+ sbinfo->free_inodes--;
+ spin_unlock(&sbinfo->stat_lock);
+ }
+ return 0;
+}
+
+static void shmem_free_inode(struct super_block *sb)
+{
+ struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
+ if (sbinfo->max_inodes) {
+ spin_lock(&sbinfo->stat_lock);
+ sbinfo->free_inodes++;
+ spin_unlock(&sbinfo->stat_lock);
+ }
+}
+
/*
* shmem_recalc_inode - recalculate the size of an inode
*
@@ -762,7 +787,6 @@ static int shmem_notify_change(struct de
static void shmem_delete_inode(struct inode *inode)
{
- struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
struct shmem_inode_info *info = SHMEM_I(inode);
if (inode->i_op->truncate == shmem_truncate) {
@@ -777,11 +801,7 @@ static void shmem_delete_inode(struct in
}
}
BUG_ON(inode->i_blocks);
- if (sbinfo->max_inodes) {
- spin_lock(&sbinfo->stat_lock);
- sbinfo->free_inodes++;
- spin_unlock(&sbinfo->stat_lock);
- }
+ shmem_free_inode(inode->i_sb);
clear_inode(inode);
}
@@ -1398,15 +1418,8 @@ shmem_get_inode(struct super_block *sb,
struct shmem_inode_info *info;
struct shmem_sb_info *sbinfo = SHMEM_SB(sb);
- if (sbinfo->max_inodes) {
- spin_lock(&sbinfo->stat_lock);
- if (!sbinfo->free_inodes) {
- spin_unlock(&sbinfo->stat_lock);
- return NULL;
- }
- sbinfo->free_inodes--;
- spin_unlock(&sbinfo->stat_lock);
- }
+ if (shmem_reserve_inode(sb))
+ return NULL;
inode = new_inode(sb);
if (inode) {
@@ -1450,11 +1463,8 @@ shmem_get_inode(struct super_block *sb,
NULL);
break;
}
- } else if (sbinfo->max_inodes) {
- spin_lock(&sbinfo->stat_lock);
- sbinfo->free_inodes++;
- spin_unlock(&sbinfo->stat_lock);
- }
+ } else
+ shmem_free_inode(sb);
return inode;
}
@@ -1797,22 +1807,14 @@ static int shmem_create(struct inode *di
static int shmem_link(struct dentry *old_dentry, struct inode *dir, struct dentry *dentry)
{
struct inode *inode = old_dentry->d_inode;
- struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
/*
* No ordinary (disk based) filesystem counts links as inodes;
* but each new link needs a new dentry, pinning lowmem, and
* tmpfs dentries cannot be pruned until they are unlinked.
*/
- if (sbinfo->max_inodes) {
- spin_lock(&sbinfo->stat_lock);
- if (!sbinfo->free_inodes) {
- spin_unlock(&sbinfo->stat_lock);
- return -ENOSPC;
- }
- sbinfo->free_inodes--;
- spin_unlock(&sbinfo->stat_lock);
- }
+ if (shmem_reserve_inode(inode->i_sb))
+ return -ENOSPC;
dir->i_size += BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
@@ -1827,14 +1829,8 @@ static int shmem_unlink(struct inode *di
{
struct inode *inode = dentry->d_inode;
- if (inode->i_nlink > 1 && !S_ISDIR(inode->i_mode)) {
- struct shmem_sb_info *sbinfo = SHMEM_SB(inode->i_sb);
- if (sbinfo->max_inodes) {
- spin_lock(&sbinfo->stat_lock);
- sbinfo->free_inodes++;
- spin_unlock(&sbinfo->stat_lock);
- }
- }
+ if (inode->i_nlink > 1 && !S_ISDIR(inode->i_mode))
+ shmem_free_inode(inode->i_sb);
dir->i_size -= BOGO_DIRENT_SIZE;
inode->i_ctime = dir->i_ctime = dir->i_mtime = CURRENT_TIME;
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2007-11-23 13:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-11-22 16:57 Pavel Emelyanov
2007-11-23 13:41 ` Hugh Dickins [this message]
2007-11-23 13:53 ` Pavel Emelyanov
2007-11-27 5:23 ` Andrew Morton
2007-11-27 8:36 ` Hugh Dickins
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0711231325510.18348@blonde.wat.veritas.com \
--to=hugh@veritas.com \
--cc=akpm@osdl.org \
--cc=devel@openvz.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=xemul@openvz.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox