PXELINUX 1.62 2001-04-24  Copyright (C) 1994-2001 H. Peter Anvin
boot: 
Booting from local disk...

LILO boot: 26t2
Loading 26t2...............................
Linux version 2.6.0-test2-mm5 (marcelo@dev8-005) (gcc version 2.96 20000731 (Red Hat Linux
 7.3 2.96-110)) #1 SMP Thu Aug 7 13:16:20 PDT 2003
Video mode to be used for restore is f00
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000efff6500 (usable)
 BIOS-e820: 00000000efff6500 - 00000000f0000000 (ACPI data)
 BIOS-e820: 00000000fffb0000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000400000000 (usable)
15488MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 0009d940
hm, page 0009d000 reserved twice.
hm, page 0009e000 reserved twice.
hm, page 0009d000 reserved twice.
hm, page 0009e000 reserved twice.
On node 0 totalpages: 4194304
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 3964928 pages, LIFO batch:16
IBM machine detected. Enabling interrupts during APM calls.
IBM machine detected. Disabling SMBus accesses.
ACPI: RSDP (v000 IBM                        ) @ 0x000fdfe0
CPI: RSDT (v001 IBM    SERCOMAN 00000.04096) @ 0xefffff80
ACPI: FADT (v001 IBM    SERCOMAN 00000.04096) @ 0xefffff00
ACPI: MADT (v001 IBM    SERCOMAN 00000.04096) @ 0xeffffe40
ACPI: DSDT (v001    IBM SERCOMAN 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x07] enabled)
Processor #7 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
Processor #4 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
Processor #5 6:10 APIC version 17
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled)
Processor #6 6:10 APIC version 17
ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] polarity[0x0] trigger[0x0] lint[0x1])
ACPI: IOAPIC (id[0x0e] address[0xfec00000] global_irq_base[0x0])
IOAPIC[0]: Assigned apic_id 14
IOAPIC[0]: apic_id 14, version 19, address 0xfec00000, IRQ 0-63
ACPI: INT_SRC_OVR (bus[0] irq[0x8] global_irq[0x8] polarity[0x3] trigger[0x1])
ACPI: NMI_SRC (polarity[0x0] trigger[0x0] global_irq[0x3a])
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=26t2 ro root=806 BOOT_FILE=/boot/vmlinuz-260t2m5 cons
ole=ttyS0,38400n8 console=tty1
current: c039b940
current->thread_info: c041e000
Initializing CPU#0
PID hash table entries: 4096 (order 12: 32768 bytes)
Detected 700.104 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1376.25 BogoMIPS
Memory: 16326400k/16777216k available (2284k kernel code, 187512k reserved, 901k data, 276
k init, 15597528k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 1048576 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
-> /dev
-> /dev/console
-> /root
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
CPU0: Intel Pentium III (Cascades) stepping 04
per-CPU timeslice cutoff: 2923.17 usecs.
task migration cache decay timeout: 3 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/0 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Cascades) stepping 04
Booting processor 2/1 eip 2000
Initializing CPU#2
masked ExtINT on CPU#2
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
CPU2: Intel Pentium III (Cascades) stepping 04
Booting processor 3/2 eip 2000
Initializing CPU#3
masked ExtINT on CPU#3
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
CPU3: Intel Pentium III (Cascades) stepping 04
Booting processor 4/3 eip 2000
Initializing CPU#4
masked ExtINT on CPU#4
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#4.
CPU4: Intel Pentium III (Cascades) stepping 04
Booting processor 5/4 eip 2000
Initializing CPU#5
masked ExtINT on CPU#5
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#5.
CPU5: Intel Pentium III (Cascades) stepping 04
Booting processor 6/5 eip 2000
Initializing CPU#6
masked ExtINT on CPU#6
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#6.
CPU6: Intel Pentium III (Cascades) stepping 04
Booting processor 7/6 eip 2000
Initializing CPU#7
masked ExtINT on CPU#7
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1396.73 BogoMIPS
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU serial number disabled.
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#7.
CPU7: Intel Pentium III (Cascades) stepping 04
Total of 8 processors activated (11153.40 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=-1 pin2=0
...trying to set up timer (IRQ0) through the 8259A ... 
..... (found pin 0) ...works.
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 699.0912 MHz.
..... host bus clock speed is 99.0987 MHz.
checking TSC synchronization across 8 CPUs: passed.
Starting migration thread for cpu 0
Bringing up 1
CPU 1 IS NOW UP!
Starting migration thread for cpu 1
Bringing up 2
CPU 2 IS NOW UP!
Starting migration thread for cpu 2
Bringing up 3
CPU 3 IS NOW UP!
Starting migration thread for cpu 3
Bringing up 4
CPU 4 IS NOW UP!
Starting migration thread for cpu 4
Bringing up 5
CPU 5 IS NOW UP!
Starting migration thread for cpu 5
Bringing up 6
CPU 6 IS NOW UP!
Starting migration thread for cpu 6
Bringing up 7
CPU 7 IS NOW UP!
Starting migration thread for cpu 7
CPUS done 16
zapping low mappings.
mtrr: v2.0 (20020519)
Initializing RT netlink socket
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd26c, last bus=15
PCI: Using configuration type 1