linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-xfs <linux-xfs@vger.kernel.org>,
	 Linux NVDIMM <nvdimm@lists.linux.dev>,
	Linux MM <linux-mm@kvack.org>,
	 linux-fsdevel <linux-fsdevel@vger.kernel.org>,
	"Darrick J. Wong" <djwong@kernel.org>,
	 david <david@fromorbit.com>,
	Christoph Hellwig <hch@infradead.org>,
	Jane Chu <jane.chu@oracle.com>
Subject: Re: [PATCH v8 2/9] dax: Introduce holder for dax_device
Date: Tue, 14 Dec 2021 19:09:38 -0800	[thread overview]
Message-ID: <CAPcyv4gkjhrzNoRqwiWxps_ymAhmm3DJSWL7Lr+bLpSxSPvd0w@mail.gmail.com> (raw)
In-Reply-To: <20211202084856.1285285-3-ruansy.fnst@fujitsu.com>

On Thu, Dec 2, 2021 at 12:49 AM Shiyang Ruan <ruansy.fnst@fujitsu.com> wrote:
>
> To easily track filesystem from a pmem device, we introduce a holder for
> dax_device structure, and also its operation.  This holder is used to
> remember who is using this dax_device:
>  - When it is the backend of a filesystem, the holder will be the
>    superblock of this filesystem.
>  - When this pmem device is one of the targets in a mapped device, the
>    holder will be this mapped device.  In this case, the mapped device
>    has its own dax_device and it will follow the first rule.  So that we
>    can finally track to the filesystem we needed.
>
> The holder and holder_ops will be set when filesystem is being mounted,
> or an target device is being activated.
>
> Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
> ---
>  drivers/dax/super.c | 61 +++++++++++++++++++++++++++++++++++++++++++++
>  include/linux/dax.h | 25 +++++++++++++++++++
>  2 files changed, 86 insertions(+)
>
> diff --git a/drivers/dax/super.c b/drivers/dax/super.c
> index 719e77b2c2d4..a19fcc0a54f3 100644
> --- a/drivers/dax/super.c
> +++ b/drivers/dax/super.c
> @@ -20,15 +20,20 @@
>   * @inode: core vfs
>   * @cdev: optional character interface for "device dax"
>   * @private: dax driver private data
> + * @holder_data: holder of a dax_device: could be filesystem or mapped device
>   * @flags: state and boolean properties
> + * @ops: operations for dax_device
> + * @holder_ops: operations for the inner holder
>   */
>  struct dax_device {
>         struct inode inode;
>         struct cdev cdev;
>         void *private;
>         struct percpu_rw_semaphore rwsem;
> +       void *holder_data;
>         unsigned long flags;
>         const struct dax_operations *ops;
> +       const struct dax_holder_operations *holder_ops;
>  };
>
>  static dev_t dax_devt;
> @@ -190,6 +195,29 @@ int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
>  }
>  EXPORT_SYMBOL_GPL(dax_zero_page_range);
>
> +int dax_holder_notify_failure(struct dax_device *dax_dev, u64 off,
> +                             u64 len, int mf_flags)
> +{
> +       int rc;
> +
> +       dax_read_lock(dax_dev);
> +       if (!dax_alive(dax_dev)) {
> +               rc = -ENXIO;
> +               goto out;
> +       }
> +
> +       if (!dax_dev->holder_ops) {
> +               rc = -EOPNOTSUPP;
> +               goto out;
> +       }
> +
> +       rc = dax_dev->holder_ops->notify_failure(dax_dev, off, len, mf_flags);
> +out:
> +       dax_read_unlock(dax_dev);
> +       return rc;
> +}
> +EXPORT_SYMBOL_GPL(dax_holder_notify_failure);
> +
>  #ifdef CONFIG_ARCH_HAS_PMEM_API
>  void arch_wb_cache_pmem(void *addr, size_t size);
>  void dax_flush(struct dax_device *dax_dev, void *addr, size_t size)
> @@ -252,6 +280,10 @@ void kill_dax(struct dax_device *dax_dev)
>                 return;
>         dax_write_lock(dax_dev);
>         clear_bit(DAXDEV_ALIVE, &dax_dev->flags);
> +
> +       /* clear holder data */
> +       dax_dev->holder_ops = NULL;
> +       dax_dev->holder_data = NULL;
>         dax_write_unlock(dax_dev);
>  }
>  EXPORT_SYMBOL_GPL(kill_dax);
> @@ -399,6 +431,35 @@ void put_dax(struct dax_device *dax_dev)
>  }
>  EXPORT_SYMBOL_GPL(put_dax);
>
> +void dax_set_holder(struct dax_device *dax_dev, void *holder,
> +               const struct dax_holder_operations *ops)
> +{
> +       dax_write_lock(dax_dev);
> +       if (!dax_alive(dax_dev))
> +               goto out;
> +
> +       dax_dev->holder_data = holder;
> +       dax_dev->holder_ops = ops;
> +out:
> +       dax_write_unlock(dax_dev);

Why does this need to be a write_lock()? This is just like any other
dax_operation that can only operate while the dax device is alive.

> +}
> +EXPORT_SYMBOL_GPL(dax_set_holder);
> +
> +void *dax_get_holder(struct dax_device *dax_dev)
> +{
> +       void *holder = NULL;
> +
> +       dax_read_lock(dax_dev);
> +       if (!dax_alive(dax_dev))
> +               goto out;
> +
> +       holder = dax_dev->holder_data;
> +out:
> +       dax_read_unlock(dax_dev);
> +       return holder;

The read_lock should be held outside of this helper. I.e. the caller
of this will already want to do:

dax_read_lock()
dax_get_holder()
*do holder operation*
dax_read_unlock() <-- now device can finalize kill_dax().

> +}
> +EXPORT_SYMBOL_GPL(dax_get_holder);
> +
>  /**
>   * inode_dax: convert a public inode into its dax_dev
>   * @inode: An inode with i_cdev pointing to a dax_dev
> diff --git a/include/linux/dax.h b/include/linux/dax.h
> index 8414a08dcbea..f01684a63447 100644
> --- a/include/linux/dax.h
> +++ b/include/linux/dax.h
> @@ -44,6 +44,21 @@ struct dax_operations {
>  #if IS_ENABLED(CONFIG_DAX)
>  struct dax_device *alloc_dax(void *private, const struct dax_operations *ops,
>                 unsigned long flags);
> +struct dax_holder_operations {
> +       /*
> +        * notify_failure - notify memory failure into inner holder device
> +        * @dax_dev: the dax device which contains the holder
> +        * @offset: offset on this dax device where memory failure occurs
> +        * @len: length of this memory failure event
> +        * @flags: action flags for memory failure handler
> +        */
> +       int (*notify_failure)(struct dax_device *dax_dev, u64 offset,
> +                       u64 len, int mf_flags);
> +};
> +
> +void dax_set_holder(struct dax_device *dax_dev, void *holder,
> +               const struct dax_holder_operations *ops);
> +void *dax_get_holder(struct dax_device *dax_dev);
>  void put_dax(struct dax_device *dax_dev);
>  void kill_dax(struct dax_device *dax_dev);
>  void dax_write_cache(struct dax_device *dax_dev, bool wc);
> @@ -71,6 +86,14 @@ static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
>         return dax_synchronous(dax_dev);
>  }
>  #else
> +static inline void dax_set_holder(struct dax_device *dax_dev, void *holder,
> +               const struct dax_holder_operations *ops)
> +{
> +}
> +static inline void *dax_get_holder(struct dax_device *dax_dev)
> +{
> +       return NULL;
> +}
>  static inline struct dax_device *alloc_dax(void *private,
>                 const struct dax_operations *ops, unsigned long flags)
>  {
> @@ -199,6 +222,8 @@ size_t dax_copy_to_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
>                 size_t bytes, struct iov_iter *i);
>  int dax_zero_page_range(struct dax_device *dax_dev, pgoff_t pgoff,
>                         size_t nr_pages);
> +int dax_holder_notify_failure(struct dax_device *dax_dev, u64 off, u64 len,
> +               int mf_flags);
>  void dax_flush(struct dax_device *dax_dev, void *addr, size_t size);
>
>  ssize_t dax_iomap_rw(struct kiocb *iocb, struct iov_iter *iter,
> --
> 2.34.0
>
>
>


  reply	other threads:[~2021-12-15  3:10 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-02  8:48 [RESEND PATCH v8 0/9] fsdax: introduce fs query to support reflink Shiyang Ruan
2021-12-02  8:48 ` [PATCH v8 1/9] dax: Use percpu rwsem for dax_{read,write}_lock() Shiyang Ruan
2021-12-14 15:40   ` Christoph Hellwig
2021-12-15  2:06     ` Shiyang Ruan
2021-12-16  7:46       ` Christoph Hellwig
2021-12-02  8:48 ` [PATCH v8 2/9] dax: Introduce holder for dax_device Shiyang Ruan
2021-12-15  3:09   ` Dan Williams [this message]
2021-12-02  8:48 ` [PATCH v8 3/9] mm: factor helpers for memory_failure_dev_pagemap Shiyang Ruan
2021-12-02  8:48 ` [PATCH v8 4/9] pagemap,pmem: Introduce ->memory_failure() Shiyang Ruan
2021-12-02  8:48 ` [PATCH v8 5/9] fsdax: Introduce dax_lock_mapping_entry() Shiyang Ruan
2021-12-14 15:42   ` Christoph Hellwig
2021-12-02  8:48 ` [PATCH v8 6/9] mm: Introduce mf_dax_kill_procs() for fsdax case Shiyang Ruan
2021-12-14 15:47   ` Christoph Hellwig
2021-12-02  8:48 ` [PATCH v8 7/9] dax: add dax holder helper for filesystems Shiyang Ruan
2021-12-14 15:47   ` Christoph Hellwig
2021-12-15  2:21     ` Shiyang Ruan
2021-12-16  7:46       ` Christoph Hellwig
2021-12-02  8:48 ` [PATCH v8 8/9] xfs: Implement ->notify_failure() for XFS Shiyang Ruan
2021-12-14 15:54   ` Christoph Hellwig
2021-12-14 16:01   ` Darrick J. Wong
2021-12-02  8:48 ` [PATCH v8 9/9] fsdax: set a CoW flag when associate reflink mappings Shiyang Ruan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAPcyv4gkjhrzNoRqwiWxps_ymAhmm3DJSWL7Lr+bLpSxSPvd0w@mail.gmail.com \
    --to=dan.j.williams@intel.com \
    --cc=david@fromorbit.com \
    --cc=djwong@kernel.org \
    --cc=hch@infradead.org \
    --cc=jane.chu@oracle.com \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-xfs@vger.kernel.org \
    --cc=nvdimm@lists.linux.dev \
    --cc=ruansy.fnst@fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox