linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Vitaly Wool <vitaly.wool@konsulko.com>
To: Liu Shixin <liushixin2@huawei.com>
Cc: Seth Jennings <sjenning@redhat.com>,
	Dan Streetman <ddstreet@ieee.org>,
	 Andrew Morton <akpm@linux-foundation.org>,
	Nathan Chancellor <nathan@kernel.org>,
	 Christoph Hellwig <hch@lst.de>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	 Kefeng Wang <wangkefeng.wang@huawei.com>
Subject: Re: [PATCH -next v3 2/5] frontswap: invoke ops->init for online swap device in frontswap_register_ops
Date: Sun, 28 Aug 2022 22:47:25 +0200	[thread overview]
Message-ID: <CAM4kBB+-f+TF4=q5SdxHiKPdtAO7KWDGac9vNQb9rR0rUUjYrA@mail.gmail.com> (raw)
In-Reply-To: <20220827104600.1813214-3-liushixin2@huawei.com>

On Sat, Aug 27, 2022 at 12:12 PM Liu Shixin <liushixin2@huawei.com> wrote:
>
> Since we are supported to delay zswap initializaton, we need to invoke
> ops->init for the swap device which is already online when register
> backend.
>
> This patch is a revert of f328c1d16e4c ("frontswap: simplify frontswap_register_ops")
> and 633423a09cb5 ("mm: mark swap_lock and swap_active_head static")
>
> Signed-off-by: Liu Shixin <liushixin2@huawei.com>

Sorry, is this the revert of 2 patches at the same time? I would
rather not do it like that.

Thanks,
Vitaly

> ---
>  include/linux/swapfile.h |  2 ++
>  mm/frontswap.c           | 47 ++++++++++++++++++++++++++++++++++++++++
>  mm/swapfile.c            |  4 ++--
>  3 files changed, 51 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/swapfile.h b/include/linux/swapfile.h
> index 2fbcc9afd814..75fc069594a5 100644
> --- a/include/linux/swapfile.h
> +++ b/include/linux/swapfile.h
> @@ -6,6 +6,8 @@
>   * these were static in swapfile.c but frontswap.c needs them and we don't
>   * want to expose them to the dozens of source files that include swap.h
>   */
> +extern spinlock_t swap_lock;
> +extern struct plist_head swap_active_head;
>  extern struct swap_info_struct *swap_info[];
>  extern unsigned long generic_max_swapfile_size(void);
>  /* Maximum swapfile size supported for the arch (not inclusive). */
> diff --git a/mm/frontswap.c b/mm/frontswap.c
> index 620f95af81dd..449e6f499b88 100644
> --- a/mm/frontswap.c
> +++ b/mm/frontswap.c
> @@ -96,11 +96,58 @@ static inline void inc_frontswap_invalidates(void) { }
>   */
>  int frontswap_register_ops(const struct frontswap_ops *ops)
>  {
> +       DECLARE_BITMAP(a, MAX_SWAPFILES);
> +       DECLARE_BITMAP(b, MAX_SWAPFILES);
> +       struct swap_info_struct *si;
> +       unsigned int i;
> +
>         if (frontswap_ops)
>                 return -EINVAL;
>
> +       bitmap_zero(a, MAX_SWAPFILES);
> +       bitmap_zero(b, MAX_SWAPFILES);
> +
> +       spin_lock(&swap_lock);
> +       plist_for_each_entry(si, &swap_active_head, list) {
> +               if (!WARN_ON(!si->frontswap_map))
> +                       __set_bit(si->type, a);
> +       }
> +       spin_unlock(&swap_lock);
> +
> +       /* the new ops needs to know the currently active swap devices */
> +       for_each_set_bit(i, a, MAX_SWAPFILES) {
> +               pr_err("init frontswap_ops\n");
> +               ops->init(i);
> +       }
> +
>         frontswap_ops = ops;
>         static_branch_inc(&frontswap_enabled_key);
> +
> +       spin_lock(&swap_lock);
> +       plist_for_each_entry(si, &swap_active_head, list) {
> +               if (si->frontswap_map)
> +                       __set_bit(si->type, b);
> +       }
> +       spin_unlock(&swap_lock);
> +
> +       /*
> +        * On the very unlikely chance that a swap device was added or
> +        * removed between setting the "a" list bits and the ops init
> +        * calls, we re-check and do init or invalidate for any changed
> +        * bits.
> +        */
> +       if (unlikely(!bitmap_equal(a, b, MAX_SWAPFILES))) {
> +               for (i = 0; i < MAX_SWAPFILES; i++) {
> +                       if (!test_bit(i, a) && test_bit(i, b)) {
> +                               pr_err("init frontswap_ops re\n");
> +                               ops->init(i);
> +                       } else if (test_bit(i, a) && !test_bit(i, b)) {
> +                               pr_err("inval frontswap_ops re\n");
> +                               ops->invalidate_area(i);
> +                       }
> +               }
> +       }
> +
>         return 0;
>  }
>
> diff --git a/mm/swapfile.c b/mm/swapfile.c
> index 469d9af86be2..d383b282f269 100644
> --- a/mm/swapfile.c
> +++ b/mm/swapfile.c
> @@ -51,7 +51,7 @@ static bool swap_count_continued(struct swap_info_struct *, pgoff_t,
>                                  unsigned char);
>  static void free_swap_count_continuations(struct swap_info_struct *);
>
> -static DEFINE_SPINLOCK(swap_lock);
> +DEFINE_SPINLOCK(swap_lock);
>  static unsigned int nr_swapfiles;
>  atomic_long_t nr_swap_pages;
>  /*
> @@ -77,7 +77,7 @@ static const char Unused_offset[] = "Unused swap offset entry ";
>   * all active swap_info_structs
>   * protected with swap_lock, and ordered by priority.
>   */
> -static PLIST_HEAD(swap_active_head);
> +PLIST_HEAD(swap_active_head);
>
>  /*
>   * all available (active, not full) swap_info_structs
> --
> 2.25.1
>


  reply	other threads:[~2022-08-28 20:47 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-27 10:45 [PATCH -next v3 0/5] Delay the initializaton of zswap Liu Shixin
2022-08-27 10:45 ` [PATCH -next v3 1/5] frontswap: skip frontswap_ops init if zswap init failed Liu Shixin
2022-08-28 20:44   ` Vitaly Wool
2022-08-29  2:10     ` Liu Shixin
2022-08-29  6:11       ` Vitaly Wool
2022-08-27 10:45 ` [PATCH -next v3 2/5] frontswap: invoke ops->init for online swap device in frontswap_register_ops Liu Shixin
2022-08-28 20:47   ` Vitaly Wool [this message]
2022-08-29  2:12     ` Liu Shixin
2022-08-27 10:45 ` [PATCH -next v3 3/5] mm/zswap: replace zswap_init_{started/failed} with zswap_init_state Liu Shixin
2022-08-28 20:46   ` Vitaly Wool
2022-08-27 10:45 ` [PATCH -next v3 4/5] mm/zswap: delay the initializaton of zswap until the first enablement Liu Shixin
2022-08-28 20:45   ` Vitaly Wool
2022-08-27 10:46 ` [PATCH -next v3 5/5] mm/zswap: skip confusing print info Liu Shixin
2022-08-27 22:13 ` [PATCH -next v3 0/5] Delay the initializaton of zswap Andrew Morton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAM4kBB+-f+TF4=q5SdxHiKPdtAO7KWDGac9vNQb9rR0rUUjYrA@mail.gmail.com' \
    --to=vitaly.wool@konsulko.com \
    --cc=akpm@linux-foundation.org \
    --cc=ddstreet@ieee.org \
    --cc=hch@lst.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=liushixin2@huawei.com \
    --cc=nathan@kernel.org \
    --cc=sjenning@redhat.com \
    --cc=wangkefeng.wang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox