From: Leon Romanovsky <leon@leon.nu>
To: Jeff Layton <jlayton@poochiereds.net>
Cc: trond.myklebust@primarydata.com, davem@davemloft.net,
netdev@vger.kernel.org, linux-nfs@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Mel Gorman <mgorman@suse.de>, Linux-MM <linux-mm@kvack.org>
Subject: Re: [PATCH] net, swap: Remove a warning and clarify why sk_mem_reclaim is required when deactivating swap
Date: Wed, 10 Jun 2015 11:12:14 +0300 [thread overview]
Message-ID: <CALq1K=J2JHswhYX+z4RX-fm75JqXeR8Yq8sMzeDqCjSoRN0oEw@mail.gmail.com> (raw)
In-Reply-To: <1433875204-18060-1-git-send-email-jeff.layton@primarydata.com>
On Tue, Jun 9, 2015 at 9:40 PM, Jeff Layton <jlayton@poochiereds.net> wrote:
> From: Mel Gorman <mgorman@suse.de>
>
> Jeff Layton reported the following;
>
> [ 74.232485] ------------[ cut here ]------------
> [ 74.233354] WARNING: CPU: 2 PID: 754 at net/core/sock.c:364 sk_clear_memalloc+0x51/0x80()
> [ 74.234790] Modules linked in: cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xfs libcrc32c snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device nfsd snd_pcm snd_timer snd e1000 ppdev parport_pc joydev parport pvpanic soundcore floppy serio_raw i2c_piix4 pcspkr nfs_acl lockd virtio_balloon acpi_cpufreq auth_rpcgss grace sunrpc qxl drm_kms_helper ttm drm virtio_console virtio_blk virtio_pci ata_generic virtio_ring pata_acpi virtio
> [ 74.243599] CPU: 2 PID: 754 Comm: swapoff Not tainted 4.1.0-rc6+ #5
> [ 74.244635] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
> [ 74.245546] 0000000000000000 0000000079e69e31 ffff8800d066bde8 ffffffff8179263d
> [ 74.246786] 0000000000000000 0000000000000000 ffff8800d066be28 ffffffff8109e6fa
> [ 74.248175] 0000000000000000 ffff880118d48000 ffff8800d58f5c08 ffff880036e380a8
> [ 74.249483] Call Trace:
> [ 74.249872] [<ffffffff8179263d>] dump_stack+0x45/0x57
> [ 74.250703] [<ffffffff8109e6fa>] warn_slowpath_common+0x8a/0xc0
> [ 74.251655] [<ffffffff8109e82a>] warn_slowpath_null+0x1a/0x20
> [ 74.252585] [<ffffffff81661241>] sk_clear_memalloc+0x51/0x80
> [ 74.253519] [<ffffffffa0116c72>] xs_disable_swap+0x42/0x80 [sunrpc]
> [ 74.254537] [<ffffffffa01109de>] rpc_clnt_swap_deactivate+0x7e/0xc0 [sunrpc]
> [ 74.255610] [<ffffffffa03e4fd7>] nfs_swap_deactivate+0x27/0x30 [nfs]
> [ 74.256582] [<ffffffff811e99d4>] destroy_swap_extents+0x74/0x80
> [ 74.257496] [<ffffffff811ecb52>] SyS_swapoff+0x222/0x5c0
> [ 74.258318] [<ffffffff81023f27>] ? syscall_trace_leave+0xc7/0x140
> [ 74.259253] [<ffffffff81798dae>] system_call_fastpath+0x12/0x71
> [ 74.260158] ---[ end trace 2530722966429f10 ]---
>
> The warning in question was unnecessary but with Jeff's series the rules
> are also clearer. This patch removes the warning and updates the comment
> to explain why sk_mem_reclaim() may still be called.
>
> Signed-off-by: Mel Gorman <mgorman@suse.de>
> Acked-by: Jeff Layton <jeff.layton@primarydata.com>
> ---
> net/core/sock.c | 12 +++++-------
> 1 file changed, 5 insertions(+), 7 deletions(-)
>
> diff --git a/net/core/sock.c b/net/core/sock.c
> index 292f42228bfb..2bb4c56370e5 100644
> --- a/net/core/sock.c
> +++ b/net/core/sock.c
> @@ -354,14 +354,12 @@ void sk_clear_memalloc(struct sock *sk)
>
> /*
> * SOCK_MEMALLOC is allowed to ignore rmem limits to ensure forward
> - * progress of swapping. However, if SOCK_MEMALLOC is cleared while
> - * it has rmem allocations there is a risk that the user of the
> - * socket cannot make forward progress due to exceeding the rmem
> - * limits. By rights, sk_clear_memalloc() should only be called
> - * on sockets being torn down but warn and reset the accounting if
> - * that assumption breaks.
> + * progress of swapping. SOCK_MEMALLOC may be cleared while
> + * it has rmem allocations due to the last swapfile being deactivated
> + * but there is a risk that the socket is unusable due to exceeding
> + * the rmem limits. Reclaim the reserves and obey rmem limits again.
> */
> - if (WARN_ON(sk->sk_forward_alloc))
> + if (sk->sk_forward_alloc)
You don't really need this IF. if sk->sk_forward_alloc is equal to
zero, it will be less than SK_MEM_QUANTUM.
http://lxr.free-electrons.com/source/include/net/sock.h#L1405
1405 static inline void sk_mem_reclaim(struct sock *sk)
1406 {
1407 if (!sk_has_account(sk))
1408 return;
1409 if (sk->sk_forward_alloc >= SK_MEM_QUANTUM)
1410 __sk_mem_reclaim(sk);
1411 }
> sk_mem_reclaim(sk);
> }
> EXPORT_SYMBOL_GPL(sk_clear_memalloc);
> --
> 2.4.2
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
Leon Romanovsky | Independent Linux Consultant
www.leon.nu | leon@leon.nu
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-06-10 8:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 18:40 Jeff Layton
2015-06-10 8:12 ` Leon Romanovsky [this message]
2015-06-11 1:02 ` [PATCH v2] " Jeff Layton
2015-06-11 6:02 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CALq1K=J2JHswhYX+z4RX-fm75JqXeR8Yq8sMzeDqCjSoRN0oEw@mail.gmail.com' \
--to=leon@leon.nu \
--cc=davem@davemloft.net \
--cc=jlayton@poochiereds.net \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nfs@vger.kernel.org \
--cc=mgorman@suse.de \
--cc=netdev@vger.kernel.org \
--cc=trond.myklebust@primarydata.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox