From: Yafang Shao <laoar.shao@gmail.com>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Michal Hocko <mhocko@suse.com>,
minchan@kernel.org, Johannes Weiner <hannes@cmpxchg.org>,
Linux MM <linux-mm@kvack.org>
Subject: Re: [PATCH] mm: account lazily freed anon pages in NR_FILE_PAGES
Date: Fri, 6 Nov 2020 09:57:29 +0800 [thread overview]
Message-ID: <CALOAHbC4Zc3i8y4HP+hAyKcZfrm0JrOWOWqk29VYXCzQu8sw7A@mail.gmail.com> (raw)
In-Reply-To: <4c0a7ea6-4817-2dae-7473-8d0fe6110a45@suse.cz>
On Thu, Nov 5, 2020 at 11:18 PM Vlastimil Babka <vbabka@suse.cz> wrote:
>
> On 11/5/20 2:10 PM, Yafang Shao wrote:
> > The memory utilization (Used / Total) is used to monitor the memory
> > pressure by us. If it is too high, it means the system may be OOM sooner
> > or later when swap is off, then we will make adjustment on this system.
>
> Hmm I would say that any system looking just at memory utilization (Used /
> Total) and not looking at file lru size is flawed.
> There's a reason MemAvailable exists, and does count file lru sizes.
>
Right, the file lru size is counted in MemAvailable. MemAvailable and
Used are two different metrics used by us. Both of them are useful,
but the Used is not reliable anymore...
> > However, this method is broken since MADV_FREE is introduced, because
> > these lazily free anonymous can be reclaimed under memory pressure while
> > they are still accounted in NR_ANON_MAPPED.
> >
> > Furthermore, since commit f7ad2a6cb9f7 ("mm: move MADV_FREE pages into
> > LRU_INACTIVE_FILE list"), these lazily free anonymous pages are moved
> > from anon lru list into file lru list. That means
> > (Inactive(file) + Active(file)) may be much larger than Cached in
> > /proc/meminfo. That makes our users confused.
>
> Yeah the counters are tricky for multiple reasons as Michal said...
>
> > So we'd better account the lazily freed anonoymous pages in
> > NR_FILE_PAGES as well.
> >
> > Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
> > Cc: Minchan Kim <minchan@kernel.org>
> > Cc: Johannes Weiner <hannes@cmpxchg.org>
> > Cc: Michal Hocko <mhocko@suse.com>
> > ---
> > mm/memcontrol.c | 11 +++++++++--
> > mm/rmap.c | 26 ++++++++++++++++++--------
> > mm/swap.c | 2 ++
> > mm/vmscan.c | 2 ++
> > 4 files changed, 31 insertions(+), 10 deletions(-)
> >
> > diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> > index 3dcbf24d2227..217a6f10fa8d 100644
> > --- a/mm/memcontrol.c
> > +++ b/mm/memcontrol.c
> > @@ -5659,8 +5659,15 @@ static int mem_cgroup_move_account(struct page *page,
> >
> > if (PageAnon(page)) {
> > if (page_mapped(page)) {
> > - __mod_lruvec_state(from_vec, NR_ANON_MAPPED, -nr_pages);
> > - __mod_lruvec_state(to_vec, NR_ANON_MAPPED, nr_pages);
> > + if (!PageSwapBacked(page) && !PageSwapCache(page) &&
> > + !PageUnevictable(page)) {
> > + __mod_lruvec_state(from_vec, NR_FILE_PAGES, -nr_pages);
> > + __mod_lruvec_state(to_vec, NR_FILE_PAGES, nr_pages);
> > + } else {
> > + __mod_lruvec_state(from_vec, NR_ANON_MAPPED, -nr_pages);
> > + __mod_lruvec_state(to_vec, NR_ANON_MAPPED, nr_pages);
> > + }
> > +
> > if (PageTransHuge(page)) {
> > __mod_lruvec_state(from_vec, NR_ANON_THPS,
> > -nr_pages);
> > diff --git a/mm/rmap.c b/mm/rmap.c
> > index 1b84945d655c..690ca7ff2392 100644
> > --- a/mm/rmap.c
> > +++ b/mm/rmap.c
> > @@ -1312,8 +1312,13 @@ static void page_remove_anon_compound_rmap(struct page *page)
> > if (unlikely(PageMlocked(page)))
> > clear_page_mlock(page);
> >
> > - if (nr)
> > - __mod_lruvec_page_state(page, NR_ANON_MAPPED, -nr);
> > + if (nr) {
> > + if (PageLRU(page) && PageAnon(page) && !PageSwapBacked(page) &&
> > + !PageSwapCache(page) && !PageUnevictable(page))
> > + __mod_lruvec_page_state(page, NR_FILE_PAGES, -nr);
> > + else
> > + __mod_lruvec_page_state(page, NR_ANON_MAPPED, -nr);
> > + }
> > }
> >
> > /**
> > @@ -1341,12 +1346,17 @@ void page_remove_rmap(struct page *page, bool compound)
> > if (!atomic_add_negative(-1, &page->_mapcount))
> > goto out;
> >
> > - /*
> > - * We use the irq-unsafe __{inc|mod}_zone_page_stat because
> > - * these counters are not modified in interrupt context, and
> > - * pte lock(a spinlock) is held, which implies preemption disabled.
> > - */
> > - __dec_lruvec_page_state(page, NR_ANON_MAPPED);
> > + if (PageLRU(page) && PageAnon(page) && !PageSwapBacked(page) &&
> > + !PageSwapCache(page) && !PageUnevictable(page)) {
> > + __dec_lruvec_page_state(page, NR_FILE_PAGES);
> > + } else {
> > + /*
> > + * We use the irq-unsafe __{inc|mod}_zone_page_stat because
> > + * these counters are not modified in interrupt context, and
> > + * pte lock(a spinlock) is held, which implies preemption disabled.
> > + */
> > + __dec_lruvec_page_state(page, NR_ANON_MAPPED);
> > + }
> >
> > if (unlikely(PageMlocked(page)))
> > clear_page_mlock(page);
> > diff --git a/mm/swap.c b/mm/swap.c
> > index 47a47681c86b..340c5276a0f3 100644
> > --- a/mm/swap.c
> > +++ b/mm/swap.c
> > @@ -601,6 +601,7 @@ static void lru_lazyfree_fn(struct page *page, struct lruvec *lruvec,
> >
> > del_page_from_lru_list(page, lruvec,
> > LRU_INACTIVE_ANON + active);
> > + __mod_lruvec_state(lruvec, NR_ANON_MAPPED, -nr_pages);
> > ClearPageActive(page);
> > ClearPageReferenced(page);
> > /*
> > @@ -610,6 +611,7 @@ static void lru_lazyfree_fn(struct page *page, struct lruvec *lruvec,
> > */
> > ClearPageSwapBacked(page);
> > add_page_to_lru_list(page, lruvec, LRU_INACTIVE_FILE);
> > + __mod_lruvec_state(lruvec, NR_FILE_PAGES, nr_pages);
> >
> > __count_vm_events(PGLAZYFREE, nr_pages);
> > __count_memcg_events(lruvec_memcg(lruvec), PGLAZYFREE,
> > diff --git a/mm/vmscan.c b/mm/vmscan.c
> > index 1b8f0e059767..4821124c70f7 100644
> > --- a/mm/vmscan.c
> > +++ b/mm/vmscan.c
> > @@ -1428,6 +1428,8 @@ static unsigned int shrink_page_list(struct list_head *page_list,
> > goto keep_locked;
> > }
> >
> > + mod_lruvec_page_state(page, NR_ANON_MAPPED, nr_pages);
> > + mod_lruvec_page_state(page, NR_FILE_PAGES, -nr_pages);
> > count_vm_event(PGLAZYFREED);
> > count_memcg_page_event(page, PGLAZYFREED);
> > } else if (!mapping || !__remove_mapping(mapping, page, true,
> >
>
--
Thanks
Yafang
next prev parent reply other threads:[~2020-11-06 1:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-05 13:10 Yafang Shao
2020-11-05 13:35 ` Michal Hocko
2020-11-05 14:16 ` Yafang Shao
2020-11-05 15:22 ` Michal Hocko
2020-11-05 17:47 ` Michal Hocko
2020-11-05 15:18 ` Vlastimil Babka
2020-11-06 1:57 ` Yafang Shao [this message]
2020-11-05 16:22 ` Johannes Weiner
2020-11-06 2:09 ` Yafang Shao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CALOAHbC4Zc3i8y4HP+hAyKcZfrm0JrOWOWqk29VYXCzQu8sw7A@mail.gmail.com \
--to=laoar.shao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=hannes@cmpxchg.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=minchan@kernel.org \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox