linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Suren Baghdasaryan <surenb@google.com>
To: Peter Xu <peterx@redhat.com>
Cc: David Hildenbrand <david@redhat.com>,
	akpm@linux-foundation.org, aarcange@redhat.com,
	 lokeshgidra@google.com, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org,
	 syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com,
	stable@vger.kernel.org
Subject: Re: [PATCH v2 1/1] userfaultfd: fix a crash when UFFDIO_MOVE handles a THP hole
Date: Fri, 1 Aug 2025 17:45:10 +0000	[thread overview]
Message-ID: <CAJuCfpFJGaDaFyNLa3JsVh19NWLGNGo1ebC_ijGTgPGNyfUFig@mail.gmail.com> (raw)
In-Reply-To: <aIz1xrzBc2Spa2OH@x1.local>

On Fri, Aug 1, 2025 at 5:13 PM Peter Xu <peterx@redhat.com> wrote:
>
> On Fri, Aug 01, 2025 at 09:41:31AM -0700, Suren Baghdasaryan wrote:
> > On Fri, Aug 1, 2025 at 9:23 AM Peter Xu <peterx@redhat.com> wrote:
> > >
> > > On Fri, Aug 01, 2025 at 08:28:38AM -0700, Suren Baghdasaryan wrote:
> > > > On Fri, Aug 1, 2025 at 7:16 AM Peter Xu <peterx@redhat.com> wrote:
> > > > >
> > > > > On Fri, Aug 01, 2025 at 09:21:30AM +0200, David Hildenbrand wrote:
> > > > > > On 31.07.25 17:44, Suren Baghdasaryan wrote:
> > > > > >
> > > > > > Hi!
> > > > > >
> > > > > > Did you mean in you patch description:
> > > > > >
> > > > > > "userfaultfd: fix a crash in UFFDIO_MOVE with some non-present PMDs"
> > > > > >
> > > > > > Talking about THP holes is very very confusing.
> > > > > >
> > > > > > > When UFFDIO_MOVE is used with UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES and it
> > > > > > > encounters a non-present THP, it fails to properly recognize an unmapped
> > > > > >
> > > > > > You mean a "non-present PMD that is not a migration entry".
> > > > > >
> > > > > > > hole and tries to access a non-existent folio, resulting in
> > > > > > > a crash. Add a check to skip non-present THPs.
> > > > > >
> > > > > > That makes sense. The code we have after this patch is rather complicated
> > > > > > and hard to read.
> > > > > >
> > > > > > >
> > > > > > > Fixes: adef440691ba ("userfaultfd: UFFDIO_MOVE uABI")
> > > > > > > Reported-by: syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com
> > > > > > > Closes: https://lore.kernel.org/all/68794b5c.a70a0220.693ce.0050.GAE@google.com/
> > > > > > > Signed-off-by: Suren Baghdasaryan <surenb@google.com>
> > > > > > > Cc: stable@vger.kernel.org
> > > > > > > ---
> > > > > > > Changes since v1 [1]
> > > > > > > - Fixed step size calculation, per Lokesh Gidra
> > > > > > > - Added missing check for UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES, per Lokesh Gidra
> > > > > > >
> > > > > > > [1] https://lore.kernel.org/all/20250730170733.3829267-1-surenb@google.com/
> > > > > > >
> > > > > > >   mm/userfaultfd.c | 45 +++++++++++++++++++++++++++++----------------
> > > > > > >   1 file changed, 29 insertions(+), 16 deletions(-)
> > > > > > >
> > > > > > > diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
> > > > > > > index cbed91b09640..b5af31c22731 100644
> > > > > > > --- a/mm/userfaultfd.c
> > > > > > > +++ b/mm/userfaultfd.c
> > > > > > > @@ -1818,28 +1818,41 @@ ssize_t move_pages(struct userfaultfd_ctx *ctx, unsigned long dst_start,
> > > > > > >             ptl = pmd_trans_huge_lock(src_pmd, src_vma);
> > > > > > >             if (ptl) {
> > > > > > > -                   /* Check if we can move the pmd without splitting it. */
> > > > > > > -                   if (move_splits_huge_pmd(dst_addr, src_addr, src_start + len) ||
> > > > > > > -                       !pmd_none(dst_pmdval)) {
> > > > > > > -                           struct folio *folio = pmd_folio(*src_pmd);
> > > > > > > +                   if (pmd_present(*src_pmd) || is_pmd_migration_entry(*src_pmd)) {
> > > > >
> > > > > [1]
> > > > >
> > > > > > > +                           /* Check if we can move the pmd without splitting it. */
> > > > > > > +                           if (move_splits_huge_pmd(dst_addr, src_addr, src_start + len) ||
> > > > > > > +                               !pmd_none(dst_pmdval)) {
> > > > > > > +                                   if (pmd_present(*src_pmd)) {
> > >
> > > [2]
> > >
> > > > > > > +                                           struct folio *folio = pmd_folio(*src_pmd);
> > >
> > > [3]
> > >
> > > > > > > +
> > > > > > > +                                           if (!folio || (!is_huge_zero_folio(folio) &&
> > > > > > > +                                                          !PageAnonExclusive(&folio->page))) {
> > > > > > > +                                                   spin_unlock(ptl);
> > > > > > > +                                                   err = -EBUSY;
> > > > > > > +                                                   break;
> > > > > > > +                                           }
> > > > > > > +                                   }
> > > > > >
> > > > > > ... in particular that. Is there some way to make this code simpler / easier
> > > > > > to read? Like moving that whole last folio-check thingy into a helper?
> > > > >
> > > > > One question might be relevant is, whether the check above [1] can be
> > > > > dropped.
> > > > >
> > > > > The thing is __pmd_trans_huge_lock() does double check the pmd to be !none
> > > > > before returning the ptl.  I didn't follow closely on the recent changes on
> > > > > mm side on possible new pmd swap entries, if migration is the only possible
> > > > > one then it looks like [1] can be avoided.
> > > >
> > > > Hi Peter,
> > > > is_swap_pmd() check in __pmd_trans_huge_lock() allows for (!pmd_none()
> > > > && !pmd_present()) PMD to pass and that's when this crash is hit.
> > >
> > > First for all, thanks for looking into the issue with Lokesh; I am still
> > > catching up with emails after taking weeks off.
> > >
> > > I didn't yet read into the syzbot report, but I thought the bug was about
> > > referencing the folio on top of a swap entry after reading your current
> > > patch, which has:
> > >
> > >         if (move_splits_huge_pmd(dst_addr, src_addr, src_start + len) ||
> > >             !pmd_none(dst_pmdval)) {
> > >                 struct folio *folio = pmd_folio(*src_pmd); <----
> > >
> > > Here looks like *src_pmd can be a migration entry. Is my understanding
> > > correct?
> >
> > Correct.
> >
> > >
> > > > If we drop the check at [1] then the path that takes us to
> > >
> > > If my above understanding is correct, IMHO it should be [2] above that
> > > makes sure the reference won't happen on a swap entry, not necessarily [1]?
> >
> > Yes, in case of migration entry this is what protects us.
> >
> > >
> > > > split_huge_pmd() will bail out inside split_huge_pmd_locked() with no
> > > > indication that split did not happen. Afterwards we will retry
> > >
> > > So we're talking about the case where it's a swap pmd entry, right?
> >
> > Hmm, my understanding is that it's being treated as a swap entry but
> > in reality is not. I thought THPs are always split before they get
> > swapped, no?
>
> Yes they should be split, afaiu.
>
> >
> > > Could you elaborate why the split would fail?
> >
> > Just looking at the code, split_huge_pmd_locked() checks for
> > (pmd_trans_huge(*pmd) || is_pmd_migration_entry(*pmd)).
> > pmd_trans_huge() is false if !pmd_present() and it's not a migration
> > entry, so __split_huge_pmd_locked() will be skipped.
>
> Here might be the major part of where confusion came from: I thought it
> must be a migration pmd entry to hit the issue, so it's not?
>
> I checked the code just now:
>
> __handle_mm_fault:
>                 if (unlikely(is_swap_pmd(vmf.orig_pmd))) {
>                         VM_BUG_ON(thp_migration_supported() &&
>                                           !is_pmd_migration_entry(vmf.orig_pmd));
>
> So IIUC pmd migration entry is still the only possible way to have a swap
> entry.  It doesn't look like we have "real" swap entries for PMD (which can
> further points to some swapfiles)?

Correct. AFAIU here we stumble on a pmd entry which was allocated but
never populated.

>
> --
> Peter Xu
>


  reply	other threads:[~2025-08-01 17:45 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-31 15:44 Suren Baghdasaryan
2025-07-31 17:30 ` Lokesh Gidra
2025-08-01  7:21 ` David Hildenbrand
2025-08-01 14:15   ` Peter Xu
2025-08-01 15:28     ` Suren Baghdasaryan
2025-08-01 16:23       ` Peter Xu
2025-08-01 16:41         ` Suren Baghdasaryan
2025-08-01 17:13           ` Peter Xu
2025-08-01 17:45             ` Suren Baghdasaryan [this message]
2025-08-01 18:20               ` Peter Xu
2025-08-01 19:30                 ` Suren Baghdasaryan
2025-08-02  0:32                   ` Peter Xu
2025-08-04 14:55                     ` Suren Baghdasaryan
2025-08-05 14:39                       ` Peter Xu
2025-08-05 14:57                         ` Suren Baghdasaryan
2025-08-05 20:39                           ` Suren Baghdasaryan
2025-08-05 23:41                             ` Suren Baghdasaryan
2025-08-06  0:40                               ` Peter Xu
2025-08-06 15:06                                 ` Suren Baghdasaryan
2025-08-06 15:46                                   ` Suren Baghdasaryan
2025-08-01 15:11   ` Suren Baghdasaryan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CAJuCfpFJGaDaFyNLa3JsVh19NWLGNGo1ebC_ijGTgPGNyfUFig@mail.gmail.com \
    --to=surenb@google.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lokeshgidra@google.com \
    --cc=peterx@redhat.com \
    --cc=stable@vger.kernel.org \
    --cc=syzbot+b446dbe27035ef6bd6c2@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox