From: Hillf Danton <dhillf@gmail.com>
To: Peter Zijlstra <peterz@infradead.org>,
LKML <linux-kernel@vger.kernel.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
tglx@linutronix.de, akpm@linux-foundation.org, riel@redhat.com,
mgorman@suse.de, oleg@redhat.com, mingo@redhat.com,
minchan@kernel.org, kamezawa.hiroyu@jp.fujitsu.com,
viro@zeniv.linux.org.uk, linux-mm@kvack.org
Cc: "hillf.zj" <hillf.zj@alibaba-inc.com>
Subject: Re: [RFC][PATCH 5/6] mm: Provide speculative fault infrastructure
Date: Tue, 21 Oct 2014 17:07:56 +0800 [thread overview]
Message-ID: <CAJd=RBAF3BS9GvPW+fNB9DNzyHrBZk4qNfU6QKUhNNKTMYkmNQ@mail.gmail.com> (raw)
Hey Peter
> Date: Mon, 20 Oct 2014 23:56:38 +0200
> From: Peter Zijlstra <peterz@infradead.org>
> To: torvalds@linux-foundation.org, paulmck@linux.vnet.ibm.com,
> tglx@linutronix.de, akpm@linux-foundation.org, riel@redhat.com,
> mgorman@suse.de, oleg@redhat.com, mingo@redhat.com, minchan@kernel.org,
> kamezawa.hiroyu@jp.fujitsu.com, viro@zeniv.linux.org.uk, la
> Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org, "Peter Zijlstra"
> <peterz@infradead.org>
> Subject: [RFC][PATCH 5/6] mm: Provide speculative fault infrastructure
>
> Provide infrastructure to do a speculative fault (not holding
> mmap_sem).
>
> The not holding of mmap_sem means we can race against VMA
> change/removal and page-table destruction. We use the SRCU VMA freeing
> to keep the VMA around. We use the VMA seqcount to detect change
> (including umapping / page-table deletion) and we use gup_fast() style
> page-table walking to deal with page-table races.
>
> Once we've obtained the page and are ready to update the PTE, we
> validate if the state we started the fault with is still valid, if
> not, we'll fail the fault with VM_FAULT_RETRY, otherwise we update the
> PTE and we're done.
>
> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
> ---
> include/linux/mm.h | 2
> mm/memory.c | 118
> ++++++++++++++++++++++++++++++++++++++++++++++++++++-
> 2 files changed, 119 insertions(+), 1 deletion(-)
>
> --- a/include/linux/mm.h
> +++ b/include/linux/mm.h
> @@ -1162,6 +1162,8 @@ int generic_error_remove_page(struct add
> int invalidate_inode_page(struct page *page);
>
> #ifdef CONFIG_MMU
> +extern int handle_speculative_fault(struct mm_struct *mm,
> + unsigned long address, unsigned int flags);
> extern int handle_mm_fault(struct mm_struct *mm, struct vm_area_struct
> *vma,
> unsigned long address, unsigned int flags);
> extern int fixup_user_fault(struct task_struct *tsk, struct mm_struct *mm,
> --- a/mm/memory.c
> +++ b/mm/memory.c
> @@ -2004,12 +2004,40 @@ struct fault_env {
> pte_t entry;
> spinlock_t *ptl;
> unsigned int flags;
> + unsigned int sequence;
> };
>
> static bool pte_map_lock(struct fault_env *fe)
> {
> + bool ret = false;
> +
> + if (!(fe->flags & FAULT_FLAG_SPECULATIVE)) {
> + fe->pte = pte_offset_map_lock(fe->mm, fe->pmd, fe->address, &fe->ptl);
> + return true;
> + }
> +
> + /*
> + * The first vma_is_dead() guarantees the page-tables are still valid,
> + * having IRQs disabled ensures they stay around, hence the second
> + * vma_is_dead() to make sure they are still valid once we've got the
> + * lock. After that a concurrent zap_pte_range() will block on the PTL
> + * and thus we're safe.
> + */
> + local_irq_disable();
> + if (vma_is_dead(fe->vma, fe->sequence))
> + goto out;
> +
> fe->pte = pte_offset_map_lock(fe->mm, fe->pmd, fe->address, &fe->ptl);
> - return true;
> +
> + if (vma_is_dead(fe->vma, fe->sequence)) {
> + pte_unmap_unlock(fe->pte, fe->ptl);
> + goto out;
> + }
> +
> + ret = true;
> +out:
> + local_irq_enable();
> + return ret;
> }
>
> /*
> @@ -2432,6 +2460,7 @@ static int do_swap_page(struct fault_env
> entry = pte_to_swp_entry(fe->entry);
> if (unlikely(non_swap_entry(entry))) {
> if (is_migration_entry(entry)) {
> + /* XXX fe->pmd might be dead */
> migration_entry_wait(fe->mm, fe->pmd, fe->address);
> } else if (is_hwpoison_entry(entry)) {
> ret = VM_FAULT_HWPOISON;
> @@ -3357,6 +3386,93 @@ static int __handle_mm_fault(struct mm_s
> return handle_pte_fault(&fe);
> }
>
> +int handle_speculative_fault(struct mm_struct *mm, unsigned long address,
> unsigned int flags)
> +{
> + struct fault_env fe = {
> + .mm = mm,
> + .address = address,
> + .flags = flags | FAULT_FLAG_SPECULATIVE,
> + };
> + pgd_t *pgd;
> + pud_t *pud;
> + pmd_t *pmd;
> + pte_t *pte;
> + int dead, seq, idx, ret = VM_FAULT_RETRY;
> + struct vm_area_struct *vma;
> +
> + idx = srcu_read_lock(&vma_srcu);
> + vma = find_vma_srcu(mm, address);
> + if (!vma)
> + goto unlock;
> +
> + /*
> + * Validate the VMA found by the lockless lookup.
> + */
> + dead = RB_EMPTY_NODE(&vma->vm_rb);
> + seq = raw_read_seqcount(&vma->vm_sequence); /* rmb <->
> seqlock,vma_rb_erase() */
> + if ((seq & 1) || dead) /* XXX wait for !&1 instead? */
> + goto unlock;
> +
> + if (address < vma->vm_start || vma->vm_end <= address)
> + goto unlock;
> +
> + /*
> + * We need to re-validate the VMA after checking the bounds, otherwise
> + * we might have a false positive on the bounds.
> + */
> + if (read_seqcount_retry(&vma->vm_sequence, seq))
> + goto unlock;
> +
> + /*
> + * Do a speculative lookup of the PTE entry.
> + */
> + local_irq_disable();
> + pgd = pgd_offset(mm, address);
> + if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
> + goto out_walk;
> +
> + pud = pud_offset(pgd, address);
> + if (pud_none(*pud) || unlikely(pud_bad(*pud)))
> + goto out_walk;
> +
> + pmd = pmd_offset(pud, address);
> + if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
> + goto out_walk;
> +
> + /*
> + * The above does not allocate/instantiate page-tables because doing so
> + * would lead to the possibility of instantiating page-tables after
> + * free_pgtables() -- and consequently leaking them.
> + *
> + * The result is that we take at least one !speculative fault per PMD
> + * in order to instantiate it.
> + *
> + * XXX try and fix that.. should be possible somehow.
> + */
> +
> + if (pmd_huge(*pmd)) /* XXX no huge support */
> + goto out_walk;
> +
> + fe.vma = vma;
> + fe.pmd = pmd;
> + fe.sequence = seq;
> +
> + pte = pte_offset_map(pmd, address);
> + fe.entry = ACCESS_ONCE(pte); /* XXX gup_get_pte() */
I wonder if one char, "*", is missing.
btw, and more important, still correct for me to
address you Redhater, Sir?
Hillf
> + pte_unmap(pte);
> + local_irq_enable();
> +
> + ret = handle_pte_fault(&fe);
> +
> +unlock:
> + srcu_read_unlock(&vma_srcu, idx);
> + return ret;
> +
> +out_walk:
> + local_irq_enable();
> + goto unlock;
> +}
> +
> /*
> * By the time we get here, we already hold the mm semaphore
> *
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2014-10-21 9:07 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-21 9:07 Hillf Danton [this message]
2014-10-21 10:42 ` Peter Zijlstra
2014-10-21 10:43 ` Peter Zijlstra
-- strict thread matches above, loose matches on Subject: below --
2014-10-20 21:56 [RFC][PATCH 0/6] Another go at speculative page faults Peter Zijlstra
2014-10-20 21:56 ` [RFC][PATCH 5/6] mm: Provide speculative fault infrastructure Peter Zijlstra
2014-10-21 8:35 ` Kirill A. Shutemov
2014-10-21 10:41 ` Peter Zijlstra
2014-10-21 19:00 ` Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJd=RBAF3BS9GvPW+fNB9DNzyHrBZk4qNfU6QKUhNNKTMYkmNQ@mail.gmail.com' \
--to=dhillf@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=hillf.zj@alibaba-inc.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
--cc=mingo@redhat.com \
--cc=oleg@redhat.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=peterz@infradead.org \
--cc=riel@redhat.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=viro@zeniv.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox