From: Yosry Ahmed <yosryahmed@google.com>
To: Chengming Zhou <zhouchengming@bytedance.com>
Cc: Seth Jennings <sjenning@redhat.com>,
Dan Streetman <ddstreet@ieee.org>,
Chris Li <chriscli@google.com>, Nhat Pham <nphamcs@gmail.com>,
Vitaly Wool <vitaly.wool@konsulko.com>,
Andrew Morton <akpm@linux-foundation.org>,
Johannes Weiner <hannes@cmpxchg.org>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Chris Li <chrisl@kernel.org>
Subject: Re: [PATCH v2 2/6] mm/zswap: reuse dstmem when decompress
Date: Mon, 18 Dec 2023 01:24:20 -0800 [thread overview]
Message-ID: <CAJD7tka3r=gPUDYYpFShUVzyynE0RyKd9Gsk-S8jcexr255_UQ@mail.gmail.com> (raw)
In-Reply-To: <20231213-zswap-dstmem-v2-2-daa5d9ae41a7@bytedance.com>
On Mon, Dec 18, 2023 at 12:22 AM Chengming Zhou
<zhouchengming@bytedance.com> wrote:
>
> In the !zpool_can_sleep_mapped() case such as zsmalloc, we need to first
> copy the entry->handle memory to a temporary memory, which is allocated
> using kmalloc.
>
> Obviously we can reuse the per-compressor dstmem to avoid allocating
> every time, since it's percpu-compressor and protected in percpu mutex.
>
> Reviewed-by: Nhat Pham <nphamcs@gmail.com>
> Acked-by: Chris Li <chrisl@kernel.org>
> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
> ---
> mm/zswap.c | 44 ++++++++++++--------------------------------
> 1 file changed, 12 insertions(+), 32 deletions(-)
>
> diff --git a/mm/zswap.c b/mm/zswap.c
> index 976f278aa507..6b872744e962 100644
> --- a/mm/zswap.c
> +++ b/mm/zswap.c
> @@ -1417,19 +1417,13 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
> struct crypto_acomp_ctx *acomp_ctx;
> struct zpool *pool = zswap_find_zpool(entry);
> bool page_was_allocated;
> - u8 *src, *tmp = NULL;
> + u8 *src;
> unsigned int dlen;
> int ret;
> struct writeback_control wbc = {
> .sync_mode = WB_SYNC_NONE,
> };
>
> - if (!zpool_can_sleep_mapped(pool)) {
> - tmp = kmalloc(PAGE_SIZE, GFP_KERNEL);
> - if (!tmp)
> - return -ENOMEM;
> - }
> -
> /* try to allocate swap cache page */
> mpol = get_task_policy(current);
> page = __read_swap_cache_async(swpentry, GFP_KERNEL, mpol,
> @@ -1465,15 +1459,15 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
> /* decompress */
> acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
> dlen = PAGE_SIZE;
> + mutex_lock(acomp_ctx->mutex);
>
> src = zpool_map_handle(pool, entry->handle, ZPOOL_MM_RO);
> if (!zpool_can_sleep_mapped(pool)) {
> - memcpy(tmp, src, entry->length);
> - src = tmp;
> + memcpy(acomp_ctx->dstmem, src, entry->length);
> + src = acomp_ctx->dstmem;
> zpool_unmap_handle(pool, entry->handle);
> }
>
> - mutex_lock(acomp_ctx->mutex);
> sg_init_one(&input, src, entry->length);
> sg_init_table(&output, 1);
> sg_set_page(&output, page, PAGE_SIZE, 0);
> @@ -1482,9 +1476,7 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
> dlen = acomp_ctx->req->dlen;
> mutex_unlock(acomp_ctx->mutex);
>
> - if (!zpool_can_sleep_mapped(pool))
> - kfree(tmp);
> - else
> + if (zpool_can_sleep_mapped(pool))
> zpool_unmap_handle(pool, entry->handle);
>
> BUG_ON(ret);
> @@ -1508,9 +1500,6 @@ static int zswap_writeback_entry(struct zswap_entry *entry,
> return ret;
>
> fail:
> - if (!zpool_can_sleep_mapped(pool))
> - kfree(tmp);
> -
> /*
> * If we get here because the page is already in swapcache, a
> * load may be happening concurrently. It is safe and okay to
> @@ -1771,7 +1760,7 @@ bool zswap_load(struct folio *folio)
> struct zswap_entry *entry;
> struct scatterlist input, output;
> struct crypto_acomp_ctx *acomp_ctx;
> - u8 *src, *dst, *tmp;
> + u8 *src, *dst;
> struct zpool *zpool;
> unsigned int dlen;
> bool ret;
> @@ -1796,26 +1785,19 @@ bool zswap_load(struct folio *folio)
> }
>
> zpool = zswap_find_zpool(entry);
> - if (!zpool_can_sleep_mapped(zpool)) {
> - tmp = kmalloc(entry->length, GFP_KERNEL);
> - if (!tmp) {
> - ret = false;
> - goto freeentry;
> - }
> - }
>
> /* decompress */
> dlen = PAGE_SIZE;
> - src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
> + acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
> + mutex_lock(acomp_ctx->mutex);
>
> + src = zpool_map_handle(zpool, entry->handle, ZPOOL_MM_RO);
> if (!zpool_can_sleep_mapped(zpool)) {
> - memcpy(tmp, src, entry->length);
> - src = tmp;
> + memcpy(acomp_ctx->dstmem, src, entry->length);
> + src = acomp_ctx->dstmem;
> zpool_unmap_handle(zpool, entry->handle);
> }
>
> - acomp_ctx = raw_cpu_ptr(entry->pool->acomp_ctx);
> - mutex_lock(acomp_ctx->mutex);
> sg_init_one(&input, src, entry->length);
> sg_init_table(&output, 1);
> sg_set_page(&output, page, PAGE_SIZE, 0);
> @@ -1826,15 +1808,13 @@ bool zswap_load(struct folio *folio)
>
> if (zpool_can_sleep_mapped(zpool))
> zpool_unmap_handle(zpool, entry->handle);
> - else
> - kfree(tmp);
>
> ret = true;
> stats:
> count_vm_event(ZSWPIN);
> if (entry->objcg)
> count_objcg_event(entry->objcg, ZSWPIN);
> -freeentry:
> +
> spin_lock(&tree->lock);
> if (ret && zswap_exclusive_loads_enabled) {
> zswap_invalidate_entry(tree, entry);
>
> --
> b4 0.10.1
next prev parent reply other threads:[~2023-12-18 9:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-18 8:21 [PATCH v2 0/6] mm/zswap: dstmem reuse optimizations and cleanups Chengming Zhou
2023-12-18 8:22 ` [PATCH v2 1/6] mm/zswap: change dstmem size to one page Chengming Zhou
2023-12-19 11:56 ` Chris Li
2023-12-18 8:22 ` [PATCH v2 2/6] mm/zswap: reuse dstmem when decompress Chengming Zhou
2023-12-18 9:24 ` Yosry Ahmed [this message]
2023-12-18 8:22 ` [PATCH v2 3/6] mm/zswap: refactor out __zswap_load() Chengming Zhou
2023-12-18 8:22 ` [PATCH v2 4/6] mm/zswap: cleanup zswap_load() Chengming Zhou
2023-12-18 8:22 ` [PATCH v2 5/6] mm/zswap: cleanup zswap_writeback_entry() Chengming Zhou
2023-12-18 8:22 ` [PATCH v2 6/6] mm/zswap: directly use percpu mutex and buffer in load/store Chengming Zhou
2023-12-18 9:37 ` Yosry Ahmed
2023-12-18 11:26 ` Chengming Zhou
2023-12-18 11:54 ` Chengming Zhou
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAJD7tka3r=gPUDYYpFShUVzyynE0RyKd9Gsk-S8jcexr255_UQ@mail.gmail.com' \
--to=yosryahmed@google.com \
--cc=akpm@linux-foundation.org \
--cc=chriscli@google.com \
--cc=chrisl@kernel.org \
--cc=ddstreet@ieee.org \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nphamcs@gmail.com \
--cc=sjenning@redhat.com \
--cc=vitaly.wool@konsulko.com \
--cc=zhouchengming@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox