linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Barry Song <21cnbao@gmail.com>
To: Vernon Yang <vernon2gm@gmail.com>
Cc: akpm@linux-foundation.org, david@kernel.org,
	lorenzo.stoakes@oracle.com,  ziy@nvidia.com, dev.jain@arm.com,
	lance.yang@linux.dev, linux-mm@kvack.org,
	 linux-kernel@vger.kernel.org,
	Vernon Yang <yanglincheng@kylinos.cn>
Subject: Re: [PATCH mm-new v7 4/5] mm: khugepaged: skip lazy-free folios
Date: Sat, 7 Feb 2026 16:34:20 +0800	[thread overview]
Message-ID: <CAGsJ_4zxAmDS+FWzfX-670W3H3LM=nUZ-gGe3jMV9tYM0E_EaA@mail.gmail.com> (raw)
In-Reply-To: <20260207081613.588598-5-vernon2gm@gmail.com>

On Sat, Feb 7, 2026 at 4:16 PM Vernon Yang <vernon2gm@gmail.com> wrote:
>
> From: Vernon Yang <yanglincheng@kylinos.cn>
>
> For example, create three task: hot1 -> cold -> hot2. After all three
> task are created, each allocate memory 128MB. the hot1/hot2 task
> continuously access 128 MB memory, while the cold task only accesses
> its memory briefly and then call madvise(MADV_FREE). However, khugepaged
> still prioritizes scanning the cold task and only scans the hot2 task
> after completing the scan of the cold task.
>
> And if we collapse with a lazyfree page, that content will never be none
> and the deferred shrinker cannot reclaim them.
>
> So if the user has explicitly informed us via MADV_FREE that this memory
> will be freed, it is appropriate for khugepaged to skip it only, thereby
> avoiding unnecessary scan and collapse operations to reducing CPU
> wastage.
>
> Here are the performance test results:
> (Throughput bigger is better, other smaller is better)
>
> Testing on x86_64 machine:
>
> | task hot2           | without patch | with patch    |  delta  |
> |---------------------|---------------|---------------|---------|
> | total accesses time |  3.14 sec     |  2.93 sec     | -6.69%  |
> | cycles per access   |  4.96         |  2.21         | -55.44% |
> | Throughput          |  104.38 M/sec |  111.89 M/sec | +7.19%  |
> | dTLB-load-misses    |  284814532    |  69597236     | -75.56% |
>
> Testing on qemu-system-x86_64 -enable-kvm:
>
> | task hot2           | without patch | with patch    |  delta  |
> |---------------------|---------------|---------------|---------|
> | total accesses time |  3.35 sec     |  2.96 sec     | -11.64% |
> | cycles per access   |  7.29         |  2.07         | -71.60% |
> | Throughput          |  97.67 M/sec  |  110.77 M/sec | +13.41% |
> | dTLB-load-misses    |  241600871    |  3216108      | -98.67% |
>
> Signed-off-by: Vernon Yang <yanglincheng@kylinos.cn>
> Acked-by: David Hildenbrand (arm) <david@kernel.org>
> Reviewed-by: Lance Yang <lance.yang@linux.dev>
> ---
>  include/trace/events/huge_memory.h |  1 +
>  mm/khugepaged.c                    | 13 +++++++++++++
>  2 files changed, 14 insertions(+)
>
> diff --git a/include/trace/events/huge_memory.h b/include/trace/events/huge_memory.h
> index 384e29f6bef0..bcdc57eea270 100644
> --- a/include/trace/events/huge_memory.h
> +++ b/include/trace/events/huge_memory.h
> @@ -25,6 +25,7 @@
>         EM( SCAN_PAGE_LRU,              "page_not_in_lru")              \
>         EM( SCAN_PAGE_LOCK,             "page_locked")                  \
>         EM( SCAN_PAGE_ANON,             "page_not_anon")                \
> +       EM( SCAN_PAGE_LAZYFREE,         "page_lazyfree")                \
>         EM( SCAN_PAGE_COMPOUND,         "page_compound")                \
>         EM( SCAN_ANY_PROCESS,           "no_process_for_page")          \
>         EM( SCAN_VMA_NULL,              "vma_null")                     \
> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> index 8b68ae3bc2c5..0d160e612e16 100644
> --- a/mm/khugepaged.c
> +++ b/mm/khugepaged.c
> @@ -46,6 +46,7 @@ enum scan_result {
>         SCAN_PAGE_LRU,
>         SCAN_PAGE_LOCK,
>         SCAN_PAGE_ANON,
> +       SCAN_PAGE_LAZYFREE,
>         SCAN_PAGE_COMPOUND,
>         SCAN_ANY_PROCESS,
>         SCAN_VMA_NULL,
> @@ -583,6 +584,12 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
>                 folio = page_folio(page);
>                 VM_BUG_ON_FOLIO(!folio_test_anon(folio), folio);
>
> +               if (cc->is_khugepaged && !pte_dirty(pteval) &&
> +                   folio_test_lazyfree(folio)) {

We have two corner cases here:

1. Even if a lazyfree folio is dirty, if the VMA has the VM_DROPPABLE flag,
a lazyfree folio may still be dropped, even when its PTE is dirty.

2.  GUP operation can cause a folio to become dirty.

I see the corner cases from try_to_unmap_one():

                                if (folio_test_dirty(folio) &&
!(vma->vm_flags & VM_DROPPABLE)) {
                                        /*
                                         * redirtied either using the
page table or a previously
                                         * obtained GUP reference.
                                         */
                                        set_ptes(mm, address,
pvmw.pte, pteval, nr_pages);
                                        folio_set_swapbacked(folio);
                                        goto walk_abort;
                                }

Should we take these two corner cases into account?


> +                       result = SCAN_PAGE_LAZYFREE;
> +                       goto out;
> +               }
> +
>                 /* See hpage_collapse_scan_pmd(). */
>                 if (folio_maybe_mapped_shared(folio)) {
>                         ++shared;
> @@ -1335,6 +1342,12 @@ static enum scan_result hpage_collapse_scan_pmd(struct mm_struct *mm,
>                 }
>                 folio = page_folio(page);
>
> +               if (cc->is_khugepaged && !pte_dirty(pteval) &&
> +                   folio_test_lazyfree(folio)) {
> +                       result = SCAN_PAGE_LAZYFREE;
> +                       goto out_unmap;
> +               }
> +
>                 if (!folio_test_anon(folio)) {
>                         result = SCAN_PAGE_ANON;
>                         goto out_unmap;

Thanks
Barry


  reply	other threads:[~2026-02-07  8:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-02-07  8:16 [PATCH mm-new v7 0/5] Improve khugepaged scan logic Vernon Yang
2026-02-07  8:16 ` [PATCH mm-new v7 1/5] mm: khugepaged: add trace_mm_khugepaged_scan event Vernon Yang
2026-02-07  8:16 ` [PATCH mm-new v7 2/5] mm: khugepaged: refine scan progress number Vernon Yang
2026-02-08  9:17   ` Dev Jain
2026-02-08 13:25     ` Vernon Yang
2026-02-18  3:55   ` Vernon Yang
2026-02-18  8:05     ` David Hildenbrand (Arm)
2026-02-07  8:16 ` [PATCH mm-new v7 3/5] mm: add folio_test_lazyfree helper Vernon Yang
2026-02-07  8:16 ` [PATCH mm-new v7 4/5] mm: khugepaged: skip lazy-free folios Vernon Yang
2026-02-07  8:34   ` Barry Song [this message]
2026-02-07 13:51     ` Lance Yang
2026-02-07 21:38       ` David Hildenbrand (Arm)
2026-02-07 22:01         ` Barry Song
2026-02-07 22:05           ` David Hildenbrand (Arm)
2026-02-07 22:17             ` Barry Song
2026-02-07 22:25               ` David Hildenbrand (Arm)
2026-02-07 22:31                 ` Barry Song
2026-02-08 13:26                 ` Vernon Yang
2026-02-08  4:06         ` Lance Yang
2026-02-07  8:16 ` [PATCH mm-new v7 5/5] mm: khugepaged: set to next mm direct when mm has MMF_DISABLE_THP_COMPLETELY Vernon Yang
  -- strict thread matches above, loose matches on Subject: below --
2026-02-07  8:11 [PATCH mm-new v7 0/5] Improve khugepaged scan logic Vernon Yang
2026-02-07  8:11 ` [PATCH mm-new v7 4/5] mm: khugepaged: skip lazy-free folios Vernon Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAGsJ_4zxAmDS+FWzfX-670W3H3LM=nUZ-gGe3jMV9tYM0E_EaA@mail.gmail.com' \
    --to=21cnbao@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=david@kernel.org \
    --cc=dev.jain@arm.com \
    --cc=lance.yang@linux.dev \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lorenzo.stoakes@oracle.com \
    --cc=vernon2gm@gmail.com \
    --cc=yanglincheng@kylinos.cn \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox