From: Ives van Hoorne <ives@codesandbox.io>
To: Peter Xu <peterx@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
Andrea Arcangeli <aarcange@redhat.com>,
Axel Rasmussen <axelrasmussen@google.com>,
Nadav Amit <nadav.amit@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
Mike Rapoport <rppt@linux.vnet.ibm.com>,
stable@vger.kernel.org
Subject: Re: [PATCH v2 1/2] mm/migrate: Fix read-only page got writable when recover pte
Date: Thu, 10 Nov 2022 13:53:25 -0800 [thread overview]
Message-ID: <CADnc5G2-7B7qyPitDY33Wb0D5a=pq-1PC=gp0f9peTtVnOvzjw@mail.gmail.com> (raw)
In-Reply-To: <20221110203132.1498183-2-peterx@redhat.com>
[-- Attachment #1: Type: text/plain, Size: 3221 bytes --]
I verified these latest changes with my initial test case, and can confirm
that I haven't been able to reproduce the problem anymore! Usually, I would
be able to reproduce the error after ~1-5 runs, given that I would fill the
page cache before the run, now I have been running the same test case for
50+ times, and I haven't seen the error anymore.
Thanks again Peter for taking the time to find the issue and coming up with
a fix!
On Thu, Nov 10, 2022 at 21:31:31, Peter Xu <peterx@redhat.com> wrote:
> Ives van Hoorne from codesandbox.io reported an issue regarding possible
> data loss of uffd-wp when applied to memfds on heavily loaded systems. The
> sympton is some read page got data mismatch from the snapshot child VMs.
>
> Here I can also reproduce with a Rust reproducer that was provided by Ives
> that keeps taking snapshot of a 256MB VM, on a 32G system when I initiate
> 80 instances I can trigger the issues in ten minutes.
>
> It turns out that we got some pages write-through even if uffd-wp is
> applied to the pte.
>
> The problem is, when removing migration entries, we didn't really worry
> about write bit as long as we know it's not a write migration entry. That
> may not be true, for some memory types (e.g. writable shmem) mk_pte can
> return a pte with write bit set, then to recover the migration entry to its
> original state we need to explicit wr-protect the pte or it'll has the
> write bit set if it's a read migration entry.
>
> For uffd it can cause write-through. I didn't verify, but I think it'll be
> the same for mprotect()ed pages and after migration we can miss the sigbus
> instead.
>
> The relevant code on uffd was introduced in the anon support, which is
> commit f45ec5ff16a7 ("userfaultfd: wp: support swap and page migration",
> 2020-04-07). However anon shouldn't suffer from this problem because anon
> should already have the write bit cleared always, so that may not be a
> proper Fixes target. To satisfy the need on the backport, I'm attaching the
> Fixes tag to the uffd-wp shmem support. Since no one had issue with
> mprotect, so I assume that's also the kernel version we should start to
> backport for stable, and we shouldn't need to worry before that.
>
> Cc: Andrea Arcangeli <aarcange@redhat.com>
> Cc: stable@vger.kernel.org
> Fixes: b1f9e876862d ("mm/uffd: enable write protection for shmem &
> hugetlbfs") Reported-by: Ives van Hoorne <ives@codesandbox.io>
> Signed-off-by: Peter Xu <peterx@redhat.com>
> ---
> mm/migrate.c | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/mm/migrate.c b/mm/migrate.c
> index dff333593a8a..8b6351c08c78 100644
> --- a/mm/migrate.c
> +++ b/mm/migrate.c
> @@ -213,8 +213,14 @@ static bool remove_migration_pte(struct folio *folio,
> pte = pte_mkdirty(pte);
> if (is_writable_migration_entry(entry))
> pte = maybe_mkwrite(pte, vma);
> - else if (pte_swp_uffd_wp(*pvmw.pte))
> + else
> + /* NOTE: mk_pte can have write bit set */
> + pte = pte_wrprotect(pte);
> +
> + if (pte_swp_uffd_wp(*pvmw.pte)) {
> + WARN_ON_ONCE(pte_write(pte));
> pte = pte_mkuffd_wp(pte);
> + }
>
> if (folio_test_anon(folio) && !is_readable_migration_entry(entry))
> rmap_flags |= RMAP_EXCLUSIVE;
> --
> 2.37.3
>
[-- Attachment #2: Type: text/html, Size: 4918 bytes --]
next prev parent reply other threads:[~2022-11-10 21:53 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-10 20:31 [PATCH v2 0/2] mm/migrate: Fix writable pte for read migration entry Peter Xu
2022-11-10 20:31 ` [PATCH v2 1/2] mm/migrate: Fix read-only page got writable when recover pte Peter Xu
2022-11-10 21:28 ` Nadav Amit
2022-11-10 22:09 ` Peter Xu
2022-11-10 21:53 ` Ives van Hoorne [this message]
2022-11-10 22:08 ` Peter Xu
2022-11-10 23:42 ` Alistair Popple
2022-11-13 23:56 ` Peter Xu
2022-11-14 6:22 ` Alistair Popple
2022-11-14 16:09 ` David Hildenbrand
2022-11-14 20:09 ` Peter Xu
2022-11-15 9:13 ` David Hildenbrand
2022-11-15 16:08 ` Peter Xu
2022-11-15 17:22 ` David Hildenbrand
2022-11-15 17:54 ` David Hildenbrand
2022-11-15 18:11 ` Peter Xu
2022-11-15 18:16 ` David Hildenbrand
2022-11-15 18:03 ` Peter Xu
2022-11-15 18:08 ` David Hildenbrand
2022-11-10 20:31 ` [PATCH v2 2/2] mm/uffd: Sanity check write bit for uffd-wp protected ptes Peter Xu
2022-11-11 22:06 ` kernel test robot
2022-11-13 22:33 ` Peter Xu
2022-11-12 2:59 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CADnc5G2-7B7qyPitDY33Wb0D5a=pq-1PC=gp0f9peTtVnOvzjw@mail.gmail.com' \
--to=ives@codesandbox.io \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=axelrasmussen@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=nadav.amit@gmail.com \
--cc=peterx@redhat.com \
--cc=rppt@linux.vnet.ibm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox