From: Huacai Chen <chenhuacai@kernel.org>
To: Bibo Mao <maobibo@loongson.cn>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>,
Andrew Morton <akpm@linux-foundation.org>,
David Hildenbrand <david@redhat.com>,
Barry Song <baohua@kernel.org>,
loongarch@lists.linux.dev, linux-kernel@vger.kernel.org,
kasan-dev@googlegroups.com, linux-mm@kvack.org
Subject: Re: [PATCH 1/4] LoongArch: Set pte entry with PAGE_GLOBAL for kernel space
Date: Sat, 12 Oct 2024 10:15:51 +0800 [thread overview]
Message-ID: <CAAhV-H4q_P1HL74k5k+er9QEvZjMaa2kTYz8N+7aJ1vDii=GKQ@mail.gmail.com> (raw)
In-Reply-To: <20241010035048.3422527-2-maobibo@loongson.cn>
Hi, Bibo,
On Thu, Oct 10, 2024 at 11:50 AM Bibo Mao <maobibo@loongson.cn> wrote:
>
> Unlike general architectures, there are two pages for one TLB entry
> on LoongArch system. For kernel space, it requires both two pte
> entries with PAGE_GLOBAL set, else HW treats it as non-global tlb,
> there will be potential problems if tlb entry for kernel space is
> not global. Such as fail to flush kernel tlb with function
> local_flush_tlb_kernel_range() which only flush tlb with global bit.
>
> Here function kernel_pte_init() is added, it can be used to init
> pte table when it is created, so the default inital pte is
> PAGE_GLOBAL rather than zero at beginning.
I think kernel_pte_init() is also needed in zero_pmd_populate() in
mm/kasan/init.c. And moreover, the second patch should be squashed in
this one because they should be as a whole. Though the second one
touches the common code, I can merge it with mm maintainer's acked-by.
Huacai
>
> Kernel space areas includes fixmap, percpu, vmalloc and kasan areas
> set default pte entry with PAGE_GLOBAL set.
>
> Signed-off-by: Bibo Mao <maobibo@loongson.cn>
> ---
> arch/loongarch/include/asm/pgalloc.h | 13 +++++++++++++
> arch/loongarch/include/asm/pgtable.h | 1 +
> arch/loongarch/mm/init.c | 4 +++-
> arch/loongarch/mm/kasan_init.c | 4 +++-
> arch/loongarch/mm/pgtable.c | 22 ++++++++++++++++++++++
> 5 files changed, 42 insertions(+), 2 deletions(-)
>
> diff --git a/arch/loongarch/include/asm/pgalloc.h b/arch/loongarch/include/asm/pgalloc.h
> index 4e2d6b7ca2ee..b2698c03dc2c 100644
> --- a/arch/loongarch/include/asm/pgalloc.h
> +++ b/arch/loongarch/include/asm/pgalloc.h
> @@ -10,8 +10,21 @@
>
> #define __HAVE_ARCH_PMD_ALLOC_ONE
> #define __HAVE_ARCH_PUD_ALLOC_ONE
> +#define __HAVE_ARCH_PTE_ALLOC_ONE_KERNEL
> #include <asm-generic/pgalloc.h>
>
> +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
> +{
> + pte_t *pte;
> +
> + pte = (pte_t *) __get_free_page(GFP_KERNEL);
> + if (!pte)
> + return NULL;
> +
> + kernel_pte_init(pte);
> + return pte;
> +}
> +
> static inline void pmd_populate_kernel(struct mm_struct *mm,
> pmd_t *pmd, pte_t *pte)
> {
> diff --git a/arch/loongarch/include/asm/pgtable.h b/arch/loongarch/include/asm/pgtable.h
> index 9965f52ef65b..22e3a8f96213 100644
> --- a/arch/loongarch/include/asm/pgtable.h
> +++ b/arch/loongarch/include/asm/pgtable.h
> @@ -269,6 +269,7 @@ extern void set_pmd_at(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp, pm
> extern void pgd_init(void *addr);
> extern void pud_init(void *addr);
> extern void pmd_init(void *addr);
> +extern void kernel_pte_init(void *addr);
>
> /*
> * Encode/decode swap entries and swap PTEs. Swap PTEs are all PTEs that
> diff --git a/arch/loongarch/mm/init.c b/arch/loongarch/mm/init.c
> index 8a87a482c8f4..9f26e933a8a3 100644
> --- a/arch/loongarch/mm/init.c
> +++ b/arch/loongarch/mm/init.c
> @@ -198,9 +198,11 @@ pte_t * __init populate_kernel_pte(unsigned long addr)
> if (!pmd_present(pmdp_get(pmd))) {
> pte_t *pte;
>
> - pte = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
> + pte = memblock_alloc_raw(PAGE_SIZE, PAGE_SIZE);
> if (!pte)
> panic("%s: Failed to allocate memory\n", __func__);
> +
> + kernel_pte_init(pte);
> pmd_populate_kernel(&init_mm, pmd, pte);
> }
>
> diff --git a/arch/loongarch/mm/kasan_init.c b/arch/loongarch/mm/kasan_init.c
> index 427d6b1aec09..34988573b0d5 100644
> --- a/arch/loongarch/mm/kasan_init.c
> +++ b/arch/loongarch/mm/kasan_init.c
> @@ -152,6 +152,8 @@ static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
> phys_addr_t page_phys = early ?
> __pa_symbol(kasan_early_shadow_page)
> : kasan_alloc_zeroed_page(node);
> + if (!early)
> + kernel_pte_init(__va(page_phys));
> next = addr + PAGE_SIZE;
> set_pte(ptep, pfn_pte(__phys_to_pfn(page_phys), PAGE_KERNEL));
> } while (ptep++, addr = next, addr != end && __pte_none(early, ptep_get(ptep)));
> @@ -287,7 +289,7 @@ void __init kasan_init(void)
> set_pte(&kasan_early_shadow_pte[i],
> pfn_pte(__phys_to_pfn(__pa_symbol(kasan_early_shadow_page)), PAGE_KERNEL_RO));
>
> - memset(kasan_early_shadow_page, 0, PAGE_SIZE);
> + kernel_pte_init(kasan_early_shadow_page);
> csr_write64(__pa_symbol(swapper_pg_dir), LOONGARCH_CSR_PGDH);
> local_flush_tlb_all();
>
> diff --git a/arch/loongarch/mm/pgtable.c b/arch/loongarch/mm/pgtable.c
> index eb6a29b491a7..228ffc1db0a3 100644
> --- a/arch/loongarch/mm/pgtable.c
> +++ b/arch/loongarch/mm/pgtable.c
> @@ -38,6 +38,28 @@ pgd_t *pgd_alloc(struct mm_struct *mm)
> }
> EXPORT_SYMBOL_GPL(pgd_alloc);
>
> +void kernel_pte_init(void *addr)
> +{
> + unsigned long *p, *end;
> + unsigned long entry;
> +
> + entry = (unsigned long)_PAGE_GLOBAL;
> + p = (unsigned long *)addr;
> + end = p + PTRS_PER_PTE;
> +
> + do {
> + p[0] = entry;
> + p[1] = entry;
> + p[2] = entry;
> + p[3] = entry;
> + p[4] = entry;
> + p += 8;
> + p[-3] = entry;
> + p[-2] = entry;
> + p[-1] = entry;
> + } while (p != end);
> +}
> +
> void pgd_init(void *addr)
> {
> unsigned long *p, *end;
> --
> 2.39.3
>
next prev parent reply other threads:[~2024-10-12 2:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-10-10 3:50 [PATCH 0/4] LoongArch: Fix vmalloc test issue Bibo Mao
2024-10-10 3:50 ` [PATCH 1/4] LoongArch: Set pte entry with PAGE_GLOBAL for kernel space Bibo Mao
2024-10-12 2:15 ` Huacai Chen [this message]
2024-10-12 2:40 ` maobibo
2024-10-10 3:50 ` [PATCH 2/4] mm/sparse-vmemmap: set pte_init when vmemmap is created Bibo Mao
2024-10-11 4:42 ` kernel test robot
2024-10-11 4:42 ` kernel test robot
2024-10-12 2:17 ` Huacai Chen
2024-10-10 3:50 ` [PATCH 3/4] LoongArch: Add barrier between set_pte and memory access Bibo Mao
2024-10-12 2:16 ` Huacai Chen
2024-10-12 2:48 ` maobibo
2024-10-10 3:50 ` [PATCH 4/4] LoongArch: Use atomic operation with set_pte and pte_clear function Bibo Mao
2024-10-12 2:16 ` Huacai Chen
2024-10-12 2:51 ` maobibo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAAhV-H4q_P1HL74k5k+er9QEvZjMaa2kTYz8N+7aJ1vDii=GKQ@mail.gmail.com' \
--to=chenhuacai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=david@redhat.com \
--cc=kasan-dev@googlegroups.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=loongarch@lists.linux.dev \
--cc=maobibo@loongson.cn \
--cc=ryabinin.a.a@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox