From: Wei Xu <weixugc@google.com>
To: "Huang, Ying" <ying.huang@intel.com>
Cc: Aneesh Kumar K V <aneesh.kumar@linux.ibm.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Linux MM <linux-mm@kvack.org>,
Andrew Morton <akpm@linux-foundation.org>,
Yang Shi <shy828301@gmail.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Tim C Chen <tim.c.chen@intel.com>,
Michal Hocko <mhocko@kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Hesham Almatary <hesham.almatary@huawei.com>,
Dave Hansen <dave.hansen@intel.com>,
Jonathan Cameron <Jonathan.Cameron@huawei.com>,
Alistair Popple <apopple@nvidia.com>,
Dan Williams <dan.j.williams@intel.com>,
jvgediya.oss@gmail.com, Bharata B Rao <bharata@amd.com>,
Greg Thelen <gthelen@google.com>
Subject: Re: [PATCH v3 updated] mm/demotion: Expose memory tier details via sysfs
Date: Thu, 1 Sep 2022 22:09:13 -0700 [thread overview]
Message-ID: <CAAPL-u8MEs04DkHy6kaS788VjdYZZjAYOgzMnioOzDXbc0ZhhQ@mail.gmail.com> (raw)
In-Reply-To: <87pmgezkhp.fsf@yhuang6-desk2.ccr.corp.intel.com>
On Thu, Sep 1, 2022 at 5:33 PM Huang, Ying <ying.huang@intel.com> wrote:
>
> Aneesh Kumar K V <aneesh.kumar@linux.ibm.com> writes:
>
> > On 9/1/22 12:31 PM, Huang, Ying wrote:
> >> "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> writes:
> >>
> >>> This patch adds /sys/devices/virtual/memory_tiering/ where all memory tier
> >>> related details can be found. All allocated memory tiers will be listed
> >>> there as /sys/devices/virtual/memory_tiering/memory_tierN/
> >>>
> >>> The nodes which are part of a specific memory tier can be listed via
> >>> /sys/devices/virtual/memory_tiering/memory_tierN/nodes
> >>
> >> I think "memory_tier" is a better subsystem/bus name than
> >> memory_tiering. Because we have a set of memory_tierN devices inside.
> >> "memory_tier" sounds more natural. I know this is subjective, just my
> >> preference.
> >>
> >>>
> >>> A directory hierarchy looks like
> >>> :/sys/devices/virtual/memory_tiering$ tree memory_tier4/
> >>> memory_tier4/
> >>> ├── nodes
> >>> ├── subsystem -> ../../../../bus/memory_tiering
> >>> └── uevent
> >>>
> >>> All toptier nodes are listed via
> >>> /sys/devices/virtual/memory_tiering/toptier_nodes
> >>>
> >>> :/sys/devices/virtual/memory_tiering$ cat toptier_nodes
> >>> 0,2
> >>> :/sys/devices/virtual/memory_tiering$ cat memory_tier4/nodes
> >>> 0,2
> >>
> >> I don't think that it is a good idea to show toptier information in user
> >> space interface. Because it is just a in kernel implementation
> >> details. Now, we only promote pages from !toptier to toptier. But
> >> there may be multiple memory tiers in toptier and !toptier, we may
> >> change the implementation in the future. For example, we may promote
> >> pages from DRAM to HBM in the future.
> >>
> >
> >
> > In the case you describe above and others, we will always have a list of
> > NUMA nodes from which memory promotion is not done.
> > /sys/devices/virtual/memory_tiering/toptier_nodes shows that list.
>
> I don't think we will need that interface if we don't restrict promotion
> in the future. For example, he can just check the memory tier with
> smallest number.
>
> TBH, I don't know why do we need that interface. What is it for? We
> don't want to expose unnecessary information to restrict our in kernel
> implementation in the future.
>
> So, please remove that interface at least before we discussing it
> thoroughly.
I have asked for this interface to allow the userspace to query a list
of top-tier nodes as the targets of userspace-driven promotions. The
idea is that demotion can gradually go down tier by tier, but we
promote hot pages directly to the top-tier and bypass the immediate
tiers.
Certainly, this can be viewed as a policy choice. Given that now we
have a clearly defined memory tier hierarchy in sysfs and the
toptier_nodes content can be constructed from this memory tier
hierarchy and other information from the node sysfs interfaces, I am
fine if we want to remove toptier_nodes and keep the current memory
tier sysfs interfaces to the minimal.
Wei Xu
> >> Do we need a way to show the default memory tier in sysfs? That is, the
> >> memory tier that the DRAM nodes belong to.
> >>
> >
> > I will hold adding that until we have support for modifying memory tier details from
> > userspace. That is when userspace would want to know about the default memory tier.
> >
> > For now, the user interface is a simpler hierarchy of memory tiers, it's associated
> > nodes and the list of nodes from which promotion is not done.
>
> OK.
>
> Best Regards,
> Huang, Ying
next prev parent reply other threads:[~2022-09-02 5:09 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 8:17 Aneesh Kumar K.V
2022-09-01 7:01 ` Huang, Ying
2022-09-01 8:24 ` Aneesh Kumar K V
2022-09-02 0:29 ` Huang, Ying
2022-09-02 5:09 ` Wei Xu [this message]
2022-09-02 5:15 ` Huang, Ying
2022-09-02 5:23 ` Aneesh Kumar K V
2022-09-02 5:40 ` Huang, Ying
2022-09-02 5:46 ` Aneesh Kumar K V
2022-09-02 6:12 ` Huang, Ying
2022-09-02 6:31 ` Aneesh Kumar K V
2022-09-02 6:40 ` Huang, Ying
2022-09-02 6:44 ` Aneesh Kumar K V
2022-09-02 7:02 ` Wei Xu
2022-09-02 7:57 ` Huang, Ying
2022-09-02 8:48 ` Aneesh Kumar K V
2022-09-02 9:04 ` Huang, Ying
2022-09-02 9:44 ` Aneesh Kumar K V
2022-09-05 1:52 ` Huang, Ying
2022-09-05 3:50 ` Aneesh Kumar K V
2022-09-05 5:13 ` Huang, Ying
2022-09-05 5:27 ` Aneesh Kumar K V
2022-09-05 5:53 ` Huang, Ying
2022-09-05 6:14 ` Aneesh Kumar K V
2022-09-05 6:24 ` Huang, Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAAPL-u8MEs04DkHy6kaS788VjdYZZjAYOgzMnioOzDXbc0ZhhQ@mail.gmail.com \
--to=weixugc@google.com \
--cc=Jonathan.Cameron@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=apopple@nvidia.com \
--cc=bharata@amd.com \
--cc=dan.j.williams@intel.com \
--cc=dave.hansen@intel.com \
--cc=dave@stgolabs.net \
--cc=gthelen@google.com \
--cc=hannes@cmpxchg.org \
--cc=hesham.almatary@huawei.com \
--cc=jvgediya.oss@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@kernel.org \
--cc=shy828301@gmail.com \
--cc=tim.c.chen@intel.com \
--cc=ying.huang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox