[PATCH mm-unstable v15 00/13] khugepaged: mTHP support

[PATCH mm-unstable v15 00/13] khugepaged: mTHP support

[Nico Pache]

This series depends on [1], which provides some cleanup and prereqs.
Some of those patches used to belong to the V14 of this series.

The following series provides khugepaged with the capability to collapse
anonymous memory regions to mTHPs.

To achieve this we generalize the khugepaged functions to no longer depend
on PMD_ORDER. Then during the PMD scan, we use a bitmap to track individual
pages that are occupied (!none/zero). After the PMD scan is done, we use
the bitmap to find the optimal mTHP sizes for the PMD range. The
restriction on max_ptes_none is removed during the scan, to make sure we
account for the whole PMD range in the bitmap. When no mTHP size is
enabled, the legacy behavior of khugepaged is maintained.

We currently only support max_ptes_none values of 0 or HPAGE_PMD_NR - 1
(ie 511). If any other value is specified, the kernel will emit a warning
and no mTHP collapse will be attempted. If a mTHP collapse is attempted,
but contains swapped out, or shared pages, we don't perform the collapse.
It is now also possible to collapse to mTHPs without requiring the PMD THP
size to be enabled. These limitiations are to prevent collapse "creep"
behavior. This prevents constantly promoting mTHPs to the next available
size, which would occur because a collapse introduces more non-zero pages
that would satisfy the promotion condition on subsequent scans.

Patch 1-5:   Generalize khugepaged functions for arbitrary orders and
             introduce some helper functions
Patch 6:     Skip collapsing mTHP to smaller orders
Patch 7-8:   Add per-order mTHP statistics and tracepoints
Patch 9:     Introduce collapse_allowable_orders
Patch 10-12: Introduce bitmap and mTHP collapse support, fully enabled
Patch 13:    Documentation

Testing:
- Built for x86_64, aarch64, ppc64le, and s390x
- ran all arches on test suites provided by the kernel-tests project
- internal testing suites: functional testing and performance testing
- selftests mm
- I created a test script that I used to push khugepaged to its limits
   while monitoring a number of stats and tracepoints. The code is
   available here[2] (Run in legacy mode for these changes and set mthp
   sizes to inherit)
   The summary from my testings was that there was no significant
   regression noticed through this test. In some cases my changes had
   better collapse latencies, and was able to scan more pages in the same
   amount of time/work, but for the most part the results were consistent.
- redis testing. I did some testing with these changes along with my defer
  changes (see followup [4] post for more details). We've decided to get
  the mTHP changes merged first before attempting the defer series.
- some basic testing on 64k page size.
- lots of general use.

V15 changes:
- Split the series into two [1] to ease review, and keep this series
  fully khugepaged related (David, Lorenzo)
- Refactored collapse_max_ptes_none to remove the full_scan boolean arg
  moving the logic to the caller (Lorenzo)
- added /*bool=*/ comments to ambiguous function arguments (Lorenzo)
- A few changes that were requested in v14 were done in [1], such as
  introducing map_anon_folio_pte_(no)pf, defining the
  COLLAPSE_MAX_PTES_LIMIT macro, and the fixup of the writeback retry
  logic. These changes were noted in the v1 of the cleanup series [1].
  Some of these requested changes are leveraged in this series
  (is_pmd_order, DEFINE usage, and map_anon_folio_pte_(no)pf).

V14: https://lore.kernel.org/lkml/20260122192841.128719-1-npache@redhat.com/
V13: https://lore.kernel.org/lkml/20251201174627.23295-1-npache@redhat.com/
V12: https://lore.kernel.org/lkml/20251022183717.70829-1-npache@redhat.com/
V11: https://lore.kernel.org/lkml/20250912032810.197475-1-npache@redhat.com/
V10: https://lore.kernel.org/lkml/20250819134205.622806-1-npache@redhat.com/
V9 : https://lore.kernel.org/lkml/20250714003207.113275-1-npache@redhat.com/
V8 : https://lore.kernel.org/lkml/20250702055742.102808-1-npache@redhat.com/
V7 : https://lore.kernel.org/lkml/20250515032226.128900-1-npache@redhat.com/
V6 : https://lore.kernel.org/lkml/20250515030312.125567-1-npache@redhat.com/
V5 : https://lore.kernel.org/lkml/20250428181218.85925-1-npache@redhat.com/
V4 : https://lore.kernel.org/lkml/20250417000238.74567-1-npache@redhat.com/
V3 : https://lore.kernel.org/lkml/20250414220557.35388-1-npache@redhat.com/
V2 : https://lore.kernel.org/lkml/20250211003028.213461-1-npache@redhat.com/
V1 : https://lore.kernel.org/lkml/20250108233128.14484-1-npache@redhat.com/

A big thanks to everyone that has reviewed, tested, and participated in
the development process. Its been a great experience working with all of
you on this endeavour.

[1] - https://lore.kernel.org/lkml/20260226012929.169479-1-npache@redhat.com/
[2] - https://gitlab.com/npache/khugepaged_mthp_test
[3] - https://lore.kernel.org/lkml/20260212021835.17755-1-npache@redhat.com/
[4] - https://lore.kernel.org/lkml/20250515033857.132535-1-npache@redhat.com/

Baolin Wang (1):
  mm/khugepaged: run khugepaged for all orders

Dev Jain (1):
  mm/khugepaged: generalize alloc_charge_folio()

Nico Pache (11):
  mm/khugepaged: generalize hugepage_vma_revalidate for mTHP support
  mm/khugepaged: generalize __collapse_huge_page_* for mTHP support
  mm/khugepaged: introduce collapse_max_ptes_none helper function
  mm/khugepaged: generalize collapse_huge_page for mTHP collapse
  mm/khugepaged: skip collapsing mTHP to smaller orders
  mm/khugepaged: add per-order mTHP collapse failure statistics
  mm/khugepaged: improve tracepoints for mTHP orders
  mm/khugepaged: introduce collapse_allowable_orders helper function
  mm/khugepaged: Introduce mTHP collapse support
  mm/khugepaged: avoid unnecessary mTHP collapse attempts
  Documentation: mm: update the admin guide for mTHP collapse

 Documentation/admin-guide/mm/transhuge.rst |  80 +++-
 include/linux/huge_mm.h                    |   5 +
 include/trace/events/huge_memory.h         |  34 +-
 mm/huge_memory.c                           |  11 +
 mm/khugepaged.c                            | 519 +++++++++++++++++----
 5 files changed, 522 insertions(+), 127 deletions(-)

-- 
2.53.0

[PATCH mm-unstable v15 01/13] mm/khugepaged: generalize hugepage_vma_revalidate for mTHP support

[Nico Pache]

For khugepaged to support different mTHP orders, we must generalize this
to check if the PMD is not shared by another VMA and that the order is
enabled.

No functional change in this patch. Also correct a comment about the
functionality of the revalidation.

Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Co-developed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 0058970d4579..c7f2c4a90910 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -895,12 +895,13 @@ static int collapse_find_target_node(struct collapse_control *cc)
 
 /*
  * If mmap_lock temporarily dropped, revalidate vma
- * before taking mmap_lock.
+ * after taking the mmap_lock again.
  * Returns enum scan_result value.
  */
 
 static enum scan_result hugepage_vma_revalidate(struct mm_struct *mm, unsigned long address,
-		bool expect_anon, struct vm_area_struct **vmap, struct collapse_control *cc)
+		bool expect_anon, struct vm_area_struct **vmap,
+		struct collapse_control *cc, unsigned int order)
 {
 	struct vm_area_struct *vma;
 	enum tva_type type = cc->is_khugepaged ? TVA_KHUGEPAGED :
@@ -913,15 +914,16 @@ static enum scan_result hugepage_vma_revalidate(struct mm_struct *mm, unsigned l
 	if (!vma)
 		return SCAN_VMA_NULL;
 
+	/* Always check the PMD order to ensure its not shared by another VMA */
 	if (!thp_vma_suitable_order(vma, address, PMD_ORDER))
 		return SCAN_ADDRESS_RANGE;
-	if (!thp_vma_allowable_order(vma, vma->vm_flags, type, PMD_ORDER))
+	if (!thp_vma_allowable_orders(vma, vma->vm_flags, type, BIT(order)))
 		return SCAN_VMA_CHECK;
 	/*
 	 * Anon VMA expected, the address may be unmapped then
 	 * remapped to file after khugepaged reaquired the mmap_lock.
 	 *
-	 * thp_vma_allowable_order may return true for qualified file
+	 * thp_vma_allowable_orders may return true for qualified file
 	 * vmas.
 	 */
 	if (expect_anon && (!(*vmap)->anon_vma || !vma_is_anonymous(*vmap)))
@@ -1114,7 +1116,8 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 		goto out_nolock;
 
 	mmap_read_lock(mm);
-	result = hugepage_vma_revalidate(mm, address, true, &vma, cc);
+	result = hugepage_vma_revalidate(mm, address, true, &vma, cc,
+					 HPAGE_PMD_ORDER);
 	if (result != SCAN_SUCCEED) {
 		mmap_read_unlock(mm);
 		goto out_nolock;
@@ -1148,7 +1151,8 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	 * mmap_lock.
 	 */
 	mmap_write_lock(mm);
-	result = hugepage_vma_revalidate(mm, address, true, &vma, cc);
+	result = hugepage_vma_revalidate(mm, address, true, &vma, cc,
+					 HPAGE_PMD_ORDER);
 	if (result != SCAN_SUCCEED)
 		goto out_up_write;
 	/* check if the pmd is still valid */
@@ -2863,7 +2867,7 @@ int madvise_collapse(struct vm_area_struct *vma, unsigned long start,
 			mmap_locked = true;
 			*lock_dropped = true;
 			result = hugepage_vma_revalidate(mm, addr, false, &vma,
-							 cc);
+							 cc, HPAGE_PMD_ORDER);
 			if (result  != SCAN_SUCCEED) {
 				last_fail = result;
 				goto out_nolock;
-- 
2.53.0

[PATCH mm-unstable v15 02/13] mm/khugepaged: generalize alloc_charge_folio()

[Nico Pache]

From: Dev Jain <dev.jain@arm.com>

Pass order to alloc_charge_folio() and update mTHP statistics.

Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Co-developed-by: Nico Pache <npache@redhat.com>
Signed-off-by: Nico Pache <npache@redhat.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
---
 Documentation/admin-guide/mm/transhuge.rst |  8 ++++++++
 include/linux/huge_mm.h                    |  2 ++
 mm/huge_memory.c                           |  4 ++++
 mm/khugepaged.c                            | 17 +++++++++++------
 4 files changed, 25 insertions(+), 6 deletions(-)

diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index 5fbc3d89bb07..c51932e6275d 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -639,6 +639,14 @@ anon_fault_fallback_charge
 	instead falls back to using huge pages with lower orders or
 	small pages even though the allocation was successful.
 
+collapse_alloc
+	is incremented every time a huge page is successfully allocated for a
+	khugepaged collapse.
+
+collapse_alloc_failed
+	is incremented every time a huge page allocation fails during a
+	khugepaged collapse.
+
 zswpout
 	is incremented every time a huge page is swapped out to zswap in one
 	piece without splitting.
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index bd7f0e1d8094..9941fc6d7bd8 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -128,6 +128,8 @@ enum mthp_stat_item {
 	MTHP_STAT_ANON_FAULT_ALLOC,
 	MTHP_STAT_ANON_FAULT_FALLBACK,
 	MTHP_STAT_ANON_FAULT_FALLBACK_CHARGE,
+	MTHP_STAT_COLLAPSE_ALLOC,
+	MTHP_STAT_COLLAPSE_ALLOC_FAILED,
 	MTHP_STAT_ZSWPOUT,
 	MTHP_STAT_SWPIN,
 	MTHP_STAT_SWPIN_FALLBACK,
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index a688d5ff806e..228f35e962b9 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -624,6 +624,8 @@ static struct kobj_attribute _name##_attr = __ATTR_RO(_name)
 DEFINE_MTHP_STAT_ATTR(anon_fault_alloc, MTHP_STAT_ANON_FAULT_ALLOC);
 DEFINE_MTHP_STAT_ATTR(anon_fault_fallback, MTHP_STAT_ANON_FAULT_FALLBACK);
 DEFINE_MTHP_STAT_ATTR(anon_fault_fallback_charge, MTHP_STAT_ANON_FAULT_FALLBACK_CHARGE);
+DEFINE_MTHP_STAT_ATTR(collapse_alloc, MTHP_STAT_COLLAPSE_ALLOC);
+DEFINE_MTHP_STAT_ATTR(collapse_alloc_failed, MTHP_STAT_COLLAPSE_ALLOC_FAILED);
 DEFINE_MTHP_STAT_ATTR(zswpout, MTHP_STAT_ZSWPOUT);
 DEFINE_MTHP_STAT_ATTR(swpin, MTHP_STAT_SWPIN);
 DEFINE_MTHP_STAT_ATTR(swpin_fallback, MTHP_STAT_SWPIN_FALLBACK);
@@ -689,6 +691,8 @@ static struct attribute *any_stats_attrs[] = {
 #endif
 	&split_attr.attr,
 	&split_failed_attr.attr,
+	&collapse_alloc_attr.attr,
+	&collapse_alloc_failed_attr.attr,
 	NULL,
 };
 
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index c7f2c4a90910..a9b645402b7f 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1061,21 +1061,26 @@ static enum scan_result __collapse_huge_page_swapin(struct mm_struct *mm,
 }
 
 static enum scan_result alloc_charge_folio(struct folio **foliop, struct mm_struct *mm,
-		struct collapse_control *cc)
+		struct collapse_control *cc, unsigned int order)
 {
 	gfp_t gfp = (cc->is_khugepaged ? alloc_hugepage_khugepaged_gfpmask() :
 		     GFP_TRANSHUGE);
 	int node = collapse_find_target_node(cc);
 	struct folio *folio;
 
-	folio = __folio_alloc(gfp, HPAGE_PMD_ORDER, node, &cc->alloc_nmask);
+	folio = __folio_alloc(gfp, order, node, &cc->alloc_nmask);
 	if (!folio) {
 		*foliop = NULL;
-		count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
+		if (is_pmd_order(order))
+			count_vm_event(THP_COLLAPSE_ALLOC_FAILED);
+		count_mthp_stat(order, MTHP_STAT_COLLAPSE_ALLOC_FAILED);
 		return SCAN_ALLOC_HUGE_PAGE_FAIL;
 	}
 
-	count_vm_event(THP_COLLAPSE_ALLOC);
+	if (is_pmd_order(order))
+		count_vm_event(THP_COLLAPSE_ALLOC);
+	count_mthp_stat(order, MTHP_STAT_COLLAPSE_ALLOC);
+
 	if (unlikely(mem_cgroup_charge(folio, mm, gfp))) {
 		folio_put(folio);
 		*foliop = NULL;
@@ -1111,7 +1116,7 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	 */
 	mmap_read_unlock(mm);
 
-	result = alloc_charge_folio(&folio, mm, cc);
+	result = alloc_charge_folio(&folio, mm, cc, HPAGE_PMD_ORDER);
 	if (result != SCAN_SUCCEED)
 		goto out_nolock;
 
@@ -1891,7 +1896,7 @@ static enum scan_result collapse_file(struct mm_struct *mm, unsigned long addr,
 	VM_BUG_ON(!IS_ENABLED(CONFIG_READ_ONLY_THP_FOR_FS) && !is_shmem);
 	VM_BUG_ON(start & (HPAGE_PMD_NR - 1));
 
-	result = alloc_charge_folio(&new_folio, mm, cc);
+	result = alloc_charge_folio(&new_folio, mm, cc, HPAGE_PMD_ORDER);
 	if (result != SCAN_SUCCEED)
 		goto out;
 
-- 
2.53.0

[PATCH mm-unstable v15 03/13] mm/khugepaged: generalize __collapse_huge_page_* for mTHP support

[Nico Pache]

generalize the order of the __collapse_huge_page_* functions
to support future mTHP collapse.

mTHP collapse will not honor the khugepaged_max_ptes_shared or
khugepaged_max_ptes_swap parameters, and will fail if it encounters a
shared or swapped entry.

No functional changes in this patch.

Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Co-developed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 73 +++++++++++++++++++++++++++++++------------------
 1 file changed, 47 insertions(+), 26 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index a9b645402b7f..ecdbbf6a01a6 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -535,7 +535,7 @@ static void release_pte_pages(pte_t *pte, pte_t *_pte,
 
 static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 		unsigned long start_addr, pte_t *pte, struct collapse_control *cc,
-		struct list_head *compound_pagelist)
+		unsigned int order, struct list_head *compound_pagelist)
 {
 	struct page *page = NULL;
 	struct folio *folio = NULL;
@@ -543,15 +543,17 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 	pte_t *_pte;
 	int none_or_zero = 0, shared = 0, referenced = 0;
 	enum scan_result result = SCAN_FAIL;
+	const unsigned long nr_pages = 1UL << order;
+	int max_ptes_none = khugepaged_max_ptes_none >> (HPAGE_PMD_ORDER - order);
 
-	for (_pte = pte; _pte < pte + HPAGE_PMD_NR;
+	for (_pte = pte; _pte < pte + nr_pages;
 	     _pte++, addr += PAGE_SIZE) {
 		pte_t pteval = ptep_get(_pte);
 		if (pte_none_or_zero(pteval)) {
 			++none_or_zero;
 			if (!userfaultfd_armed(vma) &&
 			    (!cc->is_khugepaged ||
-			     none_or_zero <= khugepaged_max_ptes_none)) {
+			     none_or_zero <= max_ptes_none)) {
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
@@ -585,8 +587,14 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 		/* See collapse_scan_pmd(). */
 		if (folio_maybe_mapped_shared(folio)) {
 			++shared;
-			if (cc->is_khugepaged &&
-			    shared > khugepaged_max_ptes_shared) {
+			/*
+			 * TODO: Support shared pages without leading to further
+			 * mTHP collapses. Currently bringing in new pages via
+			 * shared may cause a future higher order collapse on a
+			 * rescan of the same range.
+			 */
+			if (!is_pmd_order(order) || (cc->is_khugepaged &&
+			    shared > khugepaged_max_ptes_shared)) {
 				result = SCAN_EXCEED_SHARED_PTE;
 				count_vm_event(THP_SCAN_EXCEED_SHARED_PTE);
 				goto out;
@@ -679,18 +687,18 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 }
 
 static void __collapse_huge_page_copy_succeeded(pte_t *pte,
-						struct vm_area_struct *vma,
-						unsigned long address,
-						spinlock_t *ptl,
-						struct list_head *compound_pagelist)
+		struct vm_area_struct *vma, unsigned long address,
+		spinlock_t *ptl, unsigned int order,
+		struct list_head *compound_pagelist)
 {
-	unsigned long end = address + HPAGE_PMD_SIZE;
+	unsigned long end = address + (PAGE_SIZE << order);
 	struct folio *src, *tmp;
 	pte_t pteval;
 	pte_t *_pte;
 	unsigned int nr_ptes;
+	const unsigned long nr_pages = 1UL << order;
 
-	for (_pte = pte; _pte < pte + HPAGE_PMD_NR; _pte += nr_ptes,
+	for (_pte = pte; _pte < pte + nr_pages; _pte += nr_ptes,
 	     address += nr_ptes * PAGE_SIZE) {
 		nr_ptes = 1;
 		pteval = ptep_get(_pte);
@@ -743,13 +751,11 @@ static void __collapse_huge_page_copy_succeeded(pte_t *pte,
 }
 
 static void __collapse_huge_page_copy_failed(pte_t *pte,
-					     pmd_t *pmd,
-					     pmd_t orig_pmd,
-					     struct vm_area_struct *vma,
-					     struct list_head *compound_pagelist)
+		pmd_t *pmd, pmd_t orig_pmd, struct vm_area_struct *vma,
+		unsigned int order, struct list_head *compound_pagelist)
 {
 	spinlock_t *pmd_ptl;
-
+	const unsigned long nr_pages = 1UL << order;
 	/*
 	 * Re-establish the PMD to point to the original page table
 	 * entry. Restoring PMD needs to be done prior to releasing
@@ -763,7 +769,7 @@ static void __collapse_huge_page_copy_failed(pte_t *pte,
 	 * Release both raw and compound pages isolated
 	 * in __collapse_huge_page_isolate.
 	 */
-	release_pte_pages(pte, pte + HPAGE_PMD_NR, compound_pagelist);
+	release_pte_pages(pte, pte + nr_pages, compound_pagelist);
 }
 
 /*
@@ -783,16 +789,16 @@ static void __collapse_huge_page_copy_failed(pte_t *pte,
  */
 static enum scan_result __collapse_huge_page_copy(pte_t *pte, struct folio *folio,
 		pmd_t *pmd, pmd_t orig_pmd, struct vm_area_struct *vma,
-		unsigned long address, spinlock_t *ptl,
+		unsigned long address, spinlock_t *ptl, unsigned int order,
 		struct list_head *compound_pagelist)
 {
 	unsigned int i;
 	enum scan_result result = SCAN_SUCCEED;
-
+	const unsigned long nr_pages = 1UL << order;
 	/*
 	 * Copying pages' contents is subject to memory poison at any iteration.
 	 */
-	for (i = 0; i < HPAGE_PMD_NR; i++) {
+	for (i = 0; i < nr_pages; i++) {
 		pte_t pteval = ptep_get(pte + i);
 		struct page *page = folio_page(folio, i);
 		unsigned long src_addr = address + i * PAGE_SIZE;
@@ -811,10 +817,10 @@ static enum scan_result __collapse_huge_page_copy(pte_t *pte, struct folio *foli
 
 	if (likely(result == SCAN_SUCCEED))
 		__collapse_huge_page_copy_succeeded(pte, vma, address, ptl,
-						    compound_pagelist);
+						    order, compound_pagelist);
 	else
 		__collapse_huge_page_copy_failed(pte, pmd, orig_pmd, vma,
-						 compound_pagelist);
+						 order, compound_pagelist);
 
 	return result;
 }
@@ -985,12 +991,12 @@ static enum scan_result check_pmd_still_valid(struct mm_struct *mm,
  * Returns result: if not SCAN_SUCCEED, mmap_lock has been released.
  */
 static enum scan_result __collapse_huge_page_swapin(struct mm_struct *mm,
-		struct vm_area_struct *vma, unsigned long start_addr, pmd_t *pmd,
-		int referenced)
+		struct vm_area_struct *vma, unsigned long start_addr,
+		pmd_t *pmd, int referenced, unsigned int order)
 {
 	int swapped_in = 0;
 	vm_fault_t ret = 0;
-	unsigned long addr, end = start_addr + (HPAGE_PMD_NR * PAGE_SIZE);
+	unsigned long addr, end = start_addr + (PAGE_SIZE << order);
 	enum scan_result result;
 	pte_t *pte = NULL;
 	spinlock_t *ptl;
@@ -1022,6 +1028,19 @@ static enum scan_result __collapse_huge_page_swapin(struct mm_struct *mm,
 		    pte_present(vmf.orig_pte))
 			continue;
 
+		/*
+		 * TODO: Support swapin without leading to further mTHP
+		 * collapses. Currently bringing in new pages via swapin may
+		 * cause a future higher order collapse on a rescan of the same
+		 * range.
+		 */
+		if (!is_pmd_order(order)) {
+			pte_unmap(pte);
+			mmap_read_unlock(mm);
+			result = SCAN_EXCEED_SWAP_PTE;
+			goto out;
+		}
+
 		vmf.pte = pte;
 		vmf.ptl = ptl;
 		ret = do_swap_page(&vmf);
@@ -1141,7 +1160,7 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 		 * that case.  Continuing to collapse causes inconsistency.
 		 */
 		result = __collapse_huge_page_swapin(mm, vma, address, pmd,
-						     referenced);
+						     referenced, HPAGE_PMD_ORDER);
 		if (result != SCAN_SUCCEED)
 			goto out_nolock;
 	}
@@ -1189,6 +1208,7 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	pte = pte_offset_map_lock(mm, &_pmd, address, &pte_ptl);
 	if (pte) {
 		result = __collapse_huge_page_isolate(vma, address, pte, cc,
+						      HPAGE_PMD_ORDER,
 						      &compound_pagelist);
 		spin_unlock(pte_ptl);
 	} else {
@@ -1219,6 +1239,7 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 
 	result = __collapse_huge_page_copy(pte, folio, pmd, _pmd,
 					   vma, address, pte_ptl,
+					   HPAGE_PMD_ORDER,
 					   &compound_pagelist);
 	pte_unmap(pte);
 	if (unlikely(result != SCAN_SUCCEED))
-- 
2.53.0

[PATCH mm-unstable v15 04/13] mm/khugepaged: introduce collapse_max_ptes_none helper function

[Nico Pache]

The current mechanism for determining mTHP collapse scales the
khugepaged_max_ptes_none value based on the target order. This
introduces an undesirable feedback loop, or "creep", when max_ptes_none
is set to a value greater than HPAGE_PMD_NR / 2.

With this configuration, a successful collapse to order N will populate
enough pages to satisfy the collapse condition on order N+1 on the next
scan. This leads to unnecessary work and memory churn.

To fix this issue introduce a helper function that will limit mTHP
collapse support to two max_ptes_none values, 0 and HPAGE_PMD_NR - 1.
This effectively supports two modes:

- max_ptes_none=0: never introduce new none-pages for mTHP collapse.
- max_ptes_none=511 (on 4k pagesz): Always collapse to the highest
  available mTHP order.

This removes the possiblilty of "creep", while not modifying any uAPI
expectations. A warning will be emitted if any non-supported
max_ptes_none value is configured with mTHP enabled.

Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 40 +++++++++++++++++++++++++++++++++++++++-
 1 file changed, 39 insertions(+), 1 deletion(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index ecdbbf6a01a6..99f78f0e44c6 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -456,6 +456,36 @@ void __khugepaged_enter(struct mm_struct *mm)
 		wake_up_interruptible(&khugepaged_wait);
 }
 
+/**
+ * collapse_max_ptes_none - Calculate maximum allowed empty PTEs for collapse
+ * @order: The folio order being collapsed to
+ *
+ * For PMD-sized collapses (order == HPAGE_PMD_ORDER), use the configured
+ * khugepaged_max_ptes_none value.
+ *
+ * For mTHP collapses, we currently only support khugepaged_max_pte_none values
+ * of 0 or (COLLAPSE_MAX_PTES_LIMIT). Any other value will emit a warning and
+ * no mTHP collapse will be attempted
+ *
+ * Return: Maximum number of empty PTEs allowed for the collapse operation
+ */
+static unsigned int collapse_max_ptes_none(unsigned int order)
+{
+	if (is_pmd_order(order))
+		return khugepaged_max_ptes_none;
+
+	/* Zero/non-present collapse disabled. */
+	if (!khugepaged_max_ptes_none)
+		return 0;
+
+	if (khugepaged_max_ptes_none == COLLAPSE_MAX_PTES_LIMIT)
+		return (1 << order) - 1;
+
+	pr_warn_once("mTHP collapse only supports max_ptes_none values of 0 or %u\n",
+		      COLLAPSE_MAX_PTES_LIMIT);
+	return -EINVAL;
+}
+
 void khugepaged_enter_vma(struct vm_area_struct *vma,
 			  vm_flags_t vm_flags)
 {
@@ -541,10 +571,18 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 	struct folio *folio = NULL;
 	unsigned long addr = start_addr;
 	pte_t *_pte;
+	int max_ptes_none;
 	int none_or_zero = 0, shared = 0, referenced = 0;
 	enum scan_result result = SCAN_FAIL;
 	const unsigned long nr_pages = 1UL << order;
-	int max_ptes_none = khugepaged_max_ptes_none >> (HPAGE_PMD_ORDER - order);
+
+	if (cc->is_khugepaged)
+		max_ptes_none = collapse_max_ptes_none(order);
+	else
+		max_ptes_none = COLLAPSE_MAX_PTES_LIMIT;
+
+	if (max_ptes_none == -EINVAL)
+		return result;
 
 	for (_pte = pte; _pte < pte + nr_pages;
 	     _pte++, addr += PAGE_SIZE) {
-- 
2.53.0

[PATCH mm-unstable v15 05/13] mm/khugepaged: generalize collapse_huge_page for mTHP collapse

[Nico Pache]

Pass an order and offset to collapse_huge_page to support collapsing anon
memory to arbitrary orders within a PMD. order indicates what mTHP size we
are attempting to collapse to, and offset indicates were in the PMD to
start the collapse attempt.

For non-PMD collapse we must leave the anon VMA write locked until after
we collapse the mTHP-- in the PMD case all the pages are isolated, but in
the mTHP case this is not true, and we must keep the lock to prevent
changes to the VMA from occurring.

Also convert these BUG_ON's to WARN_ON_ONCE's as these conditions, while
unexpected, should not bring down the system.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 102 +++++++++++++++++++++++++++++-------------------
 1 file changed, 62 insertions(+), 40 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 99f78f0e44c6..fb3ba8fe5a6c 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1150,44 +1150,53 @@ static enum scan_result alloc_charge_folio(struct folio **foliop, struct mm_stru
 	return SCAN_SUCCEED;
 }
 
-static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long address,
-		int referenced, int unmapped, struct collapse_control *cc)
+static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long start_addr,
+		int referenced, int unmapped, struct collapse_control *cc,
+		bool *mmap_locked, unsigned int order)
 {
 	LIST_HEAD(compound_pagelist);
 	pmd_t *pmd, _pmd;
-	pte_t *pte;
+	pte_t *pte = NULL;
 	pgtable_t pgtable;
 	struct folio *folio;
 	spinlock_t *pmd_ptl, *pte_ptl;
 	enum scan_result result = SCAN_FAIL;
 	struct vm_area_struct *vma;
 	struct mmu_notifier_range range;
+	bool anon_vma_locked = false;
+	const unsigned long pmd_address = start_addr & HPAGE_PMD_MASK;
 
-	VM_BUG_ON(address & ~HPAGE_PMD_MASK);
+	VM_WARN_ON_ONCE(pmd_address & ~HPAGE_PMD_MASK);
 
 	/*
 	 * Before allocating the hugepage, release the mmap_lock read lock.
 	 * The allocation can take potentially a long time if it involves
 	 * sync compaction, and we do not need to hold the mmap_lock during
 	 * that. We will recheck the vma after taking it again in write mode.
+	 * If collapsing mTHPs we may have already released the read_lock.
 	 */
-	mmap_read_unlock(mm);
+	if (*mmap_locked) {
+		mmap_read_unlock(mm);
+		*mmap_locked = false;
+	}
 
-	result = alloc_charge_folio(&folio, mm, cc, HPAGE_PMD_ORDER);
+	result = alloc_charge_folio(&folio, mm, cc, order);
 	if (result != SCAN_SUCCEED)
 		goto out_nolock;
 
 	mmap_read_lock(mm);
-	result = hugepage_vma_revalidate(mm, address, true, &vma, cc,
-					 HPAGE_PMD_ORDER);
+	*mmap_locked = true;
+	result = hugepage_vma_revalidate(mm, pmd_address, true, &vma, cc, order);
 	if (result != SCAN_SUCCEED) {
 		mmap_read_unlock(mm);
+		*mmap_locked = false;
 		goto out_nolock;
 	}
 
-	result = find_pmd_or_thp_or_none(mm, address, &pmd);
+	result = find_pmd_or_thp_or_none(mm, pmd_address, &pmd);
 	if (result != SCAN_SUCCEED) {
 		mmap_read_unlock(mm);
+		*mmap_locked = false;
 		goto out_nolock;
 	}
 
@@ -1197,13 +1206,16 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 		 * released when it fails. So we jump out_nolock directly in
 		 * that case.  Continuing to collapse causes inconsistency.
 		 */
-		result = __collapse_huge_page_swapin(mm, vma, address, pmd,
-						     referenced, HPAGE_PMD_ORDER);
-		if (result != SCAN_SUCCEED)
+		result = __collapse_huge_page_swapin(mm, vma, start_addr, pmd,
+						     referenced, order);
+		if (result != SCAN_SUCCEED) {
+			*mmap_locked = false;
 			goto out_nolock;
+		}
 	}
 
 	mmap_read_unlock(mm);
+	*mmap_locked = false;
 	/*
 	 * Prevent all access to pagetables with the exception of
 	 * gup_fast later handled by the ptep_clear_flush and the VM
@@ -1213,20 +1225,20 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	 * mmap_lock.
 	 */
 	mmap_write_lock(mm);
-	result = hugepage_vma_revalidate(mm, address, true, &vma, cc,
-					 HPAGE_PMD_ORDER);
+	result = hugepage_vma_revalidate(mm, pmd_address, true, &vma, cc, order);
 	if (result != SCAN_SUCCEED)
 		goto out_up_write;
 	/* check if the pmd is still valid */
 	vma_start_write(vma);
-	result = check_pmd_still_valid(mm, address, pmd);
+	result = check_pmd_still_valid(mm, pmd_address, pmd);
 	if (result != SCAN_SUCCEED)
 		goto out_up_write;
 
 	anon_vma_lock_write(vma->anon_vma);
+	anon_vma_locked = true;
 
-	mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm, address,
-				address + HPAGE_PMD_SIZE);
+	mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, mm, start_addr,
+				start_addr + (PAGE_SIZE << order));
 	mmu_notifier_invalidate_range_start(&range);
 
 	pmd_ptl = pmd_lock(mm, pmd); /* probably unnecessary */
@@ -1238,24 +1250,21 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	 * Parallel GUP-fast is fine since GUP-fast will back off when
 	 * it detects PMD is changed.
 	 */
-	_pmd = pmdp_collapse_flush(vma, address, pmd);
+	_pmd = pmdp_collapse_flush(vma, pmd_address, pmd);
 	spin_unlock(pmd_ptl);
 	mmu_notifier_invalidate_range_end(&range);
 	tlb_remove_table_sync_one();
 
-	pte = pte_offset_map_lock(mm, &_pmd, address, &pte_ptl);
+	pte = pte_offset_map_lock(mm, &_pmd, start_addr, &pte_ptl);
 	if (pte) {
-		result = __collapse_huge_page_isolate(vma, address, pte, cc,
-						      HPAGE_PMD_ORDER,
-						      &compound_pagelist);
+		result = __collapse_huge_page_isolate(vma, start_addr, pte, cc,
+						      order, &compound_pagelist);
 		spin_unlock(pte_ptl);
 	} else {
 		result = SCAN_NO_PTE_TABLE;
 	}
 
 	if (unlikely(result != SCAN_SUCCEED)) {
-		if (pte)
-			pte_unmap(pte);
 		spin_lock(pmd_ptl);
 		BUG_ON(!pmd_none(*pmd));
 		/*
@@ -1265,21 +1274,21 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 		 */
 		pmd_populate(mm, pmd, pmd_pgtable(_pmd));
 		spin_unlock(pmd_ptl);
-		anon_vma_unlock_write(vma->anon_vma);
 		goto out_up_write;
 	}
 
 	/*
-	 * All pages are isolated and locked so anon_vma rmap
-	 * can't run anymore.
+	 * For PMD collapse all pages are isolated and locked so anon_vma
+	 * rmap can't run anymore. For mTHP collapse we must hold the lock
 	 */
-	anon_vma_unlock_write(vma->anon_vma);
+	if (is_pmd_order(order)) {
+		anon_vma_unlock_write(vma->anon_vma);
+		anon_vma_locked = false;
+	}
 
 	result = __collapse_huge_page_copy(pte, folio, pmd, _pmd,
-					   vma, address, pte_ptl,
-					   HPAGE_PMD_ORDER,
-					   &compound_pagelist);
-	pte_unmap(pte);
+					   vma, start_addr, pte_ptl,
+					   order, &compound_pagelist);
 	if (unlikely(result != SCAN_SUCCEED))
 		goto out_up_write;
 
@@ -1289,20 +1298,34 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long a
 	 * write.
 	 */
 	__folio_mark_uptodate(folio);
-	pgtable = pmd_pgtable(_pmd);
+	if (is_pmd_order(order)) { /* PMD collapse */
+		pgtable = pmd_pgtable(_pmd);
 
-	spin_lock(pmd_ptl);
-	BUG_ON(!pmd_none(*pmd));
-	pgtable_trans_huge_deposit(mm, pmd, pgtable);
-	map_anon_folio_pmd_nopf(folio, pmd, vma, address);
+		spin_lock(pmd_ptl);
+		WARN_ON_ONCE(!pmd_none(*pmd));
+		pgtable_trans_huge_deposit(mm, pmd, pgtable);
+		map_anon_folio_pmd_nopf(folio, pmd, vma, pmd_address);
+	} else { /* mTHP collapse */
+		spin_lock(pmd_ptl);
+		WARN_ON_ONCE(!pmd_none(*pmd));
+		map_anon_folio_pte_nopf(folio, pte, vma, start_addr, /*uffd_wp=*/ false);
+		smp_wmb(); /* make PTEs visible before PMD. See pmd_install() */
+		pmd_populate(mm, pmd, pmd_pgtable(_pmd));
+	}
 	spin_unlock(pmd_ptl);
 
 	folio = NULL;
 
 	result = SCAN_SUCCEED;
 out_up_write:
+	if (anon_vma_locked)
+		anon_vma_unlock_write(vma->anon_vma);
+	if (pte)
+		pte_unmap(pte);
 	mmap_write_unlock(mm);
+	*mmap_locked = false;
 out_nolock:
+	WARN_ON_ONCE(*mmap_locked);
 	if (folio)
 		folio_put(folio);
 	trace_mm_collapse_huge_page(mm, result == SCAN_SUCCEED, result);
@@ -1483,9 +1506,8 @@ static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 	pte_unmap_unlock(pte, ptl);
 	if (result == SCAN_SUCCEED) {
 		result = collapse_huge_page(mm, start_addr, referenced,
-					    unmapped, cc);
-		/* collapse_huge_page will return with the mmap_lock released */
-		*mmap_locked = false;
+					    unmapped, cc, mmap_locked,
+					    HPAGE_PMD_ORDER);
 	}
 out:
 	trace_mm_khugepaged_scan_pmd(mm, folio, referenced,
-- 
2.53.0

[PATCH mm-unstable v15 06/13] mm/khugepaged: skip collapsing mTHP to smaller orders

[Nico Pache]

khugepaged may try to collapse a mTHP to a smaller mTHP, resulting in
some pages being unmapped. Skip these cases until we have a way to check
if its ok to collapse to a smaller mTHP size (like in the case of a
partially mapped folio).

This patch is inspired by Dev Jain's work on khugepaged mTHP support [1].

[1] https://lore.kernel.org/lkml/20241216165105.56185-11-dev.jain@arm.com/

Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Co-developed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index fb3ba8fe5a6c..c739f26dd61e 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -638,6 +638,14 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 				goto out;
 			}
 		}
+		/*
+		 * TODO: In some cases of partially-mapped folios, we'd actually
+		 * want to collapse.
+		 */
+		if (!is_pmd_order(order) && folio_order(folio) >= order) {
+			result = SCAN_PTE_MAPPED_HUGEPAGE;
+			goto out;
+		}
 
 		if (folio_test_large(folio)) {
 			struct folio *f;
-- 
2.53.0

[PATCH mm-unstable v15 07/13] mm/khugepaged: add per-order mTHP collapse failure statistics

[Nico Pache]

Add three new mTHP statistics to track collapse failures for different
orders when encountering swap PTEs, excessive none PTEs, and shared PTEs:

- collapse_exceed_swap_pte: Increment when mTHP collapse fails due to swap
	PTEs

- collapse_exceed_none_pte: Counts when mTHP collapse fails due to
  	exceeding the none PTE threshold for the given order

- collapse_exceed_shared_pte: Counts when mTHP collapse fails due to shared
  	PTEs

These statistics complement the existing THP_SCAN_EXCEED_* events by
providing per-order granularity for mTHP collapse attempts. The stats are
exposed via sysfs under
`/sys/kernel/mm/transparent_hugepage/hugepages-*/stats/` for each
supported hugepage size.

As we currently dont support collapsing mTHPs that contain a swap or
shared entry, those statistics keep track of how often we are
encountering failed mTHP collapses due to these restrictions.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 Documentation/admin-guide/mm/transhuge.rst | 24 ++++++++++++++++++++++
 include/linux/huge_mm.h                    |  3 +++
 mm/huge_memory.c                           |  7 +++++++
 mm/khugepaged.c                            | 16 ++++++++++++---
 4 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index c51932e6275d..eebb1f6bbc6c 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -714,6 +714,30 @@ nr_anon_partially_mapped
        an anonymous THP as "partially mapped" and count it here, even though it
        is not actually partially mapped anymore.
 
+collapse_exceed_none_pte
+       The number of collapse attempts that failed due to exceeding the
+       max_ptes_none threshold. For mTHP collapse, Currently only max_ptes_none
+       values of 0 and (HPAGE_PMD_NR - 1) are supported. Any other value will
+       emit a warning and no mTHP collapse will be attempted. khugepaged will
+       try to collapse to the largest enabled (m)THP size; if it fails, it will
+       try the next lower enabled mTHP size. This counter records the number of
+       times a collapse attempt was skipped for exceeding the max_ptes_none
+       threshold, and khugepaged will move on to the next available mTHP size.
+
+collapse_exceed_swap_pte
+       The number of anonymous mTHP PTE ranges which were unable to collapse due
+       to containing at least one swap PTE. Currently khugepaged does not
+       support collapsing mTHP regions that contain a swap PTE. This counter can
+       be used to monitor the number of khugepaged mTHP collapses that failed
+       due to the presence of a swap PTE.
+
+collapse_exceed_shared_pte
+       The number of anonymous mTHP PTE ranges which were unable to collapse due
+       to containing at least one shared PTE. Currently khugepaged does not
+       support collapsing mTHP PTE ranges that contain a shared PTE. This
+       counter can be used to monitor the number of khugepaged mTHP collapses
+       that failed due to the presence of a shared PTE.
+
 As the system ages, allocating huge pages may be expensive as the
 system uses memory compaction to copy data around memory to free a
 huge page for use. There are some counters in ``/proc/vmstat`` to help
diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
index 9941fc6d7bd8..e8777bb2347d 100644
--- a/include/linux/huge_mm.h
+++ b/include/linux/huge_mm.h
@@ -144,6 +144,9 @@ enum mthp_stat_item {
 	MTHP_STAT_SPLIT_DEFERRED,
 	MTHP_STAT_NR_ANON,
 	MTHP_STAT_NR_ANON_PARTIALLY_MAPPED,
+	MTHP_STAT_COLLAPSE_EXCEED_SWAP,
+	MTHP_STAT_COLLAPSE_EXCEED_NONE,
+	MTHP_STAT_COLLAPSE_EXCEED_SHARED,
 	__MTHP_STAT_COUNT
 };
 
diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index 228f35e962b9..1049a207a257 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -642,6 +642,10 @@ DEFINE_MTHP_STAT_ATTR(split_failed, MTHP_STAT_SPLIT_FAILED);
 DEFINE_MTHP_STAT_ATTR(split_deferred, MTHP_STAT_SPLIT_DEFERRED);
 DEFINE_MTHP_STAT_ATTR(nr_anon, MTHP_STAT_NR_ANON);
 DEFINE_MTHP_STAT_ATTR(nr_anon_partially_mapped, MTHP_STAT_NR_ANON_PARTIALLY_MAPPED);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_swap_pte, MTHP_STAT_COLLAPSE_EXCEED_SWAP);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_none_pte, MTHP_STAT_COLLAPSE_EXCEED_NONE);
+DEFINE_MTHP_STAT_ATTR(collapse_exceed_shared_pte, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
+
 
 static struct attribute *anon_stats_attrs[] = {
 	&anon_fault_alloc_attr.attr,
@@ -658,6 +662,9 @@ static struct attribute *anon_stats_attrs[] = {
 	&split_deferred_attr.attr,
 	&nr_anon_attr.attr,
 	&nr_anon_partially_mapped_attr.attr,
+	&collapse_exceed_swap_pte_attr.attr,
+	&collapse_exceed_none_pte_attr.attr,
+	&collapse_exceed_shared_pte_attr.attr,
 	NULL,
 };
 
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index c739f26dd61e..a6cf90e09e4a 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -595,7 +595,9 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
-				count_vm_event(THP_SCAN_EXCEED_NONE_PTE);
+				if (is_pmd_order(order))
+					count_vm_event(THP_SCAN_EXCEED_NONE_PTE);
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_NONE);
 				goto out;
 			}
 		}
@@ -631,10 +633,17 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 			 * shared may cause a future higher order collapse on a
 			 * rescan of the same range.
 			 */
-			if (!is_pmd_order(order) || (cc->is_khugepaged &&
-			    shared > khugepaged_max_ptes_shared)) {
+			if (!is_pmd_order(order)) {
+				result = SCAN_EXCEED_SHARED_PTE;
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
+				goto out;
+			}
+
+			if (cc->is_khugepaged &&
+			    shared > khugepaged_max_ptes_shared) {
 				result = SCAN_EXCEED_SHARED_PTE;
 				count_vm_event(THP_SCAN_EXCEED_SHARED_PTE);
+				count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SHARED);
 				goto out;
 			}
 		}
@@ -1081,6 +1090,7 @@ static enum scan_result __collapse_huge_page_swapin(struct mm_struct *mm,
 		 * range.
 		 */
 		if (!is_pmd_order(order)) {
+			count_mthp_stat(order, MTHP_STAT_COLLAPSE_EXCEED_SWAP);
 			pte_unmap(pte);
 			mmap_read_unlock(mm);
 			result = SCAN_EXCEED_SWAP_PTE;
-- 
2.53.0

[PATCH mm-unstable v15 08/13] mm/khugepaged: improve tracepoints for mTHP orders

[Nico Pache]

Add the order to the mm_collapse_huge_page<_swapin,_isolate> tracepoints to
give better insight into what order is being operated at for.

Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 include/trace/events/huge_memory.h | 34 +++++++++++++++++++-----------
 mm/khugepaged.c                    |  9 ++++----
 2 files changed, 27 insertions(+), 16 deletions(-)

diff --git a/include/trace/events/huge_memory.h b/include/trace/events/huge_memory.h
index bcdc57eea270..c79dbcd60bdf 100644
--- a/include/trace/events/huge_memory.h
+++ b/include/trace/events/huge_memory.h
@@ -89,40 +89,44 @@ TRACE_EVENT(mm_khugepaged_scan_pmd,
 
 TRACE_EVENT(mm_collapse_huge_page,
 
-	TP_PROTO(struct mm_struct *mm, int isolated, int status),
+	TP_PROTO(struct mm_struct *mm, int isolated, int status, unsigned int order),
 
-	TP_ARGS(mm, isolated, status),
+	TP_ARGS(mm, isolated, status, order),
 
 	TP_STRUCT__entry(
 		__field(struct mm_struct *, mm)
 		__field(int, isolated)
 		__field(int, status)
+		__field(unsigned int, order)
 	),
 
 	TP_fast_assign(
 		__entry->mm = mm;
 		__entry->isolated = isolated;
 		__entry->status = status;
+		__entry->order = order;
 	),
 
-	TP_printk("mm=%p, isolated=%d, status=%s",
+	TP_printk("mm=%p, isolated=%d, status=%s order=%u",
 		__entry->mm,
 		__entry->isolated,
-		__print_symbolic(__entry->status, SCAN_STATUS))
+		__print_symbolic(__entry->status, SCAN_STATUS),
+		__entry->order)
 );
 
 TRACE_EVENT(mm_collapse_huge_page_isolate,
 
 	TP_PROTO(struct folio *folio, int none_or_zero,
-		 int referenced, int status),
+		 int referenced, int status, unsigned int order),
 
-	TP_ARGS(folio, none_or_zero, referenced, status),
+	TP_ARGS(folio, none_or_zero, referenced, status, order),
 
 	TP_STRUCT__entry(
 		__field(unsigned long, pfn)
 		__field(int, none_or_zero)
 		__field(int, referenced)
 		__field(int, status)
+		__field(unsigned int, order)
 	),
 
 	TP_fast_assign(
@@ -130,26 +134,30 @@ TRACE_EVENT(mm_collapse_huge_page_isolate,
 		__entry->none_or_zero = none_or_zero;
 		__entry->referenced = referenced;
 		__entry->status = status;
+		__entry->order = order;
 	),
 
-	TP_printk("scan_pfn=0x%lx, none_or_zero=%d, referenced=%d, status=%s",
+	TP_printk("scan_pfn=0x%lx, none_or_zero=%d, referenced=%d, status=%s order=%u",
 		__entry->pfn,
 		__entry->none_or_zero,
 		__entry->referenced,
-		__print_symbolic(__entry->status, SCAN_STATUS))
+		__print_symbolic(__entry->status, SCAN_STATUS),
+		__entry->order)
 );
 
 TRACE_EVENT(mm_collapse_huge_page_swapin,
 
-	TP_PROTO(struct mm_struct *mm, int swapped_in, int referenced, int ret),
+	TP_PROTO(struct mm_struct *mm, int swapped_in, int referenced, int ret,
+		 unsigned int order),
 
-	TP_ARGS(mm, swapped_in, referenced, ret),
+	TP_ARGS(mm, swapped_in, referenced, ret, order),
 
 	TP_STRUCT__entry(
 		__field(struct mm_struct *, mm)
 		__field(int, swapped_in)
 		__field(int, referenced)
 		__field(int, ret)
+		__field(unsigned int, order)
 	),
 
 	TP_fast_assign(
@@ -157,13 +165,15 @@ TRACE_EVENT(mm_collapse_huge_page_swapin,
 		__entry->swapped_in = swapped_in;
 		__entry->referenced = referenced;
 		__entry->ret = ret;
+		__entry->order = order;
 	),
 
-	TP_printk("mm=%p, swapped_in=%d, referenced=%d, ret=%d",
+	TP_printk("mm=%p, swapped_in=%d, referenced=%d, ret=%d, order=%u",
 		__entry->mm,
 		__entry->swapped_in,
 		__entry->referenced,
-		__entry->ret)
+		__entry->ret,
+		__entry->order)
 );
 
 TRACE_EVENT(mm_khugepaged_scan_file,
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index a6cf90e09e4a..2e66d660ee8e 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -731,13 +731,13 @@ static enum scan_result __collapse_huge_page_isolate(struct vm_area_struct *vma,
 	} else {
 		result = SCAN_SUCCEED;
 		trace_mm_collapse_huge_page_isolate(folio, none_or_zero,
-						    referenced, result);
+						    referenced, result, order);
 		return result;
 	}
 out:
 	release_pte_pages(pte, _pte, compound_pagelist);
 	trace_mm_collapse_huge_page_isolate(folio, none_or_zero,
-					    referenced, result);
+					    referenced, result, order);
 	return result;
 }
 
@@ -1131,7 +1131,8 @@ static enum scan_result __collapse_huge_page_swapin(struct mm_struct *mm,
 
 	result = SCAN_SUCCEED;
 out:
-	trace_mm_collapse_huge_page_swapin(mm, swapped_in, referenced, result);
+	trace_mm_collapse_huge_page_swapin(mm, swapped_in, referenced, result,
+					   order);
 	return result;
 }
 
@@ -1346,7 +1347,7 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long s
 	WARN_ON_ONCE(*mmap_locked);
 	if (folio)
 		folio_put(folio);
-	trace_mm_collapse_huge_page(mm, result == SCAN_SUCCEED, result);
+	trace_mm_collapse_huge_page(mm, result == SCAN_SUCCEED, result, order);
 	return result;
 }
 
-- 
2.53.0

[PATCH mm-unstable v15 09/13] mm/khugepaged: introduce collapse_allowable_orders helper function

[Nico Pache]

Add collapse_allowable_orders() to generalize THP order eligibility. The
function determines which THP orders are permitted based on collapse
context (khugepaged vs madv_collapse).

This consolidates collapse configuration logic and provides a clean
interface for future mTHP collapse support where the orders may be
different.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 2e66d660ee8e..2fdfb6d42cf9 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -486,12 +486,22 @@ static unsigned int collapse_max_ptes_none(unsigned int order)
 	return -EINVAL;
 }
 
+/* Check what orders are allowed based on the vma and collapse type */
+static unsigned long collapse_allowable_orders(struct vm_area_struct *vma,
+			vm_flags_t vm_flags, bool is_khugepaged)
+{
+	enum tva_type tva_flags = is_khugepaged ? TVA_KHUGEPAGED : TVA_FORCED_COLLAPSE;
+	unsigned long orders = BIT(HPAGE_PMD_ORDER);
+
+	return thp_vma_allowable_orders(vma, vm_flags, tva_flags, orders);
+}
+
 void khugepaged_enter_vma(struct vm_area_struct *vma,
 			  vm_flags_t vm_flags)
 {
 	if (!mm_flags_test(MMF_VM_HUGEPAGE, vma->vm_mm) &&
 	    hugepage_pmd_enabled()) {
-		if (thp_vma_allowable_order(vma, vm_flags, TVA_KHUGEPAGED, PMD_ORDER))
+		if (collapse_allowable_orders(vma, vm_flags, /*is_khugepaged=*/true))
 			__khugepaged_enter(vma->vm_mm);
 	}
 }
@@ -2637,7 +2647,7 @@ static unsigned int collapse_scan_mm_slot(unsigned int pages, enum scan_result *
 			progress++;
 			break;
 		}
-		if (!thp_vma_allowable_order(vma, vma->vm_flags, TVA_KHUGEPAGED, PMD_ORDER)) {
+		if (!collapse_allowable_orders(vma, vma->vm_flags, /*is_khugepaged=*/true)) {
 			progress++;
 			continue;
 		}
@@ -2949,7 +2959,7 @@ int madvise_collapse(struct vm_area_struct *vma, unsigned long start,
 	BUG_ON(vma->vm_start > start);
 	BUG_ON(vma->vm_end < end);
 
-	if (!thp_vma_allowable_order(vma, vma->vm_flags, TVA_FORCED_COLLAPSE, PMD_ORDER))
+	if (!collapse_allowable_orders(vma, vma->vm_flags, /*is_khugepaged=*/false))
 		return -EINVAL;
 
 	cc = kmalloc_obj(*cc);
-- 
2.53.0

[PATCH mm-unstable v15 10/13] mm/khugepaged: Introduce mTHP collapse support

[Nico Pache]

Enable khugepaged to collapse to mTHP orders. This patch implements the
main scanning logic using a bitmap to track occupied pages and a stack
structure that allows us to find optimal collapse sizes.

Previous to this patch, PMD collapse had 3 main phases, a light weight
scanning phase (mmap_read_lock) that determines a potential PMD
collapse, a alloc phase (mmap unlocked), then finally heavier collapse
phase (mmap_write_lock).

To enabled mTHP collapse we make the following changes:

During PMD scan phase, track occupied pages in a bitmap. When mTHP
orders are enabled, we remove the restriction of max_ptes_none during the
scan phase to avoid missing potential mTHP collapse candidates. Once we
have scanned the full PMD range and updated the bitmap to track occupied
pages, we use the bitmap to find the optimal mTHP size.

Implement collapse_scan_bitmap() to perform binary recursion on the bitmap
and determine the best eligible order for the collapse. A stack structure
is used instead of traditional recursion to manage the search. The
algorithm recursively splits the bitmap into smaller chunks to find the
highest order mTHPs that satisfy the collapse criteria. We start by
attempting the PMD order, then moved on the consecutively lower orders
(mTHP collapse). The stack maintains a pair of variables (offset, order),
indicating the number of PTEs from the start of the PMD, and the order of
the potential collapse candidate.

The algorithm for consuming the bitmap works as such:
    1) push (0, HPAGE_PMD_ORDER) onto the stack
    2) pop the stack
    3) check if the number of set bits in that (offset,order) pair
       statisfy the max_ptes_none threshold for that order
    4) if yes, attempt collapse
    5) if no (or collapse fails), push two new stack items representing
       the left and right halves of the current bitmap range, at the
       next lower order
    6) repeat at step (2) until stack is empty.

Below is a diagram representing the algorithm and stack items:

                           offset       mid_offset
                            |         |
                            |         |
                            v         v
          ____________________________________
         |          PTE Page Table            |
         --------------------------------------
			    <-------><------->
                             order-1  order-1

We currently only support mTHP collapse for max_ptes_none values of 0
and HPAGE_PMD_NR - 1. resulting in the following behavior:

    - max_ptes_none=0: Never introduce new empty pages during collapse
    - max_ptes_none=HPAGE_PMD_NR-1: Always try collapse to the highest
      available mTHP order

Any other max_ptes_none value will emit a warning and skip mTHP collapse
attempts. There should be no behavior change for PMD collapse.

Once we determine what mTHP sizes fits best in that PMD range a collapse
is attempted. A minimum collapse order of 2 is used as this is the lowest
order supported by anon memory as defined by THP_ORDERS_ALL_ANON.

mTHP collapses reject regions containing swapped out or shared pages.
This is because adding new entries can lead to new none pages, and these
may lead to constant promotion into a higher order (m)THP. A similar
issue can occur with "max_ptes_none > HPAGE_PMD_NR/2" due to a collapse
introducing at least 2x the number of pages, and on a future scan will
satisfy the promotion condition once again. This issue is prevented via
the collapse_max_ptes_none() function which imposes the max_ptes_none
restrictions above.

Currently madv_collapse is not supported and will only attempt PMD
collapse.

We can also remove the check for is_khugepaged inside the PMD scan as
the collapse_max_ptes_none() function handles this logic now.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 189 +++++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 180 insertions(+), 9 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 2fdfb6d42cf9..1c3711ed4513 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -99,6 +99,32 @@ static DEFINE_READ_MOSTLY_HASHTABLE(mm_slots_hash, MM_SLOTS_HASH_BITS);
 
 static struct kmem_cache *mm_slot_cache __ro_after_init;
 
+#define KHUGEPAGED_MIN_MTHP_ORDER	2
+/*
+ * The maximum number of mTHP ranges that can be stored on the stack.
+ * This is calculated based on the number of PTE entries in a PTE page table
+ * and the minimum mTHP order.
+ *
+ * ilog2(MAX_PTRS_PER_PTE) is log2 of the maximum number of PTE entries.
+ * This gives you the PMD_ORDER, and is needed in place of HPAGE_PMD_ORDER due
+ * to restrictions of some architectures (ie ppc64le).
+ *
+ * At most there will be 1 << (PMD_ORDER - KHUGEPAGED_MIN_MTHP_ORDER) mTHP ranges
+ */
+#define MTHP_STACK_SIZE	(1UL << (ilog2(MAX_PTRS_PER_PTE) - KHUGEPAGED_MIN_MTHP_ORDER))
+
+/*
+ * Defines a range of PTE entries in a PTE page table which are being
+ * considered for (m)THP collapse.
+ *
+ * @offset: the offset of the first PTE entry in a PMD range.
+ * @order: the order of the PTE entries being considered for collapse.
+ */
+struct mthp_range {
+	u16 offset;
+	u8 order;
+};
+
 struct collapse_control {
 	bool is_khugepaged;
 
@@ -107,6 +133,11 @@ struct collapse_control {
 
 	/* nodemask for allocation fallback */
 	nodemask_t alloc_nmask;
+
+	/* bitmap used for mTHP collapse */
+	DECLARE_BITMAP(mthp_bitmap, MAX_PTRS_PER_PTE);
+	DECLARE_BITMAP(mthp_bitmap_mask, MAX_PTRS_PER_PTE);
+	struct mthp_range mthp_bitmap_stack[MTHP_STACK_SIZE];
 };
 
 /**
@@ -1361,17 +1392,138 @@ static enum scan_result collapse_huge_page(struct mm_struct *mm, unsigned long s
 	return result;
 }
 
+static void mthp_stack_push(struct collapse_control *cc, int *stack_size,
+				   u16 offset, u8 order)
+{
+	const int size = *stack_size;
+	struct mthp_range *stack = &cc->mthp_bitmap_stack[size];
+
+	VM_WARN_ON_ONCE(size >= MTHP_STACK_SIZE);
+	stack->order = order;
+	stack->offset = offset;
+	(*stack_size)++;
+}
+
+static struct mthp_range mthp_stack_pop(struct collapse_control *cc, int *stack_size)
+{
+	const int size = *stack_size;
+
+	VM_WARN_ON_ONCE(size <= 0);
+	(*stack_size)--;
+	return cc->mthp_bitmap_stack[size - 1];
+}
+
+static unsigned int mthp_nr_occupied_pte_entries(struct collapse_control *cc,
+						 u16 offset, unsigned long nr_pte_entries)
+{
+	bitmap_zero(cc->mthp_bitmap_mask, HPAGE_PMD_NR);
+	bitmap_set(cc->mthp_bitmap_mask, offset, nr_pte_entries);
+	return bitmap_weight_and(cc->mthp_bitmap, cc->mthp_bitmap_mask, HPAGE_PMD_NR);
+}
+
+/*
+ * mthp_collapse() consumes the bitmap that is generated during
+ * collapse_scan_pmd() to determine what regions and mTHP orders fit best.
+ *
+ * Each bit in cc->mthp_bitmap represents a single occupied (!none/zero) page.
+ * A stack structure cc->mthp_bitmap_stack is used to check different regions
+ * of the bitmap for collapse eligibility. The stack maintains a pair of
+ * variables (offset, order), indicating the number of PTEs from the start of
+ * the PMD, and the order of the potential collapse candidate respectively. We
+ * start at the PMD order and check if it is eligible for collapse; if not, we
+ * add two entries to the stack at a lower order to represent the left and right
+ * halves of the PTE page table we are examining.
+ *
+ *                         offset       mid_offset
+ *                         |         |
+ *                         |         |
+ *                         v         v
+ *      --------------------------------------
+ *      |          cc->mthp_bitmap            |
+ *      --------------------------------------
+ *                         <-------><------->
+ *                          order-1  order-1
+ *
+ * For each of these, we determine how many PTE entries are occupied in the
+ * range of PTE entries we propose to collapse, then we compare this to a
+ * threshold number of PTE entries which would need to be occupied for a
+ * collapse to be permitted at that order (accounting for max_ptes_none).
+
+ * If a collapse is permitted, we attempt to collapse the PTE range into a
+ * mTHP.
+ */
+static int mthp_collapse(struct mm_struct *mm, unsigned long address,
+		int referenced, int unmapped, struct collapse_control *cc,
+		bool *mmap_locked, unsigned long enabled_orders)
+{
+	unsigned int max_ptes_none, nr_occupied_ptes;
+	struct mthp_range range;
+	unsigned long collapse_address;
+	int collapsed = 0, stack_size = 0;
+	unsigned long nr_pte_entries;
+	u16 offset;
+	u8 order;
+
+	mthp_stack_push(cc, &stack_size, 0, HPAGE_PMD_ORDER);
+
+	while (stack_size > 0) {
+		range = mthp_stack_pop(cc, &stack_size);
+		order = range.order;
+		offset = range.offset;
+		nr_pte_entries = 1UL << order;
+
+		if (!test_bit(order, &enabled_orders))
+			goto next_order;
+
+		if (cc->is_khugepaged)
+			max_ptes_none = collapse_max_ptes_none(order);
+		else
+			max_ptes_none = COLLAPSE_MAX_PTES_LIMIT;
+
+		if (max_ptes_none == -EINVAL)
+			return collapsed;
+
+		nr_occupied_ptes = mthp_nr_occupied_pte_entries(cc, offset, nr_pte_entries);
+
+		if (nr_occupied_ptes >= nr_pte_entries - max_ptes_none) {
+			int ret;
+
+			collapse_address = address + offset * PAGE_SIZE;
+			ret = collapse_huge_page(mm, collapse_address, referenced,
+						 unmapped, cc, mmap_locked,
+						 order);
+			if (ret == SCAN_SUCCEED) {
+				collapsed += nr_pte_entries;
+				continue;
+			}
+		}
+
+next_order:
+		if (order > KHUGEPAGED_MIN_MTHP_ORDER) {
+			const u8 next_order = order - 1;
+			const u16 mid_offset = offset + (nr_pte_entries / 2);
+
+			mthp_stack_push(cc, &stack_size, mid_offset, next_order);
+			mthp_stack_push(cc, &stack_size, offset, next_order);
+		}
+	}
+	return collapsed;
+}
+
 static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 		struct vm_area_struct *vma, unsigned long start_addr, bool *mmap_locked,
 		unsigned int *cur_progress, struct collapse_control *cc)
 {
 	pmd_t *pmd;
 	pte_t *pte, *_pte;
-	int none_or_zero = 0, shared = 0, referenced = 0;
+	int i;
+	int none_or_zero = 0, shared = 0, nr_collapsed = 0, referenced = 0;
 	enum scan_result result = SCAN_FAIL;
 	struct page *page = NULL;
+	unsigned int max_ptes_none;
 	struct folio *folio = NULL;
 	unsigned long addr;
+	unsigned long enabled_orders;
 	spinlock_t *ptl;
 	int node = NUMA_NO_NODE, unmapped = 0;
 
@@ -1384,8 +1536,21 @@ static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 		goto out;
 	}
 
+	bitmap_zero(cc->mthp_bitmap, HPAGE_PMD_NR);
 	memset(cc->node_load, 0, sizeof(cc->node_load));
 	nodes_clear(cc->alloc_nmask);
+
+	enabled_orders = collapse_allowable_orders(vma, vma->vm_flags, cc->is_khugepaged);
+
+	/*
+	 * If PMD is the only enabled order, enforce max_ptes_none, otherwise
+	 * scan all pages to populate the bitmap for mTHP collapse.
+	 */
+	if (cc->is_khugepaged && enabled_orders == BIT(HPAGE_PMD_ORDER))
+		max_ptes_none = collapse_max_ptes_none(HPAGE_PMD_ORDER);
+	else
+		max_ptes_none = COLLAPSE_MAX_PTES_LIMIT;
+
 	pte = pte_offset_map_lock(mm, pmd, start_addr, &ptl);
 	if (!pte) {
 		if (cur_progress)
@@ -1394,17 +1559,18 @@ static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 		goto out;
 	}
 
-	for (addr = start_addr, _pte = pte; _pte < pte + HPAGE_PMD_NR;
-	     _pte++, addr += PAGE_SIZE) {
+	for (i = 0; i < HPAGE_PMD_NR; i++) {
+		_pte = pte + i;
+		addr = start_addr + i * PAGE_SIZE;
+		pte_t pteval = ptep_get(_pte);
+
 		if (cur_progress)
 			*cur_progress += 1;
 
-		pte_t pteval = ptep_get(_pte);
 		if (pte_none_or_zero(pteval)) {
 			++none_or_zero;
 			if (!userfaultfd_armed(vma) &&
-			    (!cc->is_khugepaged ||
-			     none_or_zero <= khugepaged_max_ptes_none)) {
+			    none_or_zero <= max_ptes_none) {
 				continue;
 			} else {
 				result = SCAN_EXCEED_NONE_PTE;
@@ -1478,6 +1644,8 @@ static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 			}
 		}
 
+		/* Set bit for occupied pages */
+		bitmap_set(cc->mthp_bitmap, i, 1);
 		/*
 		 * Record which node the original page is from and save this
 		 * information to cc->node_load[].
@@ -1534,9 +1702,12 @@ static enum scan_result collapse_scan_pmd(struct mm_struct *mm,
 out_unmap:
 	pte_unmap_unlock(pte, ptl);
 	if (result == SCAN_SUCCEED) {
-		result = collapse_huge_page(mm, start_addr, referenced,
-					    unmapped, cc, mmap_locked,
-					    HPAGE_PMD_ORDER);
+		nr_collapsed = mthp_collapse(mm, start_addr, referenced, unmapped,
+					      cc, mmap_locked, enabled_orders);
+		if (nr_collapsed > 0)
+			result = SCAN_SUCCEED;
+		else
+			result = SCAN_FAIL;
 	}
 out:
 	trace_mm_khugepaged_scan_pmd(mm, folio, referenced,
-- 
2.53.0

[PATCH mm-unstable v15 11/13] mm/khugepaged: avoid unnecessary mTHP collapse attempts

[Nico Pache]

There are cases where, if an attempted collapse fails, all subsequent
orders are guaranteed to also fail. Avoid these collapse attempts by
bailing out early.

Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 35 ++++++++++++++++++++++++++++++++++-
 1 file changed, 34 insertions(+), 1 deletion(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 1c3711ed4513..388d3f2537e2 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1492,9 +1492,42 @@ static int mthp_collapse(struct mm_struct *mm, unsigned long address,
 			ret = collapse_huge_page(mm, collapse_address, referenced,
 						 unmapped, cc, mmap_locked,
 						 order);
-			if (ret == SCAN_SUCCEED) {
+
+			switch (ret) {
+			/* Cases were we continue to next collapse candidate */
+			case SCAN_SUCCEED:
 				collapsed += nr_pte_entries;
+				fallthrough;
+			case SCAN_PTE_MAPPED_HUGEPAGE:
 				continue;
+			/* Cases were lower orders might still succeed */
+			case SCAN_LACK_REFERENCED_PAGE:
+			case SCAN_EXCEED_NONE_PTE:
+			case SCAN_EXCEED_SWAP_PTE:
+			case SCAN_EXCEED_SHARED_PTE:
+			case SCAN_PAGE_LOCK:
+			case SCAN_PAGE_COUNT:
+			case SCAN_PAGE_LRU:
+			case SCAN_PAGE_NULL:
+			case SCAN_DEL_PAGE_LRU:
+			case SCAN_PTE_NON_PRESENT:
+			case SCAN_PTE_UFFD_WP:
+			case SCAN_ALLOC_HUGE_PAGE_FAIL:
+				goto next_order;
+			/* Cases were no further collapse is possible */
+			case SCAN_CGROUP_CHARGE_FAIL:
+			case SCAN_COPY_MC:
+			case SCAN_ADDRESS_RANGE:
+			case SCAN_NO_PTE_TABLE:
+			case SCAN_ANY_PROCESS:
+			case SCAN_VMA_NULL:
+			case SCAN_VMA_CHECK:
+			case SCAN_SCAN_ABORT:
+			case SCAN_PAGE_ANON:
+			case SCAN_PMD_MAPPED:
+			case SCAN_FAIL:
+			default:
+				return collapsed;
 			}
 		}
 
-- 
2.53.0

[PATCH mm-unstable v15 12/13] mm/khugepaged: run khugepaged for all orders

[Nico Pache]

From: Baolin Wang <baolin.wang@linux.alibaba.com>

If any order (m)THP is enabled we should allow running khugepaged to
attempt scanning and collapsing mTHPs. In order for khugepaged to operate
when only mTHP sizes are specified in sysfs, we must modify the predicate
function that determines whether it ought to run to do so.

This function is currently called hugepage_pmd_enabled(), this patch
renames it to hugepage_enabled() and updates the logic to check to
determine whether any valid orders may exist which would justify
khugepaged running.

We must also update collapse_allowable_orders() to check all orders if
the vma is anonymous and the collapse is khugepaged.

After this patch khugepaged mTHP collapse is fully enabled.

Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 mm/khugepaged.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)

diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 388d3f2537e2..e8bfcc1d0c9a 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -434,23 +434,23 @@ static inline int collapse_test_exit_or_disable(struct mm_struct *mm)
 		mm_flags_test(MMF_DISABLE_THP_COMPLETELY, mm);
 }
 
-static bool hugepage_pmd_enabled(void)
+static bool hugepage_enabled(void)
 {
 	/*
 	 * We cover the anon, shmem and the file-backed case here; file-backed
 	 * hugepages, when configured in, are determined by the global control.
-	 * Anon pmd-sized hugepages are determined by the pmd-size control.
+	 * Anon hugepages are determined by its per-size mTHP control.
 	 * Shmem pmd-sized hugepages are also determined by its pmd-size control,
 	 * except when the global shmem_huge is set to SHMEM_HUGE_DENY.
 	 */
 	if (IS_ENABLED(CONFIG_READ_ONLY_THP_FOR_FS) &&
 	    hugepage_global_enabled())
 		return true;
-	if (test_bit(PMD_ORDER, &huge_anon_orders_always))
+	if (READ_ONCE(huge_anon_orders_always))
 		return true;
-	if (test_bit(PMD_ORDER, &huge_anon_orders_madvise))
+	if (READ_ONCE(huge_anon_orders_madvise))
 		return true;
-	if (test_bit(PMD_ORDER, &huge_anon_orders_inherit) &&
+	if (READ_ONCE(huge_anon_orders_inherit) &&
 	    hugepage_global_enabled())
 		return true;
 	if (IS_ENABLED(CONFIG_SHMEM) && shmem_hpage_pmd_enabled())
@@ -521,8 +521,14 @@ static unsigned int collapse_max_ptes_none(unsigned int order)
 static unsigned long collapse_allowable_orders(struct vm_area_struct *vma,
 			vm_flags_t vm_flags, bool is_khugepaged)
 {
+	unsigned long orders;
 	enum tva_type tva_flags = is_khugepaged ? TVA_KHUGEPAGED : TVA_FORCED_COLLAPSE;
-	unsigned long orders = BIT(HPAGE_PMD_ORDER);
+
+	/* If khugepaged is scanning an anonymous vma, allow mTHP collapse */
+	if (is_khugepaged && vma_is_anonymous(vma))
+		orders = THP_ORDERS_ALL_ANON;
+	else
+		orders = BIT(HPAGE_PMD_ORDER);
 
 	return thp_vma_allowable_orders(vma, vm_flags, tva_flags, orders);
 }
@@ -531,7 +537,7 @@ void khugepaged_enter_vma(struct vm_area_struct *vma,
 			  vm_flags_t vm_flags)
 {
 	if (!mm_flags_test(MMF_VM_HUGEPAGE, vma->vm_mm) &&
-	    hugepage_pmd_enabled()) {
+	    hugepage_enabled()) {
 		if (collapse_allowable_orders(vma, vm_flags, /*is_khugepaged=*/true))
 			__khugepaged_enter(vma->vm_mm);
 	}
@@ -2929,7 +2935,7 @@ static unsigned int collapse_scan_mm_slot(unsigned int pages, enum scan_result *
 
 static int khugepaged_has_work(void)
 {
-	return !list_empty(&khugepaged_scan.mm_head) && hugepage_pmd_enabled();
+	return !list_empty(&khugepaged_scan.mm_head) && hugepage_enabled();
 }
 
 static int khugepaged_wait_event(void)
@@ -3002,7 +3008,7 @@ static void khugepaged_wait_work(void)
 		return;
 	}
 
-	if (hugepage_pmd_enabled())
+	if (hugepage_enabled())
 		wait_event_freezable(khugepaged_wait, khugepaged_wait_event());
 }
 
@@ -3033,7 +3039,7 @@ static void set_recommended_min_free_kbytes(void)
 	int nr_zones = 0;
 	unsigned long recommended_min;
 
-	if (!hugepage_pmd_enabled()) {
+	if (!hugepage_enabled()) {
 		calculate_min_free_kbytes();
 		goto update_wmarks;
 	}
@@ -3083,7 +3089,7 @@ int start_stop_khugepaged(void)
 	int err = 0;
 
 	mutex_lock(&khugepaged_mutex);
-	if (hugepage_pmd_enabled()) {
+	if (hugepage_enabled()) {
 		if (!khugepaged_thread)
 			khugepaged_thread = kthread_run(khugepaged, NULL,
 							"khugepaged");
@@ -3109,7 +3115,7 @@ int start_stop_khugepaged(void)
 void khugepaged_min_free_kbytes_update(void)
 {
 	mutex_lock(&khugepaged_mutex);
-	if (hugepage_pmd_enabled() && khugepaged_thread)
+	if (hugepage_enabled() && khugepaged_thread)
 		set_recommended_min_free_kbytes();
 	mutex_unlock(&khugepaged_mutex);
 }
-- 
2.53.0

[PATCH mm-unstable v15 13/13] Documentation: mm: update the admin guide for mTHP collapse

[Nico Pache]

Now that we can collapse to mTHPs lets update the admin guide to
reflect these changes and provide proper guidance on how to utilize it.

Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Nico Pache <npache@redhat.com>
---
 Documentation/admin-guide/mm/transhuge.rst | 48 +++++++++++++---------
 1 file changed, 28 insertions(+), 20 deletions(-)

diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
index eebb1f6bbc6c..67836c683e8d 100644
--- a/Documentation/admin-guide/mm/transhuge.rst
+++ b/Documentation/admin-guide/mm/transhuge.rst
@@ -63,7 +63,8 @@ often.
 THP can be enabled system wide or restricted to certain tasks or even
 memory ranges inside task's address space. Unless THP is completely
 disabled, there is ``khugepaged`` daemon that scans memory and
-collapses sequences of basic pages into PMD-sized huge pages.
+collapses sequences of basic pages into huge pages of either PMD size
+or mTHP sizes, if the system is configured to do so.
 
 The THP behaviour is controlled via :ref:`sysfs <thp_sysfs>`
 interface and using madvise(2) and prctl(2) system calls.
@@ -219,10 +220,10 @@ this behaviour by writing 0 to shrink_underused, and enable it by writing
 	echo 0 > /sys/kernel/mm/transparent_hugepage/shrink_underused
 	echo 1 > /sys/kernel/mm/transparent_hugepage/shrink_underused
 
-khugepaged will be automatically started when PMD-sized THP is enabled
+khugepaged will be automatically started when any THP size is enabled
 (either of the per-size anon control or the top-level control are set
 to "always" or "madvise"), and it'll be automatically shutdown when
-PMD-sized THP is disabled (when both the per-size anon control and the
+all THP sizes are disabled (when both the per-size anon control and the
 top-level control are "never")
 
 process THP controls
@@ -264,11 +265,6 @@ support the following arguments::
 Khugepaged controls
 -------------------
 
-.. note::
-   khugepaged currently only searches for opportunities to collapse to
-   PMD-sized THP and no attempt is made to collapse to other THP
-   sizes.
-
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
@@ -296,11 +292,11 @@ allocation failure to throttle the next allocation attempt::
 The khugepaged progress can be seen in the number of pages collapsed (note
 that this counter may not be an exact count of the number of pages
 collapsed, since "collapsed" could mean multiple things: (1) A PTE mapping
-being replaced by a PMD mapping, or (2) All 4K physical pages replaced by
-one 2M hugepage. Each may happen independently, or together, depending on
-the type of memory and the failures that occur. As such, this value should
-be interpreted roughly as a sign of progress, and counters in /proc/vmstat
-consulted for more accurate accounting)::
+being replaced by a PMD mapping, or (2) physical pages replaced by one
+hugepage of various sizes (PMD-sized or mTHP). Each may happen independently,
+or together, depending on the type of memory and the failures that occur.
+As such, this value should be interpreted roughly as a sign of progress,
+and counters in /proc/vmstat consulted for more accurate accounting)::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/pages_collapsed
 
@@ -308,16 +304,19 @@ for each pass::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/full_scans
 
-``max_ptes_none`` specifies how many extra small pages (that are
-not already mapped) can be allocated when collapsing a group
-of small pages into one large page::
+``max_ptes_none`` specifies how many empty (none/zero) pages are allowed
+when collapsing a group of small pages into one large page::
 
 	/sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
 
-A higher value leads to use additional memory for programs.
-A lower value leads to gain less thp performance. Value of
-max_ptes_none can waste cpu time very little, you can
-ignore it.
+For PMD-sized THP collapse, this directly limits the number of empty pages
+allowed in the 2MB region. For mTHP collapse, only 0 or (HPAGE_PMD_NR - 1)
+are supported. Any other value will emit a warning and no mTHP collapse
+will be attempted.
+
+A higher value allows more empty pages, potentially leading to more memory
+usage but better THP performance. A lower value is more conservative and
+may result in fewer THP collapses.
 
 ``max_ptes_swap`` specifies how many pages can be brought in from
 swap when collapsing a group of pages into a transparent huge page::
@@ -337,6 +336,15 @@ that THP is shared. Exceeding the number would block the collapse::
 
 A higher value may increase memory footprint for some workloads.
 
+.. note::
+   For mTHP collapse, khugepaged does not support collapsing regions that
+   contain shared or swapped out pages, as this could lead to continuous
+   promotion to higher orders. The collapse will fail if any shared or
+   swapped PTEs are encountered during the scan.
+
+   Currently, madvise_collapse only supports collapsing to PMD-sized THPs
+   and does not attempt mTHP collapses.
+
 Boot parameters
 ===============
 
-- 
2.53.0

Re: [PATCH mm-unstable v15 12/13] mm/khugepaged: run khugepaged for all orders

[Usama Arif]

On Wed, 25 Feb 2026 20:26:50 -0700 Nico Pache <npache@redhat.com> wrote:

> From: Baolin Wang <baolin.wang@linux.alibaba.com>
> 
> If any order (m)THP is enabled we should allow running khugepaged to
> attempt scanning and collapsing mTHPs. In order for khugepaged to operate
> when only mTHP sizes are specified in sysfs, we must modify the predicate
> function that determines whether it ought to run to do so.
> 
> This function is currently called hugepage_pmd_enabled(), this patch
> renames it to hugepage_enabled() and updates the logic to check to
> determine whether any valid orders may exist which would justify
> khugepaged running.
> 
> We must also update collapse_allowable_orders() to check all orders if
> the vma is anonymous and the collapse is khugepaged.
> 
> After this patch khugepaged mTHP collapse is fully enabled.
> 
> Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
> Signed-off-by: Nico Pache <npache@redhat.com>
> ---
>  mm/khugepaged.c | 30 ++++++++++++++++++------------
>  1 file changed, 18 insertions(+), 12 deletions(-)
> 

Acked-by: Usama Arif <usama.arif@linux.dev>

Re: [PATCH mm-unstable v15 11/13] mm/khugepaged: avoid unnecessary mTHP collapse attempts

[Usama Arif]

On Wed, 25 Feb 2026 20:26:31 -0700 Nico Pache <npache@redhat.com> wrote:

> There are cases where, if an attempted collapse fails, all subsequent
> orders are guaranteed to also fail. Avoid these collapse attempts by
> bailing out early.
> 
> Signed-off-by: Nico Pache <npache@redhat.com>
> ---
>  mm/khugepaged.c | 35 ++++++++++++++++++++++++++++++++++-
>  1 file changed, 34 insertions(+), 1 deletion(-)
> 
> diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> index 1c3711ed4513..388d3f2537e2 100644
> --- a/mm/khugepaged.c
> +++ b/mm/khugepaged.c
> @@ -1492,9 +1492,42 @@ static int mthp_collapse(struct mm_struct *mm, unsigned long address,
>  			ret = collapse_huge_page(mm, collapse_address, referenced,
>  						 unmapped, cc, mmap_locked,
>  						 order);
> -			if (ret == SCAN_SUCCEED) {
> +
> +			switch (ret) {
> +			/* Cases were we continue to next collapse candidate */
> +			case SCAN_SUCCEED:
>  				collapsed += nr_pte_entries;
> +				fallthrough;
> +			case SCAN_PTE_MAPPED_HUGEPAGE:
>  				continue;
> +			/* Cases were lower orders might still succeed */
> +			case SCAN_LACK_REFERENCED_PAGE:
> +			case SCAN_EXCEED_NONE_PTE:
> +			case SCAN_EXCEED_SWAP_PTE:
> +			case SCAN_EXCEED_SHARED_PTE:
> +			case SCAN_PAGE_LOCK:
> +			case SCAN_PAGE_COUNT:
> +			case SCAN_PAGE_LRU:
> +			case SCAN_PAGE_NULL:
> +			case SCAN_DEL_PAGE_LRU:
> +			case SCAN_PTE_NON_PRESENT:
> +			case SCAN_PTE_UFFD_WP:
> +			case SCAN_ALLOC_HUGE_PAGE_FAIL:
> +				goto next_order;
> +			/* Cases were no further collapse is possible */
> +			case SCAN_CGROUP_CHARGE_FAIL:

The only one that stands out to me is SCAN_CGROUP_CHARGE_FAIL. memcg charging
of higher order folio might fail, but a lower order folio might pass?
That said, if the cgroup is that tight, continuing collapse work may not
be productive.

Acked-by: Usama Arif <usama.arif@linux.dev>

> +			case SCAN_COPY_MC:
> +			case SCAN_ADDRESS_RANGE:
> +			case SCAN_NO_PTE_TABLE:
> +			case SCAN_ANY_PROCESS:
> +			case SCAN_VMA_NULL:
> +			case SCAN_VMA_CHECK:
> +			case SCAN_SCAN_ABORT:
> +			case SCAN_PAGE_ANON:
> +			case SCAN_PMD_MAPPED:
> +			case SCAN_FAIL:
> +			default:
> +				return collapsed;
>  			}
>  		}
>  
> -- 
> 2.53.0
> 
> 

Re: [PATCH mm-unstable v15 11/13] mm/khugepaged: avoid unnecessary mTHP collapse attempts

[Nico Pache]

On Thu, Feb 26, 2026 at 9:27 AM Usama Arif <usama.arif@linux.dev> wrote:
>
> On Wed, 25 Feb 2026 20:26:31 -0700 Nico Pache <npache@redhat.com> wrote:
>
> > There are cases where, if an attempted collapse fails, all subsequent
> > orders are guaranteed to also fail. Avoid these collapse attempts by
> > bailing out early.
> >
> > Signed-off-by: Nico Pache <npache@redhat.com>
> > ---
> >  mm/khugepaged.c | 35 ++++++++++++++++++++++++++++++++++-
> >  1 file changed, 34 insertions(+), 1 deletion(-)
> >
> > diff --git a/mm/khugepaged.c b/mm/khugepaged.c
> > index 1c3711ed4513..388d3f2537e2 100644
> > --- a/mm/khugepaged.c
> > +++ b/mm/khugepaged.c
> > @@ -1492,9 +1492,42 @@ static int mthp_collapse(struct mm_struct *mm, unsigned long address,
> >                       ret = collapse_huge_page(mm, collapse_address, referenced,
> >                                                unmapped, cc, mmap_locked,
> >                                                order);
> > -                     if (ret == SCAN_SUCCEED) {
> > +
> > +                     switch (ret) {
> > +                     /* Cases were we continue to next collapse candidate */
> > +                     case SCAN_SUCCEED:
> >                               collapsed += nr_pte_entries;
> > +                             fallthrough;
> > +                     case SCAN_PTE_MAPPED_HUGEPAGE:
> >                               continue;
> > +                     /* Cases were lower orders might still succeed */
> > +                     case SCAN_LACK_REFERENCED_PAGE:
> > +                     case SCAN_EXCEED_NONE_PTE:
> > +                     case SCAN_EXCEED_SWAP_PTE:
> > +                     case SCAN_EXCEED_SHARED_PTE:
> > +                     case SCAN_PAGE_LOCK:
> > +                     case SCAN_PAGE_COUNT:
> > +                     case SCAN_PAGE_LRU:
> > +                     case SCAN_PAGE_NULL:
> > +                     case SCAN_DEL_PAGE_LRU:
> > +                     case SCAN_PTE_NON_PRESENT:
> > +                     case SCAN_PTE_UFFD_WP:
> > +                     case SCAN_ALLOC_HUGE_PAGE_FAIL:
> > +                             goto next_order;
> > +                     /* Cases were no further collapse is possible */
> > +                     case SCAN_CGROUP_CHARGE_FAIL:
>
> The only one that stands out to me is SCAN_CGROUP_CHARGE_FAIL. memcg charging
> of higher order folio might fail, but a lower order folio might pass?
> That said, if the cgroup is that tight, continuing collapse work may not
> be productive.
>
> Acked-by: Usama Arif <usama.arif@linux.dev>

Thanks! IIRC, David and I discussed all of these off chain to confirm
their placement. I had this in the 'next_order' case at some point and
David recommended it to "fail" for the same reason you state here:
collapsing or charging large order pages in such a tight cgroup is
likely unproductive and not worth the effort.

In contrast, SCAN_ALLOC_HUGE_PAGE_FAIL does not necessarily indicate a
resource constraint, but it could. We might fail to allocate an N-page
size due to fragmentation, but we could easily find an (N-1) size. We
could also have a scenario where a lack of memory causes the failure,
iterating all the way down, which would be unproductive. However, at
that point the OOM reaper should be active and the system will already
be cornered in multiple ways, so it should be ok.

Hopefully that gives some insight into the decisions made here :)

Cheers,
-- Nico

>
> > +                     case SCAN_COPY_MC:
> > +                     case SCAN_ADDRESS_RANGE:
> > +                     case SCAN_NO_PTE_TABLE:
> > +                     case SCAN_ANY_PROCESS:
> > +                     case SCAN_VMA_NULL:
> > +                     case SCAN_VMA_CHECK:
> > +                     case SCAN_SCAN_ABORT:
> > +                     case SCAN_PAGE_ANON:
> > +                     case SCAN_PMD_MAPPED:
> > +                     case SCAN_FAIL:
> > +                     default:
> > +                             return collapsed;
> >                       }
> >               }
> >
> > --
> > 2.53.0
> >
> >
>