* Re: [PATCH 6.6 00/76] 6.6.85-rc2 review
[not found] <20250326154346.820929475@linuxfoundation.org>
@ 2025-03-28 11:44 ` Naresh Kamboju
2025-03-28 14:42 ` Naresh Kamboju
0 siblings, 1 reply; 3+ messages in thread
From: Naresh Kamboju @ 2025-03-28 11:44 UTC (permalink / raw)
To: Greg Kroah-Hartman
Cc: stable, patches, linux-kernel, torvalds, akpm, linux, shuah,
patches, lkft-triage, pavel, jonathanh, f.fainelli,
sudipm.mukherjee, srw, rwarsow, conor, hargar, broonie,
Johannes Weiner, Michal Hocko, Roman Gushchin, Cgroups, linux-mm,
Shakeel Butt
On Wed, 26 Mar 2025 at 21:16, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 6.6.85 release.
> There are 76 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri, 28 Mar 2025 15:43:33 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.85-rc2.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Regressions on arm64 devices cpu hotplug tests failed with gcc-13 and
clang-20 the stable-rc 6.6.85-rc2
These regressions are the same as stable-rc 6.1 cpu hotplug regressions.
First seen on the 6.6.85-rc2
Good: v6.6.83
Bad: 6.6.85-rc2
* dragonboard 845c
- selftests: cpu-hotplug: cpu-on-off-test.sh
- rseq_basic_percpu_ops_mm_cid_test
- rseq_basic_percpu_ops_test
- ltp-controllers: cpuset_hotplug_test.sh
Regression Analysis:
- New regression? yes
- Reproducibility? Yes
Test regression: arm64 arm cpuhotplug kernel NULL pointer dereference
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
## Test log
command: cpuset_hotplug_test.sh
cpuset_hotplug 1 TINFO: CPUs are numbered continuously starting at 0 (0-7)
cpuset_hotplug 1 TINFO: Nodes are numbered continuously starting at 0 (0)
[ 607.606520] IRQ118: set affinity failed(-22).
[ 607.606657] IRQ165: set affinity failed(-22).
[ 607.606670] IRQ167: set affinity failed(-22).
[ 607.606764] IRQ206: set affinity failed(-22).
[ 607.606775] IRQ207: set affinity failed(-22).
[ 607.606786] IRQ208: set affinity failed(-22).
[ 607.606797] IRQ209: set affinity failed(-22).
[ 607.606807] IRQ210: set affinity failed(-22).
[ 607.606816] IRQ211: set affinity failed(-22).
[ 607.606825] IRQ212: set affinity failed(-22).
[ 607.610148] psci: CPU1 killed (polled 0 ms)
cpuset_hotplug 1 TPASS: Cpuset vs CPU hotplug test succeeded.
[ 608.845868] Detected VIPT I-cache on CPU1
[ 608.845955] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[ 608.846049] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
[ 609.103460] psci: CPU1 killed (polled 0 ms)
[ 609.149280] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[ 609.162506] Mem abort info:
[ 609.170513] ESR = 0x0000000096000004
[ 609.177143] EC = 0x25: DABT (current EL), IL = 32 bits
[ 609.184803] SET = 0, FnV = 0
[ 609.190745] EA = 0, S1PTW = 0
[ 609.196414] FSC = 0x04: level 0 translation fault
[ 609.202957] Data abort info:
[ 609.208001] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 609.215282] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 609.221926] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 609.229042] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000108ec5000
[ 609.238062] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 609.246582] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 609.254427] Modules linked in: ax88179_178a usbnet fuse ip_tables
x_tables snd_soc_hdmi_codec venus_enc venus_dec videobuf2_dma_contig
mcp251xfd xhci_pci xhci_pci_renesas lontium_lt9611 can_dev qcom_pon
qcom_spmi_adc5 snd_soc_sdm845 rtc_pm8xxx ath10k_snoc leds_qcom_lpg
snd_soc_rt5663 qcom_vadc_common venus_core ath10k_core
snd_soc_qcom_common snd_soc_rl6231 led_class_multicolor
qcom_spmi_temp_alarm ath crct10dif_ce qcom_stats v4l2_mem2mem
soundwire_bus msm qcom_camss videobuf2_dma_sg videobuf2_v4l2
videobuf2_memops mac80211 ocmem hci_uart gpu_sched phy_qcom_qmp_combo
btqca drm_dp_aux_bus btbcm reset_qcom_pdc drm_display_helper
camcc_sdm845 bluetooth qcom_q6v5_mss spi_geni_qcom i2c_qcom_geni typec
gpi videobuf2_common qcom_rng phy_qcom_qmp_usb coresight_stm stm_core
qrtr qcrypto cfg80211 qcom_q6v5_pas ufs_qcom phy_qcom_qmp_ufs
phy_qcom_qmp_pcie lmh rfkill slim_qcom_ngd_ctrl icc_osm_l3
qcom_pil_info slimbus qcom_wdt qcom_q6v5 pdr_interface
display_connector llcc_qcom drm_kms_helper qcom_sysmon qcom_common
[ 609.254673] qcom_glink_smem mdt_loader icc_bwmon drm qmi_helpers
socinfo backlight rmtfs_mem
[ 609.364260] CPU: 0 PID: 388 Comm: kworker/0:3 Not tainted 6.6.85-rc2 #1
[ 609.373013] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 609.380818] Workqueue: events work_for_cpu_fn
[ 609.387320] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 609.396471] pc : memcg_hotplug_cpu_dead
(include/linux/percpu-refcount.h:174
include/linux/percpu-refcount.h:332
include/linux/percpu-refcount.h:351 include/linux/memcontrol.h:809
mm/memcontrol.c:2392)
[ 609.403452] lr : memcg_hotplug_cpu_dead
(include/linux/percpu-refcount.h:174
include/linux/percpu-refcount.h:332
include/linux/percpu-refcount.h:351 include/linux/memcontrol.h:809
mm/memcontrol.c:2392)
[ 609.410429] sp : ffff80008107bc50
[ 609.415903] x29: ffff80008107bc50 x28: 0000000000000000 x27: ffffad8428896ad8
[ 609.425251] x26: 0000000000000028 x25: ffff60fdbd4a1a58 x24: ffffad842887eb00
[ 609.434605] x23: 0000000000000000 x22: ffffad84288329c0 x21: 0000000000000000
[ 609.443957] x20: ffffb37994c7e000 x19: 0000000000000000 x18: 00000000b8fbaf46
[ 609.453329] x17: 0000000000000000 x16: 000000000000030d x15: 0000000000000049
[ 609.462707] x14: 0000000000000197 x13: ffff800081078000 x12: ffff80008107c000
[ 609.472102] x11: abc96095bed38f00 x10: 0000000000000000 x9 : 0000000000000001
[ 609.481495] x8 : ffff60fd47b4d280 x7 : 000000f2b5503510 x6 : 0000000000300000
[ 609.490872] x5 : 00000000801c0011 x4 : 0000000000000000 x3 : ffff80008107bc00
[ 609.500269] x2 : ffff60fd47b4d280 x1 : ffffad84264a670c x0 : ffff60fdbd4b09c0
[ 609.509655] Call trace:
[ 609.514295] memcg_hotplug_cpu_dead
(include/linux/percpu-refcount.h:174
include/linux/percpu-refcount.h:332
include/linux/percpu-refcount.h:351 include/linux/memcontrol.h:809
mm/memcontrol.c:2392)
[ 609.520968] cpuhp_invoke_callback (kernel/cpu.c:196)
[ 609.527648] _cpu_down (kernel/cpu.c:0 kernel/cpu.c:980
kernel/cpu.c:1415 kernel/cpu.c:1476)
[ 609.533283] __cpu_down_maps_locked (kernel/cpu.c:1507)
[ 609.539889] work_for_cpu_fn (kernel/workqueue.c:5644)
[ 609.545882] process_scheduled_works (kernel/workqueue.c:2639
kernel/workqueue.c:2711)
[ 609.552752] worker_thread (include/linux/list.h:373
kernel/workqueue.c:841 kernel/workqueue.c:2793)
[ 609.558741] kthread (kernel/kthread.c:390)
[ 609.564193] ret_from_fork (arch/arm64/kernel/entry.S:862)
[ 609.570006] Code: d51b4235 8b160280 97ffebe0 97f694b5 (f9400269)
All code
========
Code starting with the faulting instruction
===========================================
[ 609.578382] ---[ end trace 0000000000000000 ]---
## Test log 2
kselftest: Running tests in rseq
TAP version 13
1..9
# timeout set to 0
# selftests: rseq: basic_test
# testing current cpu
# basic_test: basic_test.c:30: test_cpu_pointer: Assertion
`sched_getcpu() == i' failed.
# Aborted
not ok 1 selftests: rseq: basic_test # exit=134
# timeout set to 0
# selftests: rseq: basic_percpu_ops_test
# spinlock
# Segmentation fault
not ok 2 selftests: rseq: basic_percpu_ops_test # exit=139
# timeout set to 0
# selftests: rseq: basic_percpu_ops_mm_cid_test
# spinlock
# Segmentation fault
not ok 3 selftests: rseq: basic_percpu_ops_mm_cid_test # exit=139
## Source
* Kernel version: 6.6.85-rc2
* Git tree: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* Git sha: 0bf29b955eacbaba63be87642f2b48f8a7c45055
* Git describe: v6.6.83-244-g0bf29b955eac
* Project details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-244-g0bf29b955eac
## Test
* Test log: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-244-g0bf29b955eac/testrun/27798819/suite/log-parser-test/test/internal-error-oops-oops-preempt-smp-ada4e7ef482d5d7749a545db62c1f4c97ae5ba4633a23ce654828f2d2e816088/log
* Test history:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-244-g0bf29b955eac/testrun/27798819/suite/log-parser-test/test/internal-error-oops-oops-preempt-smp-ada4e7ef482d5d7749a545db62c1f4c97ae5ba4633a23ce654828f2d2e816088/history/
* Test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.83-244-g0bf29b955eac/testrun/27798819/suite/log-parser-test/test/internal-error-oops-oops-preempt-smp-ada4e7ef482d5d7749a545db62c1f4c97ae5ba4633a23ce654828f2d2e816088/
* Test link: https://storage.tuxsuite.com/public/linaro/lkft/builds/2urSrAikljwhAncEhDz6bSva1iJ/
* Kernel config:
https://storage.tuxsuite.com/public/linaro/lkft/builds/2urSrAikljwhAncEhDz6bSva1iJ/config
--
Linaro LKFT
https://lkft.linaro.org
^ permalink raw reply [flat|nested] 3+ messages in thread