From: Jijiagang <jijiagang@hisilicon.com>
To: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Hujianyang <hujianyang@huawei.com>,
"dedekind1@gmail.com" <dedekind1@gmail.com>,
Caizhiyong <caizhiyong@hisilicon.com>,
"linux-fsdevel@vger.kernel.org" <linux-fsdevel@vger.kernel.org>,
"linux-mm@kvack.org" <linux-mm@kvack.org>,
"Wanli (welly)" <welly.wan@hisilicon.com>,
"linux-mtd@lists.infradead.org" <linux-mtd@lists.infradead.org>,
"adrian.hunter@intel.com" <adrian.hunter@intel.com>
Subject: RE: UBIFS assert failed in ubifs_set_page_dirty at 1421
Date: Mon, 24 Nov 2014 10:20:59 +0000 [thread overview]
Message-ID: <BE257DAADD2C0D439647A27133296657394A75F1@SZXEMA511-MBS.china.huawei.com> (raw)
In-Reply-To: <20141124091024.GA1190@node.dhcp.inet.fi>
Hi Kirill,
I test your patch, bus there's no dump_vma definition.
The log is here, hope it will be helpful.
page:817fd7e0 count:3 mapcount:1 mapping:a318bb8c index:0x4
page flags: 0xa19(locked|uptodate|dirty|arch_1|private)
pte_write: 1
page:81441a80 count:3 mapcount:1 mapping:a318bb8c index:0x5
page flags: 0x209(locked|uptodate|arch_1)
pte_write: 1
UBIFS assert failed in ubifs_set_page_dirty at 1422 (pid 545)
CPU: 2 PID: 545 Comm: kswapd0 Tainted: P O 3.10.0_s40 #19
[<8001d8a0>] (unwind_backtrace+0x0/0x108) from [<80019f44>] (show_stack+0x20/0x24)
[<80019f44>] (show_stack+0x20/0x24) from [<80acfa18>] (dump_stack+0x24/0x2c)
[<80acfa18>] (dump_stack+0x24/0x2c) from [<8029766c>] (ubifs_set_page_dirty+0x54/0x5c)
[<8029766c>] (ubifs_set_page_dirty+0x54/0x5c) from [<800cea60>] (set_page_dirty+0x50/0x78)
[<800cea60>] (set_page_dirty+0x50/0x78) from [<800f4b10>] (try_to_unmap_one+0x124/0x410)
[<800f4b10>] (try_to_unmap_one+0x124/0x410) from [<800f4f84>] (try_to_unmap_file+0x9c/0x740)
[<800f4f84>] (try_to_unmap_file+0x9c/0x740) from [<800f56b8>] (try_to_unmap+0x40/0x78)
[<800f56b8>] (try_to_unmap+0x40/0x78) from [<800d6a04>] (shrink_page_list+0x23c/0x884)
[<800d6a04>] (shrink_page_list+0x23c/0x884) from [<800d76c8>] (shrink_inactive_list+0x21c/0x3c8)
[<800d76c8>] (shrink_inactive_list+0x21c/0x3c8) from [<800d7c20>] (shrink_lruvec+0x3ac/0x524)
[<800d7c20>] (shrink_lruvec+0x3ac/0x524) from [<800d8970>] (kswapd+0x854/0xdc0)
[<800d8970>] (kswapd+0x854/0xdc0) from [<80051e28>] (kthread+0xc8/0xcc)
[<80051e28>] (kthread+0xc8/0xcc) from [<80015198>] (ret_from_fork+0x14/0x20)
UBIFS assert failed in ubifs_release_budget at 567 (pid 6)
CPU: 3 PID: 6 Comm: kworker/u8:0 Tainted: P O 3.10.0_s40 #19
> -----Original Message-----
> From: Kirill A. Shutemov [mailto:kirill@shutemov.name]
> Sent: Monday, November 24, 2014 5:10 PM
> To: Jijiagang
> Cc: Hujianyang; dedekind1@gmail.com; Caizhiyong;
> linux-fsdevel@vger.kernel.org; linux-mm@kvack.org; Wanli (welly);
> linux-mtd@lists.infradead.org; adrian.hunter@intel.com
> Subject: Re: UBIFS assert failed in ubifs_set_page_dirty at 1421
>
> On Mon, Nov 24, 2014 at 02:59:51AM +0000, Jijiagang wrote:
> > Hi Kirill,
> >
> > I add dump_page(page) in function ubifs_set_page_dirty.
> > And get this log when ubifs assert fail. Is it helpful for this problem?
>
> Not really. It seems you called dump_page() after
> __set_page_dirty_nobuffers() in ubifs_set_page_dirty().
>
> Could you try something like patch below. It assumes ubifs to compiled in (not
> module).
>
> diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index b5b593c45270..7b4386dd174e
> 100644
> --- a/fs/ubifs/file.c
> +++ b/fs/ubifs/file.c
> @@ -1531,7 +1531,7 @@ out_unlock:
> return err;
> }
>
> -static const struct vm_operations_struct ubifs_file_vm_ops = {
> +const struct vm_operations_struct ubifs_file_vm_ops = {
> .fault = filemap_fault,
> .map_pages = filemap_map_pages,
> .page_mkwrite = ubifs_vm_page_mkwrite, diff --git a/mm/rmap.c
> b/mm/rmap.c index 19886fb2f13a..343c4571df68 100644
> --- a/mm/rmap.c
> +++ b/mm/rmap.c
> @@ -1171,8 +1171,15 @@ static int try_to_unmap_one(struct page *page,
> struct vm_area_struct *vma,
> pteval = ptep_clear_flush(vma, address, pte);
>
> /* Move the dirty bit to the physical page now the pte is gone. */
> - if (pte_dirty(pteval))
> + if (pte_dirty(pteval)) {
> + extern const struct vm_operations_struct
> ubifs_file_vm_ops;
> + if (vma->vm_ops == &ubifs_file_vm_ops) {
> + dump_vma(vma);
> + dump_page(page, __func__);
> + pr_emerg("pte_write: %d\n", pte_write(pteval));
> + }
> set_page_dirty(page);
> + }
>
> /* Update high watermark before we lower rss */
> update_hiwater_rss(mm);
> --
> Kirill A. Shutemov
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-11-24 10:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <BE257DAADD2C0D439647A271332966573949EFEC@SZXEMA511-MBS.china.huawei.com>
[not found] ` <1413805935.7906.225.camel@sauron.fi.intel.com>
[not found] ` <C3050A4DBA34F345975765E43127F10F62CC5D9B@SZXEMA512-MBX.china.huawei.com>
2014-10-20 13:11 ` Artem Bityutskiy
2014-10-21 2:30 ` Jijiagang
2014-10-21 3:38 ` Dave Chinner
2014-10-21 8:41 ` Jijiagang
2014-11-06 8:28 ` Jijiagang
2014-11-07 2:22 ` hujianyang
2014-11-20 12:30 ` Kirill A. Shutemov
2014-11-24 2:59 ` Jijiagang
2014-11-24 9:10 ` Kirill A. Shutemov
2014-11-24 10:20 ` Jijiagang [this message]
2014-11-24 13:27 ` Kirill A. Shutemov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BE257DAADD2C0D439647A27133296657394A75F1@SZXEMA511-MBS.china.huawei.com \
--to=jijiagang@hisilicon.com \
--cc=adrian.hunter@intel.com \
--cc=caizhiyong@hisilicon.com \
--cc=dedekind1@gmail.com \
--cc=hujianyang@huawei.com \
--cc=kirill@shutemov.name \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-mtd@lists.infradead.org \
--cc=welly.wan@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox