linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Ryan Roberts <ryan.roberts@arm.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Anshuman Khandual <anshuman.khandual@arm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Zi Yan <zi.yan@cs.rutgers.edu>,
	"Aneesh Kumar K.V" <aneesh.kumar@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: [PATCH v2] arm64/mm: pmd_mkinvalid() must handle swap pmds
Date: Wed, 1 May 2024 12:35:35 +0100	[thread overview]
Message-ID: <9fb15315-6317-4bf4-a736-a8a44288b0c2@arm.com> (raw)
In-Reply-To: <20240430133138.732088-1-ryan.roberts@arm.com>

Zi Yan, I'm hoping you might have some input on the below...


On 30/04/2024 14:31, Ryan Roberts wrote:
> __split_huge_pmd_locked() can be called for a present THP, devmap or
> (non-present) migration entry. It calls pmdp_invalidate()
> unconditionally on the pmdp and only determines if it is present or not
> based on the returned old pmd.
> 
> But arm64's pmd_mkinvalid(), called by pmdp_invalidate(),
> unconditionally sets the PMD_PRESENT_INVALID flag, which causes future
> pmd_present() calls to return true - even for a swap pmd. Therefore any
> lockless pgtable walker could see the migration entry pmd in this state
> and start interpretting the fields (e.g. pmd_pfn()) as if it were
> present, leading to BadThings (TM). GUP-fast appears to be one such
> lockless pgtable walker.
> 
> While the obvious fix is for core-mm to avoid such calls for non-present
> pmds (pmdp_invalidate() will also issue TLBI which is not necessary for
> this case either), all other arches that implement pmd_mkinvalid() do it
> in such a way that it is robust to being called with a non-present pmd.

OK the plot thickens; The tests I wrote to check that pmd_mkinvalid() is safe for swap entries fails on x86_64. See below...

> So it is simpler and safer to make arm64 robust too. This approach means
> we can even add tests to debug_vm_pgtable.c to validate the required
> behaviour.
> 
> This is a theoretical bug found during code review. I don't have any
> test case to trigger it in practice.
> 
> Cc: stable@vger.kernel.org
> Fixes: 53fa117bb33c ("arm64/mm: Enable THP migration")
> Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
> ---
> 
> Hi all,
> 
> v1 of this fix [1] took the approach of fixing core-mm to never call
> pmdp_invalidate() on a non-present pmd. But Zi Yan highlighted that only arm64
> suffers this problem; all other arches are robust. So his suggestion was to
> instead make arm64 robust in the same way and add tests to validate it. Despite
> my stated reservations in the context of the v1 discussion, having thought on it
> for a bit, I now agree with Zi Yan. Hence this post.
> 
> Andrew has v1 in mm-unstable at the moment, so probably the best thing to do is
> remove it from there and have this go in through the arm64 tree? Assuming there
> is agreement that this approach is right one.
> 
> This applies on top of v6.9-rc5. Passes all the mm selftests on arm64.
> 
> [1] https://lore.kernel.org/linux-mm/20240425170704.3379492-1-ryan.roberts@arm.com/
> 
> Thanks,
> Ryan
> 
> 
>  arch/arm64/include/asm/pgtable.h | 12 +++++--
>  mm/debug_vm_pgtable.c            | 61 ++++++++++++++++++++++++++++++++
>  2 files changed, 71 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
> index afdd56d26ad7..7d580271a46d 100644
> --- a/arch/arm64/include/asm/pgtable.h
> +++ b/arch/arm64/include/asm/pgtable.h
> @@ -511,8 +511,16 @@ static inline int pmd_trans_huge(pmd_t pmd)
> 
>  static inline pmd_t pmd_mkinvalid(pmd_t pmd)
>  {
> -	pmd = set_pmd_bit(pmd, __pgprot(PMD_PRESENT_INVALID));
> -	pmd = clear_pmd_bit(pmd, __pgprot(PMD_SECT_VALID));
> +	/*
> +	 * If not valid then either we are already present-invalid or we are
> +	 * not-present (i.e. none or swap entry). We must not convert
> +	 * not-present to present-invalid. Unbelievably, the core-mm may call
> +	 * pmd_mkinvalid() for a swap entry and all other arches can handle it.
> +	 */
> +	if (pmd_valid(pmd)) {
> +		pmd = set_pmd_bit(pmd, __pgprot(PMD_PRESENT_INVALID));
> +		pmd = clear_pmd_bit(pmd, __pgprot(PMD_SECT_VALID));
> +	}
> 
>  	return pmd;
>  }
> diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
> index 65c19025da3d..7e9c387d06b0 100644
> --- a/mm/debug_vm_pgtable.c
> +++ b/mm/debug_vm_pgtable.c
> @@ -956,6 +956,65 @@ static void __init hugetlb_basic_tests(struct pgtable_debug_args *args) { }
>  #endif /* CONFIG_HUGETLB_PAGE */
> 
>  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
> +#if !defined(__HAVE_ARCH_PMDP_INVALIDATE) && defined(CONFIG_ARCH_ENABLE_THP_MIGRATION)
> +static void __init swp_pmd_mkinvalid_tests(struct pgtable_debug_args *args)
> +{

Printing various values at different locations in this function for debug:

> +	unsigned long max_swap_offset;
> +	swp_entry_t swp_set, swp_clear, swp_convert;
> +	pmd_t pmd_set, pmd_clear;
> +
> +	/*
> +	 * See generic_max_swapfile_size(): probe the maximum offset, then
> +	 * create swap entry will all possible bits set and a swap entry will
> +	 * all bits clear.
> +	 */
> +	max_swap_offset = swp_offset(pmd_to_swp_entry(swp_entry_to_pmd(swp_entry(0, ~0UL))));
> +	swp_set = swp_entry((1 << MAX_SWAPFILES_SHIFT) - 1, max_swap_offset);
> +	swp_clear = swp_entry(0, 0);
> +
> +	/* Convert to pmd. */
> +	pmd_set = swp_entry_to_pmd(swp_set);
> +	pmd_clear = swp_entry_to_pmd(swp_clear);

[    0.702163] debug_vm_pgtable: [swp_pmd_mkinvalid_tests  ]: valid: pmd_set=f800000000000000, pmd_clear=7fffffffffffe00

> +
> +	/*
> +	 * Sanity check that the pmds are not-present, not-huge and swap entry
> +	 * is recoverable without corruption.
> +	 */
> +	WARN_ON(pmd_present(pmd_set));
> +	WARN_ON(pmd_trans_huge(pmd_set));
> +	swp_convert = pmd_to_swp_entry(pmd_set);
> +	WARN_ON(swp_type(swp_set) != swp_type(swp_convert));
> +	WARN_ON(swp_offset(swp_set) != swp_offset(swp_convert));
> +	WARN_ON(pmd_present(pmd_clear));
> +	WARN_ON(pmd_trans_huge(pmd_clear));
> +	swp_convert = pmd_to_swp_entry(pmd_clear);
> +	WARN_ON(swp_type(swp_clear) != swp_type(swp_convert));
> +	WARN_ON(swp_offset(swp_clear) != swp_offset(swp_convert));
> +
> +	/* Now invalidate the pmd. */
> +	pmd_set = pmd_mkinvalid(pmd_set);
> +	pmd_clear = pmd_mkinvalid(pmd_clear);

[    0.704452] debug_vm_pgtable: [swp_pmd_mkinvalid_tests  ]: invalid: pmd_set=f800000000000000, pmd_clear=7ffffffffe00e00

> +
> +	/*
> +	 * Since its a swap pmd, invalidation should effectively be a noop and
> +	 * the checks we already did should give the same answer. Check the
> +	 * invalidation didn't corrupt any fields.
> +	 */
> +	WARN_ON(pmd_present(pmd_set));
> +	WARN_ON(pmd_trans_huge(pmd_set));
> +	swp_convert = pmd_to_swp_entry(pmd_set);

[    0.706461] debug_vm_pgtable: [swp_pmd_mkinvalid_tests  ]: set: swp=7c03ffffffffffff (1f, 3ffffffffffff), convert=7c03ffffffffffff (1f, 3ffffffffffff)

> +	WARN_ON(swp_type(swp_set) != swp_type(swp_convert));
> +	WARN_ON(swp_offset(swp_set) != swp_offset(swp_convert));
> +	WARN_ON(pmd_present(pmd_clear));
> +	WARN_ON(pmd_trans_huge(pmd_clear));
> +	swp_convert = pmd_to_swp_entry(pmd_clear);

[    0.708841] debug_vm_pgtable: [swp_pmd_mkinvalid_tests  ]: clear: swp=0 (0, 0), convert=ff8 (0, ff8)

> +	WARN_ON(swp_type(swp_clear) != swp_type(swp_convert));
> +	WARN_ON(swp_offset(swp_clear) != swp_offset(swp_convert));

This line fails on x86_64.

The logs show that the offset is indeed being corrupted by pmd_mkinvalid(); 0 -> 0xff8.

I think this is due to x86's pmd_mkinvalid() assuming the pmd is present; pmd_flags() and pmd_pfn() do all sorts of weird and wonderful things.

So does this take us full circle? Are we now back to modifying the core-mm to never call pmd_mkinvalid() on a non-present entry? If so, then I guess we should remove the arm64 fix from for-next/fixes.

> +}
> +#else
> +static void __init swp_pmd_mkinvalid_tests(struct pgtable_debug_args *args) { }
> +#endif /* !__HAVE_ARCH_PMDP_INVALIDATE && CONFIG_ARCH_ENABLE_THP_MIGRATION */
> +
>  static void __init pmd_thp_tests(struct pgtable_debug_args *args)
>  {
>  	pmd_t pmd;
> @@ -982,6 +1041,8 @@ static void __init pmd_thp_tests(struct pgtable_debug_args *args)
>  	WARN_ON(!pmd_trans_huge(pmd_mkinvalid(pmd_mkhuge(pmd))));
>  	WARN_ON(!pmd_present(pmd_mkinvalid(pmd_mkhuge(pmd))));
>  #endif /* __HAVE_ARCH_PMDP_INVALIDATE */
> +
> +	swp_pmd_mkinvalid_tests(args);
>  }
> 
>  #ifdef CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD
> --
> 2.25.1
> 



  parent reply	other threads:[~2024-05-01 11:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-30 13:31 Ryan Roberts
2024-04-30 13:55 ` Will Deacon
2024-04-30 14:04   ` Ryan Roberts
2024-04-30 16:23     ` Catalin Marinas
2024-04-30 16:25       ` Ryan Roberts
2024-04-30 15:00 ` Zi Yan
2024-04-30 17:57 ` Catalin Marinas
2024-05-01  8:05   ` Ryan Roberts
2024-05-01 10:04     ` Catalin Marinas
2024-05-01 10:13       ` Ryan Roberts
2024-05-02 18:00   ` Catalin Marinas
2024-05-01 11:35 ` Ryan Roberts [this message]
2024-05-01 11:38   ` Ryan Roberts
2024-05-01 12:07     ` Zi Yan
2024-05-01 12:58       ` Ryan Roberts

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9fb15315-6317-4bf4-a736-a8a44288b0c2@arm.com \
    --to=ryan.roberts@arm.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@kernel.org \
    --cc=anshuman.khandual@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mark.rutland@arm.com \
    --cc=stable@vger.kernel.org \
    --cc=will@kernel.org \
    --cc=zi.yan@cs.rutgers.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox