linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
To: Dev Jain <dev.jain@arm.com>
Cc: akpm@linux-foundation.org, ryan.roberts@arm.com,
	david@redhat.com, willy@infradead.org, linux-mm@kvack.org,
	linux-kernel@vger.kernel.org, catalin.marinas@arm.com,
	will@kernel.org, Liam.Howlett@oracle.com, vbabka@suse.cz,
	jannh@google.com, anshuman.khandual@arm.com, peterx@redhat.com,
	joey.gouly@arm.com, ioworker0@gmail.com, baohua@kernel.org,
	kevin.brodsky@arm.com, quic_zhenhuah@quicinc.com,
	christophe.leroy@csgroup.eu, yangyicong@hisilicon.com,
	linux-arm-kernel@lists.infradead.org, hughd@google.com,
	yang@os.amperecomputing.com, ziy@nvidia.com
Subject: Re: [PATCH v5 3/7] mm: Add batched versions of ptep_modify_prot_start/commit
Date: Fri, 18 Jul 2025 18:05:10 +0100	[thread overview]
Message-ID: <9e0382d0-0a21-4b79-bd07-374729358ebc@lucifer.local> (raw)
In-Reply-To: <20250718090244.21092-4-dev.jain@arm.com>

On Fri, Jul 18, 2025 at 02:32:40PM +0530, Dev Jain wrote:
> Batch ptep_modify_prot_start/commit in preparation for optimizing mprotect,
> implementing them as a simple loop over the corresponding single pte
> helpers. Architecture may override these helpers.
>
> Signed-off-by: Dev Jain <dev.jain@arm.com>

LGTM, so:

Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>

> ---
>  include/linux/pgtable.h | 84 ++++++++++++++++++++++++++++++++++++++++-
>  mm/mprotect.c           |  4 +-
>  2 files changed, 85 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/pgtable.h b/include/linux/pgtable.h
> index cf1515c163e2..e3b99920be05 100644
> --- a/include/linux/pgtable.h
> +++ b/include/linux/pgtable.h
> @@ -1331,7 +1331,9 @@ static inline pte_t ptep_modify_prot_start(struct vm_area_struct *vma,
>
>  /*
>   * Commit an update to a pte, leaving any hardware-controlled bits in
> - * the PTE unmodified.
> + * the PTE unmodified. The pte returned from ptep_modify_prot_start() may
> + * additionally have young and/or dirty bits set where previously they were not,
> + * so the updated pte may have these additional changes.
>   */
>  static inline void ptep_modify_prot_commit(struct vm_area_struct *vma,
>  					   unsigned long addr,
> @@ -1340,6 +1342,86 @@ static inline void ptep_modify_prot_commit(struct vm_area_struct *vma,
>  	__ptep_modify_prot_commit(vma, addr, ptep, pte);
>  }
>  #endif /* __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION */
> +
> +/**
> + * modify_prot_start_ptes - Start a pte protection read-modify-write transaction
> + * over a batch of ptes, which protects against asynchronous hardware
> + * modifications to the ptes. The intention is not to prevent the hardware from
> + * making pte updates, but to prevent any updates it may make from being lost.
> + * Please see the comment above ptep_modify_prot_start() for full description.
> + *
> + * @vma: The virtual memory area the pages are mapped into.
> + * @addr: Address the first page is mapped at.
> + * @ptep: Page table pointer for the first entry.
> + * @nr: Number of entries.
> + *
> + * May be overridden by the architecture; otherwise, implemented as a simple
> + * loop over ptep_modify_prot_start(), collecting the a/d bits from each pte
> + * in the batch.
> + *
> + * Note that PTE bits in the PTE batch besides the PFN can differ.
> + *
> + * Context: The caller holds the page table lock.  The PTEs map consecutive
> + * pages that belong to the same folio. All other PTE bits must be identical for
> + * all PTEs in the batch except for young and dirty bits.  The PTEs are all in
> + * the same PMD.
> + */
> +#ifndef modify_prot_start_ptes
> +static inline pte_t modify_prot_start_ptes(struct vm_area_struct *vma,
> +		unsigned long addr, pte_t *ptep, unsigned int nr)
> +{
> +	pte_t pte, tmp_pte;
> +
> +	pte = ptep_modify_prot_start(vma, addr, ptep);
> +	while (--nr) {
> +		ptep++;
> +		addr += PAGE_SIZE;
> +		tmp_pte = ptep_modify_prot_start(vma, addr, ptep);
> +		if (pte_dirty(tmp_pte))
> +			pte = pte_mkdirty(pte);
> +		if (pte_young(tmp_pte))
> +			pte = pte_mkyoung(pte);
> +	}
> +	return pte;
> +}
> +#endif
> +
> +/**
> + * modify_prot_commit_ptes - Commit an update to a batch of ptes, leaving any
> + * hardware-controlled bits in the PTE unmodified.
> + *
> + * @vma: The virtual memory area the pages are mapped into.
> + * @addr: Address the first page is mapped at.
> + * @ptep: Page table pointer for the first entry.
> + * @old_pte: Old page table entry (for the first entry) which is now cleared.
> + * @pte: New page table entry to be set.
> + * @nr: Number of entries.
> + *
> + * May be overridden by the architecture; otherwise, implemented as a simple
> + * loop over ptep_modify_prot_commit().
> + *
> + * Context: The caller holds the page table lock. The PTEs are all in the same
> + * PMD. On exit, the set ptes in the batch map the same folio. The ptes set by
> + * ptep_modify_prot_start() may additionally have young and/or dirty bits set
> + * where previously they were not, so the updated ptes may have these
> + * additional changes.
> + */
> +#ifndef modify_prot_commit_ptes
> +static inline void modify_prot_commit_ptes(struct vm_area_struct *vma, unsigned long addr,
> +		pte_t *ptep, pte_t old_pte, pte_t pte, unsigned int nr)
> +{
> +	int i;
> +
> +	for (i = 0; i < nr; ++i, ++ptep, addr += PAGE_SIZE) {
> +		ptep_modify_prot_commit(vma, addr, ptep, old_pte, pte);
> +
> +		/* Advance PFN only, set same prot */
> +		old_pte = pte_next_pfn(old_pte);
> +		pte = pte_next_pfn(pte);
> +	}
> +}
> +#endif
> +
>  #endif /* CONFIG_MMU */
>
>  /*
> diff --git a/mm/mprotect.c b/mm/mprotect.c
> index 97adc62c50ab..4977f198168e 100644
> --- a/mm/mprotect.c
> +++ b/mm/mprotect.c
> @@ -204,7 +204,7 @@ static long change_pte_range(struct mmu_gather *tlb,
>  				}
>  			}
>
> -			oldpte = ptep_modify_prot_start(vma, addr, pte);
> +			oldpte = modify_prot_start_ptes(vma, addr, pte, nr_ptes);
>  			ptent = pte_modify(oldpte, newprot);
>
>  			if (uffd_wp)
> @@ -230,7 +230,7 @@ static long change_pte_range(struct mmu_gather *tlb,
>  			    can_change_pte_writable(vma, addr, ptent))
>  				ptent = pte_mkwrite(ptent, vma);
>
> -			ptep_modify_prot_commit(vma, addr, pte, oldpte, ptent);
> +			modify_prot_commit_ptes(vma, addr, pte, oldpte, ptent, nr_ptes);
>  			if (pte_needs_flush(oldpte, ptent))
>  				tlb_flush_pte_range(tlb, addr, PAGE_SIZE);
>  			pages++;
> --
> 2.30.2
>


  reply	other threads:[~2025-07-18 17:05 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-18  9:02 [PATCH v5 0/7] Optimize mprotect() for large folios Dev Jain
2025-07-18  9:02 ` [PATCH v5 1/7] mm: Refactor MM_CP_PROT_NUMA skipping case into new function Dev Jain
2025-07-18 16:19   ` Lorenzo Stoakes
2025-07-20 23:44   ` Barry Song
2025-07-21  3:44     ` Dev Jain
2025-07-22 11:05       ` Dev Jain
2025-07-22 11:25   ` Ryan Roberts
2025-07-23 13:57   ` Zi Yan
2025-07-18  9:02 ` [PATCH v5 2/7] mm: Optimize mprotect() for MM_CP_PROT_NUMA by batch-skipping PTEs Dev Jain
2025-07-18 16:40   ` Lorenzo Stoakes
2025-07-22 11:26   ` Ryan Roberts
2025-07-23 14:25   ` Zi Yan
2025-07-18  9:02 ` [PATCH v5 3/7] mm: Add batched versions of ptep_modify_prot_start/commit Dev Jain
2025-07-18 17:05   ` Lorenzo Stoakes [this message]
2025-07-20 23:59   ` Barry Song
2025-07-22 11:35   ` Ryan Roberts
2025-07-23 15:09   ` Zi Yan
2025-07-18  9:02 ` [PATCH v5 4/7] mm: Introduce FPB_RESPECT_WRITE for PTE batching infrastructure Dev Jain
2025-07-18 17:12   ` Lorenzo Stoakes
2025-07-22 11:37   ` Ryan Roberts
2025-07-23 15:28   ` Zi Yan
2025-07-23 15:32     ` Dev Jain
2025-07-18  9:02 ` [PATCH v5 5/7] mm: Split can_change_pte_writable() into private and shared parts Dev Jain
2025-07-18 17:27   ` Lorenzo Stoakes
2025-07-23 15:40   ` Zi Yan
2025-07-18  9:02 ` [PATCH v5 6/7] mm: Optimize mprotect() by PTE batching Dev Jain
2025-07-18 18:49   ` Lorenzo Stoakes
2025-07-19 13:46     ` Dev Jain
2025-07-20 11:20       ` Lorenzo Stoakes
2025-07-20 14:39         ` Dev Jain
2025-07-24 19:55   ` Zi Yan
2025-08-06  8:08   ` David Hildenbrand
2025-08-06  8:12     ` David Hildenbrand
2025-08-06  8:15     ` Will Deacon
2025-08-06  8:19       ` David Hildenbrand
2025-08-06  8:53     ` Dev Jain
2025-08-06  8:56       ` David Hildenbrand
2025-08-06  9:12     ` Lorenzo Stoakes
2025-08-06  9:21       ` David Hildenbrand
2025-08-06  9:37         ` Dev Jain
2025-08-06  9:50           ` Lorenzo Stoakes
2025-08-06 10:04             ` Dev Jain
2025-08-06 10:07               ` Dev Jain
2025-08-06 10:12               ` David Hildenbrand
2025-08-06 10:11             ` David Hildenbrand
2025-08-06 10:20               ` Dev Jain
2025-08-06 10:28                 ` David Hildenbrand
2025-08-06 10:45                 ` Lorenzo Stoakes
2025-08-06 10:45               ` Lorenzo Stoakes
2025-07-18  9:02 ` [PATCH v5 7/7] arm64: Add batched versions of ptep_modify_prot_start/commit Dev Jain
2025-07-18 18:50   ` Lorenzo Stoakes
2025-07-21 15:57   ` Catalin Marinas
2025-07-18  9:50 ` [PATCH v5 0/7] Optimize mprotect() for large folios Dev Jain
2025-07-18 18:53   ` Lorenzo Stoakes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=9e0382d0-0a21-4b79-bd07-374729358ebc@lucifer.local \
    --to=lorenzo.stoakes@oracle.com \
    --cc=Liam.Howlett@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=anshuman.khandual@arm.com \
    --cc=baohua@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=david@redhat.com \
    --cc=dev.jain@arm.com \
    --cc=hughd@google.com \
    --cc=ioworker0@gmail.com \
    --cc=jannh@google.com \
    --cc=joey.gouly@arm.com \
    --cc=kevin.brodsky@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=peterx@redhat.com \
    --cc=quic_zhenhuah@quicinc.com \
    --cc=ryan.roberts@arm.com \
    --cc=vbabka@suse.cz \
    --cc=will@kernel.org \
    --cc=willy@infradead.org \
    --cc=yang@os.amperecomputing.com \
    --cc=yangyicong@hisilicon.com \
    --cc=ziy@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox