Re: [lkp-robot] [x86/kconfig] 81d3871900: BUG:unable_to_handle_kernel

[Andrey Ryabinin <aryabinin@virtuozzo.com>]

On 10/13/2017 07:45 AM, Josh Poimboeuf wrote:
> On Thu, Oct 12, 2017 at 12:05:04PM -0500, Christopher Lameter wrote:
>> On Wed, 11 Oct 2017, Josh Poimboeuf wrote:
>>
>>> I failed to add the slab maintainers to CC on the last attempt.  Trying
>>> again.
>>
>>
>> Hmmm... Yea. SLOB is rarely used and tested. Good illustration of a simple
>> allocator and the K&R mechanism that was used in the early kernels.
>>
>>>> Adding the slub maintainers.  Is slob still supposed to work?
>>
>> Have not seen anyone using it in a decade or so.
>>
>> Does the same config with SLUB and slub_debug on the commandline run
>> cleanly?
>>
>>>> I have no idea how that crypto panic could could be related to slob, but
>>>> at least it goes away when I switch to slub.
>>
>> Can you run SLUB with full debug? specify slub_debug on the commandline or
>> set CONFIG_SLUB_DEBUG_ON
> 
> Oddly enough, with CONFIG_SLUB+slub_debug, I get the same crypto panic I
> got with CONFIG_SLOB.  The trapping instruction is:
> 
>   vmovdqa 0x140(%rdi),%xmm0


It's unaligned access. Look at %rdi. vmovdqa requires 16-byte alignment.
Apparently, something fed kmalloc()'ed data here. But kmalloc() guarantees only sizeof(unsigned long)
alignment. slub_debug changes slub's objects layout, so what happened to be 16-bytes aligned
without slub_debug, may become 8-byte aligned with slub_debg on.

   
> I'll try to bisect it tomorrow.  It at least goes back to v4.10.

Probably no point. I bet this bug always was here (since this code added).

This could be fixed by s/vmovdqa/vmovdqu change like bellow, but maybe the right fix
would be to align the data properly?

---
 arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
index 8fe6338bcc84..7fd5d9b568c7 100644
--- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
+++ b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S
@@ -155,8 +155,8 @@ LABEL skip_ %I
 .endr
 
 	# Find min length
-	vmovdqa _lens+0*16(state), %xmm0
-	vmovdqa _lens+1*16(state), %xmm1
+	vmovdqu _lens+0*16(state), %xmm0
+	vmovdqu _lens+1*16(state), %xmm1
 
 	vpminud %xmm1, %xmm0, %xmm2		# xmm2 has {D,C,B,A}
 	vpalignr $8, %xmm2, %xmm3, %xmm3	# xmm3 has {x,x,D,C}
@@ -176,8 +176,8 @@ LABEL skip_ %I
 	vpsubd	%xmm2, %xmm0, %xmm0
 	vpsubd	%xmm2, %xmm1, %xmm1
 
-	vmovdqa	%xmm0, _lens+0*16(state)
-	vmovdqa	%xmm1, _lens+1*16(state)
+	vmovdqu	%xmm0, _lens+0*16(state)
+	vmovdqu	%xmm1, _lens+1*16(state)
 
 	# "state" and "args" are the same address, arg1
 	# len is arg2
-- 
2.13.6



> I'm
> not really sure whether this panic is related to SLUB or SLOB at all.
> (Though the original panic reported upthread by the kernel test robot
> *does* look SLOB related.)
> 
>   general protection fault: 0000 [#1] PREEMPT SMP
>   Modules linked in:
>   CPU: 0 PID: 58 Comm: kworker/0:1 Not tainted 4.13.0 #81
>   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
>   Workqueue: crypto mcryptd_flusher
>   task: ffff880139108040 task.stack: ffffc9000082c000
>   RIP: 0010:skip_7+0x0/0x67
>   RSP: 0018:ffffc9000082fd88 EFLAGS: 00010246
>   RAX: ffff88013834172c RBX: 00000000f7654321 RCX: 0000000000000003
>   RDX: 0000000000000000 RSI: ffffffff81d254f9 RDI: ffff8801381b1a88
>   RBP: ffffc9000082fd90 R08: 0000000000000000 R09: 0000000000000001
>   R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff82392260
>   R13: ffff88013a7e6500 R14: 00000000fffb80f5 R15: 0000000000000000
>   FS:  0000000000000000(0000) GS:ffff88013a600000(0000) knlGS:0000000000000000
>   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>   CR2: 00007f88491ef914 CR3: 0000000001e11000 CR4: 00000000001406f0
>   Call Trace:
>    sha256_ctx_mgr_flush+0x28/0x30
>    sha256_mb_flusher+0x53/0x120
>    mcryptd_flusher+0xc4/0xf0
>    process_one_work+0x253/0x6b0
>    worker_thread+0x4d/0x3b0
>    ? preempt_count_sub+0x9b/0x100
>    kthread+0x133/0x150
>    ? process_one_work+0x6b0/0x6b0
>    ? kthread_create_on_node+0x70/0x70
>    ret_from_fork+0x2a/0x40
>   Code: 89 87 30 01 00 00 c7 87 58 01 00 00 ff ff ff ff 48 83 bf a0 01 00 00 00 75 11 48 89 87 38 01 00 00 c7 87 5c 01 00 00 ff ff ff ff <c5> f9 6f 87 40 01 00 00 c5 f9 6f 8f 50 01 00 00 c4 e2 79 3b d1
>   RIP: skip_7+0x0/0x67 RSP: ffffc9000082fd88
>   ---[ end trace d89a1613b7d1b8bc ]---
>   BUG: sleeping function called from invalid context at ./include/linux/percpu-rwsem.h:33
>   in_atomic(): 1, irqs_disabled(): 0, pid: 58, name: kworker/0:1
>   INFO: lockdep is turned off.
>   Preemption disabled at:
>   [<ffffffff81041933>] kernel_fpu_begin+0x13/0x20
>   CPU: 0 PID: 58 Comm: kworker/0:1 Tainted: G      D         4.13.0 #81
>   Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc26 04/01/2014
>   Workqueue: crypto mcryptd_flusher
>   Call Trace:
>    dump_stack+0x8e/0xcd
>    ___might_sleep+0x185/0x260
>    __might_sleep+0x4a/0x80
>    exit_signals+0x33/0x2d0
>    do_exit+0xb4/0xd80
>    ? kthread+0x133/0x150
>    rewind_stack_do_exit+0x17/0x20
>   note: kworker/0:1[58] exited with preempt_count 1
>   tsc: Refined TSC clocksource calibration: 2793.538 MHz
>   clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28446877189, max_idle_ns: 440795280878 ns
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>