linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Nadav Amit <namit@vmware.com>
Cc: Linux MM <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Mike Rapoport <rppt@linux.ibm.com>,
	Axel Rasmussen <axelrasmussen@google.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Andrew Cooper <andrew.cooper3@citrix.com>,
	Andy Lutomirski <luto@kernel.org>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Peter Xu <peterx@redhat.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Will Deacon <will@kernel.org>, Yu Zhao <yuzhao@google.com>,
	Nick Piggin <npiggin@gmail.com>
Subject: Re: [RFC PATCH 01/14] userfaultfd: set dirty and young on writeprotect
Date: Wed, 20 Jul 2022 20:00:19 +0200	[thread overview]
Message-ID: <97e82e31-2411-501e-d401-d175eb24642f@redhat.com> (raw)
In-Reply-To: <99AFB0A0-B2F8-420A-8164-1705EC14B255@vmware.com>

On 20.07.22 19:36, Nadav Amit wrote:
> On Jul 20, 2022, at 2:42 AM, David Hildenbrand <david@redhat.com> wrote:
> 
>> ⚠ External Email
>>
>> On 18.07.22 14:01, Nadav Amit wrote:
>>> From: Nadav Amit <namit@vmware.com>
>>>
>>> When userfaultfd makes a PTE writable, it can now change the PTE
>>> directly, in some cases, without going triggering a page-fault first.
>>> Yet, doing so might leave the PTE that was write-unprotected as old and
>>> clean. At least on x86, this would cause a >500 cycles overhead when the
>>> PTE is first accessed.
>>>
>>> Use MM_CP_WILL_NEED to set the PTE as young and dirty when userfaultfd
>>> gets a hint that the page is likely to be used. Avoid changing the PTE
>>> to young and dirty in other cases to avoid excessive writeback and
>>> messing with the page reclamation logic.
>>>
>>> Cc: Andrea Arcangeli <aarcange@redhat.com>
>>> Cc: Andrew Cooper <andrew.cooper3@citrix.com>
>>> Cc: Andrew Morton <akpm@linux-foundation.org>
>>> Cc: Andy Lutomirski <luto@kernel.org>
>>> Cc: Dave Hansen <dave.hansen@linux.intel.com>
>>> Cc: David Hildenbrand <david@redhat.com>
>>> Cc: Peter Xu <peterx@redhat.com>
>>> Cc: Peter Zijlstra <peterz@infradead.org>
>>> Cc: Thomas Gleixner <tglx@linutronix.de>
>>> Cc: Will Deacon <will@kernel.org>
>>> Cc: Yu Zhao <yuzhao@google.com>
>>> Cc: Nick Piggin <npiggin@gmail.com>
>>> ---
>>> include/linux/mm.h | 2 ++
>>> mm/mprotect.c | 9 ++++++++-
>>> mm/userfaultfd.c | 8 ++++++--
>>> 3 files changed, 16 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/include/linux/mm.h b/include/linux/mm.h
>>> index 9cc02a7e503b..4afd75ce5875 100644
>>> --- a/include/linux/mm.h
>>> +++ b/include/linux/mm.h
>>> @@ -1988,6 +1988,8 @@ extern unsigned long move_page_tables(struct vm_area_struct *vma,
>>> /* Whether this change is for write protecting */
>>> #define MM_CP_UFFD_WP (1UL << 2) /* do wp */
>>> #define MM_CP_UFFD_WP_RESOLVE (1UL << 3) /* Resolve wp */
>>> +/* Whether to try to mark entries as dirty as they are to be written */
>>> +#define MM_CP_WILL_NEED (1UL << 4)
>>> #define MM_CP_UFFD_WP_ALL (MM_CP_UFFD_WP | \
>>> MM_CP_UFFD_WP_RESOLVE)
>>>
>>> diff --git a/mm/mprotect.c b/mm/mprotect.c
>>> index 996a97e213ad..34c2dfb68c42 100644
>>> --- a/mm/mprotect.c
>>> +++ b/mm/mprotect.c
>>> @@ -82,6 +82,7 @@ static unsigned long change_pte_range(struct mmu_gather *tlb,
>>> bool prot_numa = cp_flags & MM_CP_PROT_NUMA;
>>> bool uffd_wp = cp_flags & MM_CP_UFFD_WP;
>>> bool uffd_wp_resolve = cp_flags & MM_CP_UFFD_WP_RESOLVE;
>>> + bool will_need = cp_flags & MM_CP_WILL_NEED;
>>>
>>> tlb_change_page_size(tlb, PAGE_SIZE);
>>>
>>> @@ -172,6 +173,9 @@ static unsigned long change_pte_range(struct mmu_gather *tlb,
>>> ptent = pte_clear_uffd_wp(ptent);
>>> }
>>>
>>> + if (will_need)
>>> + ptent = pte_mkyoung(ptent);
>>> +
>>> /*
>>> * In some writable, shared mappings, we might want
>>> * to catch actual write access -- see
>>> @@ -187,8 +191,11 @@ static unsigned long change_pte_range(struct mmu_gather *tlb,
>>> */
>>> if ((cp_flags & MM_CP_TRY_CHANGE_WRITABLE) &&
>>> !pte_write(ptent) &&
>>
>>
>> Why would we want to check if we can set something writable if it
>> already *is* writable? That doesn't make sense to me.
> 
> We check !pte_write(). What am I missing in your question?

My patch review skills have seen better days. I thought you'd be
removing the pte_write() check ... :( Tired eyes ...

> 
> Having said that, I do notice now that pte_mkdirty() should not be done
> only this condition is fulfilled. Instead we should just have
> something like:
> 
>                        if (will_need) {
>                                ptent = pte_mkyoung(ptent);
>                                if (pte_write(ptent))
>                                        ptent = pte_mkdirty(ptent);
>                        }

As can_change_pte_writable() will fail if it stumbles over a !pte_dirty
page in current code ... so I assume you would have that code before the
actual pte_mkwrite() logic, correct?

-- 
Thanks,

David / dhildenb



  reply	other threads:[~2022-07-20 18:00 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20220718120212.3180-1-namit@vmware.com>
2022-07-18 12:01 ` Nadav Amit
2022-07-19 20:47   ` Peter Xu
2022-07-20  9:39     ` David Hildenbrand
2022-07-20 13:10       ` Peter Xu
2022-07-20 15:10         ` David Hildenbrand
2022-07-20 19:15           ` Peter Xu
2022-07-20 19:33             ` David Hildenbrand
2022-07-20 19:48               ` Peter Xu
2022-07-20 19:55                 ` David Hildenbrand
2022-07-20 20:22                   ` Nadav Amit
2022-07-20 20:38                     ` David Hildenbrand
2022-07-20 20:56                       ` Nadav Amit
2022-07-21  7:52                         ` David Hildenbrand
2022-07-21 14:10                           ` David Hildenbrand
2022-07-20  9:42   ` David Hildenbrand
2022-07-20 17:36     ` Nadav Amit
2022-07-20 18:00       ` David Hildenbrand [this message]
2022-07-20 18:09         ` Nadav Amit
2022-07-20 18:11           ` David Hildenbrand
2022-07-18 12:02 ` [RFC PATCH 02/14] userfaultfd: try to map write-unprotected pages Nadav Amit
2022-07-19 20:49   ` Peter Xu
2022-07-18 12:02 ` [RFC PATCH 03/14] mm/mprotect: allow exclusive anon pages to be writable Nadav Amit
2022-07-20 15:19   ` David Hildenbrand
2022-07-20 17:25     ` Nadav Amit
2022-07-21  7:45       ` David Hildenbrand
2022-07-18 12:02 ` [RFC PATCH 04/14] mm/mprotect: preserve write with MM_CP_TRY_CHANGE_WRITABLE Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 06/14] mm/rmap: avoid flushing on page_vma_mkclean_one() when possible Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 07/14] mm: do fix spurious page-faults for instruction faults Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 08/14] x86/mm: introduce flush_tlb_fix_spurious_fault Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 10/14] x86/mm: introduce relaxed TLB flushes Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 11/14] x86/mm: use relaxed TLB flushes when protection is removed Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 12/14] x86/tlb: no flush on PTE change from RW->RO when PTE is clean Nadav Amit
2022-07-18 12:02 ` [RFC PATCH 14/14] mm: conditional check of pfn in pte_flush_type Nadav Amit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=97e82e31-2411-501e-d401-d175eb24642f@redhat.com \
    --to=david@redhat.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrew.cooper3@citrix.com \
    --cc=axelrasmussen@google.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=luto@kernel.org \
    --cc=namit@vmware.com \
    --cc=npiggin@gmail.com \
    --cc=peterx@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rppt@linux.ibm.com \
    --cc=tglx@linutronix.de \
    --cc=will@kernel.org \
    --cc=yuzhao@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox