linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: David Hildenbrand <david@redhat.com>
To: Usama Arif <usamaarif642@gmail.com>,
	akpm@linux-foundation.org, linux-mm@kvack.org
Cc: hannes@cmpxchg.org, riel@surriel.com, shakeel.butt@linux.dev,
	roman.gushchin@linux.dev, yuzhao@google.com, baohua@kernel.org,
	ryan.roberts@arm.com, rppt@kernel.org, willy@infradead.org,
	cerasuolodomenico@gmail.com, corbet@lwn.net,
	linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org,
	kernel-team@meta.com
Subject: Re: [PATCH 0/6] mm: split underutilized THPs
Date: Tue, 30 Jul 2024 18:11:49 +0200	[thread overview]
Message-ID: <95ed1631-ff62-4627-8dc6-332096e673b4@redhat.com> (raw)
In-Reply-To: <73b97a03-3742-472f-9a36-26ba9009d715@gmail.com>

On 30.07.24 17:19, Usama Arif wrote:
> 
> 
> On 30/07/2024 16:14, Usama Arif wrote:
>>
>>
>> On 30/07/2024 15:35, David Hildenbrand wrote:
>>> On 30.07.24 14:45, Usama Arif wrote:
>>>> The current upstream default policy for THP is always. However, Meta
>>>> uses madvise in production as the current THP=always policy vastly
>>>> overprovisions THPs in sparsely accessed memory areas, resulting in
>>>> excessive memory pressure and premature OOM killing.
>>>> Using madvise + relying on khugepaged has certain drawbacks over
>>>> THP=always. Using madvise hints mean THPs aren't "transparent" and
>>>> require userspace changes. Waiting for khugepaged to scan memory and
>>>> collapse pages into THP can be slow and unpredictable in terms of performance
>>>> (i.e. you dont know when the collapse will happen), while production
>>>> environments require predictable performance. If there is enough memory
>>>> available, its better for both performance and predictability to have
>>>> a THP from fault time, i.e. THP=always rather than wait for khugepaged
>>>> to collapse it, and deal with sparsely populated THPs when the system is
>>>> running out of memory.
>>>>
>>>> This patch-series is an attempt to mitigate the issue of running out of
>>>> memory when THP is always enabled. During runtime whenever a THP is being
>>>> faulted in or collapsed by khugepaged, the THP is added to a list.
>>>> Whenever memory reclaim happens, the kernel runs the deferred_split
>>>> shrinker which goes through the list and checks if the THP was underutilized,
>>>> i.e. how many of the base 4K pages of the entire THP were zero-filled.
>>>> If this number goes above a certain threshold, the shrinker will attempt
>>>> to split that THP. Then at remap time, the pages that were zero-filled are
>>>> not remapped, hence saving memory. This method avoids the downside of
>>>> wasting memory in areas where THP is sparsely filled when THP is always
>>>> enabled, while still providing the upside THPs like reduced TLB misses without
>>>> having to use madvise.
>>>>
>>>> Meta production workloads that were CPU bound (>99% CPU utilzation) were
>>>> tested with THP shrinker. The results after 2 hours are as follows:
>>>>
>>>>                               | THP=madvise |  THP=always   | THP=always
>>>>                               |             |               | + shrinker series
>>>>                               |             |               | + max_ptes_none=409
>>>> -----------------------------------------------------------------------------
>>>> Performance improvement     |      -      |    +1.8%      |     +1.7%
>>>> (over THP=madvise)          |             |               |
>>>> -----------------------------------------------------------------------------
>>>> Memory usage                |    54.6G    | 58.8G (+7.7%) |   55.9G (+2.4%)
>>>> -----------------------------------------------------------------------------
>>>> max_ptes_none=409 means that any THP that has more than 409 out of 512
>>>> (80%) zero filled filled pages will be split.
>>>>
>>>> To test out the patches, the below commands without the shrinker will
>>>> invoke OOM killer immediately and kill stress, but will not fail with
>>>> the shrinker:
>>>>
>>>> echo 450 > /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none
>>>> mkdir /sys/fs/cgroup/test
>>>> echo $$ > /sys/fs/cgroup/test/cgroup.procs
>>>> echo 20M > /sys/fs/cgroup/test/memory.max
>>>> echo 0 > /sys/fs/cgroup/test/memory.swap.max
>>>> # allocate twice memory.max for each stress worker and touch 40/512 of
>>>> # each THP, i.e. vm-stride 50K.
>>>> # With the shrinker, max_ptes_none of 470 and below won't invoke OOM
>>>> # killer.
>>>> # Without the shrinker, OOM killer is invoked immediately irrespective
>>>> # of max_ptes_none value and kill stress.
>>>> stress --vm 1 --vm-bytes 40M --vm-stride 50K
>>>>
>>>> Patches 1-2 add back helper functions that were previously removed
>>>> to operate on page lists (needed by patch 3).
>>>> Patch 3 is an optimization to free zapped tail pages rather than
>>>> waiting for page reclaim or migration.
>>>> Patch 4 is a prerequisite for THP shrinker to not remap zero-filled
>>>> subpages when splitting THP.
>>>> Patches 6 adds support for THP shrinker.
>>>>
>>>> (This patch-series restarts the work on having a THP shrinker in kernel
>>>> originally done in
>>>> https://lore.kernel.org/all/cover.1667454613.git.alexlzhu@fb.com/.
>>>> The THP shrinker in this series is significantly different than the
>>>> original one, hence its labelled v1 (although the prerequisite to not
>>>> remap clean subpages is the same).)
>>>
>>> As shared previously, there is one issue with uffd (even when currently not active for a VMA!), where we must not zap present page table entries.
>>>
>>> Something that is always possible (assuming no GUP pins of course, which) is replacing the zero-filled subpages by shared zeropages.
>>>
>>> Is that being done in this patch set already, or are we creating pte_none() entries?
>>>
>>
>> I think thats done in Patch 4/6. In function try_to_unmap_unused, we have below which I think does what you are suggesting? i.e. point to shared zeropage and not clear pte for uffd armed vma.
>>
>> 	if (userfaultfd_armed(pvmw->vma)) {
>> 		newpte = pte_mkspecial(pfn_pte(page_to_pfn(ZERO_PAGE(pvmw->address)),
>> 					       pvmw->vma->vm_page_prot));
>> 		ptep_clear_flush(pvmw->vma, pvmw->address, pvmw->pte);
>> 		set_pte_at(pvmw->vma->vm_mm, pvmw->address, pvmw->pte, newpte);
>> 	}
> 
> 
> Ah are you suggesting userfaultfd_armed(pvmw->vma) will evaluate to false even if its uffd? I think something like below would work in that case.

I remember one ugly case in QEMU with postcopy live-migration where we 
must not zap zero-filled pages. I am not 100% regarding THP (if it could 
be enabled at that point), but imagine the following

1) mmap(), enable THP
2) Migrate a bunch of pages from the source during precopy (writing to
    the memory). Might end up creating THPs (during fault/khugepaged)
3) Register UFFD on the VMA
4) Disable new THPs from forming via MADV_NOHUGEPAGE on the VMA
5) Discard any pages that have been re-dirtied or not migrated yet
6) Migrate-on-demand any holes using uffd


If we discard zero-filled pages between 2) and 3) we might get wrong 
uffd notifications in 6 for pages that have already been migrated).

I'll have to check if that actually happens in that sequence in QEMU: if 
QEMU would disable THP right before 2) we would be safe. But I recall 
that it is not the case :/


-- 
Cheers,

David / dhildenb



  reply	other threads:[~2024-07-30 16:11 UTC|newest]

Thread overview: 40+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-07-30 12:45 Usama Arif
2024-07-30 12:45 ` [PATCH 1/6] Revert "memcg: remove mem_cgroup_uncharge_list()" Usama Arif
2024-07-30 12:45 ` [PATCH 2/6] Revert "mm: remove free_unref_page_list()" Usama Arif
2024-07-30 12:46 ` [PATCH 3/6] mm: free zapped tail pages when splitting isolated thp Usama Arif
2024-07-30 15:14   ` David Hildenbrand
2024-08-04 19:02     ` Usama Arif
2024-08-05  9:00       ` David Hildenbrand
2024-08-06  9:58         ` Usama Arif
2024-07-30 12:46 ` [PATCH 4/6] mm: don't remap unused subpages " Usama Arif
2024-07-30 18:07   ` Rik van Riel
2024-07-31 17:08     ` Usama Arif
2024-07-30 12:46 ` [PATCH 5/6] mm: add selftests to split_huge_page() to verify unmap/zap of zero pages Usama Arif
2024-07-30 18:10   ` Rik van Riel
2024-08-01  4:45   ` kernel test robot
2024-07-30 12:46 ` [PATCH 6/6] mm: split underutilized THPs Usama Arif
2024-07-30 13:59   ` Randy Dunlap
2024-07-30 14:35 ` [PATCH 0/6] " David Hildenbrand
2024-07-30 15:14   ` Usama Arif
2024-07-30 15:19     ` Usama Arif
2024-07-30 16:11       ` David Hildenbrand [this message]
2024-07-30 17:22         ` Usama Arif
2024-07-30 20:25           ` David Hildenbrand
2024-07-31 17:01             ` Usama Arif
2024-07-31 17:51               ` David Hildenbrand
2024-07-31 20:41                 ` Usama Arif
2024-08-01  6:36                   ` David Hildenbrand
2024-08-04 23:04                     ` Usama Arif
     [not found]                     ` <20240806172830.GD322282@cmpxchg.org>
2024-08-06 17:33                       ` David Hildenbrand
2024-08-01  6:09 ` Yu Zhao
2024-08-01 15:47   ` David Hildenbrand
2024-08-04 21:54     ` Yu Zhao
2024-08-05  1:32       ` Rik van Riel
2024-08-05 19:51         ` Yu Zhao
2024-08-01 16:22   ` Usama Arif
2024-08-01 16:27     ` David Hildenbrand
2024-08-04 19:10       ` Usama Arif
2024-08-04 23:32       ` Yu Zhao
2024-08-04 23:23     ` Yu Zhao
2024-08-06 11:18       ` Usama Arif
2024-08-06 17:38   ` Johannes Weiner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=95ed1631-ff62-4627-8dc6-332096e673b4@redhat.com \
    --to=david@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=baohua@kernel.org \
    --cc=cerasuolodomenico@gmail.com \
    --cc=corbet@lwn.net \
    --cc=hannes@cmpxchg.org \
    --cc=kernel-team@meta.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=riel@surriel.com \
    --cc=roman.gushchin@linux.dev \
    --cc=rppt@kernel.org \
    --cc=ryan.roberts@arm.com \
    --cc=shakeel.butt@linux.dev \
    --cc=usamaarif642@gmail.com \
    --cc=willy@infradead.org \
    --cc=yuzhao@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox