linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: "Huang\, Ying" <ying.huang@intel.com>
To: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Vlastimil Babka <vbabka@suse.cz>,
	Jerome Marchand <jmarchan@redhat.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Ebru Akagunduz <ebru.akagunduz@gmail.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] MADVISE_FREE, THP: Fix madvise_free_huge_pmd return value after splitting
Date: Mon, 20 Jun 2016 08:48:17 -0700	[thread overview]
Message-ID: <87bn2vamke.fsf@yhuang-mobile.sh.intel.com> (raw)
In-Reply-To: <20160620001519.GC3194@blaptop> (Minchan Kim's message of "Mon, 20 Jun 2016 09:15:19 +0900")

Minchan Kim <minchan@kernel.org> writes:

> On Fri, Jun 17, 2016 at 12:45:43PM -0700, Huang, Ying wrote:
>> Minchan Kim <minchan@kernel.org> writes:
>> 
>> > Hi,
>> >
>> > On Thu, Jun 16, 2016 at 08:03:54PM -0700, Huang, Ying wrote:
>> >> From: Huang Ying <ying.huang@intel.com>
>> >> 
>> >> madvise_free_huge_pmd should return 0 if the fallback PTE operations are
>> >> required.  In madvise_free_huge_pmd, if part pages of THP are discarded,
>> >> the THP will be split and fallback PTE operations should be used if
>> >> splitting succeeds.  But the original code will make fallback PTE
>> >> operations skipped, after splitting succeeds.  Fix that via make
>> >> madvise_free_huge_pmd return 0 after splitting successfully, so that the
>> >> fallback PTE operations will be done.
>> >
>> > You're right. Thanks!
>> >
>> >> 
>> >> Know issues: if my understanding were correct, return 1 from
>> >> madvise_free_huge_pmd means the following processing for the PMD should
>> >> be skipped, while return 0 means the following processing is still
>> >> needed.  So the function should return 0 only if the THP is split
>> >> successfully or the PMD is not trans huge.  But the pmd_trans_unstable
>> >> after madvise_free_huge_pmd guarantee the following processing will be
>> >> skipped for huge PMD.  So current code can run properly.  But if my
>> >> understanding were correct, we can clean up return code of
>> >> madvise_free_huge_pmd accordingly.
>> >
>> > I like your clean up. Just a minor comment below.
>> >
>> >> 
>> >> Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
>> >> ---
>> >>  mm/huge_memory.c | 7 +------
>> >>  1 file changed, 1 insertion(+), 6 deletions(-)
>> >> 
>> >> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
>> >> index 2ad52d5..64dc95d 100644
>> >> --- a/mm/huge_memory.c
>> >> +++ b/mm/huge_memory.c
>> >
>> > First of all, let's change ret from int to bool.
>> > And then, add description in the function entry.
>> 
>> Yes.  bool looks better than int.
>> 
>> > /*
>> >  * Return true if we do MADV_FREE successfully on entire pmd page.
>> >  * Otherwise, return false.
>> >  */
>> 
>> This way, we need to return false if we failed to split huge page, this
>> will cause unnecessary pmd_trans_unstable check.  How about to change
>> the comments to
>
> I focused the function name "madvise_free_huge_pmd". IOW, the function
> should free huge pmd page. If it is successful, done. Otherwise, next
> routines should handle it.
>
> If it fail to split, pmd_trans_unstable will check it and return.
> I don't think it's heavy operation to affect performance so rather
> than making function fast, I wanted to make it simple by following
> function name.

Reasonable.  Will do that.

Best Regards,
Huang, Ying

>> 
>> /*
>>  * Return true if we finished processing entire pmd page and needn't
>>  * fall back pte processing.  Otherwise, return false.
>>  */
>> 
>> Best Regards,
>> Huang, Ying
>> 
>> > And do not set to 1 if it is huge_zero_pmd but just goto out to
>> > return false.
>> >
>> > Thanks!
>> >
>> >> @@ -1655,14 +1655,9 @@ int madvise_free_huge_pmd(struct mmu_gather *tlb, struct vm_area_struct *vma,
>> >>  	if (next - addr != HPAGE_PMD_SIZE) {
>> >>  		get_page(page);
>> >>  		spin_unlock(ptl);
>> >> -		if (split_huge_page(page)) {
>> >> -			put_page(page);
>> >> -			unlock_page(page);
>> >> -			goto out_unlocked;
>> >> -		}
>> >> +		split_huge_page(page);
>> >>  		put_page(page);
>> >>  		unlock_page(page);
>> >> -		ret = 1;
>> >>  		goto out_unlocked;
>> >>  	}
>> >>  
>> >> -- 
>> >> 2.8.1
>> >> 
>> >> --
>> >> To unsubscribe, send a message with 'unsubscribe linux-mm' in
>> >> the body to majordomo@kvack.org.  For more info on Linux MM,
>> >> see: http://www.linux-mm.org/ .
>> >> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

      reply	other threads:[~2016-06-20 15:48 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-17  3:03 Huang, Ying
2016-06-17  3:15 ` Huang, Ying
2016-06-17  5:31 ` Minchan Kim
2016-06-17 15:59   ` Huang, Ying
2016-06-19 23:54     ` Minchan Kim
2016-06-20 15:48       ` Huang, Ying
2016-06-17 19:45   ` Huang, Ying
2016-06-20  0:15     ` Minchan Kim
2016-06-20 15:48       ` Huang, Ying [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87bn2vamke.fsf@yhuang-mobile.sh.intel.com \
    --to=ying.huang@intel.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=ebru.akagunduz@gmail.com \
    --cc=jmarchan@redhat.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=minchan@kernel.org \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox